Tubes

Section Code 1863 : Elastomeric.

Back To Directory Sections

#2303074

Range of shower hoses with TPE linings and EPDM ‘O’-rings. Maximum operating temperature 60°C. Open outlet use only.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2303074
Marking:
Hansgrohe on conical nut.
Installation Requirements:
R001
Expiry date:
31/03/2028
Model:
30 334 118 Hansgrohe Metaflex'C 800mm chrome, 28 152 xxx Hansgrohe Mariflex showerhose 1250mm, 28 262 xxx Hansgrohe Metaflex C showerhose 1250mm chrome, 28 644 xxx Hansgrohe Metaflex Shower hose 1250mm, 30 475 518 Hansgrohe Metaflex C showerhose 1250mm, 28 153 xxx Hansgrohe Mariflex showerhose 1500mm, 28 263 xxx Hansgrohe Metaflex C showerhose 1500mm, 28 645 xxx Hansgrohe Metaflex Shower hose 1500mm, 28 266 xxx Hansgrohe Metaflex C showerhose 1600mm chrome, 30 475 618 Hansgrohe Meta showerhose 1600mm, 31 475 618 Hansgrohe Metaflex C 1600mm, 28 155 xxx Hansgrohe Mariflex showerhose 1750mm, 28 265 xxx Hansgrohe Metaflex C showerhose 1750mm, 28 646 xxx Hansgrohe Metaflex Shower hose 1750mm, 30 511 718 Hansgrohe Metaflex showerhose 1750mm, 28 154 xxx Hansgrohe Mariflex showerhose 2000mm, 28 264 xxx Hansgrohe Metaflex C showerhose 2000mm chrome, 28 647 xxx Hansgrohe Metaflex Shower hose 2000mm.
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval

#2309035

Range of shower hoses. Model ML-PVC-DCHS01-XX is a PVC hose incorporating EPDM, NBR or Silicone seals. Model ML-SS-SKHS01-XX is a PVC or EPDM lined shower hose incorporating EPDM, NBR or silicone seals with a stainless-steel interlocked outer with (various finishes).

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2309035
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
Milan logo, WRAS and date of manufacture on ferrule (YYYY/MM/DD)
Installation Requirements:
R001
Expiry date:
30/09/2028
Model:
ML-PVC-DCHS01-XX ML-SS-SKHS01-XX ML-SS-SKHS01-XX XX denotes 01-Golden 02-black 03-Cr-Plated 04-Natural Surface colour and its connectors as below: G1/2, M15X1 ML-PVCDCHS01-XX XX denotes 01-Brushed Gold 02-Silver 03-Black and with connector G1/2”.
Approval Holder:
Ningbo Milan Sanitary Ware Technology Co., Ltd.
Company Name
Ningbo Milan Sanitary Ware Technology Co., Ltd.
Address
West of No. 18, West Industrial Zone 1st Road, Lubu Town, Yuyao City Ningbo,Zhejiang,China

View All Listings by this Company

Print This Approval

#2309310

Range of Stainless steel braided EPDM lined flexible hose assemblies with a variety of brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature: 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2309310
Size:
see model
Marking:
Leading, WRAS, Year of manufacture (YYYY) on ferrule
Installation Requirements:
R001
Expiry date:
30/09/2028
Model:
LEADING-EPDM-DN8 Available with connections: G3/8(F), G1/2(F), M8x1, M10x1, M12x1, G1/2(M), 15mm LEADING-EPDM-DN10 Available with connections: G3/8(F), G1/2(F), G3/4(F), M10x1, G1/2(M), 15mm LEADING-EPDM-DN13 Available with connections: G1/2(F), G3/4(F), G3/4(M)
Approval Holder:
Zhejiang Leading Plumbing Co., Ltd
Company Name
Zhejiang Leading Plumbing Co., Ltd
Address
No. 550, Jixin Road, Xinqiao, Taizhou, Zhejiang, China

View All Listings by this Company
Manufacturer:
Zhejiang Leading Plumbing Co., Ltd
Company Name
Zhejiang Leading Plumbing Co., Ltd
Address
No. 550, Jixin Road, Xinqiao, Taizhou, Zhejiang, China

View All Listings by this Company

Print This Approval

#2309025

Qualflex classic range of stainless steel braided EPDM lined flexible hoses incorporating EPDM O-rings. Maximum working pressure at 20°C ,10.0bar and maximum working pressure at 65°C , 6.0bar. Maximum operating temperature 65°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2309025
Size:
See models
Marking:
Qualflex, QWRAS, Pressure, temp and date of manufacture (YYM YY = year code and M = month code, A-Jan, B-Feb etc) on ferrule.
Installation Requirements:
R001
Expiry date:
30/09/2028
Model:
FH10 – 15mm pushfit x ½” BSP captive nut FH12 – 15mm pushfit x ¾” BSP captive nut FH20 – 22mm pushfit x ¾” BSP captive nut FH15 – 15mm pushfit x 15mm pushfit FH22 – 22mm pushfit x 22mm pushfit FV15 – 15mm pushfit x 15mm pushfit
Approval Holder:
Hydralectric Ltd.
Company Name
Hydralectric Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company
Manufacturer:
Hydralectric Ltd.
Company Name
Hydralectric Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company

Print This Approval

#2310102

‘Comfortflex’ range of silver braided shower hoses with a TPE inner hose and EPDM seals.Open outlet

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2310102
Size:
½” BSP captive nut.
Marking:
Hansgrohe on nut.
Installation Requirements:
R001
Expiry date:
31/10/2028
Model:
28 167 002, 28 167 xx0, 28 168 xx0, 28 169 002, 28 169 xx0, 28 162 002, 28 160 002. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval

#2110140

Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2110140
Size:
See model
Marking:
Tenby, WRAS, and date of manufacture (YYYY) on ferrule. Flow arrow on isolation valve.
Installation Requirements:
R001
Expiry date:
31/10/2026
Model:
AX-SS-01 DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. AX-SS-01 DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. AX-SS-02 DN8 bore: 15mm compression, ⅜” & ½” captive nut. AX-SS-02 DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. AX-SS-02 DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. AX-SS-02 DN17 & DN19 bore: 22mm compression, ¾” captive nut. AX-SS-03 DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). AX-SS-03 DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). AX-SS-03 DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). AX-SS-03 DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). AX-SS-04 DN10 bore: 15mm compression with isolation valve, 15mm pushfit. AX-SS-04 DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. AX-SS-04 DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. AX-SS-07 DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. AX-SS-07 DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. AX-SS-08 DN8 bore: 15mm compression, ⅜” & ½” BSP (M). AX-SS-08 DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). AX-SS-08 DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). AX-SS-08 DN17 & DN19 bore: 22mm compression, ¾” BSP (M). AX-SS-09 DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. AX-SS-09 DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. AX-SS-09 DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. AX-SS-10 DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. AX-SS-10 DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. AX-SS-11 DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit AX-SS-11 DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. AX-SS-11 DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. AX-SS-12 DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). AX-SS-12 DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). AX-SS-12 DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).
Approval Holder:
Tenby Imports & Exports Ltd.
Company Name
Tenby Imports & Exports Ltd.
Address
Unit 1 Crown House, Otterspool Way, Watford, Hertfordshire
Postcode
WD25 8HL

View All Listings by this Company

Print This Approval

#2103347

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2103347
Size:
CMFTCW-1510300 - 15mm compression x M10 CMFTCW-1512300 - 15mm compression x M12 CMFTCW-1515300 - 15mm compression x 15mm compression CMFTCW-15D300 - F1/2 x 15mm compression CMFTCW-15D500 - F1/2 x 15mm compression CMFTCW-15E300 - F3/4 x 15mm compression CMFTCW-22E300 - F3/4 x 22mm compression CMFTCWIV-15D300 - F1/2 x 15mm isolation valve CMFTCWIV-15E300 - F3/4 x 15mm isolation valve CMFTCWIV-22E300 - F3/4 x 22mm isolation valve CMFTCWP-15E300 - F3/4 x 15mm pushfit (used with copper tube manufactured to BS2871)
Marking:
MB (Brand of Navigator) WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
31/03/2026
Model:
CMFTCW-1510300, CMFTCW-1512300, CMFTCW-1515300, CMFTCW-15D300, CMFTCW-15D500, CMFTCW-15E300, CMFTCW-22E300, CMFTCWIV-15D300, CMFTCWIV-15E300, CMFTCWIV-22E300 & CMFTCWP-15E300
Approval Holder:
Navigator MSL Ltd.
Company Name
Navigator MSL Ltd.
Address
Mill Road, Sharnbrook, Beds.
Postcode
MK44 1NP
Phone
01234 781234
General Email
sales@navigatormsl.com

View All Listings by this Company

Print This Approval

#2310014

Stainless steel braided, PEX lined flexible hose assemblies with EPDM washers and O ring incorporating an isolation valve (brass body and ball), tee piece (brass) and incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2310014
Size:
Stainless steel braided, PEX lined flexible hose assembly incorporating 3/8" BSP split nut x 3/8" spigot end connection.
Marking:
IDC (E) logo, size, temperature and pressure on hose sleeve.
Installation Requirements:
R001 R008
Expiry date:
31/10/2028
Model:
322-1175.
Approval Holder:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Zhejiang, Taizhou City, Zhejiang Province, P. R.China
Country
China

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Zhejiang, Taizhou City, Zhejiang Province, P. R.China
Country
China

View All Listings by this Company

Print This Approval

#2103346

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2103346
Size:
DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:
MB (Brand of Navigator used under license by Wolseley), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
31/03/2026
Model:
236550, 236548, 236543, 236547, 236551, 236545, 236549, 236542, 236541, 236544 & 236546
Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval

#2312018

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections (see models). Some models incorporate a screwdriver operated isolation valve. All compression and push-fit connections are for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 7.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2312018
Size:
See Model list. Note, for the connection sizes listed in the models below, use the following key: XXMM = XXmm compression, MXXx1 = MXXx1 (M) FXX” = XX” BSP (F) XXmm Pushfit = XXmm Pushfit
Marking:
Dingbo logo, WRAS and Date of manufacture (YYYY) on ferrule
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
Model Code/Number (Connection Size) DB8MM-15MM×M10L (15MM × M10x1) DB8MM-15MM×M10S (15MM × M10×1) DB8MM-1/2×M10L (F1/2" × M10×1) DB8MM-1/2×M10S (F1/2" × M10×1) DB9MM-1/2×1/2 (F1/2" × F1/2") DB9MM-1/2×M12L (F1/2" × M12×1) DB9MM-1/2×M12S (F1/2" × M12×1) DB9MM-15MM×M12L (15MM × M12×1) DB9MM-15MM×M12S (15MM × M12×1) DB9MM-1/2×15MM (F1/2" × 15MM) DB9MM-15MM×15MM (15MM × 15MM) DB9MM-3/4×15MM (F3/4" × 15MM) DB9MM-1/2×15MMV (F1/2" × 15MM with VALVE) DB9MM-3/4×15MMV (F3/4" × 15MM with VALVE) DB12MM-1/2×1/2 (F1/2" × F1/2") DB12MM-1/2×15MM (F1/2" × 15MM) DB12MM-15MM×15MM (15MM × 15MM) DB12MM-3/4×15MM (F3/4" × 15MM) DB12MM-3/4×22MM (F3/4" × 22MM) DB12MM-3/4×15MMV (F3/4" × 15MM with VALVE) DB12MM-3/4×22MMV (F3/4" × 22MM with VALVE) DB19MM-3/4×22MM (F3/4" × 22MM) DB19MM-3/4C×22MM (F3/4" × 22MM) DB12MM-1/2 x 15mm Push- fit (F1/2" × 15mm Pushfit) DB12MM-3/4 x 15mm Push- fit (F3/4" × 15mm Pushfit) DB12MM-1/2 x 15mm Push- fit VALVE (F1/2" × 15mm Pushfit with VALVE) DB12MM-3/4 x 15mm Push- fit VALVE (F3/4" × 15mm Pushfit with VALVE) DB12MM-1/2 x 22mm Push- fit (F1/2" × 22mm Pushfit) DB12MM-3/4 x 22mm Push- fit (F3/4" × 22mm Pushfit) DB12MM-1/2 x 22mm Push- fit VALVE (F1/2" × 22mm Pushfit with VALVE) DB12MM-3/4 x 22mm Push- fit VALVE (F3/4" × 22mm Pushfit with VALVE) DB12MM-15mm Push-fit x 15mm Push-fit (15mm Pushfit × 15mm Pushfit) DB12MM-22mm Push-fit x 22mm Push-fit (22mm Pushfit × 22mm Pushfit) Note, any models with either ‘VALVE’ or ‘V’ on the end of the model name incorporate a screwdriver operated isolation valve.
Approval Holder:
Zhejiang Dingbo Plumbing Manufacturing Co Ltd
Company Name
Zhejiang Dingbo Plumbing Manufacturing Co Ltd
Address
No.388 SHUPU NORTH ROAD, LUCHENG LIGHT INDUSTRIAL ZONE, WENZHOU CITY, ZHEJIANG PROVINCE, CHINA 325019

View All Listings by this Company
Manufacturer:
Zhejiang Dingbo Plumbing Manufacturing Co Ltd
Company Name
Zhejiang Dingbo Plumbing Manufacturing Co Ltd
Address
No.388 SHUPU NORTH ROAD, LUCHENG LIGHT INDUSTRIAL ZONE, WENZHOU CITY, ZHEJIANG PROVINCE, CHINA 325019

View All Listings by this Company

Print This Approval

#2312069

Hydravend range of PVC coated (grey or white in colour), hytrel lined, flexible thermoplastic hoses, incorporating a white quadruple layered hose with a black TPE inner lining. The hoses are supplied with plastic or brass end connectors and with or without servicing valves. Maximum working pressure and temperature: 12.0 bar Cold water use only.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2312069
Size:
DN06, DN08, DN10, DN12
Marking:
Qualiflex logo, QWRAS, Temperature, Pressure and date of manufacture (YY) on Ferrule
Installation Requirements:
R001 R008
Expiry date:
31/12/2028
Model:
06HV 08HV 10HV 12HV Hose assembly part number follows the below format: (The example given is for a Ø6mm internal diameter, Hydravend Range, 900mm overall length, female to male fittings) DDHHLLLFNN Where DD = diameter HH = Hose type LLL = Length FF where each F = Fitting code covering type, size and material. (M = Male, F = Female, D = Compression, S = Standpipe, E = Elbow, J = JG Fitting & P = Qualflex pushfit) NN = Number
Approval Holder:
Hydralectric Ltd.
Company Name
Hydralectric Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company

Print This Approval

#2312077

Range of shower hoses with a rubber outer layer (various finishes, see models) and either PVC or PEX inner liner (see models), EPDM or NBR O-rings (see models) and either brass or stainless-steel connectors (see models). Open Outlet use only. Maximum operating temperature 85.0°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2312077
Size:
See model
Marking:
HRN (trademark), WRAS and manufacturing date (MM/YY) on the ferrule.
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
Model Code: 17X-XXX-X-X-X-X The ‘X’s denote multiple parts of the assembly, and are explained below: 1st ‘X’ denotes the DN and can be replaced with: 0 = DN8, 1 = DN10 2nd, 3rd & 4th ‘X’s denotes the length and can be replaced with, as examples: 30 = 30cm Length (Shortest Hose) 300 = 300cm Length (Longest Hose) 5th ‘X’ denotes the colour and can be replaced with: 1 = Black, 2 = White, 3 = Silver, 4 = Rose, 5 = Golden, 6 = Gray. 6th ‘X’ denotes the inlet size and can be replaced with: 1 = ½” BSP (F) Conical Nut, 2 = M20 (F) Conical Nut, 3 = M19 (F) Conical Nut, 4 = M18 (F) Conical Nut. 7th ‘X’ denotes the outlet size and can be replaced with: 1 = ½” BSP (F) Conical Nut, 2 = M20 (F) Conical Nut, 3 = M19 (F) Conical Nut, 4 = M18 (F) Conical Nut. 8th ‘X’ denotes the inner tube material and can be replaced with: 1 = PVC, 2 = PEX.
Approval Holder:
APIS (Xiamen) Co., Ltd.
Company Name
APIS (Xiamen) Co., Ltd.
Address
1F, 5F, Main building No 198-204 YingYao Road
Country
Jimei District

View All Listings by this Company
Manufacturer:
APIS (Xiamen) Co., Ltd.
Company Name
APIS (Xiamen) Co., Ltd.
Address
1F, 5F, Main building No 198-204 YingYao Road
Country
Jimei District

View All Listings by this Company

Print This Approval

#240202006

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240202006
Size:
See Models
Marking:
IDC Logo, Size, PN, WRAS and Date of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
GMF series DN6 GMF0613S - M10 short male x 3/8"F captive nut GMF0613L - M10 Long male x 3/8"F captive nut GMF0615S - M10 short male x 1/2"F captive nut GMF0615L - M10 Long male x 1/2"F captive nut GMF0603S - M8 short Male x 3/8"F captive nut GMF0603L - M8 long Male x 3/8"F captive nut DN8 GMF0813S - M10 short male x 3/8"F captive nut GMF0813L - M10 Long male x 3/8"F captive nut GMF0815S - M10 short male x 1/2"F captive nut GMF0815L - M10 Long male x 1/2"F captive nut GMF0803S - M8 short male x 3/8"F captive nut GMF0823S - M12 short male x 3/8"F captive nut GMF0823L - M12 Long male x 3/8"F captive nut GMF0825S - M12 short male x 1/2"F captive nut GMF0825L - M12 Long male x 1/2"F captive nut DN10 GMF1013S - M10 short male x 3/8"F captive nut GMF1013L - M10 Long male x 3/8"F captive nut GMF1015S - M10 short male x 1/2"F captive nut GMF1015L - M10 Long male x 1/2"F captive nut GMF1023S - M12 short male x 3/8"F captive nut GMF1023L - M12 Long male x 3/8"F captive nut GMF1025S - M12 short male x 1/2"F captive nut GMF1025L - M12 Long male x 1/2"F captive nut DN13 GMF1313S - M10 short male x 3/8"F captive nut GMF1313L - M10 Long male x 3/8"F captive nut GMF1315S - M10 short male x 1/2"F captive nut GMF1315L - M10 Long male x 1/2"F captive nut GMF1323S - M12 short male x 3/8"F captive nut GMF1323L - M12 Long male x 3/8"F captive nut GMF1325S - M12 short male x 1/2"F captive nut GMF1325L - M12 Long male x 1/2"F captive nut GAN series DN8 GAN0833 - 3/8"F x 3/8"F captive nut GAN0835 - 3/8"F x 1/2"F captive nut GAN0855 - 1/2"F x 1/2"F captive nut GAN0877 - 3/4"F x 3/4"F captive nut GAN0857 - 1/2"F x 3/4"F captive nut DN10 GAN1033 - 3/8"F x 3/8"F captive nut GAN1055 - 1/2"F x 1/2"F captive nut GAN1077 - 3/4"F x 3/4"F captive nut DN13 GAN1333 - 3/8"F x 3/8"F captive nut GAN1355 - 1/2"F x 1/2"F captive nut GAN1377 - 3/4"F x 3/4"F captive nut GAM series DN8 GAM0833 - 3/8"M x 3/8"F captive nut GAM0835 - 3/8"M x 1/2"F captive nut GAM0853 - 1/2"M x 3/8"F captive nut GAM0855 - 1/2"M x 1/2"F captive nut GAM0877 - 3/4"M x 3/4"F captive nut DN10 GAM1033 - 3/8"M x 3/8"F captive nut GAM1035 - 3/8"M x 1/2"F captive nut GAM1053 - 1/2"M x 3/8"F captive nut GAM1055 - 1/2"M x 1/2"F captive nut GAM1077 - 3/4"M x 3/4"F captive nut DN13 GAM1333 - 3/8"M x 3/8"F captive nut GAM1335 - 3/8"M x 1/2"F captive nut GAM1353 - 1/2"M x 3/8"F captive nut GAM1355 - 1/2"M x 1/2"F captive nut GAM1377 - 3/4"M x 3/4"F captive nut GMM series DN8 GMM0833 - 3/8"M x 3/8"M GMM0855 - 1/2"M x 1/2"M DN10 GMM1033 - 3/8"M x 3/8"M GMM1055 - 1/2"M x 1/2"M GMM1055 - 1/2"M x 1/2"M DN13 GMM1355 - 1/2"M x 1/2"M GMM1377 - 3/4"M x 3/4"M GEF series DN8 GEF0833 - 3/8"Elbow F x 3/8"F GEF0835 - 3/8"Elbow F x 1/2"F GEF0853 - 1/2"Elbow F x 3/8"F GEF0855 - 1/2"Elbow F x 1/2"F DN10 GEF1055 - 1/2"Elbow F x 1/2"F GEF1057 - 1/2"Elbow F x 3/4"F GEF1077 - 3/4"Elbow F x 3/4"F DN13 GEF1355 - 1/2"Elbow F x 1/2"F GEF1357 - 1/2"Elbow F x 3/4"F GEF1377 - 3/4"Elbow F x 3/4"F GEM series DN8 GEM0833 - 3/8"Elbow F x 3/8"M GEM0835 - 3/8"Elbow F x 1/2"M GEM0853 - 1/2"Elbow F x 3/8"M GEM0855 - 1/2"Elbow F x 1/2"M DN10 GEM1055 - 1/2"Elbow F x 1/2"M GEM1057 - 1/2"Elbow F x 3/4"M GEM1077 - 3/4"Elbow F x 3/4"M DN13 GEM1355 - 1/2"Elbow F x 1/2"M GEM1357 - 1/2"Elbow F x 3/4"M GEM1377 - 3/4"Elbow F x 3/4"M GMC series DN8 GMC0815S - M10 short male x 15mm compression GMC0815L - M10 Long male x 15mm compression GMC0825S - M12 short male x 15mm compression GMC0825L - M12 Long male x 15mm compression DN10 GMC1015S - M10 short male x 15mm compression GMC1015L - M10 Long male x 15mm compression GMC1025S - M12 short male x 15mm compression GMC1025L - M12 Long male x 15mm compression DN13 GMC1315S - M10 short male x 15mm compression GMC1315L - M10 Long male x 15mm compression GMC1325S - M12 short male x 15mm compression GMC1325L - M12 Long male x 15mm compression GAC series DN8 GAC0855 - 15mm compression x 1/2"F captive nut GAC0857 - 15mm compression x 3/4"F captive nut GAC0877 - 22mm compression x 3/4"F captive nut DN10 GAC1053 - 15mm compression x 3/8"F captive nut GAC1055 - 15mm compression x 1/2"F captive nut GAC1057 - 15mm compression x 3/4"F captive nut GAC1077 - 22mm compression x 3/4"F captive nut DN13 GAC1355 - 15mm compression x 1/2"F captive nut GAC1357 - 15mm compression x 3/4"F captive nut GAC1377 - 22mm compression x 3/4"F captive nut GAC1977 - DN19 22mm compression x 3/4"F captive nut GVF series DN8 GVF0855 - 15mm isolating valve x 1/2"F captive nut GVF0877 - 22mm isolating valve x 3/4"F captive nut DN10 GVF1055 - 15mm isolating valve x 1/2"F captive nut GVF1057 - 15mm isolating valve x 3/4"F captive nut GVF1077 - 22mm isolating valve x 3/4"F captive nut DN13 GVF1355 - 15mm isolating valve x 1/2"F captive nut GVF1377 - 22mm isolating valve x 3/4"F captive nut GVF1977 - DN19 22mm isolating valve x 3/4"F captive nut GDC series DN8 GDC0855 - 15mm compression x 15mm compression GDC0877 - 22mm compression x 22mm compression DN GDC1055 - 15mm compression x 15mm compression GDC1077 - 22mm compression x 22mm compression DN13 GDC1355 - 15mm compression x 15mm compression GDC1377 - 22mm compression x 22mm compression DN19 GDC1977 - 22mm compression x 22mm compression GDEF series DN13 GDEF1355 - 1/2"Elbow F x 1/2"Elbow F
Approval Holder:
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Zhejiang, Taizhou City, Zhejiang Province, P. R.China
Country
China
General Email

View All Listings by this Company

Print This Approval

#240202045

Range of stainless steel braided, EPDM lined flexible hose assemblies. Models are available with a variety of end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240202045
Size:
DN8 - DN19
Marking:
FF logo, Year of manufacture (YY) and WRAS on ferrule
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
DN8: H334-C-W - 15mm compression end -M12x1 male short H335-L-W - 15mm compression end - M12 x1 male long H336-L-W - 15mm compression end - M10 x1 male long H337-C-W - 15mm compression end - M10 x1 male short H225-C-W - 1/2" BSP (F) - M10 x1 male short H225-L-W - 1/2" BSP (F) - M10 x1 male long H233-C-W - 3/8" BSP (F) - M10 x1 male short H233-L-W - 3/8" BSP (F) - M10 x1 male long H392-W - 3/8" BSP (F) 90° - 3/8" BSP (F) conical seat H420-W - 3/8" BSP (F) - 3/8" BSP (F) conical seat H600-W - 3/8" BSP (F) 90°- 3/8" BSP (F) 90° conical seat DN10: A113-W - 1/2" BSP (F) - 15 mm compression end B114-W - 3/4" BSP (F) - 15 mm compression end A327-W - 15mm compression end - 15mm compression end A111-W - 1/2" BSP (F) Filling loop - 1/2" BSP (F) Filling loop E203-W - 3/8" BSP (F) - 3/8” BSP (F) 90° E204-W - 1/2" BSP (F) - 1/2” BSP (F) 90° E206-W - 3/4" BSP (F) - 3/4" BSP (F) 90° E290-W - 1/2" BSP (F) - 3/4" BSP (F) 90° E893-W - 3/4" BSP (F) 90° - 3/4" BSP (F) 90° E520-W - 1/2" BSP (M) - 1/2” BSP (F) 90° E201-W - 1/2" BSP (F) - 1/2" BSP (F) E198-W - 1/2" BSP (M) – 1/2" BSP (F) E487-W - 3/4" BSP (F) - 3/4" BSP (F) E200-W - 3/8" BSP (F) - 3/8” BSP (F) E573-W - 1/2" BSP (F) 90° - ½” BSP (F) 90° E752-W - 3/8" BSP (F) 90° - 3/8” BSP (F) 90° E693-W - 1/2" BSP (F) 90° - ¾” BSP (F) 90° DN13: B115-W - 3/4" BSP (F) - 22mm compression end A343-W - 1/2" BSP (F) - 15mm compression end C338-W - 3/4" BSP (F) - 15mm compression end B395-W - 22mm compression end - 22 mm compression end F478-W - 1/2" BSP (F) - 15mm straight tube A327-GW - 15mm compression end - 15mm compression end F342-W - 15mm straight tube - 15mm straight tube F764-W - 1/2" BSP (F) Filling loop - 15mm compression end F800-W - 1/2" BSP (F) 90° Filling loop - 15mm compression end F213-W - 1/2" BSP (F) - ½” BSP (F) 90° F214-W - 1/2" BSP (M) - ½” BSP (F) 90° F215-W - 3/4" BSP (F) - 3/4" BSP (F) 90° F217-W - 3/4" BSP (M) - 3/4" BSP (F) 90° F493-W - 1/2" BSP (F) - 3/4" BSP (F) 90° F350-W - 3/4" BSP (F) 90°- 3/4" BSP (F) 90° F207-W - 1/2" BSP (M) – 1/2" BSP (F) F210-W - 1/2" BSP (F) - 1/2" BSP (F) F211-W - 3/4" BSP (F) - 3/4" BSP (F) F209-W - 3/4" BSP (M) - 3/4" BSP (F) F373-W - 3/4" BSP (F) - 1/2" BSP (F) F888-W - 1/2" BSP (F) 90° - ½” BSP (F) 90° DN16: N525-W - 3/4" BSP (F) - 3/4" BSP (F) 90° N539-W - 3/4" BSP (F) - 3/4" BSP (F) N637-W - 3/4" BSP (M) - 3/4" BSP (F) N526-W - 3/4" BSP (F) 90° - 3/4" BSP (F) 90° DN19: C753-W - 3/4" BSP (F) - 22mm straight tube C754-W - 3/4" BSP (F) - 22mm compression end C597-W - 22mm straight tube - 22mm straight tube C431-W - 3/4" BSP (F) - 3/4" BSP (F) C755-W - 22mm compression end - 22mm compression end
Approval Holder:
Flexinox Srl.
Company Name
Flexinox Srl.
Address
Via F. Comelli, 40-33034 Fagana, Udine
Country
Italy

View All Listings by this Company
Manufacturer:
Flexinox Srl.
Company Name
Flexinox Srl.
Address
Via F. Comelli, 40-33034 Fagana, Udine
Country
Italy

View All Listings by this Company

Print This Approval

#240402030

Range of nylon braided (DG50E model series) or stainless steel braided (DG10E model series), EPDM lined flexible hose assemblies with a variety of end connections (see models for full breakdown), including EPDM washers and ‘O’-rings where applicable. Some models are supplied with screwdriver operated isolation valves (see model list). All compression and push-fit fittings are to be used with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16 bar. Maximum operating temperature: 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240402030
Size:
See models below. Note: Comp = compression, PF = push-fit
Marking:
Fanski, WRAS and year of manufacture (YYYY) on ferrule
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
DG50E-WRAS-100-L - 15mm comp x M10 short, DN8 DG10E-WRAS-300-L - 15mm comp x M10 short, DN8 DG50E-WRAS-101-L - 15mm comp x M12 short, DN8 DG10E-WRAS-301-L - 15mm comp x M12 short, DN8 DG50E-WRAS-102-L - ⅜” BSP (F) x 10mm comp, DN10 DG10E-WRAS-302-L - ⅜” BSP (F) x 10mm comp, DN10 DG50E-WRAS-103-L - ½” BSP (F) elbow x 15mm comp, DN10 DG10E-WRAS-303-L - ½” BSP (F) elbow x 15mm comp, DN10 DG50E-WRAS-104-L - ½” BSP (F) x ½” BSP (F), DN10 DG10E-WRAS-304-L - ½” BSP (F) x ½” BSP (F), DN10 DG50E-WRAS-105-L - ½” BSP (F) x 15mm comp iso valve, DN10 DG10E-WRAS-305-L - ½” BSP (F) x 15mm comp iso valve, DN10 DG50E-WRAS-106-L - 15mm PF x 15mm PF iso valve, DN10 DG10E-WRAS-306-L - 15mm PF x 15mm PF iso valve, DN10 DG50E-WRAS-107-L - ¾” BSP (F) x 22mm comp iso valve, DN13 DG10E-WRAS-307-L - ¾” BSP (F) x 22mm comp iso valve, DN13 DG50E-WRAS-108-L - ¾” BSP (F) x 22mm comp, DN13 DG10E-WRAS-308-L - ¾” BSP (F) x 22mm comp, DN13 DG50E-WRAS-109-L - 22mm PF x 22mm PF iso valve, DN13 DG10E-WRAS-309-L - 22mm PF x 22mm PF iso valve, DN13 DG50E-WRAS-110-L - ⅜” BSP (F) x 15mm comp, DN10 DG10E-WRAS-310-L - ⅜” BSP (F) x 15mm comp, DN10 DG50E-WRAS-111-L - ½” BSP (F) x 15mm comp, DN10 DG10E-WRAS-311-L - ½” BSP (F) x 15mm comp, DN10 DG50E-WRAS-112-L - 10mm comp x 15mm comp, DN10 DG10E-WRAS-312-L - 10mm comp x 15mm comp, DN10 DG50E-WRAS-113-L - 15mm comp x 15mm comp, DN10 DG10E-WRAS-313-L - 15mm comp x 15mm comp, DN10 DG50E-WRAS-114-L - ¾” BSP (F) x 15mm comp, DN10 DG10E-WRAS-314-L - ¾” BSP (F) x 15mm comp, DN10 DG50E-WRAS-115-L - 15mm comp x 22mm comp, DN10 DG10E-WRAS-315-L - 15mm comp x 22mm comp, DN10 DG50E-WRAS-116-L - ½” BSP (F) x 22mm comp, DN10 DG10E-WRAS-316-L - ½” BSP (F) x 22mm comp, DN10 DG50E-WRAS-117-L - ¾” BSP (F) x 15mm comp iso valve, DN10 DG10E-WRAS-317-L - ¾” BSP (F) x 15mm comp iso valve, DN10 DG50E-WRAS-118-L - 15mm PF x M10x1 short, DN10 DG10E-WRAS-318-L - 15mm PF x M10x1 short, DN10 DG50E-WRAS-119-L - 15mm PF x M12x1 short, DN10 DG10E-WRAS-319-L - 15mm PF x M12x1 short, DN10 DG50E-WRAS-120-L - ¾” BSP (F) x 15mm PF, DN10 DG10E-WRAS-320-L - ¾” BSP (F) x 15mm PF, DN10 DG50E-WRAS-121-L - 15mm PF x ½” BSP (F) elbow, DN10 DG10E-WRAS-321-L - 15mm PF x ½” BSP (F) elbow, DN10 DG50E-WRAS-122-L - 15mm comp x 15mm PF, DN10 DG10E-WRAS-322-L - 15mm comp x 15mm PF, DN10 DG50E-WRAS-123-L - 15mm PF x 15mm PF, DN10 DG10E-WRAS-323-L - 15mm PF x 15mm PF, DN10 DG50E-WRAS-124-L - ¾” BSP (F) x ¾” BSP (F), DN13 DG10E-WRAS-324-L - ¾” BSP (F) x ¾” BSP (F), DN13 DG50E-WRAS-125-L - 22mm comp x 22mm comp, DN13 DG10E-WRAS-325-L - 22mm comp x 22mm comp, DN13 DG50E-WRAS-126-L - 22mm PF x 22mm comp, DN13 DG10E-WRAS-326-L - 22mm PF x 22mm comp, DN13 DG50E-WRAS-127-L - 22mm PF x 22mm PF, DN13 DG10E-WRAS-327-L - 22mm PF x 22mm PF, DN13 DG50E-WRAS-128-L - ½” BSP (F) x M10 short, DN8 DG10E-WRAS-328-L - ½” BSP (F) x M10 short, DN8 DG50E-WRAS-129-L - ⅜” BSP (F) x M10 short, DN8 DG10E-WRAS-329-L - ⅜” BSP (F) x M10 short, DN8 DG50E-WRAS-130-L - 15mm comp x 15mm comp iso valve, DN10 DG10E-WRAS-330-L - 15mm comp x 15mm comp iso valve, DN10 DG50E-WRAS-131-L - ¾” BSP (F) x ¾” BSP (F) elbow, DN10 DG10E-WRAS-331-L - ¾” BSP (F) x ¾” BSP (F) elbow, DN10 DG50E-WRAS-132-L - ⅜” BSP (F) X ⅜” BSP (F), DN8 DG10E-WRAS-332-L - ⅜” BSP (F) X ⅜” BSP (F), DN8 DG50E-WRAS-133-L - ⅜” BSP (F) X ⅜” BSP (F) elbow, DN8 DG10E-WRAS-333-L - ⅜” BSP (F) X ⅜” BSP (F) elbow, DN8 DG50E-WRAS-134-L - ⅜” BSP (F) x ¼" BSP (F), DN8 DG10E-WRAS-334-L - ⅜” BSP (F) x ¼" BSP (F), DN8 DG50E-WRAS-135-L - ½” BSP (F) x ½" BSP (M), DN13 DG10E-WRAS-335-L - ½” BSP (F) x ½" BSP (M), DN13 DG50E-WRAS-136-L - 15mm comp x ½” BSP (M), DN13 DG10E-WRAS-336-L - 15mm comp x ½” BSP (M), DN13 DG50E-WRAS-137-L - ¾” BSP (F) x ¾" BSP (M), DN13 DG10E-WRAS-337-L - ¾” BSP (F) x ¾" BSP (M), DN13 DG50E-WRAS-138-L - ½” BSP (F) x ½” BSP (F) elbow, DN10 DG10E-WRAS-338-L - ½” BSP (F) x ½” BSP (F) elbow, DN10 DG50E-WRAS-139-L - ½” BSP (F) x ½” BSP (M), DN8 DG10E-WRAS-339-L - ½” BSP (F) x ½” BSP (M), DN8 DG50E-WRAS-140-L - ½” BSP (F) x ½” BSP (F), DN8 DG10E-WRAS-340-L - ½” BSP (F) x ½” BSP (F), DN8 DG50E-WRAS-141-L - ½” BSP (F) x 15mm comp iso valve, DN13 DG10E-WRAS-341-L - ½” BSP (F) x 15mm comp iso valve, DN13 DG50E-WRAS-142-L - ½” BSP (F) x ½” BSP (F), DN13 DG10E-WRAS-342-L - ½” BSP (F) x ½” BSP (F), DN13 DG50E-WRAS-143-L - ½” BSP (F) x 15mm comp, DN13 DG10E-WRAS-343-L - ½” BSP (F) x 15mm comp, DN13 DG50E-WRAS-144-L - 22mm comp x 22mm comp iso valve, DN13 DG10E-WRAS-344-L - 22mm comp x 22mm comp iso valve, DN13 DG50E-WRAS-145-L - 15mm comp x 15mm comp, DN13 DG10E-WRAS-345-L - 15mm comp x 15mm comp, DN13 DG50E-WRAS-146-L - 15mm comp x M12x1 short, DN10 DG10E-WRAS-346-L - 15mm comp x M12x1 short, DN10 DG50E-WRAS-147-L - ½” BSP (F) x 14.7mm comp iso valve, DN10 DG10E-WRAS-347-L - ½” BSP (F) x 14.7mm comp iso valve, DN10 DG50E-WRAS-148-L - ¾” BSP (F) x 21mm comp iso valve, DN13 DG10E-WRAS-348-L - ¾” BSP (F) x 21mm comp iso valve, DN13 DG50E-WRAS-149-L - 15mm comp x M12x1 long, DN10 DG10E-WRAS-349-L - 15mm comp x M12x1 long, DN10 DG50E-WRAS-150-L - ½” BSP (F) x M12x1 short, DN8 DG10E-WRAS-350-L - ½” BSP (F) x M12x1 short, DN8 DG50E-WRAS-151-L - ½” BSP (F) x 15mm PF, DN10 DG10E-WRAS-351-L - ½” BSP (F) x 15mm PF, DN10 DG50E-WRAS-152-L - ½” BSP (F) x 15mm PF iso valve, DN10 DG10E-WRAS-352-L - ½” BSP (F) x 15mm PF iso valve, DN10 DG50E-WRAS-153-L - ¾” BSP (F) x 22mm PF, DN13 DG10E-WRAS-353-L - ¾” BSP (F) x 22mm PF, DN13 DG50E-WRAS-154-L - ¾” BSP (F) x 22mm PF iso valve, DN13 DG10E-WRAS-354-L - ¾” BSP (F) x 22mm PF iso valve, DN13 DG50E-WRAS-155-L - ½” BSP (F) x 15mm PF, DN13 DG10E-WRAS-355-L - ½” BSP (F) x 15mm PF, DN13 DG50E-WRAS-156-L - ¾” BSP (F) x 15mm PF, DN13 DG10E-WRAS-356-L - ¾” BSP (F) x 15mm PF, DN13 DG50E-WRAS-157-L - ⅜” BSP (F) x M10x1 short, DN6 DG10E-WRAS-357-L - ⅜” BSP (F) x M10x1 short, DN6 DG50E-WRAS-158-L - ½” BSP (F) x M10x1 short, DN6 DG10E-WRAS-358-L - ½” BSP (F) x M10x1 short, DN6 DG50E-WRAS-159-L - ⅜” BSP (F) x M8x1 short, DN6 DG10E-WRAS-359-L - ⅜” BSP (F) x M8x1 short, DN6 DG50E-WRAS-160-L - ½” BSP (F) x M10x1 short, DN6 DG10E-WRAS-360-L - ½” BSP (F) x M10x1 short, DN6 DG50E-WRAS-161-L - ⅜” BSP (F) x M8x1 short, DN6 DG10E-WRAS-361-L - ⅜” BSP (F) x M8x1 short, DN6 DG50E-WRAS-162-L - ½” BSP (F) x 15mm PF, DN13 DG10E-WRAS-362-L - ½” BSP (F) x 15mm PF, DN13 DG50E-WRAS-163-L - ¾” BSP (F) x 15mm PF, DN13 DG10E-WRAS-363-L - ¾” BSP (F) x 15mm PF, DN13 DG50X-WRAS-164-L - M12x1 short x M8x1 short DG10X-WRAS-364-L - M12x1 short x M8x1 short DG50X-WRAS-165-L - M12x1 short x M8x1 short DG50X-WRAS-365-L - M12x1 short x M8x1 short DG50X-WRAS-166-L - F ½” BSP x 15mm push-fit iso valve DG50X-WRAS-366-L - F ½” BSP x 15mm push-fit iso valve Models added July 2025: DG10E-WRAS-465-L, ½” BSP (F) x ⅜” BSP (F), DN6, DG10E-WRAS-466-L, ½” BSP (F) x ⅜” BSP (F), DN8, DG10E-WRAS-467-L, 15mm push-fit x ½" BSP (M), DN10, DG10E-WRAS-468-L, ¾” BSP (F) x 22mm push-fit , DN13, DG10E-WRAS-473-L, ½” BSP (F) x M10 long, DN10, DG10E-WRAS-474-L, ½” BSP (F) x M10 short, DN10, DG10E-WRAS-475-L, ½" BSP (M)x M10 long, DN10, DG10E-WRAS-476-L, ½" BSP (M)x M10 short, DN10.
Approval Holder:
Fanski Group Inc.
Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company
Manufacturer:
Fanski Group Inc.
Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company

Print This Approval

#240402069

Stainless-steel braided EPDM lined flexible hose assembly with EPDM gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240402069
Size:
½” BSP captive nut inlet & outlet.
Marking:
JOFLEX (brand of Junaid Sanitary & Electrical Req. Trading LLC), WRAS and year of manufacture (YYYY) on ferule.
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
KFSP-1001
Approval Holder:
Junaid Sanitary & Electrical Req. Trading LLC
Company Name
Junaid Sanitary & Electrical Req. Trading LLC
Address
PO Box 34862, Dubai
Country
United Arab Emirates

View All Listings by this Company

Print This Approval

#240202083

Stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals. Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240202083
Size:
See Models
Marking:
Aquazone, Size, PN, WRAS and Date of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
AQF-T01-F1/2x F1/2 Note last number in code is length e.g. AQF-T01-F1/2F1/2-20 20cm length hose AQF-T01-F1/2F1/2-30 30 cm length hose
Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval

#240602004

Range of stainless-steel braided EPDM lined flexible hoses, incorporating EPDM gaskets. Some models incorporate an isolation valve. Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240602004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models
Marking:
Hitik, WRAS and year of manufacture (YYYY) on crimped connection
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
H1E3D15F08 - 15mm x M10, DN10 H1E3D15F12 - 15mm x 3/4”, DN10 H1E3D15D15 - 15mm x 15mm, DN10 H1E3I15F08 - 15mm-Iso Valve x 1/2”, DN10 H1E3I15F12 - 15mm-Iso Valve x 3/4”, DN10 H1E3F08F08 - 1/2” x 1/2”, DN10 H1E3F08F12 - 1/2” x 3/4”, DN10 H1E3L08L08 - 1/2” x 1/2”, DN10 H1E4D15F08 - 15mm x 1/2”, DN13 H1E4D22F12 - 22mm x 3/4”, DN13 H1E4D22D22 - 22mm x 22mm, DN13 H1E4I22F12 - 22mm-Iso Valve x 3/4”, DN13 H1E2D15M30 - 15mm x M10, DN8 H1E2D15M36 - 15mm x M12, DN8
Approval Holder:
Yuhuan Hitik Plumbing Manufacturing
Company Name
Yuhuan Hitik Plumbing Manufacturing
Address
CaiSang Industry Park, Yuhuan, Zhejiang, China

View All Listings by this Company
Manufacturer:
Yuhuan Hitik Plumbing Manufacturing
Company Name
Yuhuan Hitik Plumbing Manufacturing
Address
CaiSang Industry Park, Yuhuan, Zhejiang, China

View All Listings by this Company

Print This Approval

#240202086

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240202086
Size:
See Models
Marking:
Hydraflex Logo, Size, & WRAS on ferrule.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
W-TAPTAILXXF W-TAPXXFF W-TAPXXMF W-TAPXXMM W-TAPXXFE W-TAPXXME W-TAPTAILXX W-TAPXX W-TAPXXV W-TAPXXMB XX will be replaced with the appropriate size of fitting.
Approval Holder:
Hydraflex Plumbing & Cooling Hoses Ltd.
Company Name
Hydraflex Plumbing & Cooling Hoses Ltd.
Address
11 Stirling Park Laker Road Rochester Kent
Postcode
ME1 3QR
Country
United Kingdom
General Email
rochester@Hydraflex.co.uk

View All Listings by this Company

Print This Approval

#2103348

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2103348
Size:
SEE MODEL
Marking:
Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
31/03/2026
Model:
HOSE202002 1/2” FBSP x 1/2” FBSP x 430mm FLEXIBLE HOSE HOSE202106A 3/4” MBSP X 3/4” FBSP X 1000mm FLEXIBLE HOSE HOSE202109 3/4” MBSP X 3/4” FBSP X 500mm FLEXIBLE HOSE
Approval Holder:
Reliance Worldwide Corporation (UK) Ltd
Company Name
Reliance Worldwide Corporation (UK) Ltd
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company
Manufacturer:
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company
Manufacturer:
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

Print This Approval

#240202085

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240202085
Size:
See Models
Marking:
MF, WRAS and Date of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
MFLEXTC150330, 30cm length MFLEXTC150415, 15cm length MFLEXTC150430, 30cm length MFLEXTC150450, 50cm length MFLEXTC150490, 90cm length MFLEXTC150630, 30cm length MFLEXTC150650, 50cm length MFLEXTC150690, 60cm length MFLEXTC220630, 30cm length MFLEXTC220650, 50cm length MFLEXTC220690, 90cm length MFLEXTC151530, 30cm length MFLEXTC151550, 50cm length MFLEXTC151590, 90cm length MFLEXTC222230, 30cm length MFLEXTC222250, 50cm length MFLEXTC150430M, 30cm length MFLEXTC1504V MFLEXTC1506V MFLEXTC2206V MFLEXTC150415V, 15cm length MFLEXTC1510450V, 50cm length MFLEXTC1510650V, 50cm length MFLEXMTC1004 (suit, Set of 2 type) MFLEXMTC100450, 50cm length(suit, Set of 2 type) MFLEXMTC1204 (suit, Set of 2 type) MFLEXMTC120450 (suit, Set of 2 type) MFLEXMTC1015 (suit, Set of 2 type) MFLEXMTC101550, 50cm length(suit, Set of 2 type) MFLEXMTC1215 (suit, Set of 2 type) MFLEXMTC121550, 50cm length(suit, Set of 2 type) MFLEXTC040430, 30cm length MFLEXTC040450, 50cm length DN8 GMF0813S - M10 short male x 3/8"F captive nut GMF0813L - M10 Long male x 3/8"F captive nut GMF0815S - M10 short male x 1/2"F captive nut GMF0815L - M10 Long male x 1/2"F captive nut GMF0803S - M8 short male x 3/8"F captive nut GMF0823S - M12 short male x 3/8"F captive nut GMF0823L - M12 Long male x 3/8"F captive nut GMF0825S - M12 short male x 1/2"F captive nut GMF0825L - M12 Long male x 1/2"F captive nut DN10 GMF1013S - M10 short male x 3/8"F captive nut GMF1013L - M10 Long male x 3/8"F captive nut GMF1015S - M10 short male x 1/2"F captive nut GMF1015L - M10 Long male x 1/2"F captive nut GMF1023S - M12 short male x 3/8"F captive nut GMF1023L - M12 Long male x 3/8"F captive nut GMF1025S - M12 short male x 1/2"F captive nut GMF1025L - M12 Long male x 1/2"F captive nut DN13 GMF1313S - M10 short male x 3/8"F captive nut GMF1313L - M10 Long male x 3/8"F captive nut GMF1315S - M10 short male x 1/2"F captive nut GMF1315L - M10 Long male x 1/2"F captive nut GMF1323S - M12 short male x 3/8"F captive nut GMF1323L - M12 Long male x 3/8"F captive nut GMF1325S - M12 short male x 1/2"F captive nut GMF1325L - M12 Long male x 1/2"F captive nut GAN series DN8 GAN0833 - 3/8"F x 3/8"F captive nut GAN0835 - 3/8"F x 1/2"F captive nut GAN0855 - 1/2"F x 1/2"F captive nut GAN0877 - 3/4"F x 3/4"F captive nut GAN0857 - 1/2"F x 3/4"F captive nut DN10 GAN1033 - 3/8"F x 3/8"F captive nut GAN1055 - 1/2"F x 1/2"F captive nut GAN1077 - 3/4"F x 3/4"F captive nut DN13 GAN1333 - 3/8"F x 3/8"F captive nut GAN1355 - 1/2"F x 1/2"F captive nut GAN1377 - 3/4"F x 3/4"F captive nut GAM series DN8 GAM0833 - 3/8"M x 3/8"F captive nut GAM0835 - 3/8"M x 1/2"F captive nut GAM0853 - 1/2"M x 3/8"F captive nut GAM0855 - 1/2"M x 1/2"F captive nut GAM0877 - 3/4"M x 3/4"F captive nut DN10 GAM1033 - 3/8"M x 3/8"F captive nut GAM1035 - 3/8"M x 1/2"F captive nut GAM1053 - 1/2"M x 3/8"F captive nut GAM1055 - 1/2"M x 1/2"F captive nut GAM1077 - 3/4"M x 3/4"F captive nut DN13 GAM1333 - 3/8"M x 3/8"F captive nut GAM1335 - 3/8"M x 1/2"F captive nut GAM1353 - 1/2"M x 3/8"F captive nut GAM1355 - 1/2"M x 1/2"F captive nut GAM1377 - 3/4"M x 3/4"F captive nut GMM series DN8 GMM0833 - 3/8"M x 3/8"M GMM0855 - 1/2"M x 1/2"M DN10 GMM1033 - 3/8"M x 3/8"M GMM1055 - 1/2"M x 1/2"M GMM1055 - 1/2"M x 1/2"M DN13 GMM1355 - 1/2"M x 1/2"M GMM1377 - 3/4"M x 3/4"M GEF series DN8 GEF0833 - 3/8"Elbow F x 3/8"F GEF0835 - 3/8"Elbow F x 1/2"F GEF0853 - 1/2"Elbow F x 3/8"F GEF0855 - 1/2"Elbow F x 1/2"F DN10 GEF1055 - 1/2"Elbow F x 1/2"F GEF1057 - 1/2"Elbow F x 3/4"F GEF1077 - 3/4"Elbow F x 3/4"F DN13 GEF1355 - 1/2"Elbow F x 1/2"F GEF1357 - 1/2"Elbow F x 3/4"F GEF1377 - 3/4"Elbow F x 3/4"F GEM series DN8 GEM0833 - 3/8"Elbow F x 3/8"M GEM0835 - 3/8"Elbow F x 1/2"M GEM0853 - 1/2"Elbow F x 3/8"M GEM0855 - 1/2"Elbow F x 1/2"M DN10 GEM1055 - 1/2"Elbow F x 1/2"M GEM1057 - 1/2"Elbow F x 3/4"M GEM1077 - 3/4"Elbow F x 3/4"M DN13 GEM1355 - 1/2"Elbow F x 1/2"M GEM1357 - 1/2"Elbow F x 3/4"M GEM1377 - 3/4"Elbow F x 3/4"M GMC series DN8 GMC0815S - M10 short male x 15mm compression GMC0815L - M10 Long male x 15mm compression GMC0825S - M12 short male x 15mm compression GMC0825L - M12 Long male x 15mm compression DN10 GMC1015S - M10 short male x 15mm compression GMC1015L - M10 Long male x 15mm compression GMC1025S - M12 short male x 15mm compression GMC1025L - M12 Long male x 15mm compression DN13 GMC1315S - M10 short male x 15mm compression GMC1315L - M10 Long male x 15mm compression GMC1325S - M12 short male x 15mm compression GMC1325L - M12 Long male x 15mm compression GAC series DN8 GAC0855 - 15mm compression x 1/2"F captive nut GAC0857 - 15mm compression x 3/4"F captive nut GAC0877 - 22mm compression x 3/4"F captive nut DN10 GAC1053 - 15mm compression x 3/8"F captive nut GAC1055 - 15mm compression x 1/2"F captive nut GAC1057 - 15mm compression x 3/4"F captive nut GAC1077 - 22mm compression x 3/4"F captive nut DN13 GAC1355 - 15mm compression x 1/2"F captive nut GAC1357 - 15mm compression x 3/4"F captive nut GAC1377 - 22mm compression x 3/4"F captive nut GAC1977 - DN19 22mm compression x 3/4"F captive nut GVF series DN8 GVF0855 - 15mm isolating valve x 1/2"F captive nut GVF0877 - 22mm isolating valve x 3/4"F captive nut DN10 GVF1055 - 15mm isolating valve x 1/2"F captive nut GVF1057 - 15mm isolating valve x 3/4"F captive nut GVF1077 - 22mm isolating valve x 3/4"F captive nut DN13 GVF1355 - 15mm isolating valve x 1/2"F captive nut GVF1377 - 22mm isolating valve x 3/4"F captive nut GVF1977 - DN19 22mm isolating valve x 3/4"F captive nut GDC series DN8 GDC0855 - 15mm compression x 15mm compression GDC0877 - 22mm compression x 22mm compression DN GDC1055 - 15mm compression x 15mm compression GDC1077 - 22mm compression x 22mm compression DN13 GDC1355 - 15mm compression x 15mm compression GDC1377 - 22mm compression x 22mm compression DN19 GDC1977 - 22mm compression x 22mm compression GDEF series DN13 GDEF1355 - 1/2"Elbow F x 1/2"Elbow F
Approval Holder:
Masterflow Products Limited
Company Name
Masterflow Products Limited
Address
Globall House 95 Vantage Point West Mindlands
Postcode
DY6 7FT
Country
United Kingdom

View All Listings by this Company

Print This Approval

#240602038

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240602038
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model
Marking:
IL Flessibile logo, WRAS & date of manufacture (MM/YY) on end connections
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
Model Code: FXF2CX.AABBCCCC.DDD FXF2CX Trade Name Explanation: FX = Double interlock hose in brass or stainless steel F = TPS Inner Tube 2: Brass Rubber Holders C: WRAS Approved X: Connection Combinations, where X can be replaced with any of the following: A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x M15x1 F = ½” BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = M15x1 x M15x1 L = M15x1 x 3/8” BSP (M) M = M15x1 x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x M12x1 AABBCCCC.DDD Trade Name Explanation: AA: identifies hose raw material and diameter, which can be replaced with any of the following: AC = Brass CW508L 022 External diameter 14 AD = Brass CW508L 026 External diameter 14 AQ = Brass CW508L 022 External diameter 15 AR = Brass CW508L 026 External diameter 15 AV = Brass CW508L 022 External diameter 17 AW = Brass CW508L 026 External diameter 17 AF = INOX AISI 304 External diameter 14 AS = INOX AISI 304 External diameter 15 AX = INOX AISI 304 External diameter 17 AJ = Brass CW 508L 022 External diameter 12 BB: identifies the type of external finish, and can be replaced with any of the following: CR = Chromed CZ = Brushed Chrome GM = Raw Brass NS = Brushed Nickel NZ = Brushed Nickel Phosphor IG = Raw INOX IS = Brushed INOX PO = PVD Gold PA = PVD Gold Brushed PG = PVD Black Metal PB = PVD Black Metal Brushed PH = PVD Champagne Brushed PR = PVD Copper Bronze PE = PVD Copper Bronze Brushed PI = PVD Grey 07 Brushed PK = PVD High Brass PQ = PVD High Brass Brushed PM = PVD Pale Gold Brushed PC = PVD Rose Gold Family Surface finishes: Raw, Chromed, Electropolished, Polished, Various Galvanics Finishing, Various PVD Finishing, Various Paint Finishing. CCCC: identifies the type of fittings, which can be replaced with any of the following: Any combination of (2) alphanumeric characters denoting only external aesthetic fittings dimensions. All of fittings are unwetted. DDD: identifies the length (between 50 and 200cm), and can be replaced with any of the following as examples: 050 = 50cm length, 100 = 100cm length, 150 = 150cm length, 200 = 200cm length.
Approval Holder:
IL FLESSIBILE di Nicastri e C srl
Company Name
IL FLESSIBILE di Nicastri e C srl
Address
VIA FELICE VEDANI 16 INVORIO
Postcode
28045
Country
Italy
Phone
+39 335 5948283
General Email
g.buratti@ilflessibile.it

View All Listings by this Company
Manufacturer:
IL FLESSIBILE di Nicastri e C srl
Company Name
IL FLESSIBILE di Nicastri e C srl
Address
VIA FELICE VEDANI 16 INVORIO
Postcode
28045
Country
Italy
Phone
+39 335 5948283
General Email
g.buratti@ilflessibile.it

View All Listings by this Company

Print This Approval

#240604017

Range of stainless-steel or nylon braided PEX lined hoses, incorporating EPDM O-ring or gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240604017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN8
Marking:
Company Logo DJ, WRAS and date of manufacture (YYYY-MM) on ferrule.
Installation Requirements:
R001 R008
Expiry date:
30/06/2029
Model:
DJB-A-A-B-*** A - Type of Nut/Connection Fitting -01: M8 -02: M10 -03: M12 -04: M15 -05: F3/8 -06: F1/2 -07: F3/4 -08: F15 -09: M3/8 -10: M1/2 -11: M3/4 -12: G1/2 -13: Quick coupling (M) -14: Quick coupling (F) B - Braiding -01: Stainless steel -02: Nylon ***- Length 10cm-300cm
Approval Holder:
Jiangmen Dijie Sanitary Ware Industrial Co. Ltd.
Company Name
Jiangmen Dijie Sanitary Ware Industrial Co. Ltd.
Address
No. 58 Jinshan East Avenue Shuikou Town Kaiping City Guangdong
Country
China

View All Listings by this Company
Manufacturer:
Jiangmen Dijie Sanitary Ware Industrial Co. Ltd.
Company Name
Jiangmen Dijie Sanitary Ware Industrial Co. Ltd.
Address
No. 58 Jinshan East Avenue Shuikou Town Kaiping City Guangdong
Country
China

View All Listings by this Company

Print This Approval

#240604021

Range of stainless steel braided TPSiV lined flexible hose assemblies incorporating EPDM O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240604021
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
Tucai, WRAS, Date of manufacture: TB-YY/DDD etched on crimp connection
Installation Requirements:
R001 R008
Expiry date:
30/06/2029
Model:
206525 TAQ FLX DN6 HG 3838 3/8” BSP (F) captive nut x 3/8” BSP (F) captive nut 208895 TAQ FLX CODO HG 3838 3/8” BSP (F) captive nut x 3/8” BSP (F) elbow incorporating captive nut
Approval Holder:
Tucai SA
Company Name
Tucai SA
Address
Llobateras 10-12, Poligomo Industrial Santiga, 08210 Barbera Del Valles (Barcelona)
Country
Spain
Phone
+34 93 718 9562

View All Listings by this Company
Manufacturer:
Tucai Bulgaria SP Ltd.
Company Name
Tucai Bulgaria SP Ltd.
Address
7538 Aydemir Village 39 Chernozem Street Silistra Region
Country
Bulgaria

View All Listings by this Company

Print This Approval

#240602042

Range of chromium plated interlocked, PEX lined shower hoses with EPDM rubber gaskets. Maximum operating pressure: 6.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240602042
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
7/8-20 UNEF-2B
Marking:
CHG, KW50 or KCW50 (depending on model), Year of production (20xx) and WRAS on ferrule.
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
KCW50-Y010-XX, KW50-Y010-XX. Where XX denotes the length and can be replaced with any of the following: 20 = 20” length 26 = 26” length 32 = 32” length 44 = 44” length
Approval Holder:
CHG Europe B.V.
Company Name
CHG Europe B.V.
Postcode
THE NETHERLANDS

View All Listings by this Company

Print This Approval

#2103349

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2103349
Size:
DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:
Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
31/03/2026
Model:
316637 15MMXM10X30CM DN8 898868 15MMXM12X30CM DN10 122259 F3/8”X15MM X 30CM DN10 500898 F1/2”X15MM X 30CM DN10 500903 F1/2”X15MM X 50CM DN10 114103 F1/2”X15MM X 100CM DN10 695025 F3/4”X15MM X 30CM DN10 897397 F3/4”X15MM X 50CM DN10 509861 F3/4”X15MM X 100CM DN10 313144 15MM X15MM X 30CM DN10 508022 15MM X15MM X 50CM DN10 509802 15MM X15MM X100CM DN10 506150 F3/4”X22MM X 30CM DN13 507681 F3/4”X22MM X 50CM DN13 116063 F3/4”X22MM X 100CM DN13 316628 22MM X22MM X 30CM DN13 316600 22MM X22MM X 50CM DN13 699046 F1/2”X15MM ISO VALVE X 30CM DN10 307096 F1/2”X15MM ISO VALVE X 50CM DN10 306887 F3/4”X22MM ISO VALVE X 30CM DN13 897436 F3/4”X22MM ISO VALVE X 50CM DN13
Approval Holder:
Travis Perkins PLC
Company Name
Travis Perkins PLC
Address
Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval

#240202092

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240202092
Size:
See Models
Marking:
Brymec, Size, PN, WRAS and Date of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
DN10 30909 50cm length & 30925 30cm length - 15mm compression x 1/2"F captive nut 30911 50cm length & 30917 30cm length - 15mm compression x 3/4"F captive nut DN13 30904 50cm length & 30913 30cm length - 15mm compression x 1/2"F captive nut 30927 15mm compression x 3/4"F captive nut 30942 50cm length & 30928 30cm length - 22mm compression x 3/4"F captive nut 30903 DN19 22mm compression x 3/4"F captive nut DN10 30924 - 15mm isolating valve x 1/2"F captive nut DN13 30921- 22mm isolating valve x 3/4"F captive nut 30934 50cm length & 30926 30cm length - 15mm compression x 15mm compression DN13 30945 50cm length & 30932 30cm length- 22mm compression x 22mm compression
Approval Holder:
Brymec Ltd
Company Name
Brymec Ltd
Address
Redlands , Coulsdon, Surrey
Postcode
CR5 2HT
Country
United Kingdom
General Email
Jeremy.douglas@brymec.com

View All Listings by this Company

Print This Approval

#2103350

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2103350
Size:
DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:
Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
31/03/2026
Model:
316637 15MMXM10X30CM DN8 898868 15MMXM12X30CM DN10 122259 F3/8”X15MM X 30CM DN10 500898 F1/2”X15MM X 30CM DN10 500903 F1/2”X15MM X 50CM DN10 114103 F1/2”X15MM X 100CM DN10 695025 F3/4”X15MM X 30CM DN10 897397 F3/4”X15MM X 50CM DN10 509861 F3/4”X15MM X 100CM DN10 313144 15MM X15MM X 30CM DN10 508022 15MM X15MM X 50CM DN10 509802 15MM X15MM X100CM DN10 506150 F3/4”X22MM X 30CM DN13 507681 F3/4”X22MM X 50CM DN13 116063 F3/4”X22MM X 100CM DN13 316628 22MM X22MM X 30CM DN13 316600 22MM X22MM X 50CM DN13 699046 F1/2”X15MM ISO VALVE X 30CM DN10 307096 F1/2”X15MM ISO VALVE X 50CM DN10 306887 F3/4”X22MM ISO VALVE X 30CM DN13 897436 F3/4”X22MM ISO VALVE X 50CM DN13
Approval Holder:
The Highbourne Group, City Plumbing Supplies
Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company
Manufacturer:
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company
Manufacturer:
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

Print This Approval

#2103351

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2103351
Size:
DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:
Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
31/03/2026
Model:
29030007 F1/2" X F1/2”X 30CM DN10 29030008 F3/4" X F3/4”X 30CM DN13 29030011 F3/8”X15MM X 30CM DN10 29030020 F1/2”X15MM X 30CM DN10 29030065 F1/2”X15MM X 50CM DN10 29030101 F1/2”X15MM X 90CM DN10 29030104 F1/2”X15MM X 100CM DN10 29030119 F3/4”X15MM X 30CM DN10 29030137 F3/4”X15MM X 50CM DN10 29030141 F3/4”X15MM X 100CM DN10 29030236 15MM X15MM X 30CM DN10 29030272 15MM X15MM X 50CM DN10 10000201 15MM X15MM X 100CM DN10 29030245 15MM X15MM X 30CM DN13 29030281 15MM X15MM X 50CM DN13 29030029 F1/2”X15MM X 30CM DN13 29030074 F1/2”X15MM X 50CM DN13 29030110 F1/2”X15MM X 100CM DN13 29030155 F3/4”X22MM X 30CM DN13 29030191 F3/4”X22MM X 50CM DN13 29030218 F3/4”X22MM X 90CM DN13 29030221 F3/4”X22MM X 100CM DN13 29030128 F3/4”X15MM X 30CM DN13 29030146 F3/4”X15MM X 50CM DN13 29030290 22MM X22MM X 30CM DN13 10000202 22MM X22MM X 50CM DN13 29030047 F1/2”X15MM ISO VALVE X 30CM DN10 29030083 F1/2”X15MM ISO VALVE X 50CM DN10 29030254 15MM X15MM ISO VALVE X 30CM DN10 29030182 F3/4”X22MM ISO VALVE X 30CM DN13 29030209 F3/4”X22MM ISO VALVE X 50CM DN13 29030400 F1/2”X15MM PUSHFIT X 30CM DN10 29030402 F1/2”X15MM PUSHFIT X 50CM DN10 29030404 F3/4”X15MM PUSHFIT X 30CM DN10 29030406 F3/4”X22MM PUSHFIT X 30CM DN13 29030408 F1/2”X15MM PUSHFIT WITH ISO VALVE X 30CM DN10 29030410 15MM PUSHFIT X15MM PUSHFIT X 30CM DN10 29030164 F3/4”X22MM X 30CM DN19 29030200 F3/4”X22MM X 50CM DN19 29030227 F3/4”X22MM X 90CM DN19 29030308 15MM X 10MMX30CM DN8 29030317 15MM X 12MMX30CM DN10
Approval Holder:
Primaflow F & P
Company Name
Primaflow F & P
Address
Votec House, Hambridge Lane, Newbury
Postcode
RG14 5TN
Country
United Kingdom

View All Listings by this Company
Manufacturer:
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684

View All Listings by this Company
Manufacturer:
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684

View All Listings by this Company

Print This Approval

#240502056

Range of stainless-steel braided EPDM lined flexible hose assemblies. Compression connections are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240502056
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
F3/8: ⅜” captive nut, F3/8 elbow: ⅜” captive nut (elbow), F1/2: ½” captive nut, F1/2 elbow: ½” captive nut (elbow), F3/4: ¾” captive nut, F3/4 elbow: ¾” captive nut (elbow), M8x1: M8x1, M10x1: M10x1, M12x1: M12x1, M3/8: ⅜” BSP (M), M1/2: ½” BSP (M), M3/4: ¾” BSP (M), T10: 10mm fitting with plain and short smooth tube with recess, 10MM: 10mm compression, 12MM: 12mm compression, 14MM: 14mm compression, 16MM: 16mm compression.
Marking:
AMG logo (‘AMG’), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
30/04/2027
Model:
AMG-E-SS-F3/8-F3/8-DN8, AMG-E-SS-F3/8-M1/2-DN8, AMG-E-SS-F3/8-M8X1-DN8, AMG-E-SS-F3/8-M10X1-DN8, AMG-E-SS-F3/8-M12X1-DN8, AMG-E-SS-F3/8-M3/8-DN8, AMG-E-SS-F3/8-F3/8 elbow-DN8, AMG-E-SS-F1/2-F3/8-DN8, AMG-E-SS-F1/2-F1/2-DN8, AMG-E-SS-F1/2-M1/2-DN8, AMG-E-SS-F1/2-M8X1-DN8, AMG-E-SS-F1/2-M10X1-DN8, AMG-E-SS-F1/2-M12X1-DN8, AMG-E-SS-F1/2-M3/8-DN8, AMG-E-SS-F1/2-F1/2 elbow-DN8, AMG-E-SS-F3/4-F3/4-DN8, AMG-E-SS-F3/4-M1/2-DN8, AMG-E-SS-F3/4-M3/4-DN8, AMG-E-SS-F3/4-F3/4 elbow-DN8, AMG-E-SS-M1/2-F1/2 elbow-DN8, AMG-E-SS-M3/4-F3/4 elbow-DN8, AMG-E-SS-M3/8-F3/8 elbow-DN8, AMG-E-SS-F3/8-T10-DN8, AMG-E-SS-F3/8-10MM-DN8, AMG-E-SS-F3/8-12MM-DN8, AMG-E-SS-F1/2-T10-DN8, AMG-E-SS-F1/2-10MM-DN8, AMG-E-SS-F1/2-12MM-DN8, AMG-E-SS-F1/2-14MM-DN8, AMG-E-SS-F3/4-16MM-DN12, AMG-E-SS-M1/2-10MM-DN8, AMG-E-SS-M1/2-12MM-DN8, AMG-E-SS-M1/2-14MM-DN8, AMG-E-SS-M3/8-10MM-DN8, AMG-E-SS-M3/8-12MM-DN8, AMG-E-SS-F3/4-F3/4-DN10, AMG-E-SS-F1/2-F1/2-DN10, AMG-E-SS-F1/2-M1/2-DN10, AMG-E-SS-F3/8-M10X1-DN10, AMG-E-SS-F3/8-M12X1-DN10, AMG-E-SS-F1/2-F1/2 elbow-DN10, AMG-E-SS-F3/4-M1/2-DN10, AMG-E-SS-F3/4-M3/4-DN10, AMG-E-SS-F3/4-F3/4 elbow-DN10, AMG-E-SS-F1/2-M10X1-DN10, AMG-E-SS-F1/2-M12X1-DN10, AMG-E-SS-M1/2-F1/2 elbow-DN10, AMG-E-SS-M3/4-F3/4 elbow-DN10, AMG-E-SS-F3/4-F3/4-DN12, AMG-E-SS-F1/2-F1/2-DN12, AMG-E-SS-F3/4-M3/4-DN12, AMG-E-SS-F3/4-F3/4 elbow-DN12, AMG-E-SS-M1/2-F1/2 elbow-DN12, AMG-E-SS-M3/4-F3/4 elbow-DN12, AMG-E-SS-F3/4-M1/2-DN12, AMG-E-SS-F1/2-F1/2 elbow-DN12.
Approval Holder:
Yuhuan AMG Just Valve Co., Ltd
Company Name
Yuhuan AMG Just Valve Co., Ltd
Address
M&E Industrial Zone, Yuhuan, Zhejiang
Postcode
317600
Country
China
Phone
86 576 87281908
General Email
export@amg.com.cn

View All Listings by this Company
Manufacturer:
Yuhuan AMG Just Valve Co., Ltd
Company Name
Yuhuan AMG Just Valve Co., Ltd
Address
M&E Industrial Zone, Yuhuan, Zhejiang
Postcode
317600
Country
China
Phone
86 576 87281908
General Email
export@amg.com.cn

View All Listings by this Company

Print This Approval

#240704012

Range of stainless steel or nylon braided EPDM lined flexible hose assemblies with various brass end connections. Compression connection to be used with copper pipe EN1057. Maximum working pressure 10 Bar. Maximum operating temperature 70°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240704012
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
Lux, WRAS, Date of Manufacture (YY), PN&DN stamped on crimped connector
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
Bore diameter – DN6 Male M8, M10, M11, 3/8" BSP Male M15x1 swivel Female w/gasket 9/16” UNEF/UNEF (H.N.), 1/2” BSP, 3/8” BSP Female 3/8” BSP, 1/2” BSP Bore diameter – DN8 Male M10, M11, M12, 3/8" BSP Male M15x1 swivel Female w/gasket 9/16” UNEF/UNEF (H.N.), 1/2” BSP, 3/8” BSP Female 3/8” BSP, 1/2” BSP Female 1/2” BSP female with swivel conical nut and o-ring Female Elbow 1/4” BSP, 3/8” BSP Female Elbow 3/8” BSP w/gasket Compression 15mm Plug in 10mm (with 2 'O'-rings) Bore diameter – DN10 Male M12, 3/8" BSP, 1/2” BSP Female w/gasket 1/2” BSP, 3/8” BSP, 3/4” BSP Female 1/2” BSP Female Elbow 1/2” BSP, 3/4” BSP Female Elbow 1/2” BSP w/gasket, 3/4” BSP w/gasket Compression 15mm Plug in elbow 18.6mm Straight Plug in 17mm Bore diameter – DN13 Male 1/2” BSP, 3/4" BSP Female w/gasket 1/2” BSP, 3/4” BSP Female 3/4"BSP Female Elbow 1/2” BSP, 3/4” BSP Female Elbow 1/2” BSP w/gasket, 3/4” BSP w/gasket Compression 15mm Plug in 12mm, 15mm, 29mm, 29mm long Plug in elbow 18mm, 23.6mm, 28mm
Approval Holder:
LUXOR S.p.A.
Company Name
LUXOR S.p.A.
Address
Via Madonnina, 94 Montichiari (BS)
Postcode
25018
Country
Italy
Phone
+39 030 9961161
General Email
marco.cauzzi@luxor.it

View All Listings by this Company
Manufacturer:
LUXOR S.p.A.
Company Name
LUXOR S.p.A.
Address
Via Madonnina, 94 Montichiari (BS)
Postcode
25018
Country
Italy
Phone
+39 030 9961161
General Email
marco.cauzzi@luxor.it

View All Listings by this Company

Print This Approval

#241002078

Nylon and stainless-steel braided EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241002078
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to models.
Marking:
Hualing logo, WRAS and date of manufacture (YYYY) on ferrule
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
HL-SS-XX-XX-XXX-XXX SS=Stainless Steel Braided Hose XX: Connection sizes: 01=F3/8 02=F1/2 03=F3/4 04=F15*1 05=M3/8 06=M1/2 07=M3/4 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm ID or 11mm OD Note: Connection 01, 02, 04, 05, 06, 08, 09, 10, 11, 12 applicable for DN6. Connection 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 applicable for DN8. Connection 01, 02, 03, 04, 05, 06, 07, 08 applicable for DN10. Connection 02, 03, 06, 07 applicable for DN14. 1st XXX: Hose inner size: 006= DN6, 008= DN8, 010= DN10, 014= DN14. 2nd XXX: Hose length: 15CM - 200CM. HL-N-XX-XX-XXX-XXX N=Nylon Pull out Hose. XX: Connection sizes: 01=F3/8 02=F1/2 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm OD 1st XXX: Hose inner size: 006= DN6, 008= DN8. 2nd XXX: Hose length: 15CM - 200CM.
Approval Holder:
Kaiping City Hualing Hoses Co Ltd
Company Name
Kaiping City Hualing Hoses Co Ltd
Address
No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province
Country
CHINA

View All Listings by this Company
Manufacturer:
Kaiping City Hualing Hoses Co Ltd
Company Name
Kaiping City Hualing Hoses Co Ltd
Address
No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province
Country
CHINA

View All Listings by this Company

Print This Approval

#240704037

Range of stainless steel braided hoses with EPDM liner and NBR or fibre gaskets. DN13 and DN19 Maximum working pressure 10 bar. Maximum operating temperature 65°C. DN25 Maximum working pressure 10 bar. Cold water use only.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240704037
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
APL, Date of manufacture (YYYY) and WRAS stamped on ferrule.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
H786 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.5m H782 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.25m H783 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.0m H784 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.75m H785 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.5m H980 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.5m H979 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.25m H978 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.0m H977 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.75m H976 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.5m H775 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.5m H769 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.25m H772 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.0m H773 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.75m H774 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.5m H981 19mm stainless steel braided hose 3/4" F BENT x 3/4” F BENT 1.5m H829 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.25m H830 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.0m H831 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.75m H832 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.5m H984 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.5m H767 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.25m H833 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.0m H768 25mm stainless steel braided hose 1” F STR x 1” F BENT 0.75m H989 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.5m H988 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.25m H987 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.0m H986 25mm stainless steel braided hose 1” F BENT x 1” F BENT
Approval Holder:
Aquamatic Products Limited
Company Name
Aquamatic Products Limited
Address
3A & 3B Dakota Business Park, Dakota Way, Burscough, West Lancashire
Postcode
L40 8AF

View All Listings by this Company
Manufacturer:
Aquamatic Products Limited
Company Name
Aquamatic Products Limited
Address
3A & 3B Dakota Business Park, Dakota Way, Burscough, West Lancashire
Postcode
L40 8AF

View All Listings by this Company

Print This Approval

#2211708

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. SCFA models incorporate a spherical valve. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2211708
Size:
see model
Marking:
South Coast Sales Logo, WRAS and date of manufacture YYYY on crimp connection.
Installation Requirements:
R001
Expiry date:
30/11/2027
Model:
½“ compression x ½" (F) BSP captive nut: EMBW130, length 30cm EMBW150, length 50cm - DN8 ¾“ compression x ¾" (F) BSP captive nut: EMBW530, length 30cm EMBW550, length 50cm - DN13
Approval Holder:
South Coast Sales
Company Name
South Coast Sales
Address
1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.
Postcode
T12 TR62
Country
Ireland
Phone
00353 21 - 43 46 143
General Email
info@southcoastsales.com

View All Listings by this Company

Print This Approval

#240602065

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240602065
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model
Marking:
Dolphin logo on end connections
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
Model Code: Dolphin Blue DB30abb.ccc.d.eee a’ indentifies the material type of the metal interlocked hose and threaded end connectors; these codes can be: o DB303bb. for brass material o DB304bb. for stainless steel material  ‘bb’ identifies the type of fitting/threaded connector at either end of the hose ranging from DB30a1. to DB30a11. Can be either one or two digits.  ‘ccc’ identifies the length range of the metal interlocked hose from 500mm ‘DB30abb.050’ to 2000mm ‘DB30abb.200’  ‘d’ identifies the external finish to the metal parts from ‘DB30abb.ccc.1 to DB30ab.ccc.9’: o ‘.1’ denotes brushed/satin polished o ‘.2’ denotes mirror polished o ‘.3’ denotes brushed/satin polished with PVD coating o ‘.4’ denotes mirror polished with PVD coating o ‘.5’ denotes powder coated o ‘.6 - .9’ to denote other material and finish options that may be available in the future  ‘eee’ indicates the colour of PVD or powder coat that has been applied from ‘DB30abb.ccc.d.00’ to ‘DB30abb.ccc.d.999’. Can be either two or three digits.
Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval

#240602069

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240602069
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model
Marking:
SHS on end connections.
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
V165W-XX 1/2" Female Connection D17, V940W-XX 1/2" Female Connection D17, V941W-XX 1/2" Female Connection D17, V942W-XX 1/2" Female Connection D17. FXF2CX Trade Name Explanation: FX = Double interlock hose in brass or stainless steel F = TPS Inner Tube 2: Brass Rubber Holders C: WRAS Approved X: Connection Combinations, where X can be replaced with any of the following: A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x M15x1 F = ½” BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = M15x1 x M15x1 L = M15x1 x 3/8” BSP (M) M = M15x1 x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x M12x1 AABBCCCC.DDD Trade Name Explanation: AA: identifies hose raw material and diameter, which can be replaced with any of the following: AC = Brass CW508L 022 External diameter 14 AD = Brass CW508L 026 External diameter 14 AQ = Brass CW508L 022 External diameter 15 AR = Brass CW508L 026 External diameter 15 AV = Brass CW508L 022 External diameter 17 AW = Brass CW508L 026 External diameter 17 AF = INOX AISI 304 External diameter 14 AS = INOX AISI 304 External diameter 15 AX = INOX AISI 304 External diameter 17 AJ = Brass CW 508L 022 External diameter 12 BB: identifies the type of external finish, and can be replaced with any of the following: CR = Chromed CZ = Brushed Chrome GM = Raw Brass NS = Brushed Nickel NZ = Brushed Nickel Phosphor IG = Raw INOX IS = Brushed INOX PO = PVD Gold PA = PVD Gold Brushed PG = PVD Black Metal PB = PVD Black Metal Brushed PH = PVD Champagne Brushed PR = PVD Copper Bronze PE = PVD Copper Bronze Brushed PI = PVD Grey 07 Brushed PK = PVD High Brass PQ = PVD High Brass Brushed PM = PVD Pale Gold Brushed PC = PVD Rose Gold Family Surface finishes: Raw, Chromed, Electropolished, Polished, Various Galvanics Finishing, Various PVD Finishing, Various Paint Finishing. CCCC: identifies the type of fittings, which can be replaced with any of the following: Any combination of (2) alphanumeric characters denoting only external aesthetic fittings dimensions. All of fittings are unwetted. DDD: identifies the length (between 50 and 200cm), and can be replaced with any of the following as examples: 050 = 50cm length, 100 = 100cm length, 150 = 150cm length, 200 = 200cm length.
Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval

#240902006

Stainless steel interlocked (chrome plated) silicone lined kitchen tap pull-out hose. Open outlet use only. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240902006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
M12 x M12.
Marking:
Dornbracht on ferule.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
04300212000
Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval

#240988004

Range of stainless steel inter-locked shower hoses incorporating PVC linings in various finishes. Maximum operating temperature 65°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240988004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only
Size:
See model
Marking:
PPI, WRAS & year of manufacture (yyyy) on ferrule
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
SHS(D)(C)-A-B-L-F (SHS(08/10)(P/B/S)–Connection A - Connection B– Length - different finish) SHS – The name of our Stainless Steel Shower Tube D(08/10) – 08=DN8 or 10=DN10 C(P/B/S) – P=Plastics Core Only DN8, B=Brass Core or S=Stainless Steel Core A-B – Connection A and Connection B (from 01 to 10) 01 = F1/2 knurled nut, 02 = F1/2 hex nut , 03 = F1/2 Conical Connection Shell knurled nut, 04 = F1/2 Conical Connection Housing with O-ring nut, 05 = F1/2 Conical Connection Shell without O-ring nut, 06 = F1/2 Conical Connection, 07 = T connection, 08 = M15×1 connection, 09 = M22×1connection（L=20-30）and 10=F1/2 cone-shaped connection anti winding (Connections 01, 02, 04, 05, 06, 07, 08, 09 & 10 applicable for DN8 hoses and Connection 01, 02, 03 & 06 applicable for DN10 hoses) L (XXX) Length (15cm to 200cm): 015=15cm 200=200cm F (XXX) different finish (Chrome Finish No suffix), Chrome = No suffix, Brushed brass = BGP, PVD Gold = PVD, Brushed Nickel = BN1, Gun Metal = GMG and Electrolytic Polished = EP1 For example: "SHS08B-01-04-150 would be DN8, Brass Core,F1/2 x F1/2 Conical Connection Housing with O-ring nut , 150cm long, Chrome Finish" and "SHS10S-01-05-150-PVD would be DN10,Stainless Steel Core,F1/2 xF1/2 Conical Connection Shell without O-ring nut, 150cm long, PVD Gold Finish."
Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval

#250102002

Range of EPDM hoses with either nylon or stainless-steel braiding, with or without a PVC sheath. Some models incorporate isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
250102002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models below
Marking:
Shida logo, Wras and date of manufacture (YYYY) on hose ferrule. Flow arrow on isolation valve.
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
SD-DD-01 (Stainless-steel braided – no sheath): Size: DN6 - F3/8, F1/2, M8X1, M8X1.25, M10X1, F15X1, M15X1. Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm, 15mm valve, 22mm, 22mm valve, F15X1, M15X1. Size: DN10 - F1/2, F3/4, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve. Size: DN13 - F1/2, F3/4, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve. SD-DD-02 (Nylon braided – no sheath) Size: DN6 - F3/8, F1/2, M8X1, M8X1.25, M10X1, F15X1, M15X1. Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1. SD-DD-03 (stainless-steel braided with PVC Sheath) Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1. SD-DD-04 (nylon braided with PVC Sheath) Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25 M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1
Approval Holder:
Zhejiang Shida Pipe Co. Ltd
Company Name
Zhejiang Shida Pipe Co. Ltd
Address
Chumen Technology Industrial Zone, Wujia District, Yuhuan City, Chumen Yuhuna
Country
China
General Email
76991784@qq.com

View All Listings by this Company

Print This Approval

#241002025

Range of elastomeric shower hoses with EPDM lining and ‘O’-rings. The product incorporates a flow restrictor. Maximum operating temperature 60.0°C Open outlet use only

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241002025
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP (F)
Marking:
Hansgrohe logo on flow control (models 28 249 xx0 & 28 248 xx0 AXOR logo on flow control (all other models)
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
AXOR 28 127 xx0 28 128 xx0 30 246 018 Hansgrohe 28 249 xx0 28 248 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval

#241002059

Range of stainless-steel braided flexible hose assemblies incorporating EPDM inner and plastic (BFSFH12-EE80/150) or brass (BFSFH19-EE60) captive nut end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241002059
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4” BSP X 3/4” BSP ELBOW.
Marking:
MIDBRASS®, WRAS and Year of manufacture (YYYY).
Installation Requirements:
R001 R008
Expiry date:
31/10/2029
Model:
BFSFH12-EE80, BFSFH19-EE60 & BFSFH12-EE150.
Approval Holder:
Navigator MSL Ltd.
Company Name
Navigator MSL Ltd.
Address
Mill Road, Sharnbrook, Beds.
Postcode
MK44 1NP
Phone
01234 781234
General Email
sales@navigatormsl.com

View All Listings by this Company

Print This Approval

#240402081

Range of stainless steel braided, EPDM lined flexible hose assemblies with a variety of end connections (see models for full breakdown), including EPDM washers and ‘O’-rings where applicable. Some models are supplied with screwdriver operated isolation valves (see model list). All compression and push-fit fittings are to be used with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16 bar. Maximum operating temperature: 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240402081
Size:
See model
Marking:
Kingfisher, WRAS and year of manufacture (YYYY) on ferrule
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
5063022590244 - ½” BSP (F) x 15mm comp iso valve, DN10 5063022590213 - ¾” BSP (F) x 22mm comp iso valve, DN13 5063022590237- ¾” BSP (F) x 15mm comp, DN10 5063022590206 - ¾” BSP (F) x 15mm comp iso valve, DN10 5063022590220 - ½” BSP (F) x 15mm comp, DN13
Approval Holder:
Kingfisher International Products Ltd
Company Name
Kingfisher International Products Ltd
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval

#241004018

Range of stainless steel interlocked shower hoses with EPDM O-rings. Maximum operating temperature 65°C. Open outlet use only.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241004018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
NB-OGH, WRAS etched on ferrule
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
SS-A-A-**-** Shower hose (interlocked) ½” BSP(F) captive nut A - Type of Nut/Connection Fitting 1 Conic nut smooth 2 Conic nut with o-ring 3 Conic nut knurl 4 Ball nut 5 Zig nut 6 Knurl nut Note 1: ** - Length 30cm-300cm Note 2: ** Denotes different finishes CP Chrome plated BN Brushed Nickel MB Matte Black ORB Oil Rubber Bronze EP Polish KH2002-A-**-** Shower hose (interlocked) M15*1 A - Type of Nut/Connection Fitting 1 Conic nut smooth 2 Conic nut with o-ring 3 Conic nut knurl Note 1: ** - Length 30cm-300cm Note 2: ** Denotes different finishes CP Chrome plated BN Brushed Nickel MB Matte Black ORB Oil Rubber Bronze EP Polish
Manufacturer:
Yuyao Ou Gao Hose Co.,Ltd.
Company Name
Yuyao Ou Gao Hose Co.,Ltd.
Address
No.1, Second Road, Industrial West Zone, Nanlei Village, Lubu Town, Yuyao City, Ningbo City, Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval

#241015012

Range of stainless steel or black nylon braided EPDM lined flexible hose assemblies with EPDM washers and/or ‘O’-rings, and brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241015012
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model
Marking:
Jinshou, WRAS and date of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
JS-EPDM-01 series Bore diameters: DN6, DN8. End connections: M8*1, M10*1, F½".
Approval Holder:
Taizhou Jinshou Plumbing Fittings Co. Ltd.
Company Name
Taizhou Jinshou Plumbing Fittings Co. Ltd.
Address
SHANGSHAN INDUSTRIAL ZONE QINGGANG TOWN YUHUAN COUNTY
Country
CHINA

View All Listings by this Company
Manufacturer:
Taizhou Jinshou Plumbing Fittings Co. Ltd.
Company Name
Taizhou Jinshou Plumbing Fittings Co. Ltd.
Address
SHANGSHAN INDUSTRIAL ZONE QINGGANG TOWN YUHUAN COUNTY
Country
CHINA

View All Listings by this Company

Print This Approval

#241012002

Stainless steel braided or nylon braided PEX lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 Bar Maximum operating temperature 85 °C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241012002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model
Marking:
Haodi, WRAS & year (YYYY) of manufacture on ferrule.
Installation Requirements:
R001 R008
Expiry date:
31/10/2029
Model:
PEX-A-B-C-B-C-D-XXX A Outer Braiding SS Stainless Steel Braided NP Nylon Braided B Connection Material BR Brass SS Stainless Steel C Connection Size M8 M10 M12 M13 M14 F14 M15 F15 M3/8 F3/8 M1/2 F1/2 M9/16 F9/16 M3/4 F3/4 D Hose Size 006 DN6 008 DN8 010 DN10 XXX Length (mm) 150-1500
Manufacturer:
Kaiping Haodi Sanitary Ware Technology Co., Ltd
Company Name
Kaiping Haodi Sanitary Ware Technology Co., Ltd
Address
Block 1, No. 25 Jiaxing North Road, Shuikou Town, Kaiping, Guangdong
Country
China

View All Listings by this Company

Print This Approval

#241012003

Stainless steel braided or nylon braided PEX lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 Bar Maximum operating temperature 85 °C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241012003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model
Marking:
KITA, PEX, DATE OF MANUFACTURE YYYY & WRAS ON CRIMPED CONNECTION
Installation Requirements:
R001 R008
Expiry date:
31/10/2029
Model:
KITA PEX-A-B-C-B-C-D-XXX A Outer Braiding SS Stainless Steel Braided NP Nylon Braided B Connection Material BR Brass SS Stainless Steel C Connection Size M8 M10 M12 M13 M14 F14 M15 F15 M3/8 F3/8 M1/2 F1/2 M9/16 F9/16 M3/4 F3/4 D Hose Size 006 DN6 008 DN8 010 DN10 XXX Length (mm) 150-1500
Approval Holder:
Ka Shing Enterprises (H.K) Ltd
Company Name
Ka Shing Enterprises (H.K) Ltd
Address
Flat A, 3/F Waylee Industry Center 30-38 Tsuen King Circuit Tsuen Wan
Country
Hong Kong

View All Listings by this Company

Print This Approval

#2203069

Range of stainless steel braided, PEX lined flexible hose assemblies with a variety of end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2203069
Size:
see model
Marking:
PESEN, WRAS, manufacture date (YYYY) on the ferrule
Installation Requirements:
R001 R008
Expiry date:
31/03/2027
Model:
DN8 1/2F*3/8F
Approval Holder:
PESEN TEL ORGU SAN. VE TIC. LTD. STI.
Company Name
PESEN TEL ORGU SAN. VE TIC. LTD. STI.
Address
IKITELLI OSB DERSAN SAN SIT TRIOS B-120 BASAKSEHIR-ISTANBUL
Country
Turkey

View All Listings by this Company

Print This Approval

#240202094

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240202094
Size:
See Models
Marking:
Kingfisher, Size, PN, WRAS and Date of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
DN8 5052931462728 - M10 short male x 15mm compression - M10 Long male x 15mm compression 5052931462834 - M12 short male x 15mm compression 5052931462834 - M12 Long male x 15mm compression DN10 5052931462827 - 15mm compression x 3/8"F captive nut 5052931462636 (Length 300mm) - 15mm compression x 1/2"F captive nut 5052931462803 (Length 500mm) - 15mm compression x 1/2"F captive nut 5052931462704 (Length 900mm) - 15mm compression x 1/2"F captive nut 5052931462810 (Length 300mm) - 15mm compression x 3/4"F captive nut 5052931462858 (Length 500mm) - 15mm compression x 3/4"F captive nut 5052931462865 (Length 900mm) - 15mm compression x 3/4"F captive nut DN13 5052931462711 (Length 300mm) - 15mm compression x 1/2"F captive nut 5052931462797 (Length 500mm) - 15mm compression x 1/2"F captive nut 5052931462698 (Length 900mm) - 15mm compression x 1/2"F captive nut 5052931462643 (Length 300mm) - 22mm compression x 3/4"F captive nut 5052931462674 (Length 500mm) - 22mm compression x 3/4"F captive nut 5052931462681 (Length 900mm) - 22mm compression x 3/4"F captive nut GAC1977 - DN19 22mm compression x 3/4"F captive nut DN10 50052931462650 (Length 300mm) - 15mm isolating valve x 1/2"F captive nut 5052931462735 (Length 500mm) - 15mm isolating valve x 1/2"F captive nut 552931462759 (Length 300mm) - 15mm isolating valve x 3/4"F captive nut 5052931462773 (Length 500mm) - 15mm isolating valve x 3/4"F captive nut DN13 5052931462667 (Length 300mm) - 22mm isolating valve x 3/4"F captive nut 5052931462742 (Length 500mm) - 22mm isolating valve x 3/4"F captive nut DN8 - 15mm compression x 15mm compression 5052931462629 (Length 300mm) 5052931462841 (Length 500mm) 5052931462629 (Length 300mm)
Approval Holder:
Kingfisher International Products Ltd
Company Name
Kingfisher International Products Ltd
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval

#241102026

Range of stainless steel braided, TPSiv lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241102026
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” (M) or 3/8” captive nut elbow end connections
Marking:
NEOFLEX, DoM (MMYY), max temp, max pressure and WRAS on ferrule.
Installation Requirements:
R001 R008
Expiry date:
30/11/2029
Model:
DN8 - Ultraflex TPSiv, DN8 - Neoflex TPSiv.
Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl Italia Srl & Neoperl Bulgaria EOOD
Company Name
Neoperl Italia Srl & Neoperl Bulgaria EOOD
Address
Via Velleia 19, 20900 Monza (MI)
Country
Italy
General Email

View All Listings by this Company

Print This Approval

#240988024

Range of stainless steel inter-locked shower hoses incorporating PVC linings in various finishes. Maximum operating temperature 65°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240988024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only
Size:
See model
Marking:
NABIS on ferrule
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
A05052* NAB 1.5M - 11MM BORE - SHOWER HOSE A05053* NAB 1.75M - 11MM BORE - SHOWER HOSE
Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 2 of 3

© WRAS 2026 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.