The products incorporate two check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3), a pressure reducing valve adjustable between 1.0 bar and 3.0 bar (but pre-set at 2.5 bar for 523.815 model and 1.4 bar for the 523.816 model). The product incorporates a push type valve which allows water to flow when operated until the required pressure is achieved. There is a drain port below the push valve piston chamber. Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum supply pressure 10.0 bar. Maximum operating temperature 80°C.

Section:

1015 Filling Loop

WRAS Approval Number:

250104713

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain port must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

15mm compression.

Marking:

Officine Rigamonti spa logo, (the letters ‘OR’ within an oval), flow arrow, CR mark, size and pressure cast on body. Date of manufacture (MMYY) laser etched on body.

Installation Requirements:

R001 R511

Expiry date:

31/01/2030

Model:

523.815, 523.816.

Approval Holder:

Officine Rigamonti spa

Company Name

Officine Rigamonti spa

Address

Località Molino Rastelli, 20 13018 Valduggia (VC)

Country

Italy

View All Listings by this Company

Manufacturer:

Officine Rigamonti Spa

Company Name

Officine Rigamonti Spa

Address

Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)

Country

Italy

Phone

+39 0163 48 165 Fax: +39 0163347254

View All Listings by this Company

Range of filters with DZR brass bodies, stainless steel sieve. All models incorporate a drain tap and are supplied with a pressure gauge. Maximum working pressure 25.0 bar. Cold water use only.

Section:

1050 Filters and Housings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” – 2” BSP (M).

Marking:

DR, size, flow arrow on the body and Resideo, technical information on the adhesive label.

Installation Requirements:

R001 R511 R110 R120

Expiry date:

30/11/2029

Model:

F76S-1/2AAM, F76S-3/4AAM, F76S-1AAM, F76S-11/4AAM, F76S-11/2AAM, F76S-2AAM, F76S-1/2ACM, F76S-3/4ACM, F76S-3/4AEM, F76S-1ACM, F76S-11/4ACM, F76S-11/2ACM, F76S-2ACM. Models added November 2025: F76S-1/2 LFAAM, F76S-3/4 LFAAM, F76S-1 LFAAM, F76S-11/4 LFAAM, F76S-11/2 LFAAM, F76S-2 LFAAM, F76S-1/2 LFACM, F76S-3/4 LFACM, F76S-3/4 LFAEM, F76S-1 LFACM, F76S-11/4 LFACM, F76S-11/2 LFACM, F76S-2 LFACM.

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

A range of black polyethylene electrofusion fittings from DN 20 to DN 1200 for use with PE100 and PE100-RC pipes conforming to EN 12201 or ISO 4427. A range of black polyethylene butt-welded fittings from DE 20 to DE 1200 fittings for use with PE100 and PE100-RC pipes conforming to EN 12201 or ISO 4427. Maximum working pressure: 20.0 bar for SDR 9 Maximum working pressure: 16.0 bar for SDR 11 Maximum working pressure: 10.0 bar for SDR 17. For above and below ground and cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241204003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Plastialia logo, DN, PE100-RC, model code hot stamped on fitting body

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

ELECTROFUSION FITTINGS PLASTFAST RANGE DN20 to DN400 PLAST RANGE DN450 to DN1200 BUTTWELDED FITTNGS PLAST RANGE DN 20 to DN1200 COUPLER MPXXXB - COUPLER SDR 17 - DN 90 – DN1200 MPXXXC - COUPLER SDR 11 - DN 20 – DN900 MPXXXG - COUPLER SDR 9 - DN 32 – DN450 ELBOW 90° GE9PXXXC - ELBOW 90° SDR 11 - DN 20 – DN315 ELBOW 45° GE4PXXXC - ELBOW 45° SDR 11 - DN 20 – DN 315 ELBOW 22.5° GE2250PXXXC - ELBOW 22,5° SDR 11 - DN 90 – DN 315 ELBOW 11,25° GE1125PXXXC - ELBOW 11,25° SDR 11 - DN 90 – DN 315 TEE 90° TEPXXXC - TEE 90° SDR 11 - DN 20 – DN 315 REDUCED TEE 90° TREPXXXC - REDUCED TEE 90° SDR 11 - DN 90 – DN 315 DN REDUCER REPXXXC - REDUCER SDR 11 - DN 25 – DN 315 END CAP CAEPXXXC - END CAP SDR 11 - DN 20 – DN 315 TAPPING TEE CPCPXXXC - TAPPING TEE SDR 11 - DN 40 – DN 315 CPCPVXXXC - VALVE TAPPING TEE SDR 11 - DN 63 – DN 315 SADDLE CPSPXXXC - SADDLE SDR11 – DN 20 – DN 900 SPIGOT END FITTING ADAPTER FOR FLANGES CPXXXB - ADATTATORE PER FLANGE SDR 17 - DN 90 – DN 1200 CPXXXC - ADATTATORE PER FLANGE SDR 11 - DN 20 – DN 900 CPXXXG - ADATTATORE PER FLANGE SDR 9 - DN 32 – DN 450 END CAPS CAPXXXB - END CAP SDR 17 - DN 90 – DN 1200 CAPXXXC - END CAP SDR 11 - DN 20 – DN 900 CAPXXXG - END CAP SDR 9 - DN 32 – DN 450 TEE 90° TPXXXB - TEE 90° SDR 17 - DN 90 – DN 630 TPXXXC - TEE 90° SDR 11 - DN 20 – DN 630 TPXXXG - TEE 90° FROM DE 63 TO DE 630 SDR 9 - DN 32 – DN 450 REDUCED TEE 90° TRPXXXB - REDUCED TEE 90° SDR 17 - DN 90 – DN 630 TRPXXXC - REDUCED TEE 90° SDR 11 - DN 90 – DN 630 TRPXXXG - REDUCED TEE 90° SDR 9 - DN 110 – DN 450 CROSS CRPXXXB - CROSS SDR 17 - DN 90 – DN 355 CRPXXXC - CROSS SDR 11 - DN 63 - DN, 355 TEES 45° T4PXXXB - TEE 45° SDR 17 - DN 90 – DN 160 T4PXXXC - TEE 45° SDR 11 - DN 20 – DN 160 ELBOW 90° G9PXXXB - ELBOW 90° SDR 17 - DN 90 – DN 630 G9PXXXC - ELBOW 90° SDR 11 - DN 20 – DN 630 G9PXXXG - ELBOW 90° SDR 9 - DN 63 – DN 450 ELBOW 45° G4PXXXB - ELBOW 45° SDR 17 - DN 90 – DN 630 G4PXXXC - ELBOW 45° SDR 11 - DN 20 – DN 630 G4PXXXG - ELBOW 45° SDR 9 - DN 63 – DN 450 DN REDUCER FITTINGS RPXXXB - REDUCER SDR 17 - DN 110 – DN 1200 RPXXXC - REDUCER SDR 11 - DN 25 – DN 900 RPXXXG - REDUCER SDR 9 - DN 250 – DN 450 TRANSITIONAL FITTINGS RTOMPXXXC - MALE TRANSITION PE/BRASS SDR 11 – DE 20x1/2”, 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” RTOFPXXXC - FEMALE TRANSITION PE/BRASS SDR 11 - DE 20x1/2”, 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” RTFZRPXXXC - MALE TRANSITION PE/STEEL SDR 11 - DE 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” 125x4”, 140x5”, 160x6”, 180x6”, 225x8”, 315x10” RTSRPXXXC - WELD TRANSITION PE/STEEL SDR 11 - DE 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” 125x4”, 140x5”, 160x6”, 180x6”, 225x8”, 315x10” First part explains the type of product (e.g. “M = coupler”, “GE9 = 90°elbow”, etc.) PXXXX is the dimension. B, C and G represent the different SDR.

Manufacturer:

Plastitalia SpA

Company Name

Plastitalia SpA

Address

Via Ferrara SNC, Brolo 98061

Country

Italy

View All Listings by this Company

Range of stainless steel press fittings: SS316L stainless steel models are for use with SS316L stainless steel pipe manufactured to EN 10312.; SS304 stainless steel models are for use with SS304 stainless steel pipe manufactured to EN 10312. Crimp joint is achieved by a M profile crimp jaws. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004035

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see mdoels

Marking:

IDC, Banninger, size and stainless-steel grade on body

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

Models ending L = SS316L stainless steel, models without L suffix = SS304 stainless steel. E.g. 2SAA011L = SS316L, 2SAA011 = SS304. 2SA6011-F 2SA6011L-F Full Crossover Coupler 15mm 2SA6022-F 2SA6022L-F Full Crossover Coupler 18mm 2SA6033-F 2SA6033L-F Full Crossover Coupler 22mm 2SA6044-F 2SA6044L-F Full Crossover Coupler 28mm 2SAA011 2SAA011L Equal coupling 15mm 2SAA022 2SAA022L Equal coupling 18mm 2SAA033 2SAA033L Equal coupling 22mm 2SAA044 2SAA044L Equal coupling 28mm 2SAA055 2SAA055L Equal coupling 35mm 2SAA066 2SAA066L Equal coupling 42mm 2SAA077 2SAA077L Equal coupling 54mm 2SAA088 2SAA088L Equal coupling 76.1mm 2SAA099 2SAA099L Equal coupling 88.9mm 2SAA1010 2SAA1010L Equal coupling 108mm 2SAB011 2SAB011L Elbow 15mm 2SAB022 2SAB022L Elbow 18mm 2SAB033 2SAB033L Elbow 22mm 2SAB044 2SAB044L Elbow 28mm 2SAB055 2SAB055L Elbow 35mm 2SAB066 2SAB066L Elbow 42mm 2SAB077 2SAB077L Elbow 54mm 2SAB088 2SAB088L Elbow 76.1mm 2SAB099 2SAB099L Elbow 88.9mm 2SAB1010 2SAB1010L Elbow 108mm 2SAC111 2SAC111L Equal Tee 15mm 2SAC222 2SAC222L Equal Tee 18mm 2SAC333 2SAC333L Equal Tee 22mm 2SAC444 2SAC444L Equal Tee 28mm 2SAC555 2SAC555L Equal Tee 35mm 2SAC666 2SAC666L Equal Tee 42mm 2SAC777 2SAC777L Equal Tee 54mm 2SAC888 2SAC888L Equal Tee 76.1mm 2SAC999 2SAC999L Equal Tee 88.9mm 2SAC101010 2SAC101010L Equal Tee 108mm 2SAC211 2SAC211L Reduce Tee 18mmx15mmx15mm 2SAC212 2SAC212L Reduce Tee 18mmx15mmx18mm 2SAC312 2SAC312L Reduce Tee 22mmx15mmx18mm 2SAC313 2SAC313L Reduce Tee 22mmx15mmx22mm 2SAC322 2SAC322L Reduce Tee 22mmx18mmx18mm 2SAC323 2SAC323L Reduce Tee 22mmx18mmx22mm 2SAC414 2SAC414L Reduce Tee 28mmx15mmx28mm 2SAC424 2SAC424L Reduce Tee 28mmx18mmx28mm 2SAC433 2SAC433L Reduce Tee 28mmx22mmx22mm 2SAC434 2SAC434L Reduce Tee 28mmx22mmx28mm 2SAC515 2SAC515L Reduce Tee 35mmx15mmx35mm 2SAC525 2SAC525L Reduce Tee 35mmx18mmx35mm 2SAC534 2SAC534L Reduce Tee 35mmx22mmx28mm 2SAC535 2SAC535L Reduce Tee 35mmx22mmx35mm 2SAC543 2SAC543L Reduce Tee 35mmx28mmx22mm 2SAC544 2SAC544L Reduce Tee 35mmx28mmx28mm 2SAC545 2SAC545L Reduce Tee 35mmx28mmx35mm 2SAC616 2SAC616L Reduce Tee 42mmx15mmx42mm 2SAC626 2SAC626L Reduce Tee 42mmx18mmx42mm 2SAC635 2SAC635L Reduce Tee 42mmx22mmx35mm 2SAC636 2SAC636L Reduce Tee 42mmx22mmx42mm 2SAC645 2SAC645L Reduce Tee 42mmx28mmx35mm 2SAC646 2SAC646L Reduce Tee 42mmx28mmx42mm 2SAC656 2SAC656L Reduce Tee 42mmx35mmx42mm 2SAC717 2SAC717L Reduce Tee 54mmx15mmx54mm 2SAC727 2SAC727L Reduce Tee 54mmx18mmx54mm 2SAC737 2SAC737L Reduce Tee 54mmx22mmx54mm 2SAC747 2SAC747L Reduce Tee 54mmx28mmx54mm 2SAC757 2SAC757L Reduce Tee 54mmx35mmx54mm 2SAC767 2SAC767L Reduce Tee 54mmx42mmx54mm 2SAC838 2SAC838L Reduce Tee 76.1mmx76.1mmx22mm 2SAC848 2SAC848L Reduce Tee 76.1mmx76.1mmx28mm 2SAC858 2SAC858L Reduce Tee 76.1mmx76.1mmx35mm 2SAC868 2SAC868L Reduce Tee 76.1mmx76.1mmx42mm 2SAC878 2SAC878L Reduce Tee 76.1mmx76.1mmx54mm 2SAC939 2SAC939L Reduce Tee 88.9mmx88.9mmx22mm 2SAC949 2SAC949L Reduce Tee 88.9mmx88.9mmx28mm 2SAC959 2SAC959L Reduce Tee 88.9mmx88.9mmx35mm 2SAC969 2SAC969L Reduce Tee 88.9mmx88.9mmx42mm 2SAC979 2SAC979L Reduce Tee 88.9mmx88.9mmx54mm 2SAC989 2SAC989L Reduce Tee 88.9mmx88.9mmx76.1mm 2SAC10310 2SAC10310L Reduce Tee 108mmx108mmx22mm 2SAC10410 2SAC10410L Reduce Tee 108mmx108mmx28mm 2SAC10510 2SAC10510L Reduce Tee 108mmx108mmx35mm 2SAC10610 2SAC10610L Reduce Tee 108mmx108mmx42mm 2SAC10710 2SAC10710L Reduce Tee 108mmx108mmx54mm 2SAC10810 2SAC10810L Reduce Tee 108mmx108mmx76.1mm 2SAC10910 2SAC10910L Reduce Tee 108mmx108mmx88.9mm 2SAE011 2SAE011L Sliding coupling 15mm 2SAE022 2SAE022L Sliding coupling 18mm 2SAE033 2SAE033L Sliding coupling 22mm 2SAE044 2SAE044L Sliding coupling 28mm 2SAE055 2SAE055L Sliding coupling 35mm 2SAE066 2SAE066L Sliding coupling 42mm 2SAE077 2SAE077L Sliding coupling 54mm 2SAE088 2SAE088L Sliding coupling 76.1mm 2SAE099 2SAE099L Sliding coupling 88.9mm 2SAE1010 2SAE1010L Sliding coupling 108mm 2SAF012 2SAF012L Reducer adapter plain end 15mmx18mm 2SAF013 2SAF013L Reducer adapter plain end 15mmx22mm 2SAF014 2SAF014L Reducer adapter plain end 15mmx28mm 2SAF015 2SAF015L Reducer adapter plain end 15mmx35mm 2SAF016 2SAF016L Reducer adapter plain end 15mmx42mm 2SAF017 2SAF017L Reducer adapter plain end 15mmx54mm 2SAF023 2SAF023L Reducer adapter plain end 18mmx22mm 2SAF024 2SAF024L Reducer adapter plain end 18mmx28mm 2SAF025 2SAF025L Reducer adapter plain end 18mmx35mm 2SAF026 2SAF026L Reducer adapter plain end 18mmx42mm 2SAF027 2SAF027L Reducer adapter plain end 18mmx54mm 2SAF034 2SAF034L Reducer adapter plain end 22mmx28mm 2SAF035 2SAF035L Reducer adapter plain end 22mmx35mm 2SAF036 2SAF036L Reducer adapter plain end 22mmx42mm 2SAF037 2SAF037L Reducer adapter plain end 22mmx54mm 2SAF045 2SAF045L Reducer adapter plain end 28mmx35mm 2SAF046 2SAF046L Reducer adapter plain end 28mmx42mm 2SAF047 2SAF047L Reducer adapter plain end 28mmx54mm 2SAF056 2SAF056L Reducer adapter plain end 35mmx42mm 2SAF057 2SAF057L Reducer adapter plain end 35mmx54mm 2SAF067 2SAF067L Reducer adapter plain end 42mmx54mm 2SAF083 2SAF083 L Reducer adapter plain end 76,1mmx22mm 2SAF084 2SAF084L Reducer adapter plain end 76,1mmx28mm 2SAF085 2SAF085L Reducer adapter plain end 76,1mmx35mm 2SAF086 2SAF086L Reducer adapter plain end 76,1mmx42mm 2SAF087 2SAF087L Reducer adapter plain end 76,1mmx54mm 2SAF096 2SAF096L Reducer adapter plain end 88,9mmx42mm 2SAF097 2SAF097L Reducer adapter plain end 88,9mmx54mm 2SAF098 2SAF098L Reducer adapter plain end 88,9mmx76,1mm 2SAF1007 2SAF1007L Reducer adapter plain end 108mmx54mm 2SAF1008 2SAF1008L Reducer adapter plain end 108mmx76,1mm 2SAF1009 2SAF1009L Reducer adapter plain end 108mmx88,9mm 2SAG011 2SAG011L 45º elbow 15mm 2SAG022 2SAG022L 45º elbow 18mm 2SAG033 2SAG033L 45º elbow 22mm 2SAG044 2SAG044L 45º elbow 28mm 2SAG055 2SAG055L 45º elbow 35mm 2SAG066 2SAG066L 45º elbow 42mm 2SAG077 2SAG077L 45º elbow 54mm 2SAG088 2SAG088L 45º elbow 76.1mm 2SAG099 2SAG099L 45º elbow 88.9mm 2SAG1010 2SAG1010L 45º elbow 108mm 2SAH011 2SAH011L Street elbow with plain end 15mm 2SAH022 2SAH022L Street elbow with plain end 18mm 2SAH033 2SAH033L Street elbow with plain end 22mm 2SAH044 2SAH044L Street elbow with plain end 28mm 2SAH055 2SAH055L Street elbow with plain end 35mm 2SAH066 2SAH066L Street elbow with plain end 42mm 2SAH077 2SAH077L Street elbow with plain end 54mm 2SAH088 2SAH088L Street elbow with plain end 76.1mm 2SAH099 2SAH099L Street elbow with plain end 88.9mm 2SAH1010 2SAH1010L Street elbow with plain end 108mm 2SAI011 2SAI011L 45º Street elbow with plain end 15mm 2SAI022 2SAI022L 45º Street elbow with plain end 18mm 2SAI033 2SAI033L 45º Street elbow with plain end 22mm 2SAI044 2SAI044L 45º Street elbow with plain end 28mm 2SAI055 2SAI055L 45º Street elbow with plain end 35mm 2SAI066 2SAI066L 45º Street elbow with plain end 42mm 2SAI077 2SAI077L 45º Street elbow with plain end 54mm 2SAI088 2SAI088L 45º Street elbow with plain end 76.1mm 2SAI099 2SAI099L 45º Street elbow with plain end 88.9mm 2SAI1010 2SAI1010L 45º Street elbow with plain end 108mm 2SAJ111 2SAJ111L Male branch tee 15mmx1/2"Rx15mm 2SAJ212 2SAJ212L Male branch tee 18mmx1/2"Rx18mm 2SAJ323 2SAJ323L Male branch tee 22mmx3/4"Rx22mm 2SAJ434 2SAJ434L Male branch tee 28mmx1"Rx28mm 2SAJ545 2SAJ545L Male branch tee 35mmx1-1/4"Rx35mm 2SAK111 2SAK111L Female branch tee 15mmx1/2"Rpx15mm 2SAK212 2SAK212L Female branch tee 18mmx1/2"Rpx18mm 2SAK222 2SAK222L Female branch tee 18mmx3/4"Rpx18mm 2SAK313 2SAK313L Female branch tee 22mmx1/2"Rpx22mm 2SAK323 2SAK323L Female branch tee 22mmx3/4"Rpx22mm 2SAK414 2SAK414L Female branch tee 28mmx1/2"Rpx28mm 2SAK424 2SAK424L Female branch tee 28mmx3/4"Rpx28mm 2SAK434 2SAK434L Female branch tee 28mmx1"Rpx28mm 2SAK515 2SAK515L Female branch tee 35mmx1/2"Rpx35mm 2SAK525 2SAK525L Female branch tee 35mmx3/4"Rpx35mm 2SAK535 2SAK535L Female branch tee 35mmx1"Rpx35mm 2SAK545 2SAK545L Female branch tee 35mmx1 1/4"Rpx35mm 2SAK616 2SAK616L Female branch tee 42mmx1/2"Rpx42mm 2SAK626 2SAK626L Female branch tee 42mmx3/4"Rpx42mm 2SAK636 2SAK636L Female branch tee 42mmx1"Rpx42mm 2SAK646 2SAK646L Female branch tee 42mmx1 1/2"Rpx42mm 2SAK717 2SAK717L Female branch tee 54mmx1/2"Rpx54mm 2SAK727 2SAK727L Female branch tee 54mmx3/4"Rpx54mm 2SAK737 2SAK737L Female branch tee 54mmx1"Rpx54mm 2SAK777 2SAK777L Female branch tee 54mmx2"Rpx54mm 2SAK828 2SAK828L Female branch tee 76,1mmx3/4"Rpx76,1mm 2SAK878 2SAK878L Female branch tee 76,1mmx2"Rpx76.1mm 2SAK929 2SAK929L Female branch tee 88,9mmx3/4"Rpx88,9mm 2SAK979 2SAK979L Female branch tee 88,9mmx2"Rpx88,9mm 2SAK10210 2SAK10210L Female branch tee 108mmx3/4"Rpx108mm 2SAK10710 2SAK10710L Female branch tee 108mmx2"Rpx108mm 2SAL010 2SAL010L Straight male connector 15mmx3/8"R 2SAL011 2SAL011L Straight male connector 15mmx1/2"R 2SAL012 2SAL012L Straight male connector 15mmx3/4"R 2SAL021 2SAL021L Straight male connector 18mmx1/2"R 2SAL022 2SAL022L Straight male connector 18mmx3/4"R 2SAL031 2SAL031L Straight male connector 22mmx1/2"R 2SAL032 2SAL032L Straight male connector 22mmx3/4"R 2SAL033 2SAL033L Straight male connector 22mmx1"R 2SAL042 2SAL042L Straight male connector 28mmx3/4"R 2SAL043 2SAL043L Straight male connector 28mmx1"R 2SAL044 2SAL044L Straight male connector 28mmx1-1/4"R 2SAL053 2SAL053L Straight male connector 35mmx1"R 2SAL054 2SAL054L Straight male connector 35mmx1-1/4"R 2SAL055 2SAL055L Straight male connector 35mmx1-1/2"R 2SAL064 2SAL064L Straight male connector 42mmx1-1/4"R 2SAL065 2SAL065L Straight male connector 42mmx1-1/2"R 2SAL075 2SAL075L Straight male connector 54mmx1-1/2"R 2SAL077 2SAL077L Straight male connector 54mmx2"R 2SAL088 2SAL088L Straight male connector 76,1mmx2 1/2"R 2SAL099 2SAL099L Straight male connector 88,9mmx3"R 2SAL1010 2SAL1010L Straight male connector 108mmx4"R 2SAM010 2SAM010L Straight Female connector 15mmx3/8"Rp 2SAM011 2SAM011L Straight Female connector 15mmx1/2"Rp 2SAM012 2SAM012L Straight Female connector 15mmx3/4"Rp 2SAM021 2SAM021L Straight Female connector 18mmx1/2"Rp 2SAM022 2SAM022L Straight Female connector 18mmx3/4"Rp 2SAM031 2SAM031L Straight Female connector 22mmx1/2"Rp 2SAM032 2SAM032L Straight Female connector 22mmx3/4"Rp 2SAM033 2SAM033L Straight Female connector 22mmx1"Rp 2SAM042 2SAM042L Straight Female connector 28mmx3/4"Rp 2SAM043 2SAM043L Straight Female connector 28mmx1"Rp 2SAM044 2SAM044L Straight Female connector 28mmx1-1/4"Rp 2SAM053 2SAM053L Straight Female connector 35mmx1"Rp 2SAM054 2SAM054L Straight Female connector 35mmx1-1/4"Rp 2SAM055 2SAM055L Straight Female connector 35mmx1-1/2"Rp 2SAM064 2SAM064L Straight Female connector 42mmx1-1/4"Rp 2SAM065 2SAM065L Straight Female connector 42mmx1-1/2"Rp 2SAM075 2SAM075L Straight Female connector 54mmx1-1/2"Rp 2SAM077 2SAM077L Straight Female connector 54mmx2"Rp 2SAM088 2SAM088L Straight Female connector 76,1mmx2 1/2"Rp 2SAM099 2SAM099L Straight Female connector 88,9mmx3"Rp 2SAM1010 2SAM1010L Straight Female connector 108mmx4"Rp 2SAN011 2SAN011L Adapter with union nut 15mmx1/2"G 2SAN012 2SAN012L Adapter with union nut 15mmx3/4"G 2SAN022 2SAN022L Adapter with union nut 18mmx3/4"G 2SAN032 2SAN032L Adapter with union nut 22mmx3/4"G 2SAN033 2SAN033L Adapter with union nut 22mmx1"G 2SAN034 2SAN034L Adapter with union nut 22mmx1-1/4"G 2SAN035 2SAN035L Adapter with union nut 22mmx1-1/2"G 2SAN043 2SAN043L Adapter with union nut 28mmx1"G 2SAN044 2SAN044L Adapter with union nut 28mmx1-1/4"G 2SAN045 2SAN045L Adapter with union nut 28mmx1-1/2"G 2SAN054 2SAN054L Adapter with union nut 35mmx1 1/4"G 2SAN055 2SAN055L Adapter with union nut 35mmx1-1/2"G 2SAN065 2SAN065L Adapter with union nut 42mmx1 1/2"G 2SAN066 2SAN066L Adapter with union nut 42mmx1-3/4"G 2SAN076 2SAN076L Adapter with union nut 54mmx2"G 2SAN078 2SAN078L Adapter with union nut 54mmx2 3/8"G 2SAN088 2SAN088L Adapter with union nut 76.1mmx2 1/2"G 2SAO011 2SAO011L Adaptor union with male thread 15mmx1/2"R 2SAO012 2SAO012L Adaptor union with male thread 15mmx3/4"R 2SAO021 2SAO021L Adaptor union with male thread 18mmx1/2"R 2SAO022 2SAO022L Adaptor union with male thread 18mmx3/4"R 2SAO031 2SAO031L Adaptor union with male thread 22mmx1/2"R 2SAO032 2SAO032L Adaptor union with male thread 22mmx3/4"R 2SAO033 2SAO033L Adaptor union with male thread 22mmx1"R 2SAO043 2SAO043L Adaptor union with male thread 28mmx1"R 2SAO044 2SAO044L Adaptor union with male thread 28mmx1 1/4"R 2SAO054 2SAO054L Adaptor union with male thread 35mmx1-1/4"R 2SAO065 2SAO065L Adaptor union with male thread 42mmx1-1/2"R 2SAO077 2SAO077L Adaptor union with male thread 54mmx2"R 2SAP011 2SAP011L Adaptor union with female thread 15mmx1/2"Rp 2SAP012 2SAP012L Adaptor union with female thread 15mmx3/4"Rp 2SAP021 2SAP021L Adaptor union with female thread 18mmx1/2"Rp 2SAP022 2SAP022L Adaptor union with female thread 18mmx3/4"Rp 2SAP032 2SAP032L Adaptor union with female thread 22mmx3/4"Rp 2SAP033 2SAP033L Adaptor union with female thread 22mmx1"Rp 2SAP043 2SAP043L Adaptor union with female thread 28mmx1"Rp 2SAP044 2SAP044L Adaptor union with female thread 28mmx1 1/4"Rp 2SAP054 2SAP054L Adaptor union with female thread 35mmx1-1/4"Rp 2SAP065 2SAP065L Adaptor union with female thread 42mmx1-1/2"Rp 2SAP077 2SAP077L Adaptor union with female thread 54mmx2"Rp 2SAQ011 2SAQ011L Adaptors and connections detachable 15mm 2SAQ022 2SAQ022L Adaptors and connections detachable 18mm 2SAQ033 2SAQ033L Adaptors and connections detachable 22mm 2SAQ044 2SAQ044L Adaptors and connections detachable 28mm 2SAQ055 2SAQ055L Adaptors and connections detachable 35mm 2SAQ066 2SAQ066L Adaptors and connections detachable 42mm 2SAQ077 2SAQ077L Adaptors and connections detachable 54mm 2SAS011 2SAS011L 90° Swivel Connector 15mmx1/2"G 2SAS021 2SAS021L 90° Swivel Connector 18mmx1/2"G 2SAS032 2SAS032L 90° Swivel Connector 22mmx3/4"G 2SAS043 2SAS043L 90° Swivel Connector 28mmx1"G 2SAS054 2SAS054L 90° Swivel Connector 35mmx1 1/4"G 2SAS065 2SAS065L 90° Swivel Connector 42mmx1 1/2"G 2SAS077 2SAS077L 90° Swivel Connector 54mmx2"G 2SAV011 2SAV011L Male elbow 15mmx1/2"R 2SAV021 2SAV021L Male elbow 18mmx1/2"R 2SAV032 2SAV032L Male elbow 22mmx3/4"R 2SAV043 2SAV043L Male elbow 28mmx1"R 2SAV054 2SAV054L Male elbow 35mmx1-1/4"R 2SAV065 2SAV065L Male elbow 42mmx1-1/2"R 2SAV077 2SAV077L Male elbow 54mmx2"R 2SAW010 2SAW010L Female elbow 15mmx3/8"Rp 2SAW011 2SAW011L Female elbow 15mmx1/2"Rp 2SAW021 2SAW021L Female elbow 18mmx1/2"Rp 2SAW031 2SAW031L Female elbow 22mmx1/2"Rp 2SAW032 2SAW032L Female elbow 22mmx3/4"Rp 2SAW043 2SAW043L Female elbow 28mmx1"Rp 2SAW054 2SAW054L Female elbow 35mmx1-1/4"Rp 2SAX011 2SAX011L Flange PN 10/16, with pressing socket 15mm 2SAX022 2SAX022L Flange PN 10/16, with pressing socket 18mm 2SAX033 2SAX033L Flange PN 10/16, with pressing socket 22mm 2SAX044 2SAX044L Flange PN 10/16, with pressing socket 28mm 2SAX055 2SAX055L Flange PN 10/16, with pressing socket 35mm 2SAX066 2SAX066L Flange PN 10/16, with pressing socket 42mm 2SAX077 2SAX077L Flange PN 10/16, with pressing socket 54mm 2SAX088 2SAX088L Flange PN 10/16, with pressing socket 76.1mm 2SAX099 2SAX099L Flange PN 10/16, with pressing socket 88.9mm 2SAX1010 2SAX1010L Flange PN 10/16, with pressing socket 108mm 2SAY011 2SAY011L Cap 15mm 2SAY022 2SAY022L Cap 18mm 2SAY033 2SAY033L Cap 22mm 2SAY044 2SAY044L Cap 28mm 2SAY055 2SAY055L Cap 35mm 2SAY066 2SAY066L Cap 42mm 2SAY077 2SAY077L Cap 54mm 2SAY088 2SAY088L Cap 76.1mm 2SAY099 2SAY099L Cap 88.9mm 2SAY1010 2SAY1010L Cap 108mm 2SAZ011 2SAZ011L Elbow tap connector 90° 15mmx1/2"Rp 2SAZ022 2SAZ022L Elbow tap connector 90° 18mmx1/2"Rp 2SAZ032 2SAZ032L Elbow tap connector 90° 22mmx3/4"Rp 2SC1011 2SC1011L Adaptor union with female thread and plain end 15mm-1/2"Rp 2SC1021 2SC1021L Adaptor union with female thread and plain end 18mm-1/2"Rp 2SC1032 2SC1032L Adaptor union with female thread and plain end 22mm-3/4"Rp 2SC1043 2SC1043L Adaptor union with female thread and plain end 28mm-1"Rp 2SC1054 2SC1054L Adaptor union with female thread and plain end 35mmx1-1/4"Rp 2SC1065 2SC1065L Adaptor union with female thread and plain end 42mmx1-1/2"Rp 2SC1077 2SC1077L Adaptor union with female thread and plain end 54mmx2"Rp 2SC2031 2SC2031L Adaptor with female thread and plain end 22mmx1/2"Rp 2SC2041 2SC2041L Adaptor with female thread and plain end 28mmx1/2"Rp 2SC2051 2SC2051L Adaptor with female thread and plain end 35mmx1/2"Rp 2SC2061 2SC2061L Adaptor with female thread and plain end 42mmx1/2"Rp 2SC2071 2SC2071L Adaptor with female thread and plain end 54mmx1/2"Rp 2SC3011 2SC3011L Adaptor with female thread and plain end long 15mmx1/2"Rp 2SC3021 2SC3021L Adaptor with female thread and plain end long 18mmx1/2"Rp 2SC3022 2SC3022L Adaptor with female thread and plain end long 18mmx3/4"Rp 2SC3031 2SC3031L Adaptor with female thread and plain end long 22mmx1/2"Rp 2SC3032 2SC3032L Adaptor with female thread and plain end long 22mmx3/4"Rp 2SC4011 2SC4011L Adaptor with male thread and plain end 15mmx1/2"R 2SC4021 2SC4021L Adaptor with male thread and plain end 18mmx1/2"R 2SC4032 2SC4032L Adaptor with male thread and plain end 22mmx3/4"R 2SC4043 2SC4043L Adaptor with male thread and plain end 28mmx1"R 2SC4054 2SC4054L Adaptor with male thread and plain end 35mmx1-1/4"R 2SC4065 2SC4065L Adaptor with male thread and plain end 42mmx1-1/2"R 2SC4077 2SC4077L Adaptor with male thread and plain end 54mmx2"R 2SC5033 2SC5033L Flanged stub with plain end, for loose flange PN 10/16 22mm 2SC5044 2SC5044L Flanged stub with plain end, for loose flange PN 10/16 28mm 2SC5055 2SC5055L Flanged stub with plain end, for loose flange PN 10/16 35mm 2SC5066 2SC5066L Flanged stub with plain end, for loose flange PN 10/16 42mm 2SC5077 2SC5077L Flanged stub with plain end, for loose flange PN 10/16 54mm 2SC6011 2SC6011L Pipe bridge 15mm 2SC6022 2SC6022L Pipe bridge 18mm 2SC6033 2SC6033L Pipe bridge 22mm 2SC6044 2SC6044L Pipe bridge 28mm 2SCY011 2SCY011L Plug End 15mm 2SCY033 2SCY033L Plug End 22mm 2SCY044 2SCY044L Plug End 28mm 2SCY055 2SCY055L Plug End 35mm 2SCY066 2SCY066L Plug End 42mm 2SCY077 2SCY077L Plug End 54mm Note: "R" is 55 degree conical sealing pipe thread (male), "Rp" is 55 degree cylindrical sealed pipe thread (female). SS316L stainless steel models are for use with SS316L stainless steel pipe manufactured to EN 10312, with two sets of dimension of pipe: O.D. x wall thickness 1 O.D. x wall thickness 2 15mmx1mm 15mmx0.6mm 18mmx1mm 18mmx0.7mm 22mmx1.2mm 22mmx0.7mm 28mmx1.2mm 28mmx0.8mm 35mmx1.5mm 35mmx1.0mm 42mmx1.5mm 42mmx1.1mm 54mmx1.5mm 54mmx1.2mm 76.1mmx2mm 76.1mmx1.5mm 88.9mmx2mm 88.9mmx1.5mm 108mmx2mm 108mmx1.5mm SS304 stainless steel models are for use with SS304 stainless steel pipe manufactured to EN 10312, with two sets of dimension of pipe: O.D. x wall thickness 1 O.D. x wall thickness 2 15mmx1mm 15mmx0.6mm 18mmx1mm 18mmx0.7mm 22mmx1.2mm 22mmx0.7mm 28mmx1.2mm 28mmx0.8mm 35mmx1.5mm 35mmx1.0mm 42mmx1.5mm 42mmx1.1mm 54mmx1.5mm 54mmx1.2mm 76.1mmx2mm 76.1mmx1.5mm 88.9mmx2mm 88.9mmx1.5mm 108mmx2mm 108mmx1.5mm

Approval Holder:

Ningbo IDC International Trading Co. Ltd.

Company Name

Ningbo IDC International Trading Co. Ltd.

Address

Floor 43, Building A, International Trade Center, Ningbo Chamber of Commerce, No. 558 of Taikangzhong Road, Yinzhou District, Ningbo

Country

China

View All Listings by this Company

Range of WC dual flush drop valve comprising of a plastic body, silicone seating washer and an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2107159

Note:

Open outlet use only.

Size:

See models.

Marking:

Plumbright on the body. WRAS & Model code on body

Installation Requirements:

R001 R571

Expiry date:

31/07/2026

Model:

137004 PLUMBRIGHT: 1½” BSP (M),

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company