Directory Search Results

Print List

#2111704

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (either stainless steel or brass bodies in a variety of finishes). Flow is controlled via two solenoid valves (housed in a control box) activated via an infra-red sensor, the inlets to the control box incorporate stainless steel strainers. The temperature is controlled independently via a ceramic cartridge with a dome type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2111704
Size:
Control box: ⅜” BSP (M). Tap: Braided stainless steel braided, PEX lined hoses with 10mm spigot end connections
Marking:
VOLA on operating member
Installation Requirements:
R001 R006 R007 R010
Expiry date:
30/11/2026
Model:
VOLA HV1E-XX Stainless steel. Where XX denotes the surface finish: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 71 = Brushed Dark Copper. VOLA HV1E-XX Brass. Where XX denotes the surface finish: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval


#2110026

A range of wall mounted two hole single outlet (fixed) electronically controlled tap assemblies with brass bodies (various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor on the underside of the tap. The inlets of the function block incorporate stainless steel strainers, plastic silencers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2110026
Note:
The 16 180 180 Axor Basic set is not approved in its own right.
Size:
¾” BSP (F) to basic set
Marking:
AXOR (brand of Hansgrohe SE) on face plate.
Installation Requirements:
R001 R010 R040 R570
Expiry date:
31/10/2026
Model:
Concealed Valve: 16 180 180 Axor Basic set. Which must be installed with one of the following trim sets: 39 117 xxx Axor Citterio with spout 160 mm. 39 118 xxx Axor Citterio with spout 220 mm. 38 119 xxx Axor Uno with spout 165 mm. 38 120 xxx Axor Uno with spout 225 mm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2107901

Range of float operated valves with brass bodies manufactured to BS1212 Part 2 1990. The valves have ½’’ BSP inlets with plastic backnuts, brass or plastic back plates, an up and over type outlet discharge and a brass lever arm. Maximum working pressure 14.0 bar. For use with cold water only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2107901
Note:
Not supplied with a float
Size:
see model
Marking:
The words ‘’Beta BS1212 Part 2’’ is embossed onto the brass body The word ‘’BETA’’ is moulded into the overhead discharge nozzle The word ‘’BETA’’ is embossed or moulded into the front face of the backplate.
Installation Requirements:
R001 R550 R554
Expiry date:
31/07/2026
Model:
DBL201A Side entry ½” BSP 1 ¼” tail - High pressure seat (Brass back plate). DBL201AX Side entry ½” BSP 1 ¼” tail - High pressure seat (Plastic back plate). DBL201B Side entry ½” BSP 2” tail - High pressure seat (Brass back plate). DBL201C Side entry ½” BSP 3” tail - High pressure seat (Brass back plate). DBL251A Side entry ½” BSP 1 ¼” tail - Low pressure seat (Brass back plate). DBL251B Side entry ½” BSP 2” tail - Low pressure seat (Brass back plate). DBL251C Side entry ½” BSP 3” tail - Low pressure seat (Brass back plate). DBL231A Side entry ½” BSP 1 ¼” tail - Medium pressure seat (Brass back plate).

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2107905

Range of float operated valves with plastic bodies and either brass or plastic inlet tails of the side or bottom entry type manufactured to BS1212 Part 3 1990. The valves have ½’’ BSP inlets with plastic backnuts, an up and over type outlet discharge and a plastic operating lever adjusted by a screw & lock nut. Maximum working pressure 14.0 bar. For cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2107905
Note:
Not supplied with a float
Size:
½” BSP side inlet or ½’’ BSP 8” to 10” fixed height pedestal. ½” BSP inlet telescopic (adjustable height 8” to 11½”).
Marking:
The front face of the backplate is marked with the words: ‘’T.DUDLEY BS 1212 PART 3’’ OR ‘’CRONEX BS 1212 PART 3’’ AND ‘’COLD WATER ONLY’’
Installation Requirements:
R001 R280 R550 R554 R560 R562
Expiry date:
31/07/2026
Proviso:
IRN R560 applies to the bottom entry inlet valves only IRN R562 applies to the telescopic inlet valve only
Model:
Beta+ Side entry (plastic tail). Beta+ Side entry (brass tail). Beta+ 8” to 10” Pedestal (plastic tail). Beta+ Telescopic pedestal (brass tail).

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2107908

Range of BS1212 Part 3 1990 float operated valves incorporating plastic bodies of either the side or bottom entry type. Maximum working pressure 14.0 bar. For cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2107908
Note:
Not supplied with a float
Size:
½” BSP Side inlet, ½” BSP Pedestal Bottom Inlet, Heights 8” to 10”
Marking:
‘’T.DUDLEY BS 1212 PART 3’’ OR ‘’CRONEX BS 1212 PART 3’’ AND ‘’COLD WATER ONLY’’
Installation Requirements:
R001 R280 R550 R554 R560
Expiry date:
31/07/2026
Proviso:
IRN R560 applies to the bottom entry inlet valve only
Model:
401, 401E - Side Entry 451, 451E - 8” to 10” Pedestal Bottom Entry

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2112329

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres and incorporates a servicing valve and flexible hose on the inlet supply.The cistern is operated by a pnuematic push button Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112329
Size:
½” BSP (M)
Marking:
Geberit on cistern and inlet valve.
Installation Requirements:
R001 R556
Expiry date:
31/12/2026
Model:
109.103.21.2 109.104.21.2 109.105.00.1 458.118.21.2 458.119.21.2 458.132.00.1 Model added May 2023: 458.145.00.1 Models added March 2024: 458.151.21.1 458.152.21.1

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2204022

Range of Caprice assisted baths which include a choice of with or without a hoist. Flow is controlled via a thermostatic mixing valve supplying the bath spout outlet or shower handset. The discharge from the bath spout and shower handset in via a type AUK 3 airgap, verified by measurement, suitable for Fluid Category 5 backflow protection Maximum working pressure 6.0 bar.

Non-metallic materials and components comply with BS6920 at 46°C

Section:
0055 Bath - Assisted bathing unit(s)
WRAS Approval Number:
2204022
Note:
The inlets to the thermostatic mixing valve incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection, therefore IRN 010 applies.
Size:
Stainless steel braided EPDM lined flexible hose assemblies with 22mm push-fit end connections.
Marking:
Reval, model number, product info on label of leg. Reval on front panel.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2027
Model:
Caprice fixed height bath without hoist 7100.0GS70R – Caprice fixed height bath L/H model 172cm length 7100.0DS70R – Caprice fixed height bath R/H model 172cm length 7100.0GS90R – Caprice fixed height bath L/H model 192cm length 7100.0DS90R – Caprice fixed height bath R/H model 192cm length Caprice variable height bath without hoist 7100.1GS70R – Caprice variable height bath L/H model 172cm length 7100.1DS70R – Caprice variable height bath R/H model 172cm length 7100.1GS90R – Caprice variable height bath L/H model 192cm length 7100.1DS90R – Caprice variable height bath R/H model 192cm length Caprice variable height bath with hoist 7100.1GS71R – Caprice variable height bath with hoist L/H model 172cm length 7100.1DS71R – Caprice variable height bath with hoist R/H model 172cm length 7100.1GS91R – Caprice variable height bath with hoist L/H model 192cm length 7100.1DS91R 0 Caprice variable height bath with hoist R/H model 192cm length

Approval Holder:
Reval Continuing Care Limited
Company Name
Reval Continuing Care Limited
Address
Unit 17 St Theodore’s Way Brynmenyn Business Centre Bridgend
Postcode
CF32 9TZ
Country
United Kingdom
Phone
01656 721001
General Email
lynette@revalcc.com

View All Listings by this Company
Manufacturer:
Reval Continuing Care Limited
Company Name
Reval Continuing Care Limited
Address
Unit 17 St Theodore’s Way Brynmenyn Business Centre Bridgend
Postcode
CF32 9TZ
Country
United Kingdom
Phone
01656 721001
General Email
lynette@revalcc.com

View All Listings by this Company

Print This Approval


#2207356

Half turn ceramic disc headwork with brass body and NBR ‘O’-rings. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
2207356
Size:
18.5mm OD
Marking:
Sedal stamped on body
Installation Requirements:
R001
Expiry date:
31/07/2027
Model:
19MC

Approval Holder:
Kaiping Sedal Tap Components Co., Ltd.
Company Name
Kaiping Sedal Tap Components Co., Ltd.
Address
Floor 1, 3 and Part of Floor 2, No. 2 Neihuan Dong Road, Shuikou Town, Kaiping City, Guangdong Province
Country
China
Phone
+86-750-2728599
General Email
tony@ksedal.com

View All Listings by this Company
Manufacturer:
Kaiping Sedal Tap Components Co., Ltd.
Company Name
Kaiping Sedal Tap Components Co., Ltd.
Address
Floor 1, 3 and Part of Floor 2, No. 2 Neihuan Dong Road, Shuikou Town, Kaiping City, Guangdong Province
Country
China
Phone
+86-750-2728599
General Email
tony@ksedal.com

View All Listings by this Company

Print This Approval


#2109361

Range of single hole, single outlet (fixed) combination tap assemblies incorporating brass bodies (chrome plated) ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2109361
Size:
Stainless-steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connection
Marking:
Vitra on operating member. Date of manufacture (WW/YY) on rear of body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2026
Model:
MINIMAX S A42361VUK Basin mixer (small) MINIMAX S A41984VUK Basin mixer

Approval Holder:
ECZACIBAŞI YAPI GEREÇLERİ SANAYİ VE TİCARET A.Ş
Company Name
ECZACIBAŞI YAPI GEREÇLERİ SANAYİ VE TİCARET A.Ş
Address
4 Eylül Mahallesi Necmi Soylu Caddesi No:5 Bilecik
Postcode
11300
Country
Turkey
General Email
meltem.topcu@vitra.com.tr

View All Listings by this Company
Manufacturer:
ECZACIBAŞI YAPI GEREÇLERİ SANAYİ VE TİCARET A.Ş
Company Name
ECZACIBAŞI YAPI GEREÇLERİ SANAYİ VE TİCARET A.Ş
Address
4 Eylül Mahallesi Necmi Soylu Caddesi No:5 Bilecik
Postcode
11300
Country
Turkey
General Email
meltem.topcu@vitra.com.tr

View All Listings by this Company

Print This Approval


#2203315

Range of deck mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies with stainless steel bodies (in various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The solenoid housing attaches to the main tap body via (black) LLDPE tubing. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2203315
Size:
½” BSP (M)
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R006 R008 R010 R557 R570
Expiry date:
31/03/2027
Model:
DSaaa.bbb.ccc.d.ee – DS220 Series InForm SMART taps. Where ‘aaa’ denotes the mounting type, the following options are available: DS221 – straight spout DS223 – bent spout Where ‘bbb’ denotes the projection of the spout from body to spout outlet in mm. Range 95mm - 195mm in 25mm increments. Where ‘ccc’ denotes the height of the tap from the underside of the rosette to the top of the body in mm. Range 170mm – 370mm including 170mm, 260mm, 310mm & 370mm. Where ‘d’ denotes the material finish, the following options are available: .1 – brushed/satin, .2 - mirror polished, .3 - PVD on brushed/satin, .4 - PVD on mirror polished or .5 – powder coated (PC). Where ‘ee’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company
Manufacturer:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 11 of 93

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.