Directory Search Results

Print List

#250102704

Range of unvented storage cylinders. The secondary circuit is fitted with a temperature and pressure relief valve set at 7.0 bar at 90˚C and an expansion relief valve set at 6.0 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also Supplied with an expansion vessel and tundish. Maximum working pressures: Primary circuit: 5.5 bar Secondary circuit: 6.0 bar Solar circuit:6.0 bar Maximum operating temperature 85.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm compression all connections
Marking:
Joule, model name, capacity, pressure ratings and other technical information on adhesive label on cylinder
Installation Requirements:
R001 R140 R360
Expiry date:
31/01/2030
Model:
TRSMVD-0090LFC TRSMVD-0120LFB TRSMVD-0150LFB TRSMVD-0180LFB TRSMVD-0210LFC TRSMVD-0250LFC TRSMVD-0300LFC TRSMVI-0090LFC TRSMVI-0120LFB TRSMVI-0150LFB TRSMVI-0180LFB TRSMVI-0210LFC TRSMVI-0250LFC TRSMVI-0300LFC TRSMVS-0150LFB TRSMVS-0180LFB TRSMVS-0210LFC TRSMVS-0250LFC TRSMVS-0300LFC

Manufacturer:
Joule Hot Water Systems UK Ltd
Company Name
Joule Hot Water Systems UK Ltd
Address
Unit 3, Leftfield Park, Park Road Pontefract, West Yorkshire WF8 4PS

View All Listings by this Company

Print This Approval


#250104704

Range of 2, 3, 4, 5, 6 and 7 port manifold assemblies with brass bodies incorporating spherical valves with lever type operating members. The port compression connections are for use with copper pipe to EN1057. Maximum working pressure 16.0 Bar. Maximum operating temperature 95.0°C

Section:
1950 Manifolds
Section Subtitle:
Metal.
WRAS Approval Number:
250104704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (F), ¾” BSP (M), 1” BSP (F), 1” BSP (M) with ½” (14.7mm) compression ports.
Marking:
Sanbra S logo on body, Irish Instantor, size and ISEN1254-2 cast on compression nut.
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
771892PW - Brass Manifold ¾” x ½” 2 PORT, 771894PW - Brass Manifold ¾” x ½” 3 PORT, 771895PW - Brass Manifold ¾” x ½” 4 PORT, 771885PW - Brass Manifold ¾” x ½” 5 PORT, 771886PW - Brass Manifold ¾” x ½” 6 PORT, 771884PW - Brass Manifold ¾” x ½” 7 PORT, 771893PW - Brass Manifold 1” x ½” 2 PORT.

Approval Holder:
Sanbra Fyffe Ltd.
Company Name
Sanbra Fyffe Ltd.
Address
Instantor Works Santry Avenue Dublin
Postcode
D09 K160
Country
Ireland
Phone
+353(0)1 842 6255
General Email
Ryan.Charleson@Instantor.ie

View All Listings by this Company

Print This Approval


#2301105

Range of air release valves with blue epoxy coated ductile iron bodies and EPDM seats. Maximum working pressure 16.0 bar

Non-metallic materials and components comply with BS6920 at 80°C

Section:
1980 Valves
Section Subtitle:
Air venting valve(s) Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2301105
Size:
DN50, DN80, DN100, DN150, DN200, DN300 flanged.
Marking:
Company Logo, DN, PN and other technical on metal dataplate on body Date of manufacture YYYY, DI, DN & PN on body
Installation Requirements:
R001 R120
Expiry date:
31/01/2028
Model:
11-SC3F

Approval Holder:
CTV Armaturen & Penstocks GmBH
Company Name
CTV Armaturen & Penstocks GmBH
Address
Pliniusstrasse 6, 48488 Emsbueren
Country
Germany
General Email
gerhard.jj@ctv-valves.com

View All Listings by this Company

Print This Approval


#250102044

Range of air venting valves with blue epoxy coated ductile iron bodies and stainless steel float. Maximum working pressure: 16.0Bar Maximum operating temperature: 60°c

Section:
1980 Valves
Section Subtitle:
Air venting valve(s) Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
250102044
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN80 – DN200
Marking:
Amicon Logo, Size, Pressure and cast number on body
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
AR10FX

Approval Holder:
Saudi Amicon Co, Ltd
Company Name
Saudi Amicon Co, Ltd
Address
Eastern Province Dammam 31471 PO Box 3430

View All Listings by this Company

Print This Approval


#250102018

Concealed, wall mounted, manual shower blending valve incorporating a brass body (various finishes) with ceramic cartridge headwork with a single lever operating member. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 60 °C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
250102018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
Grohe logo on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2030
Model:
24.334.xx1 32.742.xx1 29.078.xx1 where xx1 denotes finish, can be replaced by: 001 – Chrome DC1 – Supersteel DA1 – Warm sunset AL1 – Brushed hard graphite GL1 – cool sunrise

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1268 of 1772

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.