Range of stop valves with brass bodies and an EPDM washer. 15mm and 22mm for use with half-hard copper pipe of R250 acc. to EN1057. 20mm and 25mm for use with half hard copper pipe of R250 acc. to BS2871-2. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

2111362

Size:

Please refer to model.

Marking:

Avonfow, flow arrow and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

EPH_VAL20_0021: 15mm compression x 15mm compression, EPH_VAL20_0022: 22mm compression x 22mm compression, EPH_VAL20_0023: 15mm compression x 25mm compression, EPH_VAL20_0024: 15mm compression x 20mm compression, EPH_VAL20_0025: 22mm compression x 25mm compression.

Approval Holder:

JIANGXI AVONFLOW HVAC TECH CO., LTD.

Company Name

JIANGXI AVONFLOW HVAC TECH CO., LTD.

Address

Xuri Area Shangrao Economic Development Zone, Jiangxi Province

View All Listings by this Company

Range of thermostatic circulation valves incorporating brass bodies and EDPM ‘O’-rings. Some models incorporate a gauge port. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

2111307

Size:

DN15 – ½” BSP (F) DN20 – ¾” BSP (F)

Marking:

IMI Hydronic Engineering logo (TA), PN16, DN, CR, Zero & flow arrow on body. IMI Hydronic Engineering logo (TA) and temperature on handwheel

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

With Thermometer 52 820-015 Ta-Therm-Zero DN15 +55° 52 820-020 Ta-Therm-Zero DN20 +55° Without Thermometer 52 820-115 Ta-Therm-Zero DN15 +55° 52 820-120 Ta-Therm-Zero DN20 +55° With measuring port 52 820-815 Ta-Therm-Zero DN15 +55° 52 820-820 Ta-Therm-Zero DN20 +55°

Approval Holder:

IMI Hydronic Engineering

Company Name

IMI Hydronic Engineering

Address

Route de Crassier 19, CH-1262 Eysins, Switzerland

View All Listings by this Company

Range of double regulating valves incorporating bronze bodies, brass disc face (½” - ¾” models) or PTFE (1” - 2” models), PTFE plate and NBR ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

2201809

Size:

½” BSP (F) - 2” BSP (F)

Marking:

Shield on operating stem. PN, flow arrow and size cast on body. Shield & WRAS on operating member.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

SD9951 DOUBLE REGULATING VALVES

Product Images

Approval Holder:

SHIELD FIRE SAFETY & SECURITY LTD

Company Name

SHIELD FIRE SAFETY & SECURITY LTD

Address

Unit 3, Endeavour Drive Basildon- Essex

Postcode

SS14 3WF

Country

United Kingdom

Phone

+44 (0) 1708 377731

General Email

info@shieldglobal.com

View All Listings by this Company

Range of double regulating valves incorporating bronze bodies, brass disc face (½” - ¾” models) or PTFE (1” - 2” models), PTFE plate and NBR ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

2201810

Size:

½” BSP (F) - 2” BSP (F)

Marking:

FIVC, PN, flow arrow and size cast on body. FIVC & WRAS on operating member.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

1954 & FSBXXXO25GF21 DOUBLE REGULATING VALVES

Product Images

Approval Holder:

FlowCon International Valve Company (FIVC)

Company Name

FlowCon International Valve Company (FIVC)

Address

Trafikcenter Alle 17, DK-4200 Slagelse, Denmark

Phone

+45 2912 4363

General Email

mt@flowconivc.com

View All Listings by this Company

Range of double regulating valves incorporating bronze bodies, brass disc face (½” - ¾” models) or PTFE (1” - 2” models), PTFE plate and NBR ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

2201811

Size:

½” BSP (F) - 2” BSP (F)

Marking:

Maplef, PN, flow arrow and size cast on body. Maplef Canada, model & WRAS on operating member.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

MV60-161 DOUBLE REGULATING VALVES

Approval Holder:

Maplef Valves and Fittings Ltd

Company Name

Maplef Valves and Fittings Ltd

Address

Suite 1488 1130 West Pender St Vancouver, BC, V6E 4A4

Country

Canada

Phone

001 604 770 2440

General Email

s.aljaf@maplefgeneralsupplier.ca

View All Listings by this Company

Range of polyphosphate scale inhibitors comprising of an inline (nickel plated) brass body and head, and a separate cartridge with an aluminium body and plastic cap. Maximum working pressure 5.0 bar. Cold water use only.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Size:

15mm compression

Marking:

Models BWT AC002100 & AC002400: BWT on adhesive label on body. Models Permutit PT000150 & PT000300: BWT and Permutit on sump base.

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

31/10/2026

Model:

BWT AC002100 (head and cartridge) & AC002400 (refill cartridge only) Permutit PT000150 (head and cartridge) & PT000300 (refill cartridge only).

Approval Holder:

BWT Holding GmbH

Company Name

BWT Holding GmbH

Address

Walter-Simmer-Straße 4 Mondsee

Postcode

5310

Country

Austria

Phone

+436648172152

General Email

andreas.stiegler@aidu.solutions

View All Listings by this Company

Manufacturer:

BWT Holding GmbH

Company Name

BWT Holding GmbH

Address

Walter-Simmer-Straße 4 Mondsee

Postcode

5310

Country

Austria

Phone

+436648172152

General Email

andreas.stiegler@aidu.solutions

View All Listings by this Company

Range of electrolytic scale reducers, with a chromium plated copper body and zinc alloy anodes. Maximum working pressure 5.0 bar. Cold water use only.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Size:

22mm compression Model added March 2022: ½” BSP (F)

Marking:

TrappeX on label on body.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

30/06/2026

Model:

Trappex Centrascale Electrolytic scale reducer 22mm Model added March 2022: Scalematic ½ inch electrolytic scale inhibitor

Approval Holder:

Trappex Ltd.

Company Name

Trappex Ltd.

Address

59 Springwood Hall Gardens, Huddersfield

Postcode

HD1 4HA

Country

United Kingdom

General Email

info@trappex.co.uk

View All Listings by this Company

Silver and copper disinfection ion generator with a plastic body, incorporating a plastic flow switch. Maximum working pressure 9.0 bar. For cold water use only

Section:

2415 Water conditioners - Disinfectant ion generators

WRAS Approval Number:

2107067

Note:

This product actively uses copper for microorganism control purposes. These are subject to the EU Biocidal Products Regulation EU 528/2012. The EU Commissions’ decision of 13 February and 26 June 2014 granted the UK limited essential use derogations only for the control of legionella and limits the range of applications where this product can be used. Users should ensure these types of products are used in accordance with the authorisations issued by the HSE. Users should refer to the HSE website to keep themselves up to date on progress or for further information – www.hse.org.uk/ legionnaires/faqs.htm

Size:

22mm spigot inlet & 22mm push fit outlet.

Marking:

ProEconomy Limited and Ray on adhesive label on body

Installation Requirements:

R001 R150 R170 R290 R415

Expiry date:

31/07/2026

Model:

Ray unit

Approval Holder:

ProEconomy Ltd.

Company Name

ProEconomy Ltd.

Address

23 Beaufort Court, Roebuck Way, Knowlhill, Milton Keynes

Postcode

MK5 8HL

View All Listings by this Company

Manufacturer:

ProEconomy Ltd.

Company Name

ProEconomy Ltd.

Address

23 Beaufort Court, Roebuck Way, Knowlhill, Milton Keynes

Postcode

MK5 8HL

View All Listings by this Company

Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 6.0 bar. Cold water use only.

Section:

2450 Water softeners

Size:

¾” BSP (M) inlet/outlet or 1” BSP (M) inlet/outlet

Marking:

Monarch Company details, model and other product info on adhesive label on rear of body. Model on front

Installation Requirements:

R001 R150 R170 R290 R415

Expiry date:

30/04/2026

Proviso:

Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.

Model:

Mini Aqua HE CS100HE PROSOFT100HE EVER 9 Midi HE CS150HE PROSOFT150HE EVER 12 Master HE CS200HE PROSOFT200HE EVER 18 Matrix HE CS300HE PROSOFT300HE EVER 30 PS12 HE PS15 HE GS4000 HE GS6000 HE LPS HE PROSOF 120 XE PROSOFT 120 XE PROSOF 160 XE PROSOFT 160 XE PROSOF 350 XE PROSOFT 350 XE SOF3000HE SOF6000HE

Approval Holder:

Monarch Water Ltd

Company Name

Monarch Water Ltd

Address

Fair Green Diss Norfolk

Postcode

IP22 4DG

Country

United Kingdom

Phone

01986 784759

General Email

kdelaney@monarchwater.co.uk

View All Listings by this Company

‘DURACON® M90-57 WK2001 & DURACON® M270-57 WK2001’. Grades 'M90-57 WK2001BG' & 'M270-57 WK2001BG' were added to the approval during September 2022. White coloured, injection moulded POM materials. For use with water up to 85°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2201507

Expiry date:

31/01/2027

Approval Holder:

Daicel Corporation

Company Name

Daicel Corporation

Address

JR Shinagawa East Building, 18-1, Konan 2-Chome, Minato-Ku, Tokyo, 108-8280

Country

Japan

Phone

+81 3 6711 8605 Fax: +81 3 6711 8633

View All Listings by this Company