Spring loaded resilient trim check valve cartridge with plastic body and EPDM ‘O’-rings. For insertion into fittings with specifically sized bores. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0026 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.

WRAS Approval Number:

250404703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15

Marking:

Watts logo & DN15 on body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

149B040135 Type TK model IO

Approval Holder:

Socla SAS

Company Name

Socla SAS

Address

365, Rue du Lt Putier, 71530 Virey Le Grand, France

Phone

+33 3 85 97 42 42

View All Listings by this Company

Manufacturer:

Socla SAS

Company Name

Socla SAS

Address

365, Rue du Lt Putier, 71530 Virey Le Grand, France

Phone

+33 3 85 97 42 42

View All Listings by this Company

Range of single hole, single outlet fixed (over the rim swivel nozzle) bidet combination tap assemblies stainless steel or brass bodies with various finishes, incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates a swivel nozzle with a plastic aerator. The products are also supplied with a lever type pop-up waste. Maximum working pressure 3.0 Bar Maximum operating temperature 60.0°C

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.

WRAS Approval Number:

250402006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided, PEX lined flexible hose assemblies with a 3/8" BSP (F) captive nut end connections.

Marking:

VOLA on Operating Member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2030

Model:

VOLA HV4-XX Model VOLA HV4-XX made in Brass or Stainless-steel material are available with the different surface finish. Suffix “XX” indicate the number of surface and denotes: For Brass Versions: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 59=Brushed Natural Brass, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Nickel, B61=Brushed Black, B64=Brushed Copper, B70=Brushed Gold. For Stainless Steel Versions: 40=Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper.

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with dome type operating members (model 71 222 xx0 incorporates cross top operating members). The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250402007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections.

Marking:

Hansgrohe logo on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2030

Model:

71 014 xx0 Hansgrohe MyCube 2-handle basin mixer 150 with lever type pop-up waste set 71 122 xx0 Hansgrohe MySport 2-handle basin mixer 150 with lever type pop-up waste set 71 221 xx0 Hansgrohe Logis 2-handle basin mixer without waste set 71 222 xx0 Hansgrohe Logis 2-handle basin mixer 150 with lever type pop-up waste set Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Floor standing, single hole, single outlet (swivel) combination tap assembly with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to a shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0471 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout incorporating a manual diverter to a shower outlet.

WRAS Approval Number:

250404007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assembly with ½” BSP (F) captive nut end connections

Marking:

Lanbiao on operating member

Installation Requirements:

R001 R006 R020

Expiry date:

30/04/2030

Model:

F9901-** **Represents the following different surface treatments on body: 1. H‐Black 2. N‐ Nickel Brushed 3. GJS‐ Zirconium gold brushed 4. G‐ Zirconium gold 5. QTSL‐ Brushed bronze bright 6. QTS‐Brushed Bronze Matte 7. TJ‐ Titanium 8. TJLS‐ Titanium brushed 9. MGJ‐ Rose gold 10. MGJL‐ Rose gold brushed 11. HGT‐ Red bronze 12. HTL‐ Brushed brass 13. HTS‐ Brushed copper 14. PVDQH‐Gun Ash 15. HQ‐Gun Ash Brushed 16. Q‐Bronze 17. DYB‐Electrophoresis Matt White 18. STS‐Acid copper brushed 19. BZ‐Spray pearl white 20. B‐Spray matt white

Approval Holder:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Address

Xudou Villiage Qinggang Yuhuan Zhejiang

Postcode

317606

Country

China

Phone

18957382651

General Email

957989256@qq.com

View All Listings by this Company

Manufacturer:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Address

Xudou Villiage Qinggang Yuhuan Zhejiang

Postcode

317606

Country

China

Phone

18957382651

General Email

957989256@qq.com

View All Listings by this Company

Range of chemical dosing equipment which incorporate self-closing valves within a plastic body with EPDM o-rings. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. Only suitable for use with chemicals no greater than a FC3, additional backflow protection is required for chemicals greater than FC3. Maximum working pressure 9.0 bar. Maximum operating temperature 70ºC.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

250404706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) ¾” BSP (F)

Marking:

SEKO, model and technical information on adhesive label on case.

Installation Requirements:

R001 R040 R160 R415

Expiry date:

30/04/2030

Model:

PXB1F04N PROMAX BUTTON 1P FLEX 4LPM C PXS1F04N PROMAX SLIDE 1P FLEX 4LPM C PXB4F04N PROMAX BUTTON 4P FLEX 4LPM C PXS4F04N PROMAX SLIDE 4P FLEX 4LPM C PXB1F16N PROMAX BUTTON 1P FLEX 14LPM C PXB4F16N PROMAX BUTTON 4P FLEX 14LPM C PXB1F30N PROMAX BUTTON 1P FLEX 30LPM C PXB4F30N PROMAX BUTTON 4P FLEX 30LPM C PXS1F16N PROMAX SLIDE 1P FLEX 14LPM C PXS4F16N PROMAX SLIDE 4P FLEX 14LPM C PXS1F30N PROMAX SLIDE 1P FLEX 30LPM C PXS4F30N PROMAX SLIDE 4P FLEX 30LPM C DPB1F04N DILUIT PLUS BUTTON 1P FLEX 4LPM C DPS1F04N DILUIT PLUS SLIDE 1P FLEX 4LPM C DPB4F04N DILUIT PLUS BUTTON 4P FLEX 4LPM C DPS4F04N DILUIT PLUS SLIDE 4P FLEX 4LPM C DPB1F16N DILUIT PLUS BUTTON 1P FLEX 14LPM C DPB4F16N DILUIT PLUS BUTTON 4P FLEX 14LPM C DPB1F30N DILUIT PLUS BUTTON 1P FLEX 30LPM C DPB4F30N DILUIT PLUS BUTTON 4P FLEX 30LPM C DPS1F16N DILUIT PLUS SLIDE 1P FLEX 14LPM C DPS4F16N DILUIT PLUS SLIDE 4P FLEX 14LPM C DPS1F30N DILUIT PLUS SLIDE 1P FLEX 30LPM C DPS4F30N DILUIT PLUS SLIDE 4P FLEX 30LPM C

Approval Holder:

SEKO S.p.A

Company Name

SEKO S.p.A

Address

Via Giuseppe Di Vittorio n. 25 – 20068 Peschiera Borromeo (MI)

Country

Italy

View All Listings by this Company

‘LFLF10xx’ range of stainless steel press-fit fittings incorporating EPDM ‘O’-rings for use with ‘LFLP1001’ stainless-steel pipe. Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250415017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

LOFFREY, material code and size on fitting body. LOFFREY, material code, size, EN 10312 and date of manufacture (YYYY/M/D) on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

Equal Coupling: LFLF1001-15: 15mm, LFLF1001-18: 18mm, LFLF1001-22: 22mm, LFLF1001-28: 28mm, LFLF1001-35: 35mm, LFLF1001-42: 42mm, LFLF1001-54: 54mm, LFLF1001-65: 76.1mm, LFLF1001-80: 88.9mm, LFLF1001-100: 108mm. Reducer Coupling-A: LFLF1002-018015: 18mm×15mm, LFLF1002-022015: 22mm×15mm, LFLF1002-022018: 22mm×18mm, LFLF1002-028015: 28mm×15mm, LFLF1002-028018: 28mm×18mm, LFLF1002-028022: 28mm×22mm, LFLF1002-035015: 35mm×15mm, LFLF1002-035018: 35mm×18mm, LFLF1002-035022: 35mm×22mm, LFLF1002-035028: 35mm×28mm, LFLF1002-042015: 42mm×15mm, LFLF1002-042018: 42mm×18mm, LFLF1002-042022: 42mm×22mm, LFLF1002-042028: 42mm×28mm, LFLF1002-042035: 42mm×35mm, LFLF1002-054042: 54mm×42mm. Reducer Coupling-B: LFLF1003-018015: 18mm×15mm, LFLF1003-022015: 22mm×15mm, LFLF1003-022018: 22mm×18mm, LFLF1003-028015: 28mm×15mm, LFLF1003-028018: 28mm×18mm, LFLF1003-028022: 28mm×22mm, LFLF1003-035015: 35mm×15mm, LFLF1003-035018: 35mm×18mm, LFLF1003-035022: 35mm×22mm, LFLF1003-035028: 35mm×28mm, LFLF1003-042015: 42mm×15mm, LFLF1003-042018: 42mm×18mm, LFLF1003-042022: 42mm×22mm, LFLF1003-042028: 42mm×28mm, LFLF1003-042035: 42mm×35mm, LFLF1003-054015: 54mm×15mm, LFLF1003-054018: 54mm×18mm, LFLF1003-054022: 54mm×22mm, LFLF1003-054028: 54mm×28mm, LFLF1003-054035: 54mm×35mm, LFLF1003-054042: 54mm×42mm. Adjustable coupling: LFLF1004-15: 15mm, LFLF1004-18: 18mm, LFLF1004-22: 22mm, LFLF1004-28: 28mm, LFLF1004-35: 35mm, LFLF1004-42: 42mm, LFLF1004-54: 54mm, LFLF1004-65: 76.1mm, LFLF1004-80: 88.9mm, LFLF1004-100: 108mm. Female coupling: LFLF1005-15×Rp1/2: 15mm×Rp1/2, LFLF1005-22×Rp3/4: 22mm×Rp3/4, LFLF1005-28×Rp1: 28mm×Rp1, LFLF1005-35×Rp1‐1/4: 35mm×Rp1-1/4, LFLF1005-42×Rp1‐1/2: 42mm×Rp1-1/2, LFLF1005-54×Rp2: 54mm×Rp2. Male coupling: LFLF1006-15×R1/2: 15mm×R1/2, LFLF1006-18×R1/2: 18mm×R1/2, LFLF1006-22×R3/4: 22mm×R3/4, LFLF1006-28×R1: 28mm×R1, LFLF1006-35×R1‐1/4: 35mm×R1-1/4, LFLF1006-42×R1‐1/2: 42mm×R1-1/2, LFLF1006-54×R2: 54mm×R2. Rotatable coupling: LFLF1007-15×G1/2: 15mm×G1/2, LFLF1007-18×G1/2: 18mm×G1/2, LFLF1007-22×G3/4: 22mm×G3/4, LFLF1007-28×G1: 28mm×G1, LFLF1007-35×G1‐1/4: 35mm×G1-1/4, LFLF1007-42×G1‐1/2: 42mm×G1-1/2, LFLF1007-54×G2: 54mm×G2. 90° equal elbow-A： LFLF1008-15: 15mm, LFLF1008-18: 18mm, LFLF1008-22: 22mm, LFLF1008-28: 28mm, LFLF1008-35: 35mm, LFLF1008-42: 42mm, LFLF1008-54: 54mm, LFLF1008-65: 76.1mm, LFLF1008-80: 88.9mm, LFLF1008-100: 108mm. 90° equal elbow-B： LFLF1009-15: 15mm, LFLF1009-18: 18mm, LFLF1009-22: 22mm, LFLF1009-28: 28mm, LFLF1009-35: 35mm, LFLF1009-42: 42mm, LFLF1009-54: 54mm. Female elbow： LFLF1010-15×Rp1/2: 15mm×Rp1/2, LFLF1010-18×Rp1/2: 18mm×Rp1/2, LFLF1010-22×Rp3/4: 22mm×Rp3/4, LFLF1010-28×Rp1: 28mm×Rp1, LFLF1010-35×Rp1‐1/4: 35mm×Rp1-1/4, LFLF1010-42×Rp1‐1/2: 42mm×Rp1-1/2, LFLF1010-54×Rp2: 54mm×Rp2. Male elbow： LFLF1011-15×R1/2: 15mm×R1/2, LFLF1011-18×R1/2: 18mm×R1/2, LFLF1011-22×R1/2: 22mm×R1/2, LFLF1011-22×R3/4: 22mm×R3/4, LFLF1011-28×R1: 28mm×R1, LFLF1011-35×R1‐1/4: 35mm×R1-1/4, LFLF1011-42×R1‐1/2: 42mm×R1-1/2, LFLF1011-54×R2: 54mm×R2. 45° equal elbow-A： LFLF1012-15: 15mm, LFLF1012-18: 18mm, LFLF1012-22: 22mm, LFLF1012-28: 28mm, LFLF1012-35: 35mm, LFLF1012-42: 42mm, LFLF1012-54: 54mm. 45° equal elbow-B： LFLF1013-15: 15mm, LFLF1013-18: 18mm, LFLF1013-22: 22mm, LFLF1013-28: 28mm, LFLF1013-35: 35mm, LFLF1013-42: 42mm, LFLF1013-54: 54mm. Equal tee： LFLF1014-15: 15mm, LFLF1014-18: 18mm, LFLF1014-22: 22mm, LFLF1014-28: 28mm, LFLF1014-35: 35mm, LFLF1014-42: 42mm, LFLF1014-54: 54mm, LFLF1014-65: 76.1mm, LFLF1014-80: 88.9mm, LFLF1014-100: 108mm. Reducing tee： LFLF1015-018015: 18mm×15mm, LFLF1015-022015: 22mm×15mm, LFLF1015-022018: 22mm×18mm, LFLF1015-028015: 28mm×15mm, LFLF1015-028018: 28mm×18mm, LFLF1015-028022: 28mm×22mm, LFLF1015-035015: 35mm×15mm, LFLF1015-035018: 35mm×18mm, LFLF1015-035022: 35mm×22mm, LFLF1015-035028: 35mm×28mm, LFLF1015-042015: 42mm×15mm, LFLF1015-042018: 42mm×18mm, LFLF1015-042022: 42mm×22mm, LFLF1015-042028: 42mm×28mm, LFLF1015-042035: 42mm×35mm, LFLF1015-054015: 54mm×15mm, LFLF1015-054018: 54mm×18mm, LFLF1015-054022: 54mm×22mm, LFLF1015-054028: 54mm×28mm, LFLF1015-054035: 54mm×35mm, LFLF1015-054042: 54mm×42mm. Female tee： LFLF1016-15×Rp1/2: 15mm×Rp1/2, LFLF1016-18×Rp1/2: 18mm×Rp1/2, LFLF1016-22×Rp3/4: 22mm×Rp3/4, LFLF1016-28×Rp1/2: 28mm×Rp1/2, LFLF1016-28×Rp1: 28mm×Rp1, LFLF1016-35×Rp1‐1/4: 35mm×Rp1-1/4, LFLF1016-42×Rp1‐1/2: 42mm×Rp1-1/2, LFLF1016-54×Rp2: 54mm×Rp2. Male tee： LFLF1017-15×Rp1/2: 15mm×Rp1/2, LFLF1017-18×Rp1/2: 18mm×Rp1/2, LFLF1017-22×Rp3/4: 22mm×Rp3/4, LFLF1017-28×Rp1/2: 28mm×Rp1/2, LFLF1017-28×Rp1: 28mm×Rp1, LFLF1017-35×Rp1‐1/4: 35mm×Rp1-1/4, LFLF1017-42×Rp1‐1/2: 42mm×Rp1-1/2, LFLF1017-54×Rp2: 54mm×Rp2. Pipe： LFLP1001-15: 15mm, LFLP1001-18: 18mm, LFLP1001-22: 22mm, LFLP1001-28: 28mm, LFLP1001-35: 35mm, LFLP1001-42: 42mm, LFLP1001-54: 54mm, LFLP1001-65: 76.1mm, LFLP1001-80: 88.9mm, LFLP1001-100: 108mm.

Approval Holder:

Zhejiang Loffrey Technology Co., Ltd.

Company Name

Zhejiang Loffrey Technology Co., Ltd.

Address

No. 515 Binhai 15th Road, Xinghai Sub‐district, Wenzhou Economic and Technological Development Zone, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Loffrey Technology Co., Ltd.

Company Name

Zhejiang Loffrey Technology Co., Ltd.

Address

No. 515 Binhai 15th Road, Xinghai Sub‐district, Wenzhou Economic and Technological Development Zone, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

‘CFxx and TFxx’ range of brass compression fittings for use with copper pipes and Irish copper pipe (both manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: CF15 and CF16 models: 65°C. All other models: 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250415018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

CF19, TF09 and CF26 models: Valtech on body. All other models: Valtech on compression nut.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

CF01 - Straight Coupler CxC: ½", ¾", 1", 1¼", 1½", 2". CF03 - Straight Coupler CxC: ¾"*½", 1"*½", 1"*¾", 1¼"*¾", 1¼"*1", ½"*10mm, ½"*12mm, ½"*15mm, ¾"*22mm. CF01L - Repair Coupling CXC: ½"*½", ¾"*¾". CF07 - Straight Coupler M.I. X C: ½", ¾", 1", 1¼", 1½", 2", ½"*¾", ¾"*½", 1"*¾", ¾"*1", 1"*1¼", 1¼"*1", 1½"*1¼", 2"*1½". CF05 - Straight Coupler F.I. x C: ½", ¾", 1", 1¼", 1½", 2", ½"*¾", ¾"*½", 1"*¾", ¾"*1", 1¼"*1", 1“*1¼", 2“*1½". CF15 - Swivel Coupler F.I. x C: ½", ¾". CF02 - Elbow C x C: ½", ¾", 1", 1¼", 1½", 2", ¾"*½", 1"*¾", ½"*15mm, ¾"*22mm. CF08 - Elbow M.I. x C: ½", ¾", 1", 1¼", 1½", 2", ¾"*½", 1"*¾", ½"*¾", ¾"*1". CF06 - Elbow F.I. x C: ½", ¾", 1", 1¼", 1½", 2", ½"*¾", ¾"*½", ¾"*1", 1"*¾". CF10 - Wallplate Elbow F.I. x C: ½"*½", ¾"*¾", ½"*¾". CF11 - Equal Tees CxCxC: ½", ¾", 1", 1¼", 1½", 2". CF12 - Reducing Tee C x C x C: ½"*½"*¾", ¾"*¾"*½", ¾"*¾"*1", 1"*1"*½", 1"*1"*¾", 1¼"*1¼"*½", 1¼"*1¼"*¾", 1¼"*1¼"*1", 1½"*1½"*¾", 1½"*1½"*1", 1½"*1½"*1¼", ¾"*½"*¾", 1"*½"*1", 1"*½"*¾", 1"*¾"*1", ¾"*½"*½", 1"*¾"*¾", 1"*¾"*½", 1"*½"*½", 10mm*10mm*½", ½"*10mm*10mm, ½"*10mm*½", ½"*½"*10mm. CF24 - Cross CxCxCxC: ½", ¾", ¾"*½"*½"*½". CF16 - Swivel Elbow F.I. x C: ½", ¾". CF13 - Tee CxCxF.I.: ½", ¾", 1", ¾"*¾"*½", 1"*1"*½", 1"*1"*¾". CF19 - Reducing Set: ¾"*½", 1"*½", 1"*¾", 1¼"*½", 1¼"*¾", 1¼"*1", 1½"*½", 1½"*¾", 1½"*1", 1½"*1¼", 2"*½", 2"*¾", 2"*1", 2"*1¼", 2"*1½". CF17 - Flanged Tank Connector with Backnut: ½", ¾", 1", 1¼", 1½", 2". CF14 - Stop End: ½", ¾", 1", 1¼", 1½", 2". TF09 - Blank Cap and Washers: ½", ¾", 1", 1¼", 1½", 2". TF26 - Coupling Nut: ½", ¾", 1", 1¼", 1½", 2". CF26 - Compression Ring: ½", ¾", 1", 1¼", 1½", 2". Where M.I. = BSP (M) and F.I. = BSP (F).

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

1130 Baizhang Road Ningbo Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

1130 Baizhang Road Ningbo Zhejiang

Country

China

View All Listings by this Company

‘Universal Transition Coupling (UTC)’ range of plastic compression fittings for use with the following pipe types and sizes: Stainless steel (manufactured to ASTM A554/ BS EN 10312): ¾”, 1” & 1¼”. Galvanised (EN 10255): ¾”, 1”, 1¼”, 1½” & 2”. Copper (BS EN 1057): 15mm, 22mm & 28mm. PVC (BS EN 1452): 20mm & 2”. ABS (BS 5391-1): 20mm, 25mm & 32mm. PE80 & PE100 pipe (to BS EN 12201): 20mm, 25mm, 32mm, 50mm & 63mm. For use above and below ground. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250402030

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Philmac, Universal Transition Fitting, size & date of manufacture (M/YY) on body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

87113300 UTC Joiner 15-21mm x 15-21mm 87114300 UTC Joiner 21-27mm x 15-21mm 87114400 UTC Joiner 21-27mm x 21-27mm 87115300 UTC Joiner 27-34mm x 15-21mm 87115400 UTC Joiner 27-34mm x 21-27mm 87115500 UTC Joiner 27-34mm x 27-34mm 87116500 UTC Joiner 39-43mm x 27-34mm 87116600 UTC Joiner 39-43mm x 39-43mm 87117700 UTC Joiner 34-39mm x 34-39mm 87118800 UTC Joiner 47-49mm x 47-49mm 87119900 UTC Joiner 59-61mm x 59-61mm 87123100 UTC End Connector MI BSP 15-21mm x ½" 87123200 UTC End Connector MI BSP 15-21mm x ¾" 87123300 UTC End Connector MI BSP 15-21mm x 1" 87124200 UTC End Connector MI BSP 21-27mm x ¾" 87124300 UTC End Connector MI BSP 21-27mm x 1" 87124400 UTC End Connector MI BSP 21-27mm x 1¼" 87125200 UTC End Connector MI BSP 27-34mm x ¾" 87125300 UTC End Connector MI BSP 27-34mm x 1" 87125400 UTC End Connector MI BSP 27-34mm x 1¼" 87125500 UTC End Connector MI BSP 27-34mm x 1½" 87133300 UTC Tee 15-21mm 88103200 UTC x 3G Metric/Imperial Joiner 15-21 x 20/½" 88103300 UTC x 3G Metric/Imperial Joiner 15-21 x 25/¾" 88104200 UTC x 3G Metric/Imperial Joiner 21-27 x 20/½" 88104300 UTC x 3G Metric/Imperial Joiner 21-27 x 25/¾" 88105200 UTC x 3G Metric/Imperial Joiner 27-34 x 20/½" 88105300 UTC x 3G Metric/Imperial Joiner 27-34 x 25/¾" 88105400 UTC x 3G Metric/Imperial Joiner 27-34 x 32/1" 88106400 UTC x 3G Metric/Imperial Joiner 39-43 x 32/1" 88107400 UTC x 3G Metric/Imperial Joiner 34-39 x 32/1" 88108600 UTC x 3G Metric/Imperial Joiner 47-49 x 50/1½" 88108700 UTC x 3G Metric/Imperial Joiner 47-49 x 63/2" 88109700 UTC x 3G Metric/Imperial Joiner 59-61 x 63/2" 88153300 UTC x 3G Metric/Imperial Elbow 15-21 x 25/¾" 88154300 UTC x 3G Metric/Imperial Elbow 21-27 x 25/¾" 88154400 UTC x 3G Metric/Imperial Elbow 21-27 x 32/1" 88155300 UTC x 3G Metric/Imperial Elbow 27-34 x 25/¾" 88165300 UTC x 3G Metric/Imperial Elbow 27-34 x 32/1"

Manufacturer:

Philmac Pty Ltd.

Company Name

Philmac Pty Ltd.

Address

47-59 Deeds Road, North Plympton, SA 5037

Country

Australia

View All Listings by this Company

Range of copper end feed fittings for use with copper tube to EN 1057. For above and below ground use. Maximum working pressure: 6mm-54mm 16.0bar, 64mm-108mm 10.0bar. Maximum operating temperature 85°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250108018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Flomasta & size on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

5001: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5002: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm，64mm，67mm，76mm，89mm，108mm 5040: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5041: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5090: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5092: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5085: 12mm，14mm，15mm，16mm，18mm，22mm 5086: 12mm，14mm，15mm，16mm，18mm，22mm 5270: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5301: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，22mm，28mm，35mm，42mm， 45mm, 64mm，67mm，76mm，89mm，108mm 5240: 8mm x 6mm ， 10mm x 6mm ， 10mm x 8mm ， 12mm x 6mm ， 12mm x 8mm ， 12mm x 10mm ， 14mm x 10mm ， 14mm x 12mm ， 15mm x 8mm ， 15mm x 10mm，15mm x 12mm，15mm x 14mm， 16mm x 10mm，16mm x 12mm，16mm x 14mm， 16mm x 15mm，18mm x 10mm，18mm x 12mm， 18mm x 14mm，18mm x 15mm，18mm x 16mm， 20mm x 10mm，20mm x 12mm，20mm x 14mm， 20mm x 15mm，20mm x 16mm，20mm x 18mm， 22mm x 10mm，22mm x 12mm，22mm x 14mm， 22mm x 15mm，22mm x 16mm，22mm x 18mm， 22mm x 20mm，25mm x 22mm，28mm x 10mm， 28mm x 12mm，28mm x 14mm，28mm x 15mm， 28mm x 16mm，28mm x 18mm，28mm x 20mm， 28mm x 22mm，32mm x 16mm，32mm x 18mm， 32mm x 20mm，32mm x 22mm，32mm x 28mm， 35mm x 12mm，35mm x 15mm，35mm x 18mm， 35mm x 22mm，35mm x 28mm，36mm x 22mm， 36mm x 28mm，36mm x 32mm，36mm x 35mm， 40mm x 22mm，40mm x 28mm，40mm x 32mm， 40mm x 36mm，42mm x 15mm，42mm x 18mm， 42mm x 22mm，42mm x 28mm，42mm x 32mm， 42mm x 35mm，42mm x 36mm，52mm x 32mm， 52mm x 36mm，52mm x 40mm，52mm x 42mm， 54mm x 15mm，54mm x 22mm，54mm x 28mm， 54mm x 35mm，54mm x 42mm，54mm x 52mm 64mm x 35mm，64mm x 42mm，64mm x 54mm， 67mm x 28mm，67mm x 35mm，67mm x 42mm， 67mm x 54mm，76mm x 28mm，76mm x 35mm， 76mm x 42mm，76mm x 54mm，76mm x 64mm， 89mm x 54mm，89mm x 64mm，89mm x 76mm， 108mm x 54mm, 108mm x 64mm, 108mm x 76mm，108mm x 89mm 5243: 8mm x 6mm ， 10mm x 6mm ， 10mm x 8mm ， 12mm x 6mm ， 12mm x 8mm ， 12mm x 10mm ， 14mm x 10mm ， 14mm x 12mm ， 15mm x 8mm ， 15mm x 10mm，15mm x 12mm，15mm x 14mm， 16mm x 10mm，16mm x 12mm，16mm x 14mm， 16mm x 15mm，18mm x 10mm，18mm x 12mm， 18mm x 14mm，18mm x 15mm，18mm x 16mm， 20mm x 10mm，20mm x 12mm，20mm x 14mm， 20mm x 16mm，20mm x 18mm，22mm x 10mm， 22mm x 12mm，22mm x 14mm，22mm x 15mm， 22mm x 16mm，22mm x 18mm，22mm x 20mm， 25mm x 12mm，25mm x 14mm，25mm x 16mm， 25mm x 18mm，25mm x 22mm，28mm x 10mm， 28mm x 12mm，28mm x 14mm，28mm x 15mm， 28mm x 16mm，28mm x 18mm，28mm x 20mm， 28mm x 22mm，32mm x 18mm，32mm x 20mm， 32mm x 22mm，32mm x 28mm，35mm x 12mm， 35mm x 15mm，35mm x 18mm，35mm x 22mm， 35mm x 28mm，36mm x 18mm，36mm x 22mm， 36mm x28mm，36mm x 32mm，36mm x 35mm， 40mm x 22mm，40mm x 28mm，40mm x 32mm， 40mm x 35mm，40mm x 36mm，42mm x 15mm， 42mm x 18mm，42mm x 22mm，42mm x 28mm， 42mm x 32mm，42mm x 35mm，42mm x 36mm， 42mm x 40mm，52mm x 28mm，52mm x 32mm， 52mm x 35mm，52mm x 36mm，52mm x 40mm， 52mm x42mm，54mm x 15mm，54mm x 18mm， 54mm x 22mm，54mm x 28mm，54mm x 32mm， 54mm x 35mm，54mm x 36mm，54mm x 40mm， 54mm x 42mm，54mm x 52mm, 64mm x 35mm，64mm x 42mm，64mm x 54mm， 67mm x 28mm，67mm x 35mm，67mm x 42mm， 67mm x 54mm，76mm x 28mm，76mm x 35mm， 76mm x 42mm，76mm x 54mm，76mm x 64mm， 89mm x 54mm，89mm x 64mm，89mm x 76mm， 108mm x 54mm，108mm x 64mm， 108mm x 76mm，108mm x 89mm 5130: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5130R: 6mm x 8mm x 6mm，8mm x 6mm x 6mm ， 8mm x 6mm x 8mm，8mm x 10mm x 8mm， 10mm x 8mm x 6mm ， 10mm x 6mm x 10mm ， 10mm x 8mm x 8mm ， 10mm x 8mm x 10mm ，10mm x 10mm x 8mm ， 10mm x 12mm x 10mm ， 10mm x 15mm x 10mm ， 12mm x 8mm x 8mm ， 12mm x 8mm x 10mm ， 12mm x 8mm x 12mm ， 12mm x 10mm x 8mm ， 12mm x 10mm x 10mm ， 12mm x 10mm x 12mm ， 12mm x 12mm x 8mm ， 12mm x 12mm x 10mm，12mm x 14mm x 12mm， 12mm x 15mm x 12mm，12mm x 16mm x 12mm， 12mm x 18mm x 12mm，14mm x 10mm x 10mm， 14mm x 10mm x 12mm，14mm x 10mm x 14mm， 14mm x 12mm x 10mm，14mm x 12mm x 12mm， 14mm x 12mm x 14mm，14mm x 14mm x 10mm， 14mm x 14mm x 12mm，14mm x 16mm x 12mm， 14mm x 16mm x 14mm，14mm x 18mm x 12mm， 14mm x 18mm x 14mm，14mm x 22mm x 14mm， 15mm x 8mm x 10mm ， 15mm x 8mm x 12mm ， 15mm x 10mm x 10mm，15mm x 10mm x 12mm， 15mm x 12mm x 10mm，15mm x 12mm x 12mm， 15mm x 15mm x 10mm，15mm x 15mm x 12mm， 15mm x 18mm x 12mm，15mm x 18mm x 15mm， 15mm x 22mm x 15mm，15mm x 28mm x 15mm， 16mm x 10mm x 16mm，16mm x 12mm x 12mm， 16mm x 12mm x 14mm，16mm x 12mm x 16mm， 16mm x 14mm x 12mm，16mm x 14mm x 14mm， 16mm x 14mm x 16mm，16mm x 16mm x 10mm， 16mm x 16mm x 12mm，16mm x 16mm x 14mm， 16mm x 18mm x 14mm，16mm x 18mm x 16mm， 16mm x 20mm x 16mm，16mm x 22mm x 16mm， 18mm x 10mm x 10mm，18mm x 10mm x 12mm， 18mm x 10mm x 15mm，18mm x 10mm x 18mm， 18mm x 12mm x 12mm，18mm x 12mm x 14mm， 18mm x 12mm x 15mm，18mm x 12mm x 16mm， 18mm x 12mm x 18mm，18mm x 14mm x 12mm， 18mm x 14mm x 14mm，18mm x 14mm x 16mm， 18mm x 14mm x 18mm，18mm x 15mm x 12mm， 18mm x 15mm x 15mm，18mm x 15mm x 18mm， 18mm x 16mm x 12mm，18mm x 16mm x 14mm， 18mm x 16mm x 16mm，18mm x 16mm x 18mm， 18mm x 18mm x 10mm，18mm x 18mm x 12mm， 18mm x 18mm x 14mm，18mm x 18mm x 15mm， 18mm x 18mm x 16mm，18mm x 20mm x 18mm， 18mm x 22mm x 14mm，18mm x 22mm x 15mm， 18mm x 22mm x 18mm，18mm x 28mm x 18mm， 20mm x 12mm x 20mm，20mm x 14mm x 18mm， 20mm x 14mm x 20mm，20mm x 16mm x 16mm， 20mm x 16mm x 18mm，20mm x 16mm x 20mm， 20mm x 18mm x 16mm，20mm x 18mm x 18mm， 20mm x 18mm x 20mm，20mm x 20mm x 12mm， 20mm x 20mm x 14mm，20mm x 20mm x 16mm， 20mm x 20mm x 18mm，20mm x 22mm x 20mm， 22mm x 10mm x 22mm，22mm x 12mm x 12mm， 22mm x 12mm x 14mm，22mm x 12mm x 15mm， 22mm x 12mm x 18mm，22mm x 12mm x 22mm， 22mm x 14mm x 12mm，22mm x 14mm x 14mm， 22mm x 14mm x 15mm，22mm x 14mm x 16mm， 22mm x 14mm x 18mm，22mm x 14mm x 22mm， 22mm x 15mm x 12mm，22mm x 15mm x 15mm， 22mm x 15mm x 18mm，22mm x 15mm x 22mm， 22mm x 16mm x 14mm，22mm x 16mm x 16mm， 22mm x 16mm x 18mm，22mm x 16mm x 22mm， 22mm x 18mm x 12mm，22mm x 18mm x 14mm， 22mm x 18mm x 15mm，22mm x 18mm x 16mm， 22mm x 18mm x 18mm，22mm x 18mm x 22mm， 22mm x 20mm x 22mm ，22mm x 22mm x10mm ， 22mm x 22mm x 12mm，22mm x 22mm x 14mm， 22mm x 22mm x 15mm，22mm x 22mm x 16mm， 22mm x 22mm x 18mm，22mm x 22mm x 20mm， 22mm x 28mm x 15mm，22mm x 28mm x 22mm， 22mm x 35mm x 22mm，28mm x 10mm x 28mm， 28mm x 12mm x 12mm，28mm x 12mm x 15mm， 28mm x 12mm x 18mm ，28mm x 12mm x22mm ， 28mm x 12mm x 28mm，28mm x 14mm x 18mm， 28mm x 14mm x 28mm，28mm x 15mm x 12mm， 28mm x 15mm x 15mm，28mm x 15mm x 18mm， 28mm x 15mm x 22mm，28mm x 15mm x 28mm， 28mm x 16mm x 15mm，28mm x 16mm x 16mm， 28mm x 16mm x 18mm，28mm x 16mm x 22mm， 28mm x 16mm x 28mm，28mm x 18mm x 12mm， 28mm x 18mm x 15mm，28mm x 18mm x 16mm， 28mm x 18mm x 18mm，28mm x 18mm x 22mm， 28mm x 18mm x 28mm，28mm x 20mm x 20mm， 28mm x 20mm x 28mm，28mm x 22mm x 12mm， 28mm x 22mm x 15mm，28mm x 22mm x 16mm， 28mm x 22mm x 18mm，28mm x 22mm x 22mm， 28mm x 22mm x 28mm，28mm x 28mm x 12mm， 28mm x 28mm x 14mm，28mm x 28mm x 15mm， 28mm x 28mm x 16mm，28mm x 28mm x 18mm， 28mm x 28mm x 22mm，28mm x 42mm x 28mm， 35mm x 12mm x 35mm，35mm x 15mm x 15mm， 35mm x 15mm x 22mm，35mm x 15mm x 28mm， 35mm x 15mm x 35mm，35mm x 18mm x 22mm， 35mm x 18mm x 28mm，35mm x 18mm x 35mm， 35mm x 22mm x 15mm，35mm x 22mm x 18mm， 35mm x 22mm x 22mm，35mm x 22mm x 28mm， 35mm x 22mm x 35mm，35mm x 28mm x 15mm， 35mm x 28mm x 18mm，35mm x 28mm x 22mm， 35mm x 28mm x 28mm，35mm x 28mm x 35mm， 35mm x 35mm x 15mm，35mm x 35mm x 18mm， 35mm x 35mm x 22mm，35mm x 35mm x 28mm， 35mm x 42mm x 35mm，42mm x 14mm x 42mm， 42mm x 15mm x 42mm，42mm x 18mm x 42mm， 42mm x 22mm x 35mm，42mm x 22mm x 42mm， 42mm x 28mm x 22mm，42mm x 28mm x 28mm， 42mm x 28mm x 35mm，42mm x 28mm x 42mm， 42mm x 35mm x 28mm，42mm x 35mm x 35mm， 42mm x 35mm x 42mm，42mm x 42mm x 22mm， 42mm x 42mm x 28mm，42mm x 42mm x 35mm， 42mm x 54mm x 42mm，52mm x 28mm x 52mm， 52mm x 32mm x 52mm，54mm x 15mm x 54mm， 54mm x 18mm x 54mm，54mm x 22mm x 42mm， 54mm x 22mm x 54mm，54mm x 28mm x 42mm， 54mm x 28mm x 54mm，54mm x 35mm x 35mm， 54mm x 35mm x 42mm，54mm x 35mm x 54mm， 54mm x 42mm x 42mm ，54mm x42mm x 54mm ， 54mm x 54mm x 22mm，54mm x 54mm x 28mm， 54mm x 54mm x 35mm，54mm x 54mm x 42mm， 64mm x 35mm x 64mm，64mm x 42mm x 64mm， 64mm x 54mm x 64mm，67mm x 28mm x 67mm， 67mm x 35mm x 67mm，67mm x 42mm x 67mm， 67mm x 54mm x 67mm，76mm x 28mm x 76mm， 76mm x 35mm x 76mm，76mm x 42mm x 76mm， 76mm x 54mm x 76mm，76mm x 64mm x 76mm， 89mm x 54mm x 89mm，89mm x 64mm x 89mm， 89mm x 76mm x 89mm，108mm x 35mm x 108mm， 108mm x 54mm x 108mm， 108mm x 64mm x 108mm， 108mm x 76mm x 108mm， 108mm x 89mm x 108mm 5062: 12mm x 1/2"，14mm x 1/2"，15mm x 1/2"， 16mm x 1/2"，18mm x 1/2"，12mm x 3/4''， 14mm x 3/4''，15mm x 3/4''，16mm x 3/4''， 18mm x 3/4''，22mm x 3/4''，18mm x 1''， 22mm x 1''，28mm x 11/4''，54mm x 2'' 5063: 12mm x 1/2"，14mm x 1/2"，15mm x 1/2"， 16mm x 1/2"，15mm x 3/4''，16mm x 3/4''， 18mm x 3/4''，22mm x 3/4''，22mm x 1'' 5270S: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm

Approval Holder:

Kingfisher Plc.

Company Name

Kingfisher Plc.

Address

1 Paddington Square, London

Postcode

W2 1GG

View All Listings by this Company

Range of overhead shower outlets brass and stainless-steel bodies in various finishes, incorporating stainless steel filter washers and flow regulators. Open outlet use only. Maximum operating temperature 85⁰C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250408013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Coalbrook logo on the upper face

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

XX 4013 YY, XX 4014 YY. XX denotes the name of the product, example CO – Coalbrook. Middle 4 numbers is a numeric code allocated to the model and remains constant. YY denotes the colour finish, examples are but not limited to – BN – Brushed Nickel. CP – Chrome. GM – Gunmetal. BB – Brushed Brass.

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company