Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250512018

Range of DZR brass push fit fittings for use with copper pipe (EN1057). Maximum working pressure 10.0 Bar. Maximum operating temperature 65 °C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250512018
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: “IDC” logo & size on body.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: 2PAA014 - Push-fit straight fitting 1/2”(14.7mm), 2PAA021 - Push-fit straight fitting 1/2”(14.7mm), 2PAB014 - Push-fit Elbow fitting 1/2”(14.7mm), 2PAB021 - Push-fit Elbow fitting 3/4”(21mm), 2PAC014 - Push-fit equal Tee fitting 1/2”(14.7mm), 2PAC021 - Push-fit equal Tee fitting 3/4”(21mm), 2PAD014 - Push-fit Stop End 1/2”(14.7mm), 2PAD021 - Push-fit Stop End 3/4”(21mm), 2PAE002 - Push-fit x Male straight adapter 1/2”(14.7mm) x 3/4”M, 2PAA121 - Push-fit Reduce straight adapter 3/4”(21mm) x 1/2”(14.7mm), 2PPA142 - Pushfit Straight Pushfit x Pipe 1/2”(14.7mm) x 3/4”(21mm), 2PAC221 - Push-fit Reduce Tee fitting 3/4”(21mm) x 3/4”(21mm) x 1/2”(14.7mm), 2PAC211 - Push-fit Reduce Tee fitting 3/4”(21mm) x 1/2”(14.7mm) x 1/2”(14.7mm), 2PAC212 - Push-fit Reduce Tee fitting 3/4”(21mm) x 1/2”(14.7mm) x 3/4”(21mm).

Product Images

Approval Holder:: IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company

WRAS Approval Number: #250404705

Range of WC dual flush drop valves with an ABS body and silicone seal. The valves are operated via a push button or lever assembly for either full or reduced flush and incorporate an internal adjustable height overflow. Cold water use only.

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 250404705
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1 ½” BSP (M) & 2” BSP (M)
Marking:: Fluidmaster on body
Installation Requirements:: R001 R556 R571
Expiry date:: 30/04/2030
Model:: PRO550UK: 1½" Base, 350mm Cable, Dual Flush Button, PRO550LC: 1½" Base, 550mm cable, Dual flush button. 550073: 1½" Base + 2 in adaptor, 350 mm button/cable 550074: 1½" Base + 2 in adaptor, 350 mm button/cable- C360101: 1 ½” base + 2 in adaptor, 350 mm button/cable. C360102: 2” Base, 550mm cable, Dual flush button. PRO750UK & 750074: 1½” BSP Male Outlet

Product Images

Approval Holder:: Fluidmaster UK

Company Name
Fluidmaster UK
Address
Twyford Road Rotherwas Industrial Estate Hereford
Postcode
HR2 6JR

View All Listings by this Company
Manufacturer:: BESSTER (XIAMEN) TECHNOLOGY

Company Name
BESSTER (XIAMEN) TECHNOLOGY
Address
9-10 BUILDING, SIMING XIAMEN, FUJIAN
Postcode
361100
Country
China

View All Listings by this Company

WRAS Approval Number: #250415015

Range of electromagnetic water meters with stainless steel bodies and a polyamide coating. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN40-300 flanged.
Marking:: ANSO and Shenzhen ANSO IOT Co.,Ltd registered trademark (English translation: Anxin), model, size, manufacturing time (YY-MM-manufacture code) and other technical information on label on body. Shenzhen ANSO IOT Co.,Ltd registered trademark (English translation: Anxin), size and manufacturing time (YY-MM-manufacture code) on meter face.
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: MAG-AX

Product Images

Approval Holder:: Shenzhen ANSO IOT Co.,Ltd

Company Name
Shenzhen ANSO IOT Co.,Ltd
Address
3203, Block D, Building 1, Lot 1, Chuangzhi Yuncheng, Liuxian Avenue, Xili Community, Xili Street, Nanshan District, Shenzhen
Country
China

View All Listings by this Company
Manufacturer:: Shenzhen ANSO IOT Co.,Ltd

Company Name
Shenzhen ANSO IOT Co.,Ltd
Address
3203, Block D, Building 1, Lot 1, Chuangzhi Yuncheng, Liuxian Avenue, Xili Community, Xili Street, Nanshan District, Shenzhen
Country
China

View All Listings by this Company

WRAS Approval Number: #241002098

Range of water meters with brass bodies, plastic turbines and plastic strainers on inlets. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1/2” BSP (M) inlet x 1/2” BSP (M) outlet for DN15. 3/4” BSP (M) inlet x 3/4” BSP (M) outlet for DN20.
Marking:: BOSS and product info on meter face. Flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: 38410006 - BOSS 35WMC 15MM COLD WATER METER SINGLE JET 38410017 - BOSS 35WMC 20MM COLD WATER METER SINGLE JET 38410028 - BOSS 35WMCP 15MM COLD WATER METER SINGLE JET PULSED 38410039 - BOSS 35WMCP 20MM COLD WATER METER SINGLE JET PULSED 38410168 - BOSS 35WMCB 15MM COLD WATER METER SINGLE JET C/W MBUS 38410179 - BOSS 35WMCB 20MM COLD WATER METER SINGLE JET C/W MBUS 38410508 - BOSS 35WMHP 15MM HOT WATER METER SINGLE JET PULSED 38410519 - BOSS 35WMHP 20MM HOT WATER METER SINGLE JET PULSED 38410648 - BOSS 35WMHB 15MM HOT WATER METER SINGLE JET C/W MBUS 38410659 - BOSS 35WMHB 20MM HOT WATER METER SINGLE JET C/W MBUS 38410286 - BOSS 35WMCW 15MM COLD WATER METER SINGLE JET MBUS WIRELESS 38410297 - BOSS 35WMCW 20MM COLD WATER METER SINGLE JET MBUS WIRELESS 38410393 - BOSS 35WMCB 15MM COLD WATER METER SINGLE JET C/W LORA 38410401 - BOSS 35WMCB 20MM COLD WATER METER SINGLE JET C/W LORA 38410755 - BOSS 35WMHW 15MM HOT WATER METER SINGLE JET MBUS WIRELESS 38410766 - BOSS 35WMHW 20MM HOT WATER METER SINGLE JET MBUS WIRELESS

Approval Holder:: BSS Industrial

Company Name
BSS Industrial
Address
Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

WRAS Approval Number: #250702006

Range of water meters with black nylon bodies. Maximum working pressure 16.0 Bar Maximum operating temperature 50.0°C

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Water meter inlet is classed as 1 1/2" BSP M but product is supplied with a raiser that has 1 1/2" BSP M outlets and 1 1/2" BSP F inlets.
Marking:: Arad and product info on meter face.
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: WATM250001: ¾” POSITIVE DISPLACEMENT WATER METER & WATM250050: 1/2" POSITIVE DISPLACEMENT WATER METER C/W PULSE OP.

Approval Holder:: Reliance Worldwide Corporation

Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company
Manufacturer:: Arad GROUP Ltd.

Company Name
Arad GROUP Ltd.
Address
Kibbutz Dalia 1923900 Kibutzz Dalia
Country
Israel
Phone
+972-4-9897906
General Email
Dars@arad.co.il

View All Listings by this Company

WRAS Approval Number: #250502013

Range of water meters with plastic bodies and turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 bar Maximum operating temperature 50°C

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP M to 1½” BSP M
Marking:: NWM and Technical info on dial face. Flow arrow and DN on body.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: MJ-LFC

Product Images

Approval Holder:: Ningbo Water Meter (Group) Co., Ltd

Company Name
Ningbo Water Meter (Group) Co., Ltd
Address
No 355 Hongxing Road Jiangbei District Ningbo
Country
China

View All Listings by this Company

WRAS Approval Number: #240902719

Ranges of sensor operated flow control devices either mains or battery powered, incorporating a normally closed solenoid valve to control the flow and operated via an infra-red sensor. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8 Bar Maximum operating temperature 65°C

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 10mm Spigot inlet x 1/2" BSP (M) outlet
Marking:: "D" logo & Dolphin on sensor unit.
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: DB6220-aaa-bb/DB6225-aaa-bb DB620-aaa-bb /DB625-aaa-bb DB6210-aaa-bb /DB6215-aaa-bb DB6240-aaa-bb /DB6245-aaa-bb DB6250-aaa-bb /DB6255-aaa-bb DB6280-aaa-bb /DB6285-aaa-bb ‘0’ models (DBxx[x]0-xxx-xx) are 9V mains powered. '5' models (DBxx[x]5-xxx-xx) are 9V battery powered. ‘aaa’ denotes the external surface finish. ‘bb’ denotes the external surface colour.

Approval Holder:: Dolphin Solutions Limited

Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

WRAS Approval Number: #250908704

Brass pressure test point. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¼” BSPT (M)
Marking:: HNH Logo, 85°C WRAS, 120°C
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: Fig 631 Pressure Test Points

Approval Holder:: Hattersley

Company Name
Hattersley
Address
11-15 Epsilon Terrace West Road Ipswich Suffolk
Postcode
IP3 9FJ
Country
United Kingdom
Phone
0766465023
General Email
tturner@cranebsu.com

View All Listings by this Company

WRAS Approval Number: #241202713

Stainless steel pressure transducer. Maximum working pressure 20.0 Bar. Maximum operating temperature 50.0°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Marking:: Applied Measurements labels attached to body
Installation Requirements:: R001
Expiry date:: 31/12/2029
Model:: Pa6INF-20barsg-001.

Product Images

Approval Holder:: SUEZ Advanced Solutions UK Ltd T/A Inflowmatix

Company Name
SUEZ Advanced Solutions UK Ltd T/A Inflowmatix
Address
1 Venture Road Southampton Science Park , Hampshire
Postcode
SO16 7NP
Country
United Kingdom
General Email
brian.head@inflowmatix.com

View All Listings by this Company

WRAS Approval Number: #240902088

Range of ‘Tcontrols’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD
Marking:: "Tcontrols" logo, Model, Voltage, Size and other information on cap.
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:: Thermowatt S.p.A.

Company Name
Thermowatt S.p.A.
Address
Via San Giovanni Battista 21 Arcevia
Postcode
60011
Country
Italy
Phone
+39 0731988246
General Email
thermowatt@legalmail.it

View All Listings by this Company