Directory Search Results

Print List

#241004741

Range of UV disinfection units with stainless steel bodies and quartz tube. Maximum working pressure 8.0 bar. Cold water use only.

Section:
2411 Disinfection Equipment
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
9.5mm Spigot. ¾” Male BSP & 1” Male BSP.
Marking:
BWT & logo AQApure on body
Installation Requirements:
R001 R150 R170
Expiry date:
31/10/2029
Model:
AQApure SE15 AQApure SE30 AQApure SE55
Product Images

Approval Holder:
BWT UK Ltd
Company Name
BWT UK Ltd
Address
The Gateway Centre Cressex Business Park High Wycombe
Postcode
HP12 3SU
Country
United Kingdom

View All Listings by this Company

Print This Approval


#250855022

'Ecocoat FBE Green Powder PFC/6018 (RAL 6018)& Ecocoat FBE Red Oxide Powder PFC/3000-Red Oxide'. Factory applied, green or red coloured epoxy coatings. Apply as per manufacturer’s Product Data Sheet revised ‘1st Jan, 2024’. Cure for 3 minutes at a metal temperature of 230°C. For use with water up to 85°C. These materials are only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
250855022
Expiry date:
31/08/2030

Approval Holder:
Par Ferro Coatings Pvt. Ltd.
Company Name
Par Ferro Coatings Pvt. Ltd.
Address
129, Matheswartala Road, Kolkata - 700046, West Bengal
Country
India

View All Listings by this Company

Print This Approval


#250855034

'Belzona 1111 (Super Metal)'. Grey coloured, site applied, two-component epoxy coating. Mix Part A (dark grey, opaque paste) with Part B (light grey, opaque paste) in a 5:1 weight ratio and apply as per manufacturers IFU ’02-07-23’. Cure for 1 day@30°C or 5 days at 5 °C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5042 Coatings, Paints & Linings
Section Subtitle:
Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:
250855034
Expiry date:
31/08/2030

Approval Holder:
Belzona Limited
Company Name
Belzona Limited
Address
Claro Road, Harrogate, Yorks.
Postcode
HG1 4AY
Phone
+44 1423 567641 Fax: 01423 505967

View All Listings by this Company

Print This Approval


#250855035

'Belzona 1331'. Grey coloured, site applied, two-component epoxy coating. First coat: Mix Belzona 1331 (white, opaque paste) parts A & B in a weight ratio of 2.2:1 and apply as per manufacturer’s IFU ’06-03-19’. Cure for 6-8 hours@10°C or 3-4 hours@30°C then apply: Second coat: Mix Belzona 1331 (grey, opaque paste) parts A & B in a weight ratio of 2.2:1 and apply as per manufacturer’s IFU ’06-03-19’. Cure in accordance with manufacturer’s IFU ’06-03-19’, ‘Completion of the Molecular Reaction’ table, ‘Full mechanical/thermal loading or water immersion’. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5042 Coatings, Paints & Linings
Section Subtitle:
Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:
250855035
Expiry date:
31/08/2030

Approval Holder:
Belzona Limited
Company Name
Belzona Limited
Address
Claro Road, Harrogate, Yorks.
Postcode
HG1 4AY
Phone
+44 1423 567641 Fax: 01423 505967

View All Listings by this Company

Print This Approval


#250855036

'Belzona 5811DW2 (grey)'. Grey coloured, site applied, two-component epoxy coating. Mix Part A (grey, opaque glossy paste) with Part B (orange, transparent liquid) in a 4:1 mass ratio and apply as per manufacturer’s IFU ’16-03-19’. Cure for 4 days@30°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5042 Coatings, Paints & Linings
Section Subtitle:
Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:
250855036
Expiry date:
31/08/2030

Approval Holder:
Belzona Limited
Company Name
Belzona Limited
Address
Claro Road, Harrogate, Yorks.
Postcode
HG1 4AY
Phone
+44 1423 567641 Fax: 01423 505967

View All Listings by this Company

Print This Approval


#251055014

Grilamid LV-30H FWA natural. Grilamid LV-30H FWA black 9225. Grilamid LV-30H FWA grey 9497. Grilamid LV-43H FWA black 9225. Grilamid LV-50H FWA black 9225. Natural (appear white), black or grey, injection moulded, glass fibre reinforced nylon materials. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
251055014
Expiry date:
31/10/2030

Approval Holder:
EMS-CHEMIE AG
Company Name
EMS-CHEMIE AG
Address
Via Innovativa 1, CH-7013 Domat/Ems
Country
Switzerland
Phone
+41 81 632 78 78
General Email
welcome@emsgrivory.com

View All Listings by this Company

Print This Approval


#250755058

'XS10B & XRC30B'. Black coloured, extruded, Polyethylene materials. For use with water up to 23°C.

Section:
5245 Polyethylene
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250755058
Expiry date:
31/07/2030

Approval Holder:
Hanwha Total Petrochemical
Company Name
Hanwha Total Petrochemical
Address
103, Dokgot2-Ro, Daesan-Eup, Seosan-Si, ChungNam, 31900
Country
Korea, Republic of

View All Listings by this Company

Print This Approval


#250908901

Section:
0531 Combination Tap Assemblies
Description:
A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)
Wall Mounted Undefinable Air Gap - See IRN's
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
TVT103002000xxxx1/2" BSP M10 bar60 °CVilleroy and Boch logohandleNoCeramic cartridgeAerator
TVT104001000xxxx1/2" BSP M10 bar60 °CVilleroy and Boch logohandleNoCeramic cartridgeAerator

Notes & Further Information

Where xx denotes the surface finish (which is a non-water contact part) 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite

Product Images

Approval Holder:
In Compliance GmbH
Company Name
In Compliance GmbH
Address
Kathe-Kollwitz-Ring 5a Unna
Postcode
59423
Country
Germany
General Email
jutta.emge-degenhardt@in-compliance.de

View All Listings by this Company

Print This Approval


#250504032

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass) bodies. The flow is controlled via a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a thermostatic cartridge. The products incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets incorporate a stainless-steel strainer. The products are supplied with spherical valves for both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0685 Combination Tap Assembly
Section Subtitle:
Tap(s) with a non-touch method of flow control incorporating temperature control.
WRAS Approval Number:
250504032
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” Male BSP.
Marking:
INTA on operating member. Model number and date (WW/YY) on underside of tap.
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2030
Model:
SF1130CP - WALL MOUNTED REMOVABLE SPOUT TAP (BATTERY OPERATED) SF1129CP - WALL MOUNTED TAP (BATTERY OPERATED)

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 108 of 108

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.