Fluidfit range of hose barb fittings/stem fittings with push fit connections. Also with EPDM ‘O’-rings. 12 & 15mm models are for use with LLDPE pipe, 22mm models are for use with PEX pipe. Cold water use only Maximum working pressure 10.0 Bar

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2009023

Size:

12mm push fit X barbed crimp connection 15mm push fit X barbed crimp connection 22mm push fit X barbed crimp connection

Marking:

CDC and size on collet

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

HCBB 1210 (12mm) HCBB 15-1/2 (15mm) HCBB 22-1/2 (15mm) HCBB 22-3/4 (15mm)

Approval Holder:

CDC Pneumatics Corp.

Company Name

CDC Pneumatics Corp.

Address

30, 1-Gil, Secheon-no, Dasa-eup, Dalseong-gun, Daegu (Saecheon-ri) 42921

Country

South Korea

Phone

+82 533547501

General Email

sales@cdcpneumatics.com

View All Listings by this Company

Manufacturer:

CDC Pneumatics Corp.

Company Name

CDC Pneumatics Corp.

Address

30, 1-Gil, Secheon-no, Dasa-eup, Dalseong-gun, Daegu (Saecheon-ri) 42921

Country

South Korea

Phone

+82 533547501

General Email

sales@cdcpneumatics.com

View All Listings by this Company

“Plimat ABS Fittings BS Inch and ABS Adaptor Fittings” range of ABS solvent cement or threaded fittings for use with “Plimat ABS pipe”. Maximum working pressure: 15.0 bar (fittings with ½” - 4” solvent cement connections), 9.0 bar (fittings with 5” or 6” solvent cement connections, with or without threaded connecitons), and 10.0 bar (fittings with threaded connections and ½” - 4” solvent cement connections). Cold water and above ground use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2009338

Size:

See model

Marking:

Plimat, size and material on shoulder of fitting. Plimate, size, ABS class, pressure rating, BS5391 and line no. on pipe.

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

Elbow 90° Plain Inch: ½” ABSGOP0200, ¾” ABSGOP0250, 1” ABSGOP0320, 1¼” ABSGOP0400, 1½” ABSGOP0500, 2” ABSGOP0630, 2½” ABSGOP0750, 3” ABSGOP0900, 4” ABSGOP1100, 5” ABSGOP1400, 6” ABSGOP1600. Elbow 45° Plain Inch: ½” ABSGYP0200, ¾” ABSGYP0250, 1” ABSGYP0320, 1¼” ABSGYP0400, 1½” ABSGYP0500, 2” ABSGYP0630, 2½” ABSGYP0750, 3” ABSGYP0900, 4” ABSGYP1100, 5” ABSGYP1400, 6” ABSGYP1600. Socket Plain Inch: ½” ABSMAP0200, ¾” ABSMAP0250, 1” ABSMAP0320, 1¼” ABSMAP0400, 1½” ABSMAP0500, 2” ABSMAP0630, 2½” ABSMAP0750, 3” ABSMAP0900, 4” ABSMAP1100, 5” ABSMAP1400, 6” ABSMAP1600. Tee Plain Inch: ½” ABSTIP0200, ¾” ABSTIP0250, 1” ABSTIP0320, 1¼” ABSTIP0400, 1½” ABSTIP0500, 2” ABSTIP0630, 2½” ABSTIP0750, 3” ABSTIP0900, 4” ABSTIP1100, 5” ABSTIP1400, 6” ABSTIP1600. Cap Plain Inch: ½” ABSCAP0200, ¾” ABSCAP0250, 1” ABSCAP0320, 1¼” ABSCAP0400, 1½” ABSCAP0500, 2” ABSCAP0630, 2½” ABSCAP0750, 3” ABSCAP0900, 4” ABSCAP1100, 6” ABSCAP1600. Bend 90° Plain Inch: ½” ABSCUP0200, ¾” ABSCUP0250, 1” ABSCUP0320, 1¼” ABSCUP0400, 1½” ABSCUP0500, 2” ABSCUP0630, 2½” ABSCUP0750, 3” ABSCUP0900, 4” ABSCUP1100. Union Plain Inch: ½” ABSBOP0200, ¾” ABSBOP0250, 1” ABSBOP0320, 1¼” ABSBOP0400, 1½” ABSBOP0500, 2” ABSBOP0630, 2½” ABSBOP0750, 3” ABSBOP0900, 4” ABSBOP1100. Reducer Plain Inch: ¾” x ½” ABSRCP025B, 1” x ½” ABSRCP032B, 1” x ¾” ABSRCP032C, 1¼” x 1” ABSRCP040D, 1½” x ¾” ABSRCP050C, 1½” x 1” ABSRCP050D, 1½” x 1¼” ABSRCP050E, 2” x 1” ABSRCP063D, 2” x 1¼” ABSRCP063E, 2” x 1½” ABSRCP063F, 2½” x 1½” ABSRCP075F, 2½” x 2” ABSRCP075G, 3” x 1½” ABSRCP090F, 3” x 2” ABSRCP090G, 3” x 2½” ABSRCP090H, 4” x 2” ABSRCP110G, 4” x 3” ABSRCP110I, 5” x 4” ABSRCP140L, 6” x 4” ABSRCP160L. Stub Flange Plain Inch: 1” ABSQRP0320, 1¼” ABSQRP0400, 1½” ABSQRP0500, 2” ABSQRP0630, 2½” ABSQRP0750, 3” ABSQRP0900, 4” ABSQRP1100, 5” ABSQRP1400, 6” ABSQRP1600. Full Faced Flange Plain Inch: ½” ABSFNP0200, ¾” ABSFNP0250, 1” ABSFNP0320, 1¼” ABSFNP0400, 1½” ABSFNP0500, 2” ABSFNP0630, 2½” ABSFNP0750, 3” ABSFNP0900, 4” ABSFNP1100. Blanking Flange Plain Inch: ½” ABSFCP0200, ¾” ABSFCP0250, 1” ABSFCP0320, 1¼” ABSFCP0400, 1½” ABSFCP0500, 2” ABSFCP0630, 2½” ABSFCP0750, 3” ABSFCP0900, 4” ABSFCP1100, 6” ABSFCP1600. Elbow 90° Plain - Female Threaded BSP: ½” ABSGOC0200, ¾” ABSGOC0250, 1” ABSGOC0320, 1¼” ABSGOC0400, 1½” ABSGOC0500, 2” ABSGOC0630, 3” ABSGOC0900. Tee Plain - Female Threaded BSP: ½” ABSTIC0200, ¾” ABSTIC0250, 1” ABSTIC0320, 1¼” ABSTIC0400, 1½” ABSTIC0500, 2” ABSTIC0630, 3” ABSTIC0900. Socket Plain - Female Threaded BSP: ½” ABSMAC0200, ¾” ABSMAC0250, 1” ABSMAC0320, 1¼” ABSMAC0400, 1½” ABSMAC0500, 2” ABSMAC0630, 3” ABSMAC0900, 4” ABSMAC1100. Socket Plain - Male Threaded BSP: ½” ABSAMC0200, ¾” ABSAMC0250, 1” ABSAMC0320, 1¼” ABSAMC0400, 1½” ABSAMC0500, 2” ABSAMC0630, 3” ABSAMC0900, 4” ABSAMC1100. Male Spigot Plain - Female Threaded BSP: ½” ABSAFC0200, ¾” ABSAFC0250, 1” ABSAFC0320, 1¼” ABSAFC0400, 1½” ABSAFC0500, 2” ABSAFC0630. Reducing Bush Plain Male - Female Threaded BSP: ½” x ⅜” ABSRCC020A, ¾” x ½” ABSRCC025B, 1” x ¾” ABSRCC032C. Composite Union Plain Female - Female Brass Threaded BSP: ½” ABSBFC0200, ¾” ABSBFC0250, 1” ABSBFC0320, 1¼” ABSBFC0400, 1½” ABSBFC0500, 2” ABSBFC0630, 2½” ABSBFC0750, 3” ABSBFC0900. Composite Union Plain Female - Male Brass Threaded BSP: ½” ABSBMC0200, ¾” ABSBMC0250, 1” ABSBMC0320, 1¼” ABSBMC0400, 1½” ABSBMC0500, 2” ABSBMC0630, 2½” ABSBMC0750, 3” ABSBMC0900. Tank Connector Plain - Male Threaded BSP: ½” ABSTCC0200, ¾” ABSTCC0250, 1” ABSTCC0320, 1¼” ABSTCC0400, 1½” ABSTCC0500, 2” ABSTCC0630, 2½” ABSTCC0750, 3” ABSTCC0900, 4” ABSTCC1100. Barrel Nipple Plain - Male Threaded BSP: ⅜” ABSBNC0160, ½” ABSBNC0200, ¾” ABSBNC0250, 1” ABSBNC0320, 1¼” ABSBNC0400, 1½” ABSBNC0500, 2” ABSBNC0630, 2½” ABSBNC0750, 3” ABSBNC0900, 4” ABSBNC1100. Barrel Nipple Threaded BSP: ½” ABSBAF0200, ¾” ABSBAF0250, 1” ABSBAF0320, 1¼” ABSBAF0400, 1½” ABSBAF0500, 2” ABSBAF0630, 2½” ABSBAF0750, 3” ABSBAF0900, 4” ABSBAF1100. Back Nuts Threaded BSP: ½” ABSNUF0200, ¾” ABSNUF0250, 1” ABSNUF0320, 1¼” ABSNUF0400, 1½” ABSNUF0500, 2” ABSNUF0630, 2½” ABSNUF0750, 3” ABSNUF0900, 4” ABSNUF1100. Pipe 9 bar: 1” ABSCLC0320, 1¼” ABSCLC0400, 1½” ABSCLC0500, 2” ABSCLC0630, 2½” ABSCLC0750, 3” ABSCLC0900, 4” ABSCLC1100, 6” ABSCLC1600. Pipe 15 Bar: ½” ABSCLE0200, ¾” ABSCLE0250, 1” ABSCLE0320, 1¼” ABSCLE0400, 1½” ABSCLE0500, 2” ABSCLE0630, 3” ABSCLE0900, 4” ABSCLE1100.

Approval Holder:

Plimat (UK) Ltd

Company Name

Plimat (UK) Ltd

Address

Unit 7, Newmans Copse Road, Hounsdown Business Park, Totton, Southampton

Postcode

SO40 9LX

Phone

0845 055 9022

View All Listings by this Company

Range of dual flush WC syphons incorporating a polypropylene body, stainless steel C link and a LDPE sealing washer. The valve is to be operated via a handle lever. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2009027

Size:

1 1/2”

Marking:

Opella and Opella logo on top of body

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

DFA075XX-7½" Dual Flush Syphon. XX denotes the 'C' link size i.e. DFA07525 has 2½" 'C' link DFA080XX-8" Dual Flush Syphon DFA085XX-8½" Dual Flush Syphon DFA090XX-9" Dual Flush Syphon DFA095XX-9½" Dual Flush Syphon

Product Images

Approval Holder:

Fluidmaster, Inc.

Company Name

Fluidmaster, Inc.

Address

30800 Rancho Viejo Road San Juan Capistrano

Postcode

CA 92675

Country

United States

Phone

1-949-796-2653

General Email

jloera@fluidmaster.com

View All Listings by this Company

Manufacturer:

Fluidmaster, Inc.

Company Name

Fluidmaster, Inc.

Address

30800 Rancho Viejo Road San Juan Capistrano

Postcode

CA 92675

Country

United States

Phone

1-949-796-2653

General Email

jloera@fluidmaster.com

View All Listings by this Company

Range of stainless steel plate heat exchangers. The product incorporates a stub pipe with a ½” BSP (F) end connection on the secondary flow (outlet) which can accommodate a control sensor and strap on limit thermostat, (neither of which are supplied or considered part of the approval listing). Maximum working pressure 10.0 bar. Maximum working temperature 85°C.

Section:

1350 Heat Exchangers

Size:

Primary circuit: 1½” BSP (M) inlet and outlet. Secondary circuit: 1½” BSP (M) inlet and outlet.

Marking:

Ormandy Rycroft Engineering, model, serial no., design pressure, temperature & test pressure on adhesive label on end plate.

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

Core - Breeze S (4-86 plates).

Product Images

Approval Holder:

Maloney Metalcraft (trading as Ormandy Rycroft Engineering)

Company Name

Maloney Metalcraft (trading as Ormandy Rycroft Engineering)

View All Listings by this Company

Manufacturer:

Maloney Metalcraft (trading as Ormandy Rycroft Engineering)

Company Name

Maloney Metalcraft (trading as Ormandy Rycroft Engineering)

View All Listings by this Company

Range of indirect heat interface units providing heating and instantaneous hot water. The hot water and space heating is provided via two separate plate heat exchangers. The space heating circuit incorporates an expansion vessel and expansion relief valve (set @ 3.0 bar). The primary circuit only is supplied with isolation valves on the flow and return. Maximum working pressure primary 16.0 bar. Maximum working pressure space heating 2.5 bar. Maximum working pressure secondary hot water (DHW) 10.0 bar. Maximum operating temperature primary 75°C. Maximum operating temperature space heating 85°C. Maximum operating temperature secondary hot water (DHW) 65°C.

Section:

1350 Heat Exchangers

WRAS Approval Number:

2009331

Note:

Not supplied with a temporary filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.

Size:

Primary: 1” BSP (M). Secondary: ¾” BSP (M). DHW: ½” BSP (M).

Marking:

Caleffi on cover. Pressure, model, temperature and other technical information on inside cover.

Installation Requirements:

R001 R360

Expiry date:

30/09/2025

Model:

SATK30105 - 75kW - Indirect HIU. SATK30103 - 50kW - Indirect HIU.

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company