Directory Search Results

Print List

#2111315

Wall mounted, thermostatic shower valve (chromium plated brass). Flow is controlled by a quarter turn ceramic disc headwork with single lever operating member. Temperature is controlled independently by a thermostatic cartridge with a cross-top operating member that incorporates a manual override button. The product is supplied with a shower rail and overhead shower. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2111315
Size:
15mm compression
Marking:
PPI on rear of body PPI on overhead shower
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2026
Model:
803203BAR1
Product Images

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#2110901

Wall mounted bar type thermostatic shower valve, with a ceramic cartridge headwork controlling the flow between overhead shower and handset with a dome type operating member incorporating a manual override button. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a strainer and a single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. Supplied with hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2110901
Size:
½” BSP (M) x ¾” BSP (M) offset union adaptor
Marking:
Cacade on bar valve body
Installation Requirements:
R001 R040
Expiry date:
31/10/2026
Model:
024.1918.3
Product Images

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company
Manufacturer:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#2110368

Range of concealed, thermostatic shower blending valves, incorporating a brass body and a (chrome plated) functional trim set. The functional trim set comprises of a quarter turn ceramic disc headwork, or a 2 or 3 way ceramic disc diverter headwork (see model) with a dome type operating member controlling the flow, and a thermostatic cartridge controlling the temperature with a dome type operating member incorporating a manual override button. The functional trim set is also supplied with two brass assemblies comprising of a plastic filter, EPDM ‘O’-rings and an approved check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2110368
Note:
This approval does not include a shower hose and handset, or overhead shower outlet. The 38269 (concealed body) is not approved in its own right.
Size:
½” BSP (F)
Marking:
Gessi Emporio on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2026
Model:
38269 (concealed body) + 38792 (functional trim set - quarter turn), 38269 (concealed body) + 38794 (functional trim set - 2 way), 38269 (concealed body) + 38796 (functional trim set - 3 way).
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2104911

Thermostatic blending valve (chromium plated brass), the valve body inlets incorporate single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with stainless steel strainers and inlet connections that incorporate screw driver operated spherical valves. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2104911
Size:
22mm compression
Marking:
Bristan on indice cap
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2026
Model:
TS4753ECP

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company
Manufacturer:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#2112341

Range of T-Type thermostatic mixing valves incoporating a brass body and a thermostatic cartridge controlling the temperature. The 15mm & 22mm compression models are for use with copper pipe manufactured to EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2112341
Size:
see model
Marking:
Hydromix and LK logo (LK in a box) on body.
Installation Requirements:
R001 R010
Expiry date:
31/12/2026
Model:
LK 551 HYDROMIX: ½” BSP (F). LK 551 HYDROMIX: ¾” BSP (F). LK 551 HYDROMIX: ½” BSP (M). LK 551 HYDROMIX: ¾” BSP (M). LK 551 HYDROMIX: 1” BSP (M). LK 551 HYDROMIX: 15 mm compression. LK 551 HYDROMIX: 22 mm compression.
Product Images

Approval Holder:
LK Armatur
Company Name
LK Armatur
Address
Garnisonsgatan 49 SE-254 66 Helsingborg Sweden

View All Listings by this Company
Manufacturer:
LK Armatur
Company Name
LK Armatur
Address
Garnisonsgatan 49 SE-254 66 Helsingborg Sweden

View All Listings by this Company

Print This Approval


#2201807

Range of wafer and lugged type butterfly valves incorporating blue epoxy coated cast iron bodies, stainless steel discs and EPDM seat. The closing mechanism can be controlled by either a lever, gear or bore shaft. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
2201807
Size:
25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, 125mm, 150mm, 200mm, 250mm and 300mm
Marking:
VIP, Dn size, body material, disc material, Tmax, Pmax, on data plate. VIP & DN on body
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
00/0497 wafer pattern 00/0496 lugged pattern.

Approval Holder:
Valves Instruments Plus Ltd
Company Name
Valves Instruments Plus Ltd
Address
VIP House Chaddock Lane Astley Manchester
Postcode
M29 7JT
Country
United Kingdom
Phone
01942 885 700

View All Listings by this Company

Print This Approval


#2109023

Range of piston type float operated inlet valves with brass bodies. The valves discharge from a downwards atmospheric discharge arrangement on the underside of the body. Maximum working pressure: 3.0 (1FVA106 & 1FVA104 models only) or 14.0 Bar (all other models) Cold water use only.

Section:
2120 Valves
Section Subtitle:
Float operated, piston type, metal body.
WRAS Approval Number:
2109023
Note:
No float supplied.
Size:
Please refer to models.
Marking:
1FVA106, 1FVA012 & 1FVA014: BS1212/1 on body. IDC logo (E) on valve body. 1FVA004, 1FVA008 & 1FVA104: IDC logo (E) on valve body. Models added July 2022: IDC Logo "E", BS1212-1 and size on body - 1FVA006: ¾” BSP (M) Inlet Shank 2” or 4” IDC Logo "E" and size on body - 1FVA010: 1 ¼” (M)
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
1FVA004: 1/2” BSP (M) – Inlet Shank: 2” or 3” 1FVA106: 3/4" (M) - Inlet Shank: 2”, 3” or 4" 1FVA008: 1” BSP (M) 1FVA012: 1 ½” BSP (M) 1FVA014: 2” BSP (M) 1FVA104: 1/2” BSP (M) – Inlet Shank: 2” or 3” Models added July 2022: 1FVA006: ¾” BSP (M) Inlet Shank 2” or 4” 1FVA010: 1 ¼” (M)
Product Images

Approval Holder:
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Zhejiang, Taizhou City, Zhejiang Province, P. R.China
Country
China
General Email

View All Listings by this Company

Print This Approval


#2110062

Piston type float operated inlet valves with blue epoxy coated ductile iron bodies. The products are supplied with a plastic float and carbon steel (galvanised) lever. The valves discharges from a downwards atmospheric discharge arrangement on the underside of the body. Maximum working pressure 16.0 bar. Cold water use only.

Section:
2120 Valves
Section Subtitle:
Float operated, piston type, metal body.
WRAS Approval Number:
2110062
Size:
DN50 - DN300 flanged inlet/outlet.
Marking:
AVK, Glenfield, flow arrow & PN cast onto body. AVK and other technical info on adhesive label on body.
Installation Requirements:
R001
Expiry date:
31/10/2026
Model:
AVK ‘GLENFIELD’ BALL FLOAT VALVE SERIES 854: 854 XXX YY 1 ZZ 000 Where: XXX = DN size 050 - 300. YY = 00 - all copper parts CC491K ZZ = 00 - plastic float and carbon steel (galvanised) lever.
Product Images

Approval Holder:
AVK Polska Sp. z o.o.
Company Name
AVK Polska Sp. z o.o.
Address
Jakubowska 1 Pniewy
Postcode
62-045
Country
Poland
General Email
avkpolska@avkpolska.pl

View All Listings by this Company
Manufacturer:
AVK Polska Sp. z o.o.
Company Name
AVK Polska Sp. z o.o.
Address
Jakubowska 1 Pniewy
Postcode
62-045
Country
Poland
General Email
avkpolska@avkpolska.pl

View All Listings by this Company

Print This Approval


#2109021

Deck mounted flow control valve incorporating a brass body, quarter turn ceramic disc headwork with circular operating members and EDPM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
2109021
Size:
½” BSP (M) inlet and outlet
Marking:
Dornbracht on sliding ring.
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
20000811 Deck valve
Product Images

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2112061

Range of deck mounted, flow control valves (brass bodies), incorporating a quarter turn ceramic disc headwork with either a cross top or single lever operating member (see models). The products are supplied with a metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
2112061
Size:
½” BSP (M)
Marking:
Dornbracht on edge of baseplate
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
20000882 – Single lever 20000883 – Single lever 20000892 – Cross-top
Product Images

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 140 of 787

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.