Range of capillary end feed bronze fittings for use with copper tube (manufactured to BS EN 1057). 15mm – 54mm fittings have a maximum working pressure of 25.0 bar. 67mm – 108mm fittings have a maximum working pressure of 16.0 bar. Maximum operating temperature 100°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2105306

Note:

Above ground use only.

Size:

15mm – 108mm.

Marking:

Kembla & size on body.

Installation Requirements:

R001

Expiry date:

31/05/2026

Model:

FEN – Female 90° Elbow 15mm x 1/2” code FEN015 22mm x 1/2” code FEN02215 22mm x 3/4" code FEN022 28mm x 1” code FEN028 MEN – Male 90° Elbow 15mm x 1/2" code MEN015 FTE – Female Tee 22mm x 1/2" code FTE02215 35mm x 3/4" code FTE03522 42mm x 3/4" code FTE04222 42mm x 1” code FTE04228 54mm x 3/4" code FTE05422 54mm x 1” code FTE05428 FCE – Female Cross Tee 35mm x 3/4" code FCE03522 42mm x 3/4" code FCE04222 42mm x 1” code FCE04228 54mm x 3/4” code FCE05422 54mm x 1” code FCE05428 FCC – Female Coupler 15mm x 1/2" code FCC015 22mm x 3/4” code FCC022 28mm x 1” code FCC028 35mm x 1-1/4” code FCC035 42mm x 1-1/2” code FCC042 54mm x 2” code FCC054 67mm x 2-1/2” code FCC067 BTR – Reducing Coupling 22mm x 1/2" code BTR022 MCC – Male Coupler 15mm x 1/2" code MCC015 22mm x 3/4” code MCC022 28mm x 1” code MCC028 35mm x 1-1/4” code MCC035 42mm x 1-1/2” code MCC042 54mm x 2” code MCC054 67mm x 2-1/2” code MCC067 76mm x 3” code MCC076 108mm x 4” code MCC108

Product Images

Approval Holder:

Kembla (HK) Limited

Company Name

Kembla (HK) Limited

Country

China

Phone

+852 2833 9308

General Email

charles.tam@kembla.com.hk

View All Listings by this Company

Range of WC dual flush drop valve with plastic body silicone rubber seal and NBR rubber ‘O’-ring. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2105006

Size:

B4920DSM-U/DHH-U models: 2” U clamp fitting. B4920DSM-G/DHH-G models: 2” BSP (M).

Marking:

Trademark WDI, series number and Eco on valve body.

Installation Requirements:

R001 R571

Expiry date:

31/05/2026

Model:

B4920DSM-U. B4920DSM-G. B4920DHH-U. B4920DHH-G.

Product Images

Approval Holder:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Range of WC dual flush drop valve with plastic body silicone rubber seal and NBR rubber ‘O’-ring. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2105007

Size:

B4910-U/T-U models: 2” U clamp fitting. B4910-G/T-G models: 2” BSP (M).

Marking:

Trademark WDI, series number and Eco on valve body.

Installation Requirements:

R001 R571

Expiry date:

31/05/2026

Model:

B4910-U. B4910-G. B4910T-U. B4910T-G.

Product Images

Approval Holder:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Range of WC dual flush drop valve with plastic body silicone rubber seal and NBR rubber ‘O’-ring. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2105012

Size:

2” BSP (M)

Marking:

Fluidmaster on body. 800 series on platform under operating member.

Installation Requirements:

R001 R571

Expiry date:

31/05/2026

Model:

820WB-FIF-002. 820WB-FIF-003. 820WB-FIF-004. 820F-001. 820F-013. 30082. 25-5151. 25-5151-01. 25-5278. 25-5293

Product Images

Approval Holder:

Fluidmaster, Inc.

Company Name

Fluidmaster, Inc.

Address

30800 Rancho Viejo Road San Juan Capistrano

Postcode

CA 92675

Country

United States

Phone

1-949-796-2653

General Email

jloera@fluidmaster.com

View All Listings by this Company

Manufacturer:

Fluidmaster, Inc.

Company Name

Fluidmaster, Inc.

Address

30800 Rancho Viejo Road San Juan Capistrano

Postcode

CA 92675

Country

United States

Phone

1-949-796-2653

General Email

jloera@fluidmaster.com

View All Listings by this Company

Dual flush, WC outlet valve with internal overflow, operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2104334

Size:

62.12mm ∅

Marking:

Geberit and Type 212 on body

Installation Requirements:

R001 R571

Expiry date:

30/04/2026

Model:

Geberit Type 212 Flush Valve Models added October 2021: Geberit Type 212 Flush Valve – for Omega Cisterns Geberit Type 212 Flush Valve – for Sigma and Delta Cisterns

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company