Section Code 0055 : Assisted Bathing Units
Back To Directory SectionsRange of `assisted bathing` baths incorporating two in-line T-type thermostatic mixing valves, one on the hot supply to the bath tap and the other on the hot supply to the shower control valve. The bath is filled via pillar taps with single lever operatig members. The shepherds crook and shower handset flow is controlled via two ¼ turn ceramic disc headworks. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.
Assisted bath incorporating a thermostatic mixing valve to control both the flow and temperature with shower hose & handset. The shower handset is held in place by a shepherds crook. The bath spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 43°C. Maximum supply temperature 60°C.
‘System 2000’ range of assisted bathing units with the temperature controlled by a TMV. Flow is controlled by solenoid valves activated via an electronic panel operated by touchpad or push buttons. The supply to the self-closing trigger handsets is via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The product includes a combined quarter turn spherical valve and Y-pattern strainer incorporating a single check valve cartridge (suitable for backflow protection against Fluid Category 2) on each inlet. Maximum working pressure 6.0 bar. Maximum operating temperature 80°C, 44°C downstream of TMV.
Range of assisted bathing units, incorporating a thermostatic blending valve controlling the temperature. The flow to the terminal fittings is controlled by solenoid valve and actuated by control panel or remote. The baths are fitted with a deck mounted spout outlet, which incorporates a plastic flow straightener. The product also incorporates a shower hose and handset, the supply to which is fed via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The assembly incorporates combination valve assemblies installed at each inlet, which consist of a spherical valve, stainless steel strainer and an approved check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 6.0 bar. Maximum operating temperature 80°C.
Assisted bath incorporating a thermostatic mixing valve to control both the flow and temperature to either a spout outlet or shower handset. The bath has adjustable height and tilt functions. Maximum working pressure: 6.0 Bar. Maximum operating temperature: 46°C
Range of assisted bathing units. Flow is controlled via an electronic thermostatic mixing valve which can feed either a bath spout outlet or shower handset. The inlets to the electronic thermostatic mixing valve incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The bath has adjustable height and tilt functions. Maximum working pressure 6.0 bar. Maximum operating temperature 45°C
Range of assisted bathing units, incorporating a thermostatic blending valve controlling the temperature. The flow to the terminal fittings is controlled by solenoid valve and actuated by control panel. The baths are fitted with a deck mounted spout outlet, which incorporates a plastic flow straightener. The product also incorporates a shower hose and handset, the supply to which is fed via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The baths incorporate combination valve assemblies installed at each inlet, which consist of a spherical valve, stainless steel strainer and an approved check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 6.0 bar. Maximum supply temperature 60°C. Maximum outlet temperature (from TMV to discharge point) 50°C.
‘Parker 500’ assisted bathing unit. Flow is controlled via a thermostatic mixing valve, the inlet of which incorporates a stainless steel strainer and single check valve cartridge (suitable for backflow protection against Fluid Category 2) and feeds either a bath spout outlet or shower handset which incorporates a self-closing trigger. The inlet to the shower handset incorporates a plastic flow restrictor and a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. There is a combined spherical valve and strainer on the inlet to the bathing unit which incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). The ‘shepherds crook’ type shower outlet is protected via an AUK3 airgap arrangement. Maximum working pressure 6.0 bar. Maximum operating temperature 80°C
Page of
