IDC ‘BDGxxx’ range of press fittings with brass or nickel plated brass bodies (see model) incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). The BDG241 and BDG257 prefix models incorporate an EPDM gasket on the captive nut end connection. Pressfit jointing is achieved by either a U or TH crimping profile. Compression connections are for use with copper pipe 12-28mm (manufactured to EN1057) or Irish copper pipe 14.7-27.4mm (manufactured to EN1057). For above ground use only. Maximum working pressure 10.0 bar. 20, 25 & 26mm pressfit sizes cold water use only. Threaded, compression and 16 & 32mm pressfit sizes maximum operating temperature 95°C. From June 2025: The 20, 25 & 26mm pressfit sizes (TH profile only) maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404712

Size:

Pressfit: 16, 20, 25, 26 & 32mm. Compression: 12mm, 14.7mm, 15mm, 18mm, 21mm, 22mm, 27.4mm & 28mm. Threaded: ⅜”, ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (U or TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Models include a suffix to denote profile and whether brass or nickel plated. -U = brass with U profile. -TH = brass with TH profile. -P-U = nickel plated brass with U profile. -P-TH = nickel plated with TH profile. BDG245 - Straight PEX x PEX (press x press): BDG2450101: 16mm x 16mm, BDG2450301: 20mm x 20mm, BDG2450401: 25mm x 25mm, BDG2450501: 26mm x 26mm, BDG2450601: 32mm x 32mm. BDG244 - Reduce Straight PEX x PEX (press x press): BDG2440101: 20mm x 16mm, BDG2440201: 25mm x 16mm, BDG2440301: 26mm x 16mm, BDG2440601: 25mm x 20mm, BDG2440701: 26mm x 20mm, BDG2440800: 32mm x 16mm, BDG2440702: 32mm x 20mm, BDG2440802: 32mm x 26mm. BDG242 - Straight PEX x Male (press x male): BDG2420101: 16mm x 3/8"M, BDG2420201: 16mm x 1/2"M, BDG2420202: 16mm x 3/4"M, BDG2420501: 20mm x 1/2"M, BDG2420601: 20mm x 3/4"M, BDG2420602: 20mm x 1"M, BDG2420701: 25mm x 3/4"M, BDG2420702: 25mm x 1"M, BDG2420802: 26mm x 1/2"M, BDG2420803: 26mm x 3/4"M, BDG2420804: 26mm x 1"M, BDG2420900: 32mm x 3/4"M, BDG2420901: 32mm x 1"M. BDG243 - Straight PEX x Female (press x female): BDG2430100: 16mm x 3/8"F, BDG2430101: 16mm x 1/2"F, BDG2430102: 16mm x 3/4"F, BDG2430301: 20mm x 1/2"F, BDG2430401: 20mm x 3/4"F, BDG2430402: 20mm x 1"F, BDG2430501: 25mm x 3/4"F, BDG2430601: 25mm x 1"F, BDG2430701: 26mm x 3/4"F, BDG2430801: 26mm x 1"F, BDG2430901: 32mm x 1"F. BDG246 - Stop end (press): BDG246001: 16mm, BDG246003: 20mm, BDG246004: 25mm, BDG246005: 26mm, BDG246006: 32mm. BDG253 - Straight Compression x PEX (compression x press): BDG2530400: 12mmC x 16mm, BDG2530401: 15mmC x 16mm, BDG2530403: 15mmC x 20mm, BDG2530503: 18mmC x 20mm, BDG2530504: 18mmC x 25mm, BDG2530603: 22mmC x 20mm, BDG2530803: 28mmC x 20mm, BDG2530804: 28mmC x 25mm, BDG2530805: 28mmC x 26mm, BDG2530806: 28mmC x 32mm, BDG2531401: 1/2"C x 16mm, BDG2531603: 3/4"C x 20mm, BDG2531605: 3/4"C x 26mm, BDG2531805: 1"C x 26mm, BDG2531806: 1"C x 32mm. BDG241 - Tap connector PEX x Swivel Female (press x captive nut female): BDG2410101: 16 x 3/8"F, BDG2410201: 16 x 1/2"F, BDG2410202: 16 x 3/4"F, BDG2410501: 20 x 1/2"F, BDG2410601: 20 x 3/4"F, BDG2410701: 25 x 3/4"F, BDG2410801: 25 x 1"F, BDG2410803: 26 x 3/4"F, BDG2410804: 26 x 1"F, BDG2410901: 32 x 1"F. BDG249 - Elbow (press): BDG2490101: 16mm, BDG2490201: 20mm, BDG2490301: 25mm, BDG2490401: 26mm, BDG2490501: 32mm. BDG449 - Elbow 45° (press): BDG4490301: 25mm, BDG4490401: 26mm, BDG4490501: 32mm. BDG256 - Elbow PEX x Male (press x male): BDG2560103: 16mm x 3/8"M, BDG2560104: 16mm x 1/2"M, BDG2560106: 16mm x 3/4"M, BDG2560304: 20mm x 1/2"M, BDG2560306: 20mm x 3/4"M, BDG2560308: 20mm x 1"M, BDG2560406: 25mm x 3/4"M, BDG2560408: 25mm x 1"M, BDG2560506: 26mm x 3/4"M, BDG2560508: 26mm x 1"M, BDG2560608: 32mm x 1"M. BDG247 - Elbow PEX x Female (press x female): BDG2470100: 16mm x 3/8"F, BDG2470101: 16mm x 1/2"F, BDG2470102: 16mm x 3/4"F, BDG2470301: 20mm x 1/2"F, BDG2470302: 20mm x 3/4"F, BDG2470303: 20mm x 1"F, BDG2470401: 25mm x 3/4”F, BDG2470402: 25mm x 1”F, BDG2470501: 26mm x 3/4"F, BDG2470502: 26mm x 1"F, BDG2470600: 32mm x 3/4"F, BDG2470601: 32mm x 1"F. BDG248 - Wall Plate PEX x Female (press x female): BDG2480101: 16 x 1/2"F, BDG2480301: 20 x 1/2"F, BDG2480401: 20 x 3/4"F, BDG2480402: 25x 3/4"F, BDG2480403: 25 x 1"F, BDG2480501: 26 x 3/4"F, BDG2480502: 26 x 1"F. BDG257 - Elbow Tap connector PEX x Swivel Female (press x captive nut female): BDG2570103: 16 x 3/8"F, BDG2570104: 16 x 1/2"F, BDG2570106: 16 x 3/4"F, BDG2570304: 20 x 1/2"F, BDG2570306: 20 x 3/4"F, BDG2570401: 25 x 3/4"F, BDG2570402: 25 x 1"F, BDG2570506: 26 x 3/4"F, BDG2570508: 26 x 1"F, BDG2570608: 32 x 1"F. BDG255 - Equal Tee (press): BDG2550101: 16mm, BDG2550301: 20mm, BDG2550401: 25mm, BDG2550501: 26mm, BDG2550601: 32mm. BDG254 - Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): BDG2540101: 16 x 20 x 16, BDG2541001: 20 x 16 x 16, BDG2541101: 20 x 16 x 20, BDG2541201: 20 x 20 x 16, BDG2541202: 20 x 26 x 16, BDG2541402: 20 x 26 x 20, BDG2541403: 20 x 32 x 32, BDG2541501: 25 x 16 x 16, BDG2541601: 25 x 16 x 20, BDG2541701: 25 x 16 x 25, BDG2541801: 25 x 20 x 16, BDG2541901: 25 x 20 x 20, BDG2542001: 25 x 20 x 25, BDG2542101: 25 x 25 x 20, BDG2541300: 26 x 16 x 16, BDG2542300: 26 x 16 x 20, BDG2542500: 26 x 20 x 16, BDG2542301: 26 x 16 x 26, BDG2542401: 26 x 20 x 20, BDG2542501: 26 x 20 x 26, BDG2542502: 26 x 26 x 16, BDG2542503: 26 x 26 x 20, BDG2542800: 32 x 20 x 26, BDG2542602: 32 x 32 x 26, BDG2542504: 26 x 32 x 26, BDG2542802: 32 x 32 x 20, BDG2542803: 32 x 16 x 32, BDG2542801: 32 x 20 x 32, BDG2542601: 32 x 26 x 26, BDG2542701: 32 x 26 x 32. BDG250 - Reduce Tee PEX(Left) x PEX(Right) x Male(Middle) (press x male x press): BDG2500101: 16 x 1/2"M x 16, BDG2500301: 20 x 1/2"M x 20, BDG2500302: 20 x 3/4"M x 20, BDG2500401: 25 x 3/4"M x 25, BDG2500402: 25 x 1"M x 25, BDG2500500: 26 x 1/2"M x 26, BDG2500501: 26 x 3/4"M x 26, BDG2500502: 26 x 1"M x 26, BDG2500600: 32 x 1/2"M x 32, BDG2500601: 32 x 3/4"M x 32, BDG2500701: 32 x 1"M x 32. BDG251 - Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): BDG2510101: 16 x 1/2"F x 16, BDG2510301: 20 x 1/2"F x 20, BDG2510302: 20 x 3/4"F x 20, BDG2510303: 26 x 1/2"F x 26, BDG2510304: 26 x 3/4"F x 20, BDG2510306: 26 x 3/4"F x 26, BDG2510308: 26 x 1"F x 26, BDG2510401: 25x3/4"F x 25, BDG2510402: 25x1"F x 25, BDG2510500: 32 x 1/2"F x 32, BDG2510501: 32 x 3/4"F x 32, BDG2510502: 32 x 1"F x 32.

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC FLUID CONTROL CO., LTD.

Company Name

IDC FLUID CONTROL CO., LTD.

Address

Mechanical & Electrical Industrial Zone Yuhuan City Zhejiang Province

Country

China

General Email

View All Listings by this Company

Range of M profile brass press fittings with EPDM ‘O’-rings or gaskets to be used with copper pipe manufactured to EN1057 for above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240604008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Hailiang & size on body

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

EKYA00103 MALE CONNECTOR CXM - 15mmxR 1/2 EKYA00157 MALE CONNECTOR CXM - 15mmxR 3/4 EKYA00115 MALE CONNECTOR CXM - 22mmxR 1/2 EKYA00104 MALE CONNECTOR CXM - 22mmxR 3/4 EKYA00116 MALE CONNECTOR CXM - 22mmxR 1 EKYA00117 MALE CONNECTOR CXM - 28mmxR 3/4 EKYA00105 MALE CONNECTOR CXM - 28mmxR 1 EKYA00118 MALE CONNECTOR CXM - 35mmxR 1 EKYA00106 MALE CONNECTOR CXM - 35mmxR 1 1/4 EKYA00107 MALE CONNECTOR CXM - 42mmxR 1 1/2 EKYA00108 MALE CONNECTOR CXM - 54mmxR 2 EKYA00109 MALE CONNECTOR CXM - 66.7mmxR 2 1/2 EKYA00110 MALE CONNECTOR CXM - 76.1mmxR 2 1/2 EKYA00111 MALE CONNECTOR CXM - 76.1mmxR 3 EKYA00303 FEMALE CONNECTOR CXF - 15mmxRp 1/2 EKYA00357 FEMALE CONNECTOR CXF - 15mmxRp 3/4 EKYA00315 FEMALE CONNECTOR CXF - 22mmxRp 1/2 EKYA00304 FEMALE CONNECTOR CXF - 22mmxRp 3/4 EKYA00316 FEMALE CONNECTOR CXF - 22mmxRp 1 EKYA00317 FEMALE CONNECTOR CXF - 28mmxRp 3/4 EKYA00305 FEMALE CONNECTOR CXF - 28mmxRp 1 EKYA00318 FEMALE CONNECTOR CXF - 35mmxRp 1 EKYA00306 FEMALE CONNECTOR CXF - 35mmxRp 1 1/4 EKYA00307 FEMALE CONNECTOR CXF - 42mmxRp 1 1/2 EKYA00308 FEMALE CONNECTOR CXF - 54mmxRp 2 EKYA00309 FEMALE CONNECTOR CXF - 66.7mmxRp 2 1/2 EKYA00310 FEMALE CONNECTOR CXF - 76.1mmxRp 2 1/2 EKYA00311 FEMALE CONNECTOR CXF - 76.1mmxRp 3 EKYA10103 MALE ELBOW CXM - 15mmxR 1/2 EKYA10104 MALE ELBOW CXM - 22mmxR 3/4 EKYA10105 MALE ELBOW CXM - 28mmxR 1 EKYA10106 MALE ELBOW CXM - 35mmxR 1 1/4 EKYA10107 MALE ELBOW CXM - 42mmxR 1 1/2 EKYA10108 MALE ELBOW CXM - 54mmxR 2 EKYA10303 FEMALE ELBOW CXF - 15mmxRp 1/2 EKYA10304 FEMALE ELBOW CXF - 22mmxRp 3/4 EKYA10305 FEMALE ELBOW CXF - 28mmxRp 1 EKYA10306 FEMALE ELBOW CXF - 35mmxRp 1 1/4 EKYA10307 FEMALE ELBOW CXF - 42mmxRp 1 1/2 EKYA10308 FEMALE ELBOW CXF - 54mmxRp 2 EKYA10803 WALLPLATE ELBOW - 15mmxRp 1/2 EKYA10804 WALLPLATE ELBOW - 22mmxRp ¾ EKYA01003 UNION COUPLING CXC - 15mm EKYA01004 UNION COUPLING CXC - 22mm EKYA01005 UNION COUPLING CXC - 28mm EKYA01006 UNION COUPLING CXC - 35mm EKYA01007 UNION COUPLING CXC - 42mm EKYA01008 UNION COUPLING CXC - 54mm EKYA20303 FEMALE TEE CXCXF - 15mmx15mmxRp 1/2 EKYA20315 FEMALE TEE CXCXF - 22mmx22mmxRp 1/2 EKYA20304 FEMALE TEE CXCXF - 22mmx22mmxRp 3/4 EKYA20316 FEMALE TEE CXCXF - 28mmx28mmxRp 1/2 EKYA20317 FEMALE TEE CXCXF - 28mmx28mmxRp 3/4 EKYA20305 FEMALE TEE CXCXF - 28mmx28mmxRp 1 EKYA20318 FEMALE TEE CXCXF - 35mmx35mmxRp 1/2 EKYA20319 FEMALE TEE CXCXF - 35mmx35mmxRp 3/4 EKYA20320 FEMALE TEE CXCXF - 35mmx35mmxRp 1 EKYA20306 FEMALE TEE CXCXF - 35mmx35mmxRp 1 1/4 EKYA20321 FEMALE TEE CXCXF - 42mmx42mmxRp 1/2 EKYA20322 FEMALE TEE CXCXF - 42mmx42mmxRp 3/4 EKYA20323 FEMALE TEE CXCXF - 42mmx42mmxRp 1 EKYA20307 FEMALE TEE CXCXF - 42mmx42mmxRp 1 1/2 EKYA20324 FEMALE TEE CXCXF - 54mmx54mmxRp 1/2 EKYA20325 FEMALE TEE CXCXF - 54mmx54mmxRp 1 EKYA20308 FEMALE TEE CXCXF - 54mmx54mmxRp 2 EKYA01303 STRAIGHT SWIVEL CONNECTOR CXF - 15mmxG 1/2 EKYA01357 STRAIGHT SWIVEL CONNECTOR CXF - 15mmxG 3/4 EKYA01304 STRAIGHT SWIVEL CONNECTOR CXF - 22mmxG 3/4 EKYA01315 STRAIGHT SWIVEL CONNECTOR CXF - 22mmxG 1 EKYA01316 STRAIGHT SWIVEL CONNECTOR CXF - 28mmxG 1 1/4 EKYA01317 STRAIGHT SWIVEL CONNECTOR CXF - 35mmxG 1 1/2 EKYA01318 STRAIGHT SWIVEL CONNECTOR CXF - 42mmxG 2 EKYA01203 STRAIGHT MALE UNION CXM - 15mmxR 1/2 EKYA01257 STRAIGHT MALE UNION CXM - 15mmxR 3/4 EKYA01215 STRAIGHT MALE UNION CXM - 22mmxR 1/2 EKYA01204 STRAIGHT MALE UNION CXM - 22mmxR 3/4 EKYA01216 STRAIGHT MALE UNION CXM - 22mmxR 1 EKYA01217 STRAIGHT MALE UNION CXM - 28mmxR 3/4 EKYA01205 STRAIGHT MALE UNION CXM - 28mmxR 1 EKYA01206 STRAIGHT MALE UNION CXM - 35mmxR 1 1/4 EKYA01207 STRAIGHT MALE UNION CXM - 42mmxR 1 1/2 EKYA01208 STRAIGHT MALE UNION CXM - 54mmxR 2 EKYA01103 STRAIGHT FEMALE UNION CXF - 15mmxRp 1/2 EKYA01157 STRAIGHT FEMALE UNION CXF - 15mmxRp 3/4 EKYA01115 STRAIGHT FEMALE UNION CXF - 22mmxRp 1/2 EKYA01104 STRAIGHT FEMALE UNION CXF - 22mmxRp 3/4 EKYA01116 STRAIGHT FEMALE UNION CXF - 22mmxRp 1 EKYA01117 STRAIGHT FEMALE UNION CXF - 28mmxRp 3/4 EKYA01105 STRAIGHT FEMALE UNION CXF - 28mmxRp 1 EKYA01106 STRAIGHT FEMALE UNION CXF - 35mmxRp 1 1/4 EKYA01107 STRAIGHT FEMALE UNION CXF - 42mmxRp 1 1/2 EKYA01108 STRAIGHT FEMALE UNION CXF - 54mmxRp 2

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

SANHA Press Series 6000 & 16000 and PURAPRESS Series 8000 of press-fit fittings with copper (6000), bronze (8000) and chrome plated copper (16000) bodies and EPDM `O`-rings. For use with copper pipe manufactured in accordance with BS EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240602058

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Sizes are in mm Pressfit

Marking:

Sanha logo, Size and CuSi on body

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

SANHA Press Series 6000: SANHA-Press Bend 90° M/F: 16001A12: 12. 16001A14: 14. 16001A15: 15. 16001A16: 16. 16001A18: 18. 16001A22: 22. 16001A28: 28. 16001A35: 35. 16001A76: 76,1. 16001A89: 88,9. 16001A108: 108,0. 16001L15: 15. SANHA-Press Bend 90° F/F: 16002A12: 12. 16002A14: 14. 16002A15: 15. 16002A16: 16. 16002A18: 18. 16002A22: 22. 16002A28: 28. 16002A76: 76,1. 16002A89: 88,9. 16002A108: 108,0. SANHA-Press Bend 45° M/F: 1604012: 12. 1604014: 14. 1604015: 15. 1604016: 16. 1604018: 18. 1604022: 22. 1604028: 28. 1604076: 76,1. 1604089: 88,9. 16040108: 108,0. SANHA-Press Bend 45° F/F: 1604112: 12. 1604114: 14. 1604115: 15. 1604116: 16. 1604118: 18. 1604122: 22. 1604128: 28. 1604176: 76,1. 1604189: 88,9. 16041108: 108,0. SANHA-Press Full Crossover: 1608512: 12. 1608514: 14. 1608515: 15. 1608516: 16. 1608518: 18. 1608522: 22. 1608528: 28. SANHA-Press Partial crossover: 1608612: 12. 1608614: 14. 1608615: 15. 1608616: 16. 1608618: 18. 1608622: 22. 1608628: 28. SANHA-Press Tee: 1613012: 12. 1613014: 14. 1613015: 15. 1613016: 16. 1613018: 18. 1613022: 22. 1613028: 28. 1613076: 76,1. 1613089: 88,9. 16130108: 108,0. SANHA-Press Tee: 16130121512: 12x15x12. 16130141214: 14x12x14. 16130151212: 15x12x12. 16130151215: 15x12x15. 16130151512: 15x15x12. 16130151815: 15x18x15. 16130152215: 15x22x15. 16130161216: 16x12x16. 16130161414: 16x14x14. 16130161416: 16x14x16. 16130181215: 18x12x15. 16130181218: 18x12x18. 16130181418: 18x14x18. 16130181515: 18x15x15. 16130181518: 18x15x18. 16130181618: 18x16x18. 16130181815: 18x18x15. 16130182218: 18x22x18. 16130221222: 22x12x22. 16130221422: 22x14x22. 16130221515: 22x15x15. 16130221518: 22x15x18. 16130221522: 22x15x22. 16130221622: 22x16x22. 16130221815: 22x18x15. 16130221818: 22x18x18. 16130221822: 22x18x22. 16130222215: 22x22x15. 16130222218: 22x22x18. 16130222822: 22x28x22. 16130281428: 28x14x28. 16130281522: 28x15x22. 16130281528: 28x15x28. 16130281628: 28x16x28. 16130281822: 28x18x22. 16130281828: 28x18x28. 16130282222: 28x22x22. 16130282228: 28x22x28. 16130282815: 28x28x15. 16130282818: 28x28x18. 16130282822: 28x28x22. 16130283528: 28x35x28. 16130762276: 76,1x22x76,1. 16130762876: 76,1x28x76,1. 16130897689: 88,9x76,1x88,9. 1613010876108: 108,0x76,1x108,0. 1613010889108: 108,0x88,9x108,0. 16130L15: 15. SANHA-Press Reducing coupling: 162401412: 14x12. 162401512: 15x12. 162401514: 15x14. 162401614: 16x14. 162401812: 18x12. 162401814: 18x14. 162401815: 18x15. 162401816: 18x16. 162402214: 22x14. 162402215: 22x15. 162402216: 22x16. 162402218: 22x18. 162402815: 28x15. 162402818: 28x18. 162402822: 28x22. SANHA-Press Reducer: 162431412: 14ax12. 162431512: 15ax12. 162431612: 16ax12. 162431614: 16ax14. 162431812: 18ax12. 162431814: 18ax14. 162431815: 18ax15. 162431816: 18ax16. 162432214: 22ax14. 162432215: 22ax15. 162432216: 22ax16. 162432218: 22ax18. 162432815: 28ax15. 162432816: 28ax16. 162432818: 28ax18. 162432822: 28ax22. 162438976: 88,9ax76,1. 1624310876: 108,0ax76,1. 1624310889: 108,0ax88,9. SANHA-Press Coupling: 1627012: 12. 1627014: 14. 1627015: 15. 1627016: 16. 1627018: 18. 1627022: 22. 1627028: 28. 1627076: 76,1. 1627089: 88,9. 16270108: 108,0. SANHA-Press End Cap: 1630112: 12. 1630114: 14. 1630115: 15. 1630116: 16. 1630118: 18. 1630122: 22. 1630128: 28. 1630176: 76,1. 1630189: 88,9. 16301108: 108,0. SANHA-Press Slip coupling: 16270S12: 12. 16270S15: 15. 16270S18: 18. 16270S22: 22. 16270S28: 28. 16270S76: 76,1. 16270S89: 88,9. 16270S108: 108,0. SANHA-Press Coupling: 1627012: 12. 1627014: 14. 1627015: 15. 1627016: 16. 1627018: 18. 1627022: 22. 1627028: 28. 1627076: 76,1. 1627089: 88,9. 16270108: 108,0 Models added September 2024 PuraPress series 6000: SANHA-Press Bend 90° M/F: 16001A35: 35. 16001A42: 42. 16001A54: 54. 16001A64: 64. 16001A67: 67. SANHA-Press Bend 90° F/F: 16002A35: 35. 16002A42: 42. 16002A54: 54. 16002A64: 64. 16002A67: 67. SANHA-Press Bend 45° M/F: 1604035: 35. 1604042: 42. 1604054: 54. 1604064: 64. 1604067: 67. SANHA-Press Bend 45° F/F: 1604135: 35. 1604142: 42. 1604154: 54. 1604164: 64. 1604167: 67. SANHA-Press Tee: 1613035: 35. 1613042: 42. 1613054: 54. 1613064: 64. 1613067: 67. SANHA-Press Tee: 16130351535: 35x15x35. 16130351835: 35x18x35. 16130352222: 35x22x22. 16130352228: 35x22x28. 16130352235: 35x22x35. 16130352828: 35x28x28. 16130352835: 35x28x35. 16130353522: 35x35x22. 16130353528: 35x35x28. 16130421542: 42x15x42. 16130422242: 42x22x42. 16130422842: 42x28x42. 16130423535: 42x35x35. 16130423542: 42x35x42. 16130542254: 54x22x54. 16130542854: 54x28x54. 16130543554: 54x35x54. 16130544254: 54x42x54. 16130644264: 64x42x64. 16130645464: 64x54x64. 16130672867: 67x28x67. 16130673567: 67x35x67. 16130674267: 67x42x67. 16130675467: 67x54x67. 16130763576: 76,1x35x76,1. 16130764276: 76,1x42x76,1. 16130765476: 76,1x54x76,1. 16130766476: 76,1x64x76,1. 16130766776: 76,1x67x76,1. 16130895489: 88,9x54x88,9. 16130896489: 88,9x64x88,9. 1613010854108: 108,0x54x108,0. 1613010864108: 108,0x64x108,0. 1613010867108: 108,0x67x108,0. SANHA-Press Reducing coupling: 162403522: 35x22. 162403528: 35x28. 162404222: 42x22. 162404228: 42x28. 162404235: 42x35. 162405428: 54x28. 162405435: 54x35. 162405442: 54x42. SANHA-Press Reducer: 162433522: 35ax22. 162433528: 35ax28. 162434222: 42ax22. 162434228: 42ax28. 162434235: 42ax35. 162435435: 54ax35. 162435442: 54ax42. 162436442: 64ax42. 162436454: 64ax54. 162436728: 67ax28. 162436735: 67ax35. 162436742: 67ax42. 162436754: 67ax54. 162437635: 76,1ax35. 162437642: 76,1ax42. 162437654: 76,1ax54. 162437667: 76,1ax67. 162438954: 88,9ax54. 162438964: 88,9ax64. 1624310842: 108,0ax42. 1624310854: 108,0ax54. 1624310864: 108,0ax64. 1624310867: 108,0ax67. SANHA-Press Coupling: 1627035: 35. 1627042: 42. 1627054: 54. 1627064: 64. 1627067: 67. SANHA-Press Slip coupling: 16270S35: 35. 16270S42: 42. 16270S54: 54. 16270S64: 64. 16270S67: 67. SANHA-Press End Cap: 1630135: 35. 1630142: 42. 1630154: 54. 1630164: 64. 1630167: 67. SANHA-Press Crimping flange PN 10/16: 1BMPF42: DN 40 / 42 mm. 1BMPF54: DN 50 / 54 mm. 1BMPF67: DN -- / 66,7 mm. 1BMPF76: DN 65 / 76,1 mm. 1BMPF76_DN80: DN 80 / 76,1 mm. 1BMPF89: DN 80 / 88,9 mm. PuraPress series 8000: PURAPRESS Female elbow 90°: 18090221: 22x1. 18090281: 28x1. 1809035114: 35x11/4. 1809042112: 42x11/2. 18090542: 54x2. PURAPRESS Male elbow 90°: 18092221: 22x1. 18092281: 28x1. 1809235114: 35x11/4. 1809242112: 42x11/2. 18092542: 54x2. PURAPRESS Union elbow, flat sealing: 18096221: 22x1. 18096281: 28x1 1809635114: 35x11/4. 1809642112: 42x11/2. 18096542: 54x2. PURAPRESS Tee, female: 181303512: 35x1/2x35. 18130351: 35x1x35. 181304212: 42x1/2x42. 181305412: 54x1/2x54. PURAPRESS Male adaptor: 18243221: 22x1. 18243281: 28x1. 1824328114: 28x11/4. 18243351: 35x1. - 1824335114: 35x11/4. - 1824335112: 35x11/2. - 1824342114: 42x11/4. - 1824342112: 42x11/2. - 1824354112: 54x11/2. - 18243542: 54x2. - 1824364212: 64x21/2. - 1824367212: 67x21/2. - 1824376212: 76,1x21/2. -> PURAPRESS Plug-in adaptor, female: 18246281: 28ax1. 1824635114: 35ax11/4. 1824642112: 42ax11/2. 18246542: 54ax2. PURAPRESS Flow Check Coupling with 2 holes: 18270FC26712: 67x1/2. PURAPRESS Female adaptor: 18270221: 22x1. 18270281: 28x1. 1827028114: 28x11/4. 18270351: 35x1. 1827035114: 35x11/4. 1827035112: 35x11/2. 1827042114: 42x11/4. 1827042112: 42x11/2. 1827054112: 54x11/2. 18270542: 54x2. 1827064212: 64x21/2. 1827067212: 67x21/2. 1827076212: 76,1x21/2. PURAPRESS Plug-in adaptor, male: 18280221: 22ax1. 18280281: 28ax1. 1828035114: 35ax11/4. 1828042112: 42ax11/2. 18280542: 54ax2. PURAPRESS Union, flat sealing: 1833035: 35. 1833042: 42. 1833054: 54. THREADED PURAPRESS Union, female, flat seal.: 18330221: 22x1. 18330281: 28x1. 1833035114: 35x11/4. 1833042112: 42x11/2. 18330542: 54x2. PURAPRESS Union, male, flat sealing: 18333221: 22x1. 18333281: 28x1. 1833335114: 35x11/4. 1833342112: 42x11/2. 18333542: 54x2. PURAPRESS Union adaptor, flat seal.: 18359151: 15x1. 18359181: 18x1. 18359221: 22x1. 1835922114: 22x11/4. 1835922112: 22x11/2. 18359281: 28x1. 1835928114: 28x11/4. 1835928112: 28x11/2. 1835935112: 35x11/2. 18359352: 35x2. 1835942134: 42x13/4. 18359422: 42x2. 1835954238: 54x23/8. 18359763: 76,1x3. 1835989312: 88,9x31/2. PURAPRESS Flange PN10/16: 1PURAPF35: DN 32 / 35 mm. 1PURAPF42: DN 40 / 42 mm. 1PURAPF54: DN 50 / 54 mm. 1PURAPF64: DN -- / 64 mm. 1PURAPF67: DN -- / 67 mm. PuraPress series 16000: SANHA-Press Chrome Male adaptor: 116243G1212: 12x1/2. 116243G1512: 15x1/2. 116243G1812: 18x1/2. 116243G1834: 18x3/4. 116243G2212: 22x1/2. 116243G2234: 22x3/4. 116243G221: 22x1. 116243G2834: 28x3/4. 116243G281: 28x1 116243G28114: 28x11/4. SANHA-Press Chrome Female adaptor: 116270G1212: 12x1/2. 116270G1512: 15x1/2. 116270G1812: 18x1/2. 116270G1834: 18x3/4. 116270G2212: 22x1/2. 116270G2234: 22x3/4 116270G221: 22x1. 116270G2834: 28x3/4. 116270G281: 28x1. 116270G28114: 28x11/4. SANHA-Press Chrome Plug-in adaptor, male: 116280G1212: 12ax1/2. 116280G1512: 15ax1/2. 116280G1812: 18ax1/2. 116280G1834: 18ax3/4. 116280G2212: 22ax1/2. 116280G2234: 22ax3/4. 116280G2834: 28ax3/4. 116280G281: 28ax1. SANHA-Press Chrome Union adaptor, flat seal.: 116359G1212: 12x1/2. 116359G1534: 15x3/4. 116359G181: 18x1.

PuraPress series 8000: PURAPRESS Female elbow 90°: 180901238: 12x3/8. 180901212: 12x1/2. 180901412: 14x1/2. 180901538: 15x3/8. 180901512: 15x1/2. 180901534: 15x3/4. 180901612: 16x1/2. 180901812: 18x1/2. 180901834: 18x3/4. 180902212: 22x1/2. 180902234: 22x3/4. 180902812: 28x1/2. 180902834: 28x3/4. PURAPRESS Male elbow 90°: 180921238: 12x3/8. 180921212: 12x1/2. 180921412: 14x1/2. 180921538: 15x3/8. 180921512: 15x1/2. 180921612: 16x1/2. 180921812: 18x1/2. 180921834: 18x3/4. 180922212: 22x1/2. 180922234: 22x3/4. PURAPRESS Union elbow, flat sealing: 180961212: 12x1/2. 180961512: 15x1/2. 180961812: 18x1/2. 180961834: 18x3/4. 180962234: 22x3/4. PURAPRESS Tee, female: 181301212: 12x1/2x12. 181301412: 14x1/2x14. 181301538: 15x3/8x15. 181301512: 15x1/2x15. 181301612: 16x1/2x16. 181301812: 18x1/2x18. 181302212: 22x1/2x22. 181302234: 22x3/4x22. 181302812: 28x1/2x28. 181302834: 28x3/4x28. PURAPRESS Male adaptor: 182431238: 12x3/8. 182431212: 12x1/2. 182431438: 14x3/8. 182431412: 14x1/2. 182431538: 15x3/8. 182431512: 15x1/2. 182431534: 15x3/4. 182431612: 16x1/2. 182431634: 16x3/4. 182431812: 18x1/2. 182431834: 18x3/4. 182432212: 22x1/2. 182432234: 22x3/4. 182432834: 28x3/4. 18243763: 76,1x3. 18243893: 88,9x3. 182431084: 108,0x4. PURAPRESS Plug-in adaptor, female: 182461212: 12ax1/2. 182461538: 15ax3/8. 182461512: 15ax1/2. 182461812: 18ax1/2. 182461834: 18ax3/4. 182462212: 22ax1/2. 182462234: 22ax3/4. 182462834: 28ax3/4. PURAPRESS Flow Check Coupling with 2 holes: 18270FC27612: 76,1x1/2. 18270FC38934: 88,9x3/4. 18270FC410834: 108,0x3/4. PURAPRESS Female adaptor: 182701238: 12x3/8. 182701212: 12x1/2. 182701438: 14x3/8. 182701412: 14x1/2. 182701538: 15x3/8. 182701512: 15x1/2. 182701534: 15x3/4. 182701612: 16x1/2. 182701634: 16x3/4. 182701812: 18x1/2. 182701834: 18x3/4. 182702212: 22x1/2. 182702234: 22x3/4. 182702834: 28x3/4. 18270893: 88,9x3. PURAPRESS Plug-in adaptor, male: 182801212: 12ax1/2. 182801538: 15ax3/8. 182801512: 15ax1/2. 182801812: 18ax1/2. 182801834: 18ax3/4. 182802212: 22ax1/2. 182802234: 22ax3/4. 182802834: 28ax3/4. PURAPRESS Union, flat sealing: 1833015: 15. 1833018: 18. 1833022: 22. 1833028: 28. PURAPRESS Union, female, flat seal.: 183301512: 15x1/2. 183301534: 15x3/4. 183301812: 18x1/2. 183301834: 18x3/4. 183302234: 22x3/4. 183302834: 28x3/4. PURAPRESS Union, male, flat sealing: 183331238: 12x3/8. 183331212: 12x1/2. 183331512: 15x1/2. 183331534: 15x3/4. 183331812: 18x1/2. 183331834: 18x3/4. 183332212: 22x1/2. 183332234: 22x3/4. 183332834: 28x3/4. PURAPRESS Union adaptor, flat seal.: 183591212: 12x1/2. 183591234: 12x3/4. 183591438: 14x3/8. 183591412: 14x1/2. 183591538: 15x3/8. 183591512: 15x1/2. 183591534: 15x3/4. 183591634: 16x3/4. 183591834: 18x3/4. 183592234: 22x3/4. PURAPRESS Wall Plate, female end and female thread: 184721212: 12x1/2. 184721412: 14x1/2. 184721512: 15x1/2. 184721612: 16x1/2. 184721812: 18x1/2. 184721834: 18x3/4. 184722212: 22x1/2. 184722234: 22x3/4. PURAPRESS Wall plate with universal flange, with female end and female thread: 184731512: 15x1/2. 184732234: 22x3/4. PURAPRESS Double wall plate, both sides female end and female thread: 18478GZ151215: 15x1/2x15. 18478GZ151216: 15x1/2x16. 18478GZ151218: 15x1/2x18. 18478GZ151222: 15x1/2x22. 18478GZ161216: 16x1/2x16. 18478GZ161218: 16x1/2x18. 18478GZ161222: 16x1/2x22. 18478GZ181215: 18x1/2x15. 18478GZ181218: 18x1/2x18. 18478GZ181222: 18x1/2x22. 18478GZ221215: 22x1/2x15. 18478GZ221218: 22x1/2x18. 18478GZ221222: 22x1/2x22. PURAPRESS Mounting unit, female solder ends and female threads: 189761512: 15x1/2. PURAPRESS Installation set for fastening wall plates: 18980G1512: 15x1/2. 18980G1812: 18x1/2. 18980G2212: 22x1/2. PURAPRESS Installation set for fastening double wall plates: 18981G151215: 15x1/2x15. 18981G151218: 15x1/2x18. 18981G151222: 15x1/2x22. 18981G181215: 18x1/2x15. 18981G181218: 18x1/2x18. 18981G181222: 18x1/2x22. 18981G221215: 22x1/2x15. 18981G221218: 22x1/2x18. 18981G221222: 22x1/2x22. PURAPRESS Flange PN10/16: 1PURAPF28: DN 25 / 28 mm. 1PURAPF76: DN 65 / 76,1 mm. 1PURAPF76_DN80: DN 80 / 76,1 mm. 1PURAPF89: DN 80 / 88,9 mm. 1PURAPF108: DN 100 / 108,0 mm. SANHA Press Series 16000: SANHA-Press Chrom Bend 90° M/F: 116001A12: 12. 116001A15: 15. 116001A18: 18. 116001A22: 22. 116001A28: 28. SANHA-Press Chrom Bend 90° F/F: 116002A12: 12. 116002A15: 15. 116002A18: 18. 116002A22: 22. 116002A28: 28. SANHA-Press Chrom Bend 45° M/F: 11604012: 12. 11604015: 15. 11604018: 18. 11604022: 22. 11604028: 28. SANHA-Press Chrom Bend 45° F/F: 11604112: 12. 11604115: 15. 11604118: 18. 11604122: 22. 11604128: 28. SANHA-Press Chrom Full Crossover: 11608512: 12. 11608515: 15. 11608518: 18. 11608522: 22. 11608528: 28. SANHA-Press Chrom Partial crossover: 11608612: 12. 11608615: 15. 11608618: 18. 11608622: 22. 11608628: 28. SANHA-Press Chrom Tee: 11613012: 12. 11613015: 15. 11613018: 18. 11613022: 22. 11613028: 28. 116130121512: 12x15x12. 116130151212: 15x12x12. 116130151215: 15x12x15. 116130151512: 15x15x12. 116130181218: 18x12x18. 116130181515: 18x15x15. 116130181518: 18x15x18. 116130181815: 18x18x15. 116130182218: 18x22x18. 116130221222: 22x12x22. 116130221515: 22x15x15. 116130221522: 22x15x22. 116130221818: 22x18x18. 116130221822: 22x18x22. 116130222215: 22x22x15. 116130222218: 22x22x18. 116130222822: 22x28x22. 116130281522: 28x15x22. 116130281528: 28x15x28. 116130282222: 28x22x22. 116130282228: 28x22x28. 116130282815: 28x28x15. 116130282822: 28x28x22. SANHA-Press Chrom Reducing coupling: 1162401512: 15x12. 1162401812: 18x12. 1162401815: 18x15. 1162402215: 22x15. 1162402218: 22x18. 1162402815: 28x15. 1162402822: 28x22. SANHA-Press Chrom Reducer: 1162431512: 15ax12. 1162431812: 18ax12. 1162431815: 18ax15. 1162432215: 22ax15. 1162432218: 22ax18. 1162432815: 28ax15. 1162432822: 28ax22. SANHA-Press Chrom Male adaptor: 116243G1238: 12x3/8. 116243G1538: 15x3/8. SANHA-Press Chrom Coupling: 11627012: 12. 11627015: 15. 11627018: 18. 11627022: 22. 11627028: 28. SANHA-Press Chrom Female adaptor: 116270G1238: 12x3/8. 116270G1538: 15x3/8. SANHA-Press Chrom Slip coupling: 116270S12: 12. 116270S15: 15. 116270S18: 18. 116270S22: 22. 116270S28: 28. SANHA-Press Chrom Plug-in adaptor, male: 116280G1538: 15ax3/8.

Approval Holder:

SANHA GmbH & Co. KG

Company Name

SANHA GmbH & Co. KG

Address

Im Teelbruch 80 Essen

Postcode

45219

Country

Germany

Phone

+32499361070

General Email

nicolas.verspecht@sanha.com

View All Listings by this Company

Manufacturer:

SANHA GmbH & Co. KG

Company Name

SANHA GmbH & Co. KG

Address

Im Teelbruch 80 Essen

Postcode

45219

Country

Germany

Phone

+32499361070

General Email

nicolas.verspecht@sanha.com

View All Listings by this Company

Range of blue epoxy coated ductile iron dismantling fittings with EPDM sealing rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

240602033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 to DN1200 Flanged

Marking:

FAMAT, Sapag-valves.com, model and technical information on data plate on body

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

DJ1 Dismantling Joint

Approval Holder:

SAPAG VALVES

Company Name

SAPAG VALVES

Address

2 rue du Marais HAM

Postcode

80400

Country

France

Phone

+33 (0)3 23 81 42 87

General Email

eric.vincent@sapag-valves.com

View All Listings by this Company

‘Helvatron H2O’ range of ultrasonic water meters with brass bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Helvatron on cap. Helvatron and product info on meter face. Size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

Helvatron H2O range: H2O DN15 (port lengths 115 & 165mm): ¾” BSP (M) inlet/outlet, H2O DN20 (port lengths 130, 190 & 195mm): 1” BSP (M) inlet/outlet, H2O DN25 (port lengths 225 & 260mm): 1¼” BSP (M) inlet/outlet, H2O DN32 (port lengths 230 & 260mm): 1½” BSP (M) inlet/outlet, H2O DN40 (port lengths 245 & 300mm): 2” BSP (M) inlet/outlet.

Approval Holder:

Helvatron AG

Company Name

Helvatron AG

Address

JOCHLERWEG 2 CH-6340 BAAR SWITZERLAND

View All Listings by this Company

Range of submersible pressure sensors and hydrostatic transmitters (supplied in lengths up to 1000m). Cold water use only.

Section:

1530 Miscellaneous Fittings

Size:

Ø22mm or 32mm (see model).

Marking:

VEGA, VEGAWELL 52, model number and other product information on label connected to cable.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

VEGAWELL 52 WL52.XX α A β γ I δ ε ζ X Where: XX :- Approval Blank/without (not applicable to model seeking WRAS approval). α :- Fastening / Material X4 :- Without GE :- Adjustable screw connection for suspension cable G¾ PN3, ISO228-1 / 316L. GC :- Adjustable screw connection for suspension cable G1 PN3, ISO228-1 / 316L. GD :- Adjustable screw connection for suspension cable 1NPT PN3, ASME B1.20.1 / 316L. GA :- Adjustable screw connection for suspension cable G1½ PN3, ISO228-1 / 316L. GB :- Adjustable screw connection for suspension cable 1½NPT PN3, ASME B1.20.1 / 316L. Version / Process temperature A :- Suspension cable PE / -20...+60°C β :- Length of suspension cable K :- 6m PE suspension cable. L :- 12m PE suspension cable. M :- 27m PE suspension cable. T :- Individually selected length PE suspension cable. γ :- Transmitter material / Diameter V :- 316l / 22mm. D :- Duplex (1.4462) / 32mm. Sealing concept / Wetted seal I :- Double / EPDM (A+P 70.10-02), EPDM (70.503-00) δ :- Measuring rate A :- rel. / 0 … +0.1 bar (0 … + 10kPa). B :- rel. / 0 … +0.2 bar (0 … + 20kPa). C :- rel. / 0 … +0.4 bar (0 … + 40kPa). D :- rel. / 0 … +1.0 bar (0 … + 100kPa). E :- rel. / 0 … +2.5 bar (0 … + 250kPa). F :- rel. / 0 … +5.0 bar (0 … + 500kPa). G :- rel. / 0 … +10 bar (0 … + 1,000kPa). H :- rel. / 0 … +25 bar (0 … + 2,500kPa). ε :- Electronics C :- Two-wire 4…20mA. D :- Two-wire 4…20mA/HART + Four-wire PT100. ζ :- Accuracy class 1 :- 0.2%, 2 :- 0.1%. Transmitter option X :- without.

Approval Holder:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

Country

Germany

General Email

info.de@vega.com

View All Listings by this Company

‘Monsoon Standard’ range of single and twin ended shower booster pumps with brass bodies, brass impellers, EPDM seals and NBR ‘O’-rings. The inlet(s) of the pump body incorporate(s) a plastic strainer. Models with push fit connections include an integral isolation valve. Pushfit connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240504702

Note:

R007 & R009 applies to the 21mm & 22mm pushfit inlet/outlet hoses.

Size:

44428 - Monsoon S1.5 bar Twin EXIP model: ¾” BSP (M) (inlet/outlet). ROI suffix models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 21mm push-fit end connections (inlet/outlet). EXP suffix models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections (inlet/outlet). All other models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating 22mm push-fit end connections (inlet/outlet).

Marking:

Stuart Turner, model no., serial no, part no., pressure rating, Monsoon, manufacturer’s address and other technical information on adhesive label on body.

Installation Requirements:

R001 R007 R009 R415

Expiry date:

31/05/2029

Model:

46420: Monsoon S4.5 bar Single, 46419: Monsoon S3.0 bar Single, 46418: Monsoon S4.5 bar Twin, 46417: Monsoon S4.0 bar Twin, 46416: Monsoon S3.0 bar Twin, 46415: Monsoon S2.0 bar Twin, 46506: Monsoon S1.5 bar Twin, 44754: Monsoon S1.5 bar Twin, 46497: Monsoon S2.0 bar Single, 44424: Monsoon S1.5 bar Twin, 44423: Monsoon S2.0 bar Twin, 44422: Monsoon S2.0 bar Single, 44428: Monsoon S1.5 bar Twin EXIP, 46420ROI: Monsoon S4.5 bar Single, 46419ROI: Monsoon S3.0 bar Single, 46418ROI: Monsoon S4.5 bar Twin, 46417ROI: Monsoon S4.0 bar Twin, 46416ROI: Monsoon S3.0 bar Twin, 46415ROI: Monsoon S2.0 bar Twin, 46506ROI: Monsoon S1.5 bar Twin, 46497ROI: Monsoon S2.0 bar Single, 46420EXP: Monsoon S4.5 bar Single, 46419EXP: Monsoon S3.0 bar Single, 46418EXP: Monsoon S4.5 bar Twin, 46417EXP: Monsoon S4.0 bar Twin, 46416EXP: Monsoon S3.0 bar Twin, 46415EXP: Monsoon S2.0 bar Twin, 46506EXP: Monsoon S1.5 bar Twin, 46497EXP: Monsoon S2.0 bar Single.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of horizontal or vertical multi-stage pumps with a stainless-steel body (HM models) or cast iron body with blue coloured cationic resin coating (VM models), incorporating either plastic or stainless-steel impellers (see model), stainless steel sleeve, EPDM gaskets and seals. Maximum working pressure 10.0 bar / 16.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240206701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

HM models: 1” - 2” BSP (F) VM models: 1¼” - 1½” BSP (F).

Marking:

Lowara or Goulds Water Technology (both brands of Xylem), manufacturer and address, model number, serial number, maximum working pressure and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

28/02/2029

Model:

1HM, 3HM, 5HM, 10HM, 15HM & 22HM. 1VM, 3VM, 5VM & 10VM. Model nomenclature: W XXX YY Z EM Where: W - flow rate (m3/h), either 1, 3, 5, 10, 15, or 22. XXX - Model type: Horizontal (HM) or Vertical (VM) mode, where last (optional) digit can denote the variable speed drive as follows: Null = standard asynchronous motor, H = equipped with Hydrovar, X = other drives, E = e-SM. YY - Number of impellers/stages HM models: 2-25 stages only (02-25), VM models: 2-8 stages only (02-08). Z - Material, where: (P) is plastic impeller and SS AISI 304 body (HM & VM models), (S) is SS AISI 304 impeller and body (HM models only), (N) is SS AISI 316 impeller and body (HM models only). E = 5 - 6 digits for electrical specification. M = 3 digits, where: 1st digit: Mech. rotary seal - V = Aluminium oxide (Ceramic), or Mech. rotary seal - Q = Silicon carbide (Ceramic). 2nd digit: Mech. stationary seal - B = Carbon resin impregnated. 3rd digit: Mech. seal elastomers - E = EPDM. Example code: 1HM03P05M5HVBE. Max Working Pressure for VM models → 10 bar. Max Working Pressure for HM models with stainless steel impellers and QBE Mechanical Seal → 16 bar (Depending on number of stages - see below), Max Working Pressure for HM models with plastic impellers and/or VBE Mechanical Seal → 10 bar (Depending on number of stages - see below). 1HM (P)/(S)/(N) 1-16 stages - 10.0 bar, 1HM (S)/(N) 18-25 stages - 16.0 bar. 3HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 3HM (S)/(N) 14-21 stages - 16.0 bar. 5HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 5HM (S)/(N) 14-21 stages - 16.0 bar. 10HM (P)/(S)/(N) 1-8 stages - 10.0 bar, 10HM (S)/(N) 9-13 stages - 16.0 bar. 15HM (S)/(N) 2-7 stages - 10.0 bar, 22HM (S)/(N) 2-5 stages - 10.0 bar.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Manufacturer:

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Company Name

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Address

View All Listings by this Company

Range of shower outlets, (brass bodies - various finishes), incorporating ball joints, EPDM ‘O’-rings and NBR rubber seals. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240504019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F) ½” BSP (F) ¾” BSP (M) ½” BSP (M

Marking:

THG etched on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2029

Model:

186PR/W,286/W,288L/W,290/B/W,290/J/W,290/M/W,910PR/W & 3640/W Finishes: A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD H58 – Brushed stainless steel color PVD H59 – Stainless steel color PVD H60 – Matt blush PVD H62 – Blush PVD H63 – Dark Nickel H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Range of wall or ceiling mounted shower outlets with plastic bodies (various finishes) and brass shower arms (various finishes, incorporating EPDM O-rings and plastic flow regulators. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240608001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Products with ceiling connectors are to be installed with 24 010 180 basic set. 24 010 180 basic set is not approved in it's own right.

Size:

See models Products with ceiling connectors are to be installed with 24 010 180 basic set

Marking:

Hansgrohe on shower plates (Models 24 003, 24 013, 24 002 & 24 012). AXOR on shower plate (Models 35 274, 35 278 & 35 277).

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

24 002 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower with ceiling connector 24 002 600 - Hansgrohe | Rainmaker Select 460 1jet overhead shower with ceiling connector 24 003 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower - 1/2" BSP (M) 24 003 600 - Hansgrohe | Rainmaker Select 460 1jet overhead shower - 1/2" BSP (M) 24 012 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min with ceiling connector 24 013 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min - 1/2" BSP (M) 35 274 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet - 1/2" BSP (M) 35 277 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet with ceiling connector 35 278 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet - 1/2" BSP (M) 24 010 180 - Hansgrohe | Rainmaker Select Basic Set - 1/2" BSP (F)

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company