Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Wall Mounted Undefinable Air Gap - See IRN's

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Wall mounted Concealed Undefinable Air Gap – See IRN’s

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of three-hole, brass bodied, single outlet (fixed) combination tap assemblies available with various finishes (see models). The products incorporate either a non-rising spindle (models 1648 and 1881 only) or quarter turn ceramic disc (all other models) headworks with either cross top (models 1648 and 1881 only) or single lever (all other models) operating members. The spout outlet incorporates a plastic aerator. The products are supplied with metal backnuts and lever operated pop-up wastes. Maximum working pressure 3.0 Bar Maximum operating temperature 65.0°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250702039

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Drummonds logo on side valve operating member

Installation Requirements:

R001 R005 R010

Expiry date:

31/07/2030

Model:

DAD1640*UK The Coll Lever 3 Hole Basin Mixer DAD1648*UK The Mull Classic 3 Hole Basin Mixer DAD1659*MUK The Chessleton Lever 3 Hole Basin Mixer DAD1659*UK The Chessleton Lever 3 Hole Basin Mixer DAD1663*UK The Chessleton Lever 3 Hole Basin Mixer DAD1668*MUK The Coll Lever 3 Hole Basin Mixer DAD1668*UK The Coll Lever 3 Hole Basin Mixer DAD1881* The Bibury 3 Hole Basin Mixer Where * denotes the finish, and can be replaced with any of the following: B – Unlacquered Brass, C – Chrome, N – Nickel, Q – Brushed Nickel, V – Antique Brushed Brass, W – Antique Nickel, X – Brushed Brass, Y – Antique Bronze, Z - Antique Brass

Approval Holder:

Drummonds Bathrooms Ltd

Company Name

Drummonds Bathrooms Ltd

Address

Unit 2c Henley Business Park Pirbright Road Normandy Surrey

Postcode

GU3 2DX

Country

United Kingdom

General Email

nick@drummonds-uk.com

View All Listings by this Company

Stainless steel single coil indirect DHW calorifier Maximum working pressure Primary/Secondary - 25/8 bar. Maximum operating temperature Primary/Secondary - 200/80 °C

Section:

0820 Cylinders

Section Subtitle:

Indirectly heated, coil type, stainless steel.

WRAS Approval Number:

250704714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M) 1 ¼” (M)

Marking:

Strebel Heating Technology, model no., serial no., year of manufacture, technical info and contact info on label.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

S-LC-I 500 S-LC-I 800 S-LC-I 1000 S-LC-I 1500 S-LC-I 2000 S-LC-I 2500

Approval Holder:

Strebel Heating Ltd.

Company Name

Strebel Heating Ltd.

Address

10 Invincible Road Farnborough Hampshire

Postcode

GU14 7QU

Country

United Kingdom

Phone

01276 685 422

General Email

justin.jearum@strebel.co.uk

View All Listings by this Company

Expansion vessel with a carbon steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾" BSP (M).

Marking:

Aquasystem logo (brand of Zilio Industries SpA) and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

AR2

Approval Holder:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly which incorporates an isolation valve (suitable for back flow protection against fluid category 3) and a stainless-steel braided EPDM lined hose. The isolation valves are operated via a single lever. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1015 Filling Loop

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Orkli logoon valve body, production date and hour (DD/MM/YY hh:mm) printed on ball valve body; CR, flow arrow, Orkli logo on double check valve body

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

9E26009

Approval Holder:

Orkli S. Coop

Company Name

Orkli S. Coop

Address

Ctra. Zaldibia, s/n Ordizia

Postcode

20240

Country

Spain

Phone

+34 610 146 459

General Email

iangulo@orkli.es

View All Listings by this Company

‘BF’ range of Brass compression fittings for use with copper pipe manufactured to EN1057 Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250602019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

IDC logo (E) and Size on body. EN 1254-2 and Size on Nut

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

BF range comprising of models: BF34821 ¾” Compression x ½” Compression BF34831 1” Compression x 1/2" Compression BF34832 1” Compression x ¾” Compression BF3101 ½” Compression BF3102 ¾” Compression BF3103 1” Compression BF31021 ¾” Compression x ½” Compression BF31032 1” Compression x 1/2" Compression BF31031 1” Compression x ¾” Compression BF3111 ½” BSP (M) x ½” Compression BF31112 ½” BSP (M) x ¾” Compression BF3112 ¾” BSP (M) x ¾” Compression BF31121 ¾” BSP (M) x ½” Compression BF31123 ¾” BSP (M) x 1” Compression BF3113 1” BSP (M) x 1” Compression BF31132 1” BSP (M) x ¾” Compression BF3121 ½” BSP (F) x ½” Compression BF31212 ½” BSP (F) x ¾” Compression BF3122 ¾” BSP (F) x ¾” Compression BF31221 ¾” BSP (F) x ½” Compression BF31223 ¾” BSP (F) x 1” Compression BF3123 1” BSP (F) x 1” Compression BF31232 1” BSP (F) x ¾” Compression BF3141 ½” Compression x 1/2"swivel F BF3271 ½” Compression x 1/2"swivel F BF3151 ½” Compression BF3152 ¾” Compression BF3153 1” Compression BF31521 ¾” Compression x 1/2" Compression BF31532 1" Compression x ¾” Compression BF3161 ½” BSP (M) x ½” Compression BF31612 ½” BSP (M) x ¾” Compression BF3162 ¾” BSP (M) x ¾” Compression BF31621 ¾” BSP (M) x ½” Compression BF31623 ¾” BSP (M) x 1” Compression BF3163 1” BSP (M) x 1” Compression BF31632 1” BSP (M) x ¾” Compression BF3171 ½” BSP (M) x ½” Compression BF31712 ½” BSP (M) x ¾” Compression BF3172 ¾” BSP (M) x ¾” Compression BF31721 ¾” BSP (M) x ½” Compression BF31723 ¾” BSP (M) x 1” Compression BF3173 1” BSP (M) x 1” Compression BF31732 1” BSP (M) x ¾” Compression BF3181 1/2" Compression BF3182 ¾” Compression BF3183 1" Compression BF320222 ¾” BSP (M) x ¾” Compression x ¾” Compression BF320333 1” BSP (M) x 1” Compression x 1” Compression BF318112 1/2" Compression x 1/2" Compression x ¾” Compression BF318211 ¾” Compression x 1/2" Compression x 1/2" Compression BF318212 ¾” Compression x 1/2" Compression x ¾” Compression BF318221 ¾” Compression x ¾” Compression x 1/2" Compression BF318223 ¾” Compression x ¾” Compression x 1" Compression BF318311 1" Compression x 1/2" Compression x 1/2" Compression BF318313 1" Compression x ½” Compression x 1" Compression BF318322 1" Compression x ¾” Compression x ¾” Compression BF318323 1" Compression x ¾” Compression x 1" Compression BF318331 1" Compression x 1" Compression x 1/2" Compression BF318332 1" Compression x 1" Compression x ¾” Compression BF3301 ½” Compression x ½” Compression x ½” BSP (F) BF3302 ¾” Compression x ¾” Compression x ¾” BSP (F) BF330221 ¾” Compression x ¾” Compression x ½” BSP (F) BF3303 1” Compression x 1” Compression x 1” BSP (F) BF330331 1” Compression x 1” Compression x ½” BSP (F) BF330332 1” Compression x 1” Compression x ¾” BSP (F) BF3402 ¾” BSP (M) x F COMPRESSION BF3403 1” BSP (M) x F COMPRESSION BF3211 ½” Compression x ½” BSP (F) BF3212 ¾” Compression x ¾” BSP (F) BF 32112 ¾” Compression x ½” BSP (F) BF3501 ½” Compression BF3502 ¾” Compression BF3503 1” Compression BF3511 ½” Compression BF3512 ¾” Compression BF3513 1" Compression

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of compression fittings incorporating polypropylene bodies, plastic pipe liners, plastic grip rings and EPDM seals. For use with PE100 pipe manufactured to BS EN 12201. Maximum working pressure: 16Bar. Maximum operating temperature: 23°C

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250702043

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Compression: 20mm, 25mm, 32mm and 75mm sizes only are approved. Threaded ½” - 2 ½” BSP (M & F).

Marking:

Poliext, Size and pressure on nut.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

627_01 Couplings, 627_05 Female Couplings, 627_12 Male Couplings, 627_19 Elbows, 627_23 Female Elbows, 627_28 Male Elbows, 627_32 End Plugs, 627_36 Reducing Couplings, 627_39 Tee Couplings, 627_43 Tee Coupling Females, 627_49 Tee Coupling Males.

Approval Holder:

Poliext Kft

Company Name

Poliext Kft

Address

Matkó tanya 232, Kecskemét

Country

Hungary

View All Listings by this Company

Range of Victaulic rigid couplings (905, H10, H11, H20, H50) for use with plain end HDPE pipe (EN 12201-2), and for product 907, for use with EN 12201-2 HDPE and EN 10217-1 steel pipe. For above and below ground use. Maximum working pressure: SDR7.4 25bar, SDR11 16bar or SDR17 10bar. Maximum operating temperature: Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250702013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For H10, H11, H20 and H50, sizes 75, 140, 225mm not available in SDR7.4.

Size:

See Models below.

Marking:

Victaulic and size on fitting.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

905 Style 905 Coupling 63mm – 315mm Rigid Coupling, 907 Style 907 Transition Coupling 63mm x DN50 - 280mm x DN250 Rigid Coupling H10, HDPE 90° Elbow 63mm – 225mm Rigid Coupling, H11, HDPE 45° Elbow 63mm – 225mm Rigid Coupling, H20, HDPE Straight Tee 63mm – 225mm Rigid Coupling, H50, HDPE Concentric Reducer 90mm x 63mm – 160mm x 110 mm Rigid Coupling.

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Range of metric and imperial PVC-U Solvent cement or Threaded fittings for use with PVC-U pressure pipe Class E manufacture to BS EN 1452 Maximum working pressure; 16 Bar Maximum operating temperature; Cold water only

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250702042

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Omega, Size, pressure and material on body

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

PVC Fitting Plain Socket Elbow 90° PFPGOI0200 20 mm SC PFPGOI0250 25 mm SC PFPGOI0320 32 mm SC PFPGOI0400 40 mm SC PFPGOI0500 50 mm SC PVC Fitting Plain TEE 90° PFPTII0200 20 mm SC PFPTII0250 25 mm SC PFPTII0320 32 mm SC PFPTII0400 40 mm SC PFPTII0500 50 mm SC PVC Fitting Plain Elbow 45° PFPGYI0200 20 mm SC PFPGYI0250 25 mm SC PFPGYI0320 32 mm SC PFPGYI0400 40 mm SC PFPGYI0500 50 mm SC PVC Fitting Plain Socket (Metric) PFPMAI0200 20 mm SC PFPMAI0250 25 mm SC PFPMAI0320 32 mm SC PFPMAI0400 40 mm SC PFPMAI0500 50 mm SC PFPMAI0630 63 mm SC PFPMAI0750 75 mm SC PFPMAI0900 90 mm SC PFPMAI1100 110 mm SC PVC Fitting Reducing Piece (M/F) PFPMRI032B 25mm SC x 32mm SC x 20mm SC PFPMRI040B 32mm SC x 40mm SC x 20mm SC PFPMRI040C 32mm SC x 40mm SC x 25mm SC PFPMRI050B 40mm SC x 50mm SC x 20mm SC PFPMRI050C 40mm SC x 50mm SC x 25mm SC PFPMRI050D 40mm SC x 50mm SC x 32mm SC PVC Fitting Plain Reducing Tee 90° (Metric) PFPTRI032B 32mm SC x 20mm SC PFPTRI032C 32mm SC x 25mm SC PFPTRI050B 50mm SC x 20mm SC PFPTRI050C 50mm SC x 25mm SC PFPTRI050D 50mm SC x 32mm SC PVC Fitting Plain Serrated Stub Flange (Metric) PFPQRI0250 25 mm SC PFPQRI0320 32 mm SC PFPQRI0400 40 mm SC PFPQRI0500 50 mm SC PVC Fitting Plain Reducing Bush (Metric) PFPRCI025B 25mm SC x 20mm SC PFPRCI032B 32mm SC x 20mm SC PFPRCI032C 32mm SC x 25mm SC PFPRCI040B 40mm SC x 20mm SC PFPRCI040C 40mm SC x 25mm SC PFPRCI040D 40mm SC x 32mm SC PFPRCI050C 50mm SC x 25mm SC PFPRCI050D 50mm SC x 32mm SC PFPRCI050E 50mm SC x 40mm SC PVC Fitting Plain Cap (Metric) PFPCAI0200 20 mm SC PFPCAI0250 25 mm SC PFPCAI0320 32 mm SC PFPCAI0400 40 mm SC PFPCAI0500 50 mm SC PVC Fitting Loose Flange PFPFLI0500 50 mm SC PVC Fitting Plain Union with O-Ring PFPBOI0200 20 mm SC PFPBOI0250 25 mm SC PFPBOI0320 32 mm SC PFPBOI0400 40 mm SC PFPBOI0500 50 mm SC PVC Fitting Adaptor Threaded Elbow 90° PFTGOF0200 ½˝ PFTGOF0250 ¾˝ PFTGOF0320 1˝ PFTGOF0400 1¼˝ PFTGOF0500 1½˝ PVC Fitting Threaded Elbow 45° (Imperial) PFTGYF0500 1½˝ PVC Fitting Threaded 90° Tee Female BSP PFTTIF0200 ½˝ PFTTIF0250 ¾˝ PFTTIF0320 1˝ PFTTIF0400 1¼˝ PFTTIF0500 1½˝ PVC Fitting Reducer Male/Female PFTRIF025B ¾˝ x ½˝ PFTRIF032B 1” BSP x ½˝ PFTRIF032C 1” BSP x ¾˝ PFTRIF050D 1½” BSPx1” BSP PVC Fitting Adaptor Union Threaded BSP (F/M) PFTBOF0200 ½˝ PFTBOF0250 ¾˝ PFTBOF0320 1” BSP PFTBOF0400 1¼” BSP PFTBOF0500 1½˝ PVC Fitting Threaded Socket Female BSP PFTMAF0200 ½˝ PFTMAF0250 ¾˝ PFTMAF0320 1” BSP PFTMAF0400 1¼” BSP PFTMAF0500 1½˝ PVC Fitting Threaded Nipple Male BSP PFTNIF0200 ½˝ PFTNIF0250 ¾˝ PFTNIF0320 1” BSP PFTNIF0400 1¼” BSP PFTNIF0500 1½˝ PVC Fitting Cap Threaded PFTCAF0200 ½˝ PFTCAF0250 ¾˝ PFTCAF0320 1” BSP PFTCAF0400 1¼” BSP PFTCAF0500 1½˝ PVC Fitting 90O Elbow Plain Threaded PFAGOR020B 20 mm SC x½˝ PFAGOR025C 25mm SC x¾˝ PFAGOR032D 32mm SC x1” BSP PFAGOR040E 40mm SC x1¼” BSP PFAGOR050F 50mm SC x1½˝ PVC Fitting Adaptor 90° Tee Plain to BSP PFATIR020B 20 mm SC X½˝ PFATIR025C 25mm SC x¾˝ PFATIR032D 32mm SC x1” BSP PFATIR040E 40 mm SC x 1¼” BSP PFATIR050F 50mm SC x1½˝ PVC Fitting 90O Tee Reduced Plain Threaded PFATRIR032C 32 mm SC x ¾” BSP PFATRIR050B 50 mm SC x ½” BSP PFATRIR050D 50 mm SC x 1” BSP PVC Fitting Male Adaptor PFAAMR020B 20x 25mm SC x½” BSP PFAAMR025B 25mm SC x 32mm SC x½” BSP PFAAMR025C 25mm SC x 32mm SC x¾” BSP PFAAMR025D 25mm SC x 32mm SC x1” BSP PFAAMR032C 32mm SC x 40mm SC x¾” BSP PFAAMR032D 32mm SC x 40mm SC x1” BSP PFAAMR040E 40mm SC x 50mm SC x1¼” BSP PFAAMR040F 40mm SC x 50mm SC x1½” BSP PFAAMR050F 50mm SC x 63mm SC x1½” BSP PFAAMR050G 50mm SC x 63mm SC x2” BSP PVC Fitting Adaptor Reducing Bush PFARCC032B 32 mm SC x ½” BSP PFARCC032C 32 mm SC x ¾” BSP PFARCC040D 40mm SC x1” BSP PFARCC050E 50mm SC x1¼” BSP PVC Fitting Female Adaptor PFAMAR020B 20 mm SC X½” BSP PFAMAR025C 25mm SC x¾” BSP PFAMAR040E 40mm SC x1¼” BSP PFAMAR050F 50mm SC x1½” BSP PVC Fitting Union with O-Ring Plain Threaded PFABOR020B 20 mm SC X½” BSP PFABOR025C 25mm SC x¾” BSP PFABOR032D 32mm SC x1” BSP PFABOR040E 40mm SC x1¼” BSP PFABOR050F 50mm SC x1½” BSP PVC Fitting Plain Socket 90o Elbow PFPGOP0200 ½” PFPGOP0250 ¾” PFPGOP0320 1” PFPGOP0400 1¼” PFPGOP0500 1½” PVC Fitting Plain Socket 45o Elbow PFPGYP0200 ½” PFPGYP0250 ¾” PFPGYP0320 1” PFPGYP0400 1¼” PFPGYP0500 1½” PVC Fitting Plain 90o Tee (Imperial) PFPTIP0200 ½” PFPTIP0250 ¾” PFPTIP0320 1” PFPTIP0400 1¼” PFPTIP0500 1½” PVC Fitting Socket PFPMAP0200 ½” PFPMAP0250 ¾” PFPMAP0320 1” PFPMAP0400 1¼” PFPMAP0500 1½” PVC Reducing Bush PFPRCP025B ¾” x ½” PFPRCP032B 1” x ½” PFPRCP032C 1” x ¾” PFPRCP040D 1¼” x1” PFPRCP050C 1½” x¾” PFPRCP050D 1½” x1” PFPRCP050E 1½” x1¼” PVC Fitting 90o Tee Reducing PFPTRP032B 1” x ½” PFPTRP032C 1” x ¾” PFPTRP050D 1½” x1” PVC Fitting Stub Flange PFPQRP0200 ½” PFPQRP0250 ¾” PFPQRP0320 1” PFPQRP0400 1¼” PFPQRP0500 1½” PVC Fitting Plain Cap PFPCAP0200 ½” BSP PFPCAP0250 ¾” BSP PFPCAP0320 1” BSP PFPCAP0400 1¼” BSP PFPCAP0500 1½” BSP PVC Fitting Union with O-Ring PFPBOP0200 ½” BSP PFPBOP0250 ¾” BSP PFPBOP0320 1” BSP PFPBOP0400 1¼” BSP PFPBOP0500 1½” BSP PVC Fitting Adaptor Plain/Threaded 90o Elbow All Threaded BSP PFAGOC020B ½” BSP x ½” BSP PFAGOC025C ¾” BSP x ¾” BSP PFAGOC032D 1” BSP x 1” BSP PFAGOC040E 1¼” BSPx 1¼” BSP PFAGOC050F 1½” BSPx 1½” BSP PVC Fitting Female Adaptor PFAMAC0200 ½” BSPx½” BSP PFAMAC0250 ¾” BSPx¾” BSP PFAMAC0320 1” BSPX1” BSP PFAMAC0400 1¼” BSPx1¼” BSP PFAMAC0500 1½” BSPx1½” BSP PVC Fitting Tee Plain/Threaded PFATICR020B ½” BSPx½” BSP PFATICR025C ¾” BSPx¾” BSP PFATICR032D 1” BSPX1” BSP PFATICR040E 1¼” BSPx1¼” BSP PFATICR050F 1½” BSPx1½” BSP PVC Fitting Male Threaded Adaptor PFAAMC0200 ½” BSPx¾” BSPx½” BSP PFAAMC0250 ¾” BSPx1” BSPx¾” BSP PFAAMC0320 1” BSPx1¼” BSPx1” BSP PFAAMC0400 1¼” BSPx1½” BSPx1½” BSP PFAAMC050F 1½” BSPx2” BSPx1½” BSP PVC Fitting Adaptor Socket PFAMAB020B 20 mm SC x½” BSP PFAMAB025C 25mm SC x¾” BSP PFAMAB032D 32mm SC x1” BSP PFAMAB040E 40mm SC x1¼” BSP PFAMAB050F 50mm SC x1½” BSP PVC Fitting Tee Reducer PFATRF032B 1” x ½” PFATRF032C 1” x ¾” PFATRF050B 1½” x1½” PFATRF050C 1½” x¾” PVC Fitting Union with O-Ring Plain Threaded PFABOC0200 ½” BSP x ½” BSP PFABOC0250 ¾” BSP x ¾” BSP PFABOC0320 1” BSP x 1” BSP PFABOC0400 1¼” BSP x 1¼” BSP PFABOC0500 1½” BSP x 1½” BSP PVC Fitting Union with O-Ring Plain (Metric/Imp.) PFABOB0200 20 mm SC x ½” BSP PFABOB0250 25 mm SC x ¾” BSP PFABOB0320 32 mm SC x 1” BSP PFABOB0400 40 mm SC x 1¼” BSP PFABOB0500 50 mm SC x 1½” BSP PVC Fitting Union F/M with O-Ring Plain/ Threaded PFABOCM050F 1½” BSP x 1½” BSP PVC Fitting Union F/M with O-Ring Plain/ Threaded PFABORM050F 50mm x 1½” BSP

Approval Holder:

PPFV Ltd.

Company Name

PPFV Ltd.

Address

6 Cedar Trade Park, Cobham Road Ferndown Industrial Estate, Wimbourne, Dorset

Postcode

BH21 7SD

View All Listings by this Company

Manufacturer:

Niesco For Modern Water Systems Production

Company Name

Niesco For Modern Water Systems Production

Address

Industrial District Six, Piece 69, 71, Badr City, Cairo

Country

Egypt

View All Listings by this Company