Self-closing combination tap assembly (chromium plated brass) with a spring-loaded headwork controlling both temperature and flow with a dome type operating member. The spout outlet incorporates a plastic flow straightener. The flexible hose inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

240604001

Size:

Stainless steel or polyamide braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Inta on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2029

Model:

NC230CP

Product Images

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Manufacturer:

Idral S.p.A.

Company Name

Idral S.p.A.

Address

Via Isei, 8/10 - I-28010 Gargallo (NO)

Country

Italy

Phone

+39 0322 912017

General Email

View All Listings by this Company

Range of nylon braided (DG50X model series) or stainless steel braided (DG10X model series), PEX lined flexible hose assemblies with a variety of end connections (see models for full breakdown), including EPDM washers and ‘O’-rings where applicable. Some models are supplied with screwdriver operated isolation valves (see model list). All compression and push-fit fittings are to be used with copper pipe (manufactured to EN 1057). Maximum working pressure: 16 bar. Maximum operating temperature: 85°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240402029

Size:

See models below. Note: Comp = compression, PF = push-fit

Marking:

Fanski, WRAS and year of manufacture (YYYY) on ferrule

Installation Requirements:

R001 R008

Expiry date:

30/04/2029

Model:

DG50X-WRAS-200-L - 15mm comp x M10 short, DN8 DG10X-WRAS-400-L - 15mm comp x M10 short, DN8 DG50X-WRAS-201-L - 15mm comp x M12 short, DN8 DG10X-WRAS-401-L - 15mm comp x M12 short, DN8 DG50X-WRAS-202-L - ⅜” BSP (F) x 10mm comp, DN10 DG10X-WRAS-402-L - ⅜” BSP (F) x 10mm comp, DN10 DG50X-WRAS-203-L - ½” BSP (F) elbow x 15mm comp, DN10 DG10X-WRAS-403-L - ½” BSP (F) elbow x 15mm comp, DN10 DG50X-WRAS-204-L - ½” BSP (F) x ½” BSP (F), DN10 DG10X-WRAS-404-L - ½” BSP (F) x ½” BSP (F), DN10 DG50X-WRAS-205-L - ½” BSP (F) x 15mm comp iso valve, DN10 DG10X-WRAS-405-L - ½” BSP (F) x 15mm comp iso valve, DN10 DG50X-WRAS-206-L - 15mm PF x 15mm PF iso valve, DN10 DG10X-WRAS-406-L - 15mm PF x 15mm PF iso valve, DN10 DG50X-WRAS-207-L - ¾” BSP (F) x 22mm comp iso valve, DN13 DG10X-WRAS-407-L - ¾” BSP (F) x 22mm comp iso valve, DN13 DG50X-WRAS-208-L - ¾” BSP (F) x 22mm comp, DN13 DG10X-WRAS-408-L - ¾” BSP (F) x 22mm comp, DN13 DG50X-WRAS-209-L - 22mm PF x 22mm PF iso valve, DN13 DG10X-WRAS-409-L - 22mm PF x 22mm PF iso valve, DN13 DG50X-WRAS-210-L - ⅜” BSP (F) x 15mm comp, DN10 DG10X-WRAS-410-L - ⅜” BSP (F) x 15mm comp, DN10 DG50X-WRAS-211-L - ½” BSP (F) x 15mm comp, DN10 DG10X-WRAS-411-L - ½” BSP (F) x 15mm comp, DN10 DG50X-WRAS-212-L - 10mm comp x 15mm comp, DN10 DG10X-WRAS-412-L - 10mm comp x 15mm comp, DN10 DG50X-WRAS-213-L - 15mm comp x 15mm comp, DN10 DG10X-WRAS-413-L - 15mm comp x 15mm comp, DN10 DG50X-WRAS-214-L - ¾” BSP (F) x 15mm comp, DN10 DG10X-WRAS-414-L - ¾” BSP (F) x 15mm comp, DN10 DG50X-WRAS-215-L - 15mm comp x 22mm comp, DN10 DG10X-WRAS-415-L - 15mm comp x 22mm comp, DN10 DG50X-WRAS-216-L - ½” BSP (F) x 22mm comp, DN10 DG10X-WRAS-416-L - ½” BSP (F) x 22mm comp, DN10 DG50X-WRAS-217-L - ¾” BSP (F) x 15mm comp iso valve, DN10 DG10X-WRAS-417-L - ¾” BSP (F) x 15mm comp iso valve, DN10 DG50X-WRAS-218-L - 15mm PF x M10x1 short, DN10 DG10X-WRAS-418-L - 15mm PF x M10x1 short, DN10 DG50X-WRAS-219-L - 15mm PF x M12x1 short, DN10 DG10X-WRAS-419-L - 15mm PF x M12x1 short, DN10 DG50X-WRAS-220-L - ¾” BSP (F) x 15mm PF, DN10 DG10X-WRAS-420-L - ¾” BSP (F) x 15mm PF, DN10 DG50X-WRAS-221-L - 15mm PF x ½” BSP (F) elbow, DN10 DG10X-WRAS-421-L - 15mm PF x ½” BSP (F) elbow, DN10 DG50X-WRAS-222-L - 15mm comp x 15mm PF, DN10 DG10X-WRAS-422-L - 15mm comp x 15mm PF, DN10 DG50X-WRAS-223-L - 15mm PF x 15mm PF, DN10 DG10X-WRAS-423-L - 15mm PF x 15mm PF, DN10 DG50X-WRAS-224-L - ¾” BSP (F) x ¾” BSP (F), DN13 DG10X-WRAS-424-L - ¾” BSP (F) x ¾” BSP (F), DN13 DG50X-WRAS-225-L - 22mm comp x 22mm comp, DN13 DG10X-WRAS-425-L - 22mm comp x 22mm comp, DN13 DG50X-WRAS-226-L - 22mm PF x 22mm comp, DN13 DG10X-WRAS-426-L - 22mm PF x 22mm comp, DN13 DG50X-WRAS-227-L - 22mm PF x 22mm PF, DN13 DG10X-WRAS-427-L - 22mm PF x 22mm PF, DN13 DG50X-WRAS-228-L - ½” BSP (F) x M10 short, DN8 DG10X-WRAS-428-L - ½” BSP (F) x M10 short, DN8 DG50X-WRAS-229-L - ⅜” BSP (F) x M10 short, DN8 DG10X-WRAS-429-L - ⅜” BSP (F) x M10 short, DN8 DG50X-WRAS-230-L - 15mm comp x 15mm comp iso valve, DN10 DG10X-WRAS-430-L - 15mm comp x 15mm comp iso valve, DN10 DG50X-WRAS-231-L - ¾” BSP (F) x ¾” BSP (F) elbow, DN10 DG10X-WRAS-431-L - ¾” BSP (F) x ¾” BSP (F) elbow, DN10 DG50X-WRAS-232-L - ⅜” BSP (F) X ⅜” BSP (F), DN8 DG10X-WRAS-432-L - ⅜” BSP (F) X ⅜” BSP (F), DN8 DG50X-WRAS-233-L - ⅜” BSP (F) X ⅜” BSP (F) elbow, DN8 DG10X-WRAS-433-L - ⅜” BSP (F) X ⅜” BSP (F) elbow, DN8 DG50X-WRAS-234-L - ⅜” BSP (F) x ¼" BSP (F), DN8 DG10X-WRAS-434-L - ⅜” BSP (F) x ¼" BSP (F), DN8 DG50X-WRAS-235-L - ½” BSP (F) x ½" BSP (M), DN13 DG10X-WRAS-435-L - ½” BSP (F) x ½" BSP (M), DN13 DG50X-WRAS-236-L - 15mm comp x ½” BSP (M), DN13 DG10X-WRAS-436-L - 15mm comp x ½” BSP (M), DN13 DG50X-WRAS-237-L - ¾” BSP (F) x ¾" BSP (M), DN13 DG10X-WRAS-437-L - ¾” BSP (F) x ¾" BSP (M), DN13 DG50X-WRAS-238-L - ½” BSP (F) x ½” BSP (F) elbow, DN10 DG10X-WRAS-438-L - ½” BSP (F) x ½” BSP (F) elbow, DN10 DG50X-WRAS-239-L - ½” BSP (F) x ½” BSP (M), DN8 DG10X-WRAS-439-L - ½” BSP (F) x ½” BSP (M), DN8 DG50X-WRAS-240-L - ½” BSP (F) x ½” BSP (F), DN8 DG10X-WRAS-440-L - ½” BSP (F) x ½” BSP (F), DN8 DG50X-WRAS-241-L - ½” BSP (F) x 15mm comp iso valve, DN13 DG10X-WRAS-441-L - ½” BSP (F) x 15mm comp iso valve, DN13 DG50X-WRAS-242-L - ½” BSP (F) x ½” BSP (F), DN13 DG10X-WRAS-442-L - ½” BSP (F) x ½” BSP (F), DN13 DG50X-WRAS-243-L - ½” BSP (F) x 15mm comp, DN13 DG10X-WRAS-443-L - ½” BSP (F) x 15mm comp, DN13 DG50X-WRAS-244-L - 22mm comp x 22mm comp iso valve, DN13 DG10X-WRAS-444-L - 22mm comp x 22mm comp iso valve, DN13 DG50X-WRAS-245-L - 15mm comp x 15mm comp, DN13 DG10X-WRAS-445-L - 15mm comp x 15mm comp, DN13 DG50X-WRAS-246-L - 15mm comp x M12x1 short, DN10 DG10X-WRAS-446-L - 15mm comp x M12x1 short, DN10 DG50X-WRAS-247-L - ½” BSP (F) x 14.7mm comp iso valve, DN10 DG10X-WRAS-447-L - ½” BSP (F) x 14.7mm comp iso valve, DN10 DG50X-WRAS-248-L - ¾” BSP (F) x 21mm comp iso valve, DN13 DG10X-WRAS-448-L - ¾” BSP (F) x 21mm comp iso valve, DN13 DG50X-WRAS-249-L - 15mm comp x M12x1 long, DN10 DG10X-WRAS-449-L - 15mm comp x M12x1 long, DN10 DG50X-WRAS-250-L - ½” BSP (F) x M12x1 short, DN8 DG10X-WRAS-450-L - ½” BSP (F) x M12x1 short, DN8 DG50X-WRAS-251-L - ½” BSP (F) x 15mm PF, DN10 DG10X-WRAS-451-L - ½” BSP (F) x 15mm PF, DN10 DG50X-WRAS-252-L - ½” BSP (F) x 15mm PF iso valve, DN10 DG10X-WRAS-452-L - ½” BSP (F) x 15mm PF iso valve, DN10 DG50X-WRAS-253-L - ¾” BSP (F) x 22mm PF, DN13 DG10X-WRAS-453-L - ¾” BSP (F) x 22mm PF, DN13 DG50X-WRAS-254-L - ¾” BSP (F) x 22mm PF iso valve, DN13 DG10X-WRAS-454-L - ¾” BSP (F) x 22mm PF iso valve, DN13 DG50X-WRAS-255-L - ½” BSP (F) x 15mm PF, DN13 DG10X-WRAS-455-L - ½” BSP (F) x 15mm PF, DN13 DG50X-WRAS-256-L - ¾” BSP (F) x 15mm PF, DN13 DG10X-WRAS-456-L - ¾” BSP (F) x 15mm PF, DN13 DG50X-WRAS-257-L - ⅜” BSP (F) x M10x1 short, DN6 DG10X-WRAS-457-L - ⅜” BSP (F) x M10x1 short, DN6 DG50X-WRAS-258-L - ½” BSP (F) x M10x1 short, DN6 DG10X-WRAS-458-L - ½” BSP (F) x M10x1 short, DN6 DG50X-WRAS-259-L - ⅜” BSP (F) x M8x1 short, DN6 DG10X-WRAS-459-L - ⅜” BSP (F) x M8x1 short, DN6 DG50X-WRAS-260-L - ½” BSP (F) x M10x1 short, DN6 DG10X-WRAS-460-L - ½” BSP (F) x M10x1 short, DN6 DG50X-WRAS-261-L - ⅜” BSP (F) x M8x1 short, DN6 DG10X-WRAS-461-L - ⅜” BSP (F) x M8x1 short, DN6 DG50X-WRAS-262-L - ½” BSP (F) x 15mm PF, DN13 DG10X-WRAS-462-L - ½” BSP (F) x 15mm PF, DN13 DG50X-WRAS-263-L - ¾” BSP (F) x 15mm PF, DN13 DG10X-WRAS-463-L - ¾” BSP (F) x 15mm PF, DN13 DG50X-WRAS-264-L - M12x1 short x M8x1 short DG10X-WRAS-464-L - M12x1 short x M8x1 short DG50X-WRAS-265-L - M12x1 short x M8x1 short DG50X-WRAS-465-L - M12x1 short x M8x1 short DG50X-WRAS-266-L - F ½” BSP x 15mm push-fit iso valve DG50X-WRAS-466-L - F ½” BSP x 15mm push-fit iso valve Models added April 2025 DG10X-376-006-L, ½” BSP (F) x M8x1 short, DN6 DG10X-376-008-L, ½” BSP (F) x M8x1 short, DN8 DG50X-376-010-L, ½” BSP (F) x M8x1 short, DN6 DG50X-376-012-L, ½” BSP (F) x M8x1 short, DN8

Product Images

Approval Holder:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company

Manufacturer:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2110140

Size:

See model

Marking:

Tenby, WRAS, and date of manufacture (YYYY) on ferrule. Flow arrow on isolation valve.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

AX-SS-01 DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. AX-SS-01 DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. AX-SS-02 DN8 bore: 15mm compression, ⅜” & ½” captive nut. AX-SS-02 DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. AX-SS-02 DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. AX-SS-02 DN17 & DN19 bore: 22mm compression, ¾” captive nut. AX-SS-03 DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). AX-SS-03 DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). AX-SS-03 DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). AX-SS-03 DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). AX-SS-04 DN10 bore: 15mm compression with isolation valve, 15mm pushfit. AX-SS-04 DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. AX-SS-04 DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. AX-SS-07 DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. AX-SS-07 DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. AX-SS-08 DN8 bore: 15mm compression, ⅜” & ½” BSP (M). AX-SS-08 DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). AX-SS-08 DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). AX-SS-08 DN17 & DN19 bore: 22mm compression, ¾” BSP (M). AX-SS-09 DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. AX-SS-09 DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. AX-SS-09 DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. AX-SS-10 DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. AX-SS-10 DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. AX-SS-11 DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit AX-SS-11 DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. AX-SS-11 DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. AX-SS-12 DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). AX-SS-12 DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). AX-SS-12 DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).

Approval Holder:

Tenby Imports & Exports Ltd.

Company Name

Tenby Imports & Exports Ltd.

Address

Unit 1 Crown House, Otterspool Way, Watford, Hertfordshire

Postcode

WD25 8HL

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections (see models). Some models incorporate a screwdriver operated isolation valve. All compression and push-fit connections are for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 7.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2312018

Size:

See Model list. Note, for the connection sizes listed in the models below, use the following key: XXMM = XXmm compression, MXXx1 = MXXx1 (M) FXX” = XX” BSP (F) XXmm Pushfit = XXmm Pushfit

Marking:

Dingbo logo, WRAS and Date of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Model Code/Number (Connection Size) DB8MM-15MM×M10L (15MM × M10x1) DB8MM-15MM×M10S (15MM × M10×1) DB8MM-1/2×M10L (F1/2" × M10×1) DB8MM-1/2×M10S (F1/2" × M10×1) DB9MM-1/2×1/2 (F1/2" × F1/2") DB9MM-1/2×M12L (F1/2" × M12×1) DB9MM-1/2×M12S (F1/2" × M12×1) DB9MM-15MM×M12L (15MM × M12×1) DB9MM-15MM×M12S (15MM × M12×1) DB9MM-1/2×15MM (F1/2" × 15MM) DB9MM-15MM×15MM (15MM × 15MM) DB9MM-3/4×15MM (F3/4" × 15MM) DB9MM-1/2×15MMV (F1/2" × 15MM with VALVE) DB9MM-3/4×15MMV (F3/4" × 15MM with VALVE) DB12MM-1/2×1/2 (F1/2" × F1/2") DB12MM-1/2×15MM (F1/2" × 15MM) DB12MM-15MM×15MM (15MM × 15MM) DB12MM-3/4×15MM (F3/4" × 15MM) DB12MM-3/4×22MM (F3/4" × 22MM) DB12MM-3/4×15MMV (F3/4" × 15MM with VALVE) DB12MM-3/4×22MMV (F3/4" × 22MM with VALVE) DB19MM-3/4×22MM (F3/4" × 22MM) DB19MM-3/4C×22MM (F3/4" × 22MM) DB12MM-1/2 x 15mm Push- fit (F1/2" × 15mm Pushfit) DB12MM-3/4 x 15mm Push- fit (F3/4" × 15mm Pushfit) DB12MM-1/2 x 15mm Push- fit VALVE (F1/2" × 15mm Pushfit with VALVE) DB12MM-3/4 x 15mm Push- fit VALVE (F3/4" × 15mm Pushfit with VALVE) DB12MM-1/2 x 22mm Push- fit (F1/2" × 22mm Pushfit) DB12MM-3/4 x 22mm Push- fit (F3/4" × 22mm Pushfit) DB12MM-1/2 x 22mm Push- fit VALVE (F1/2" × 22mm Pushfit with VALVE) DB12MM-3/4 x 22mm Push- fit VALVE (F3/4" × 22mm Pushfit with VALVE) DB12MM-15mm Push-fit x 15mm Push-fit (15mm Pushfit × 15mm Pushfit) DB12MM-22mm Push-fit x 22mm Push-fit (22mm Pushfit × 22mm Pushfit) Note, any models with either ‘VALVE’ or ‘V’ on the end of the model name incorporate a screwdriver operated isolation valve.

Approval Holder:

Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Company Name

Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Address

No.388 SHUPU NORTH ROAD, LUCHENG LIGHT INDUSTRIAL ZONE, WENZHOU CITY, ZHEJIANG PROVINCE, CHINA 325019

View All Listings by this Company

Manufacturer:

Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Company Name

Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Address

No.388 SHUPU NORTH ROAD, LUCHENG LIGHT INDUSTRIAL ZONE, WENZHOU CITY, ZHEJIANG PROVINCE, CHINA 325019

View All Listings by this Company

Hydravend range of PVC coated (grey or white in colour), hytrel lined, flexible thermoplastic hoses, incorporating a white quadruple layered hose with a black TPE inner lining. The hoses are supplied with plastic or brass end connectors and with or without servicing valves. Maximum working pressure and temperature: 12.0 bar Cold water use only.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2312069

Size:

DN06, DN08, DN10, DN12

Marking:

Qualiflex logo, QWRAS, Temperature, Pressure and date of manufacture (YY) on Ferrule

Installation Requirements:

R001 R008

Expiry date:

31/12/2028

Model:

06HV 08HV 10HV 12HV Hose assembly part number follows the below format: (The example given is for a Ø6mm internal diameter, Hydravend Range, 900mm overall length, female to male fittings) DDHHLLLFNN Where DD = diameter HH = Hose type LLL = Length FF where each F = Fitting code covering type, size and material. (M = Male, F = Female, D = Compression, S = Standpipe, E = Elbow, J = JG Fitting & P = Qualflex pushfit) NN = Number

Approval Holder:

Hydralectric Group Ltd.

Company Name

Hydralectric Group Ltd.

Address

5 High Road, Byfleet, Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

General Email

jamie.balkwill@hydralectric.com

View All Listings by this Company

Manufacturer:

Hydralectric Group Ltd.

Company Name

Hydralectric Group Ltd.

Address

5 High Road, Byfleet, Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

General Email

jamie.balkwill@hydralectric.com

View All Listings by this Company