Range of five hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork controlling the flow to the shower handset and two quarter turn ceramic disc headworks controlling the flow to the spout outlet, all with single lever operating members. The spout outlets incorporate a plastic aerator. The inlet to the shower handsets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2012704

Size:

Stainless steel braided PE-X lined flexible hose with EPDM rubber washer and 1/2" captive nut end connection

Marking:

Vola on side of operating member.

Installation Requirements:

R001 R009 R010 R040

Expiry date:

31/12/2025

Model:

VOLA BK11 & VOLA BK13 (Mixer Complete with Adjustable bracket and water collection box), VOLA BK11A & VOLA BK13A (Mixer with Bracket), VOLA BK11B & VOLA BK13B (Mixer alone). Available with stainless steel trim kits with the following finishes (indicated with a suffix to the product name): 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold. Or brass trim kits with the following finishes (indicated with a suffix to the product name): 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of spout outlets incorporating brass bodies and NBR ‘O’-rings. The spout outlets incorporate a plastic flow straightener. Models AX-SIR-140/RO/DIV and AX-BOK-140/SQ/DIV incorporate a self-cancelling diverter. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2010010

Size:

½” BSP (M)

Marking:

Axces by VADO on base of spout.

Installation Requirements:

R001 R030 R040

Expiry date:

31/10/2025

Model:

AX-SIR-140/RO. AX-SIR-140/RO/DIV. AX-BOK-140/SQ. AX-BOK-140/SQ/DIV.

Product Images

Approval Holder:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company

Manufacturer:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company

Range of chemical dosing equipment which incorporate self-closing valves with a plastic body. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. Maximum working pressure 9.0 bar. Maximum operating temperature – 60ºC

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2012065

Size:

¾” BSP male inlet

Marking:

SEKO, max pressure, max temperature and other technical info on label on housing.

Installation Requirements:

R001 R160

Expiry date:

31/12/2025

Model:

PXB1F04 PROMAX BUTTON FLEX-GAP 4L/MINPRODUCT PXB1F16 PROMAX BUTTON FLEX-GAP 14L/MINPRODUCT PXB1F30 PROMAX BUTTON FLEX-GAP 30L/MINPRODUCT PXB4F04 PROMAX BUTTON FLEX-GAP 4L/MINPRODUCT PXB4F16 PROMAX BUTTON FLEX-GAP 14L/MINPRODUCT PXB4F30 PROMAX BUTTON FLEX-GAP 30L/MINPRODUCT PXS1F04 PROMAX SLIDE FLEX-GAP 4L/MINPRODUCT PXS1F16 PROMAX SLIDE FLEX-GAP 14L/MINPRODUCT PXS1F30 PROMAX SLIDE FLEX-GAP 30L/MINPRODUCT PXS4F04 PROMAX SLIDE FLEX-GAP 4L/MINPRODUCT PXS4F16 PROMAX SLIDE FLEX-GAP 14L/MINPRODUCT PXS4F30 PROMAX SLIDE FLEX-GAP 30L/MINPRODUCT

Product Images

Approval Holder:

SEKO SpA

Company Name

SEKO SpA

Address

Via Salaria KM 92, 200 02010 S.Sufina (RI) Italy

View All Listings by this Company

Talbot range of self tapping ferrule straps with plastic bodies and a nitrile rubber seal. The product incorporates either a ¾” BSP (M) connection or a 25mm or 32mm push fit connection on the outlet from the cutting arm. For below ground use only. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1010 Ferrules

Size:

See model

Marking:

Talis logo & size on strap. Ebco and date of manufacture MM/YY on metal banjo.

Installation Requirements:

R001 R008

Expiry date:

31/07/2025

Model:

Talbot Self Tapping Ferrule Strap PVC/PE x FI ¾”: E11912: 63mm PVC/PE x FI ¾ in. E11915: 90mm PVC/PE x FI ¾ in. E11918: 110mm PVC/PE x FI ¾ in. E11921: 125mm PVC/PE x FI ¾ in. Talbot Self Tapping Ferrule Strap PVC/PE x 25mm SDR11: E11910: 63mm PVC/PE x 25mm SDR11. E11913: 90mm PVC/PE x 25mm SDR11. E11916: 110mm PVC/PE x 25mm SDR11. E11919: 125mm PVC/PE x 25mm SDR11. Talbot Self Tapping Ferrule Strap PVC/PE x 32mm SDR11: E11911: 63mm PVC/PE x 32mm SDR11. E11914: 90mm PVC/PE x 32mm SDR11. E11917: 110mm PVC/PE x 32mm SDR11. E11920: 125mm PVC/PE x 32mm SDR11.

Product Images

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

“Plimat PVC-U Fittings BS Inch and PVC-U Fittings Threaded” range of PVC-U solvent cement or threaded fittings for use with “Plimat PVC-U BS inch pipe” (manufactured to EN1452-2). Maximum working pressure 15.0 bar for solvent cement connections and 10.0 bar for fittings that only include/also include a threaded connection. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2009336

Size:

See model

Marking:

Fittings: Plimat, size, material and date of manufacture (date clock). Pipe: Plimat, size, material, date (DD/MM), year, class and other technical information.

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

Elbow 90° Plain Inch: ½” PVCGOP0200, ¾” PVCGOP0250, 1” PVCGOP0320, 1¼” PVCGOP0400, 1½” PVCGOP0500, 2” PVCGOP0630, 2½” PVCGOP0750, 3” PVCGOP0900, 4” PVCGOP1100, 5” PVCGOP1400, 6” PVCGOP1600. Elbow 45° Plain Inch: ½” PVCGYP0200, ¾” PVCGYP0250, 1” PVCGYP0320, 1¼” PVCGYP0400, 1½” PVCGYP0500, 2” PVCGYP0630, 2½” PVCGYP0750, 3” PVCGYP0900, 4” PVCGYP1100, 5” PVCGYP1400, 6” PVCGYP1600. Socket Plain Inch: ½” PVCMAP0200, ¾” PVCMAP0250, 1” PVCMAP0320, 1¼” PVCMAP0400, 1½” PVCMAP0500, 2” PVCMAP0630, 2½” PVCMAP0750, 3” PVCMAP0900, 4” PVCMAP1100, 5” PVCMAP1400, 6” PVCMAP1600. Bend 90° Plain Inch: ½” PVCCUP0200, ¾” PVCCUP0250, 1” PVCCUP0320, 1¼” PVCCUP0400, 1½” PVCCUP0500, 2” PVCCUP0630, 2½” PVCCUP0750, 3” PVCCUP0900, 4” PVCCUP1100. Tee Plain Inch: ½” PVCTIP0200, ¾” PVCTIP0250, 1” PVCTIP0320, 1¼” PVCTIP0400, 1½” PVCTIP0500, 2” PVCTIP0630, 2½” PVCTIP0750, 3” PVCTIP0900, 4” PVCTIP1100, 5” PVCTIP1400, 6” PVCTIP1600. Cap Plain Inch: ½” PVCCAP0200, ¾” PVCCAP0250, 1” PVCCAP0320, 1¼” PVCCAP0400, 1½” PVCCAP0500, 2” PVCCAP0630, 2½” PVCCAP0750, 3” PVCCAP0900, 4” PVCCAP1100, 5” PVCCAP1400, 6” PVCCAP1600. Union Plain Inch: ½” PVCBOP0200, ¾” PVCBOP0250, 1” PVCBOP0320, 1¼” PVCBOP0400, 1½” PVCBOP0500, 2” PVCBOP0630, 2½” PVCBOP0750, 3” PVCBOP0900, 4” PVCBOP1100. Union Plain Female – BSP Threaded Male: 1½” x 1½” PVCBRP050F, 1½” x 1½” PVCBRP050G, 2” x 2” PVCBRP063G. Union Plain – BSP Threaded Male: ½” PVCBOCM0200, ¾” PVCBOCM0250, 1” PVCBOCM0320, 1¼” PVCBOCM0400, 1½” PVCBOCM0500, 1½” x 2” PVCBOCM050G, 2” PVCBOCM0630. Reducing Bush Plain Inch: ½” x ⅜” PVCRCP020A, ¾” x ½” PVCRCP025B, 1” x ½” PVCRCP032B, 1” x ¾” PVCRCP032C, 1¼” x 1” PVCRCP040D, 1½” x ¾” PVCRCP050C, 1½” x 1” PVCRCP050D, 1½” x 1¼” PVCRCP050E, 2” x 1” PVCRCP063D, 2” x 1¼” PVCRCP063E, 2” x 1½” PVCRCP063F, 2½” x 1¼” PVCRCP075E, 2½” x 1½” PVCRCP075F, 2½” x 2” PVCRCP075G, 3” x 1½” PVCRCP090F, 3” x 2” PVCRCP090G, 3” x 2½” PVCRCP090H, 4” x 2” PVCRCP110G, 4” x 3” PVCRCP110I, 5” x 4” PVCRCP140L, 6” x 4” PVCRCP160L. Stub Flange Plain Inch: 1” PVCQRP0320, 1¼” PVCQRP0400, 1½” PVCQRP0500, 2” PVCQRP0630, 2½” PVCQRP0750, 3” PVCQRP0900, 4” PVCQRP1100, 5” PVCQRP1400, 6” PVCQRP1600. Full Faced Flange Plain Inch: ½” PVCFNP0200, ¾” PVCFNP0250, 1” PVCFNP0320, 1¼” PVCFNP0400, 1½” PVCFNP0500, 2” PVCFNP0630, 2½” PVCFNP0750, 3” PVCFNP0900, 4” PVCFNP1100. Blank Flange: ½” PVCFCP0200, ¾” PVCFCP0250, 1” PVCFCP0320, 1¼” PVCFCP0400, 1½” PVCFCP0500, 2” PVCFCP0630, 2½” PVCFCP0750, 3” PVCFCP0900, 4” PVCFCP1100, 6” PVCFCP1600. Elbow 90° Plain – BSP Threaded: ½” PVCGOC0200, ¾” PVCGOC0250, 1” PVCGOC0320, 1¼” PVCGOC0400, 1½” PVCGOC0500, 2” PVCGOC0630, 2½” PVCGOC0750, 3” PVCGOC0900. Tee Plain – BSP Threaded: ½” PVCTIC0200, ¾” PVCTIC0250, 1” PVCTIC0320, 1¼” PVCTIC0400, 1½” PVCTIC0500, 2” PVCTIC0630, 2½” PVCTIC0750, 3” PVCTIC0900. Socket Plain – BSP Threaded Female: ½” PVCMAC0200, ¾” PVCMAC0250, 1” PVCMAC0320, 1¼” PVCMAC0400, 1½” PVCMAC0500, 2” PVCMAC0630, 2½” PVCMAC0750, 3” PVCMAC0900, 4” PVCMAC1100. Adaptor Plain Female – Male BSP Threaded: ½” PVCAMC0200, ¾” PVCAMC0250, 1” PVCAMC0320, 1¼” PVCAMC0400, 1½” PVCAMC0500, 2” PVCAMC0630, 2½” PVCAMC0750, 3” PVCAMC0900, 4” PVCAMC1100. Adaptor Plain Male Spigot – BSP Threaded Female: ½” PVCAFC0200, ¾” PVCAFC0250, 1” PVCAFC0320, 1¼” PVCAFC0400, 1½” PVCAFC0500, 2” PVCAFC0630, 2½” PVCAFC0750. Union Plain – BSP Threaded Female: ½” PVCBOC0200, ¾” PVCBOC0250, 1” PVCBOC0320, 1¼” PVCBOC0400, 1½” PVCBOC0500, 2” PVCBOC0630, 2½” PVCBOC0750, 3” PVCBOC0900, 4” PVCBOC1100. Reducing Bush Plain Male – BSP Threaded Female: ½” x ⅜” PVCRCC020A, ¾” x ½” PVCRCC025B, 1” x ¾” PVCRCC032C. Tank Connector: ½” PVCTCC0200, ¾” PVCTCC0250, 1” PVCTCC0320, 1¼” PVCTCC0400, 1½” PVCTCC0500, 2” PVCTCC0630, 2½” PVCTCC0750, 3” PVCTCC0900, 4” PVCTCC1100. Tank Connector Male BSP Threaded: ½” PVCTCCF0200, ¾” PVCTCCF0250, 1” PVCTCCF0320, 1¼” PVCTCCF0400, 1½” PVCTCCF0500, 1½” x 1¾” PVCTCC050G, 2” PVCTCCF0630. Barrell Nipple Plain BSP Threaded: ½” PVCBNC0200, ¾” PVCBNC0250, 1” PVCBNC0320, 1¼” PVCBNC0400, 1½” PVCBNC0500, 2” PVCBNC0630, 2½” PVCBNC0750, 3” PVCBNC0900, 4” PVCBNC1100. Composite Union Plain – Brass BSP Threaded Female: ½” PVCBFC0200, ¾” PVCBFC0250, 1” PVCBFC0320, 1¼” PVCBFC0400, 1½” PVCBFC0500, 2” PVCBFC0630, 2½” PVCBFC0750, 3” PVCBFC0900. Composite Union Plain – Brass BSP Threaded Male: ½” PVCBMC0200, ¾” PVCBMC0250, 1” PVCBMC0320, 1¼” PVCBMC0400, 1½” PVCBMC0500, 2” PVCBMC0630, 2½” PVCBMC0750, 3” PVCBMC0900. Hose Adaptor: ½” PVCPGF0200, ¾” PVCPGF0250, 1” PVCPGF0320, 1¼” PVCPGF0400, 1½” PVCPGF0500, 2” PVCPGF0630. Reinforced Elbow 90° Plain – BSP Threaded: ½” PVCRGOC0200, ¾” PVCRGOC0250, 1” PVCRGOC0320, 1¼” PVCRGOC0400, 1½” PVCRGOC0500, 2” PVCRGOC0630. Reinforced Tee Plain – BSP Threaded: ½” PVCRTIC0200, ¾” PVCRTIC0250, 1” PVCRTIC0320, 1¼” PVCRTIC0400, 1½” PVCRTIC0500, 2” PVCRTIC0630. Reinforced Socket Plain – BSP Threaded: ½” PVCRMAC0200, ¾” PVCRMAC0250, 1” PVCRMAC0320, 1¼” PVCRMAC0400, 1½” PVCRMAC0500, 2” PVCRMAC0630. Adaptor Reinforced Plain Male Spigot – BSP Threaded Female: ½” PVCRAFC0200, ¾” PVCRAFC0250, 1” PVCRAFC0320, 1¼” PVCRAFC0400, 1½” PVCRAFC0500, 2” PVCRAFC0630. Elbow 90° BSP Threaded: ½” PVCGOF0200, ¾” PVCGOF0250, 1” PVCGOF0320, 1¼” PVCGOF0400, 1½” PVCGOF0500, 2” PVCGOF0630, 2½” PVCGOF0750, 3” PVCGOF0900, 4” PVCGOF1100. Tee BSP Threaded: ½” PVCTIF0200, ¾” PVCTIF0250, 1” PVCTIF0320, 1¼” PVCTIF0400, 1½” PVCTIF0500, 2” PVCTIF0630, 2½” PVCTIF0750, 3” PVCTIF0900, 4” PVCTIF1100. Socket BSP Threaded: ½” PVCMAF0200, ¾” PVCMAF0250, 1” PVCMAF0320, 1¼” PVCMAF0400, 1½” PVCMAF0500, 2” PVCMAF0630, 2½” PVCMAF0750, 3” PVCMAF0900, 4” PVCMAF1100. Union BSP Threaded: ½” PVCBOF0200, ¾” PVCBOF0250, 1” PVCBOF0320, 1¼” PVCBOF0400, 1½” PVCBOF0500, 2” PVCBOF0630, 2½” PVCBOF0750, 3” PVCBOF0900, 4” PVCBOF1100. Plug BSP Threaded: ½” PVCTAF0200, ¾” PVCTAF0250, 1” PVCTAF0320, 1¼” PVCTAF0400, 1½” PVCTAF0500, 2” PVCTAF0630, 2½” PVCTAF0750, 3” PVCTAF0900, 4” PVCTAF1100. Cap BSP Threaded: ½” PVCCAF0200, ¾” PVCCAF0250, 1” PVCCAF0320, 1¼” PVCCAF0400, 1½” PVCCAF0500, 2” PVCCAF0630, 2½” PVCCAF0750, 3” PVCCAF0900, 4” PVCCAF1100. Full Faced Flange BSP Threaded: ½” PVCFFF0200, ¾” PVCFFF0250, 1” PVCFFF0320, 1¼” PVCFFF0400, 1½” PVCFFF0500, 2” PVCFFF0630, 2½” PVCFFF0750, 3” PVCFFF0900, 4” PVCFFF1100. Reducing Piece BSP Threaded Male – BSP Threaded Female: ¾” x ½” PVCRIF025B, ¾” x 1” PVCRIF025D, 1” x ½” PVCRIF032B, 1” x ¾” PVCRIF032C, 1¼” x ½” PVCRIF040B, 1¼” x ¾” PVCRIF040C, 1¼” x 1PVCRIF040D, 1½” x ½” PVCRIF050B, 1½” x ¾” PVCRIF050C, 1½” x 1” PVCRIF050D, 1½” x 1¼” PVCRIF050E, 1½” x 2” PVCRIF050F, 2” x ¾” PVCRIF063C, 2” x 1” PVCRIF063D, 2” x 1¼” PVCRIF063E, 2” x 1½” PVCRIF063F, 2” x 4” PVCRIF063J, 2½” x 4” PVCRIF075J, 3” x 4” PVCRIF090J. Barrell Nipple BSP Threaded: ½” PVCBAF0200, ¾” PVCBAF0250, 1” PVCBAF0320, 1¼” PVCBAF0400, 1½” PVCBAF0500, 2” PVCBAF0630, 2½” PVCBAF0750, 3” PVCBAF0900, 4” PVCBAF1100. Hexagon Nipple BSP Threaded: ½” PVCNIF0200, ¾” PVCNIF0250, 1” PVCNIF0320, 1¼” PVCNIF0400, 1½” PVCNIF0500, 2” PVCNIF0630, 2½” PVCNIF0750, 3” PVCNIF0900, 4” PVCNIF1100. Reducing Nipple BSP Male Threaded: ¾” x ½” PVCNRF025B, 1” x ½” PVCNRF032B, 1” x ¾” PVCNRF032C, 1¼” x ½” PVCNRF040B, 1¼” x ¾” PVCNRF040C, 1¼” x 1” PVCNRF040D, 1½” x ½” PVCNRF050B, 1½” x ¾” PVCNRF050C, 1½” x 1” PVCNRF050D, 1½” x 1¼” PVCNRF050E, 2” x 1” PVCNRF063D, 2” x 1¼” PVCNRF063E, 2” x 1½” PVCNRF063F. Nut BSP Threaded: ½” PVCNUF0200, ¾” PVCNUF0250, 1” PVCNUF0320, 1¼” PVCNUF0400, 1½” PVCNUF0500, 2” PVCNUF0630, 2½” PVCNUF0750, 3” PVCNUF0900, 4” PVCNUF1100. Reducing Bush BSP Threaded Male / BSP Threaded Female: ¾” x ½” PVCRCF025B, 1” x ¾” PVCRCF032C, 1¼” x 1” PVCRCF040D, 1½” x 1¼” PVCRCF050E, 2” x 1½” PVCRCF063F, 2½” x 2” PVCRCF075G, 3” x 2½” PVCRCF090H, 4” x 3” PVCRCF110I. Reducing Piece BSP Threaded Female – BSP Threaded Female: ½” x ⅜” PVCMRF020A, ¾” x ½” PVCMRF025B, 1” x ¾” PVCMRF032C, 1¼” x 1” PVCMRF040D, 1½” x 1¼” PVCMRF050E, 2” x 1½” PVCMRF063F, 2½” x 2” PVCMRF075G, 3” x 2½” PVCMRF090H, 4” x 3” PVCMRF110I. Pipe 9 Bar: 2” PVCUCLC0630, 2½” PVCUCLC0750, 3” PVCUCLC0900, 4” PVCUCLC1100, 5” PVCUCLC1400, 6” PVCUCLC1600. Pipe 15 Bar: ½” PVCUCLE0200, ¾” PVCUCLE0250, 1” PVCUCLE0320, 1¼” PVCUCLE0400, 1½” PVCUCLE0500, 2” PVCUCLE0630, 2½” PVCUCLE0750, 3” PVCUCLE0900, 4” PVCUCLE1100, 5” PVCUCLE1400, 6” PVCUCLE1600.

Approval Holder:

Plimat (UK) Ltd

Company Name

Plimat (UK) Ltd

Address

Unit 7, Newmans Copse Road, Hounsdown Business Park, Totton, Southampton

Postcode

SO40 9LX

Phone

0845 055 9022

View All Listings by this Company

Uponor S-Press press fittings, Uni-X & Uni-C compression fittings for use with Uponor MLC pipe. Maximum working pressure 10.0 bar, maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010907

Size:

12mm & 14mm.

Marking:

Manufacturers name or trademark “U” and size on fitting. Uponor and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

1013575 - UPONOR MLC PIPE WHITE 12x1,6 1013366 - UPONOR MLC PIPE WHITE 14x2,0 1014511 UPONOR S‐PRESS ADAPTER 14‐15CU 1014513 UPONOR S‐PRESS ADAPTER MALE THREAD 14‐R1/2"MT 1014515 UPONOR S‐PRESS ADAPTER FEMALE THREAD 14‐RP1/2"FT 1014654 Uponor SMART AQUA ELBOW ADAPTER S‐PRESS 14‐12CU L = 150 MM 1015615 UPONOR SMART RADI ELBOW ADAPTER PLATED S‐Press 14‐ 15 CU L = 350 MM 1014886 UPONOR S‐PRESS TEE 14‐14‐14 1015154 UPONOR S‐PRESS COUPLING 14‐14 1015437 UPONOR SMART AQUA TAP ELBOW S‐PRESS 14‐RP1/2"FT 1013813 Uponor Uni‐X compression adapter plated MLC UK 12‐ 15mmFT 1013831 Uponor Uni‐X compression adapter MLC UK 12‐15mmFT 1013894 UPONOR UNI‐C COUPLING PLATED MLC 1/2"MT‐1/2"MT 1013914 UPONOR UNI‐C ELBOW PLATED MLC G1/2"MT‐G1/2"MT 1013946 UPONOR UNI‐C TEE PLATED MLC G1/2"MT‐ G1/2"MT‐G1/2"MT

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Manufacturer:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Range of Aquaterra PP-RCT socket fusion fittings for use with Aquaterra PP-RCT SDR 6 pipe and Aquaterra PP-RCT SDR 7.4 pipe (manufactured to EN ISO 15874). Maximum working pressure 10.0 bar. Maximum working temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2012068

Size:

20mm, 25mm, 32mm, 40mm, 50mm & 63mm. Male & Female connections ½” to 2”

Marking:

For PIPE Trade name “AQUATERRA”, “FASER COMPOSITE STABIL PIPE PP-RCT”, size, SDR, “EN ISO 15874” “DIN 8077/8078”, code for machine, manufacture date and time (DD/MM/YYYY) (HH:MM:SS), manufacturing location, Batch number on pipe For Fitting Trade name “AQTERRA”, “PP-RCT TYPE 4”, PN and size on fitting body.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

Aquaterra PP-RCT SDR 6 Fiber PIPE AT6622032 AT6622532 AT6623232 AT6624032 AT6625032 AT6626332 Aquaterra PP-RCT SDR 7.4 Fiber PIPE AT6622025 AT6622525 AT6623225 AT6624025 AT6625025 AT6626325 Aquaterra PP-RCT Coupler ATPPRCT6554020 ATPPRCT6554025 ATPPRCT6554032 ATPPRCT6554040 ATPPRCT6554050 ATPPRCT6554063 Aquaterra PP-RCT Elbow 90° ATPPRCT6555020 ATPPRCT6555025 ATPPRCT6555032 ATPPRCT6555040 ATPPRCT6555050 ATPPRCT6555063 Aquaterra PP-RCT Equal Tee ATPPRCT6557025 ATPPRCT6557025 ATPPRCT6557032 ATPPRCT6557040 ATPPRCT6557050 ATPPRCT6557063 AquaTerra PP-RCT Reducer ATPPRCT6562520 ATPPRCT6564020 ATPPRCT6563225 ATPPRCT6564032 ATPPRCT6565025 ATPPRCT6565032 ATPPRCT6565040 ATPPRCT6566340 ATPPRCT6566350 AquaTerra PP-RCT Female Adaptor ATPPRCT7052012 ATPPRCT7052512 ATPPRCT7052534 ATPPRCT7053201 Aquaterra PP-RCT Male Adaptor ATPPRCT7062012 ATPPRCT7062512 ATPPRCT7062534 ATPPRCT7063201 ATPPRCT7064014 ATPPRCT7065012 ATPPRCT7066302 Aquaterra PP-RCT Female Elbow 90° ATPPRCT7082012 ATPPRCT7082512 Aquaterra PP-RCT Female Tee ATPPRCT7102012 ATPPRCT7102512 ATPPRCT7103212

Product Images

Approval Holder:

Aquagas Plastic Industries LLC

Company Name

Aquagas Plastic Industries LLC

View All Listings by this Company

Viega ‘Raxofix’ press connection fittings for use with viega Raxofix PE-Xc/Al/PE-Xc pipes. For above ground use only. Maximum working pressure 10 bar. Maximum operating temperature 70°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2012344

Size:

Please refer to model.

Marking:

Viega, size & technical information on fitting body. Viega Raxofix PE/Xc/Al/PE-Xc & technical information on pipe.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

Gunmetal Fittings : 5311 - Adapter with BSP (M) 16x½ - 16x¾ - 16x3/8 - 20x½ - 20x¾ - 25x½ - 25x¾ - 25x1 - 25x1¼ - 32x1 - 32x1¼ 53118 - Adapter with BSP (F) 16x½ 5312 - Adapter with BSP (F) 16x½ - 16x¾ - 20x½ - 20x¾ - 25x½ - 25x¾ - 25x1 - 25x1¼ - 32x1 - 32x1¼ 5313 - Plug-in piece 16x15 - 16x18 - 20x18 - 20x22 - 25x22 - 32x28 5313P - Plug-in piece 16x15 - 16x18 - 20x15 - 20x18 - 20x22 -25x22 - 32x28 5314 - 90° elbow with BSP (M) 16x½ - 16x¾ - 16x3/8 - 20x½ - 20x¾ - 25x¾ - 25x1 - 32x1 531411 - 90° elbow with BSP (M) 16x½ - 20x½ - 20x¾ - 25x¾ - 32x1 5315 - Coupling 16x16 - 20x20 - 20x16 - 25x25 - 25x16 -25x20 - 32x32 - 32x16 - 32x20 - 32x25 53153 - Coupling 16x16 - 20x20 - 25x25 - 32x32 5316 - 90° elbow 16x16 - 20x20 - 25x25 - 32x32 53168 - 90° elbow with BSP (F) 16x½ 5317 - T-piece with BSP (F) 16x½x16 - 20x½x20 - 25x½x25 - 25x¾x25 - 32x1x32 - 32x¾x32 5318 - T-piece 16x16x16 - 16x20x16 - 20x20x20 - 20x16x16 - 20x16x20 - 20x20x16 - 25x25x25 - 25x16x16 - 25x16x20 - 25x16x25 - 25x20x20 - 25x20x25 - 25x25x16 - 25x25x20 - 32x32x32 - 32x16x25 - 32x16x32 - 32x20x20 - 32x20x32 - 32x25x25 - 32x25x32 53188 - T-piece with BSP (F) 16x½x16 - 20x½x20 53189 - manifold with BSP (M) ½x16 532161 - mounting unit with BSP (F) 16x½x80/100/150 532171 - mounting unit with BSP (F) 16x½x70/100/150 532181 - mounting unit with BSP (F) 16x½x150 53223 - Plug-in piece 16 – 20 5323 - mounting unit with BSP (F) 16x½ 53243 - wall plate T-piece with BSP (F) 16x½x16 - 20x½x20 5325 - wall plate with BSP (F) 16x½x70 - 16x½x90 53254 - wall plate with BSP (M) 16x½ - 20x½ 53255 - wall plate with BSP (F) 16x½ - 20x½ - 20x¾ 53256 - double wall plate with BSP (F) 16x½x16 - 20x½x20 - 25x½x25 53257 - double wall plate with BSP (F) 16x½x16 - 20x½x16 - 20x½x20 - 25x½x20 - 25x½x25 532578 - Y-double wall plate with BSP (F) 16x16x½ - 20x20x½ - 25x25x½ 53258 - T-piece with BSP(F) 16x½x16 - 20x½x20 - 20x¾x20 5326 - 45° elbow 25x25 - 32x32 532605 - manifold with BSP (M) 16x¾x4 532606 - manifold with BSP (M/F) 16x¾x2 532607 - manifold with BSP (M) 16x¾x3 532608 - manifold with BSP (F) 16x¾x3 532609 - manifold with BSP (F) 16x¾x5 532631 - T-piece with BSP(M) ½x16 532632 - T-piece with plug-in end 15x16 53264 - T-piece with BSP(M) ½x16x16 - ¾x16x16 – ¾x20x20 5329 - screw fitting with viega cone 16x¾ – 20x¾ 53321 - 90° wall lead-in with BSP (M/F) 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x47 - 16x ½ x ¾ x55 - 20x ½ x ¾ x35 - 20x ½ x ¾ x47 533211 - 90° wall lead-in with BSP (M/F) 16x ½ x ¾ x18 - 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x55 533231 - wall lead-in with BSP (M/F) 16x ½ x ¾ x30 53324 - double T piece wall lead-in with BSP (M/F) 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x47 - 20x ½ x ¾ x35x20 - 20x ½ x ¾ x47 533281 - double T piece wall lead-in with BSP (M/F) 16x ½ x ¾ x25 5355 - 90° adapter with BSP (F) 16x½ - 16x¾ 5356 - Cap 16 - 20 - 25 - 32 5363 - Adapter with BSP (F) 16x½ - 16x¾ - 20x½ - 20x¾ - 25x¾ - 25x1 - 25x1¼ - 25x1½ - 32x1¼ - 32x1½ 5381 - screw fitting with euro cone 16x ¾ - 20x¾ multilayer pipe (PE-Xc/Al/PE-Xc): 5301 - Pipe with protective pipe in grey 16x2,2 - 20x2,8 5302 - Pipe coil 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53023 - Pipe with 25mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 53024 - Pipe with 13mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53025 - Pipe with 9mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53026 - Pipe with 6mm concentric insulation 16x2,2 - 20x2,8 5303 - Pipe stick 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 5304 - Pipe with 25mm excentric insulation 16x2,2 - 20x2,8 - 25x2,7 53041 - Pipe with 9mm excentric insulation 16x2,2 - 20x2,8

Product Images

Approval Holder:

Viega GmbH & Co KG

Company Name

Viega GmbH & Co KG

Address

Viega Platz 1, D-57439 Attendorn

Country

Germany

View All Listings by this Company

Manufacturer:

Viega GmbH & Co KG

Company Name

Viega GmbH & Co KG

Address

Viega Platz 1, D-57439 Attendorn

Country

Germany

View All Listings by this Company

Viega ‘Raxofix’ press connection fittings for use with viega Raxofix PE-RT/Al/PE-RT pipes. For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2012345

Size:

Please refer to model.

Marking:

Viega, size & technical information on fitting body. Viega Raxofix & technical information on pipe.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

5311- Adapter with BSP (M) 16x½ - 16x¾ - 16x3/8 - 20x½ - 20x¾ - 25x½ - 25x¾ - 25x1 - 25x1¼ - 32x1 - 32x1¼ - 40x1¼- 40x1½ 53118 - Adapter with BSP (F) 16x½ 5312 - Adapter with BSP (F) 16x½ - 16x¾ - 20x½ - 20x¾ - 25x½ - 25x¾ - 25x1 - 25x1¼ - 32x1 - 32x1¼ - 40x1¼ - 40x1½ 5313 - Plug-in piece 16x15 - 16x18 - 20x18 - 20x22 - 25x22 - 32x28 - 40x35 5313P - Plug-in piece 16x15 - 16x18 - 20x15 - 20x18 - 20x22 - 25x22 - 32x28 - 40x28 - 40x35 5314 - 90° elbow with BSP (M) 16x½ - 16x¾ - 16x3/8 - 20x½ - 20x¾ - 25x¾ - 25x1 - 32x1 - 40x1¼ 531411 - 90° elbow with BSP (M) 16x½ - 20x½ - 20x¾ - 25x¾ - 32x1 5315 - Coupling 16x16 - 20x20 - 20x16 - 25x25 - 25x16 - 25x20 - 32x32 - 32x16 - 32x20 - 32x25 - 40x40 - 40x16 - 40x32 53153 - Coupling 16x16 - 20x20 - 25x25 - 32x32 - 40x40 5316 - 90° elbow 16x16 - 20x20 - 25x25 - 32x32 - 40x40 53168 - 90° elbow with BSP (F) 16x½ 5317 - T-piece with BSP (F) 16x½x16 - 20x½x20 - 25x½x25 - 25x¾x25 - 32x1x32 - 32x¾x32 - 40x¾x40 5318 - T-piece 16x16x16 - 16x20x16 - 20x20x20 - 20x16x16 - 20x16x20 - 20x20x16 - 25x25x25 - 25x16x16 - 25x16x20 - 25x16x25 - 25x20x20 - 25x20x25 - 25x25x16 - 25x25x20 - 32x32x32 - 32x16x25 - 32x16x32 - 32x20x20 - 32x20x32 - 32x25x25 - 32x25x32 - 40x40x40 - 40x16x40 - 40x20x40 - 40x25x32 - 40x25x40 - 40x32x32 - 40x32x40 53188 - T-piece with BSP (F) 16x½x16 - 20x½x20 53189 - manifold with BSP (M) ½x16 532161 - mounting unit with BSP (F) 16x½x80/100/150 532171 - mounting unit with BSP (F) 16x½x70/100/150 532181 - mounting unit with BSP (F) 16x½x150 53223 - Plug-in piece 16 – 20 5323 - mounting unit with BSP (F) 16x½ 53243 - wall plate T-piece with BSP (F) 16x½x16 - 20x½x20 5325 - wall plate with BSP (F) 16x½x70 - 16x½x90 53254 - wall plate with BSP (M) 16x½ - 20x½ 53255 - wall plate with BSP (F) 16x½ - 20x½ - 20x¾ 53256 - double wall plate with BSP (F) 16x½x16 - 20x½x20 - 25x½x25 53257 - double wall plate with BSP (F) 16x½x16 - 20x½x16 - 20x½x20 - 25x½x20 - 25x½x25 532578 - Y-double wall plate with BSP (F) 16x16x½ - 20x20x½ - 25x25x½ 53258 - T-piece with BSP(F) 16x½x16 - 20x½x20 - 20x¾x20 5326 - 45° elbow 25x25 - 32x32 - 40x40 532605 - manifold with BSP (M) 16x¾x4 532606 - manifold with BSP (M/F) 16x¾x2 532607- manifold with BSP (M) 16x¾x3 532608 - manifold with BSP (F) 16x¾x3 532609 - manifold with BSP (F) 16x¾x5 532631 - T-piece with BSP(M) ½x16 532632 - T-piece with plug-in end 15x16 53264 - T-piece with BSP(M) ½x16x16 - ¾x16x16 - ¾x20x20 5329 - screw fitting with viega cone 16x¾ - 20x¾ 53321 - 90° wall lead-in with BSP (M/F) 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x47 - 16x ½ x ¾ x55 - 20x ½ x ¾ x35 - 20x ½ x ¾ x47 533211 - 90° wall lead-in with BSP (M/F) 16x ½ x ¾ x18 - 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x55 533231 - wall lead-in with BSP (M/F) 16x ½ x ¾ x30 53324 - double T piece wall lead-in with BSP (M/F) 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x47 - 20x ½ x ¾ x35x20 - 20x ½ x ¾ x47 533281 - double T piece wall lead-in with BSP (M/F) 16x ½ x ¾ x25 5355 - 90° adapter with BSP (F) 16x½ - 16x¾ 5356 - Cap 16 - 20 - 25 - 32 - 40 5363 - Adapter with BSP (F) 16x½ - 16x¾ - 20x½ - 20x¾ - 25x¾ - 25x1 - 25x1¼ - 25x1½ - 32x1¼ - 32x1½ - 40x1¼ - 40x1½ 5381 - screw fitting with euro cone 16x ¾ - 20x¾ multilayer pipe (PE-RT/Al/PE-RT): 5301 - Pipe with protective pipe in grey 16x2,2 - 20x2,8 5302 - Pipe coil 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53023 - Pipe with 25mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 53024 - Pipe with 13mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53025 - Pipe with 9mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53026 - Pipe with 6mm concentric insulation 16x2,2 - 20x2,8 5303 - Pipe stick 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 - 40x3,5 5304 - Pipe with 25mm excentric insulation 16x2,2 - 20x2,8 - 25x2,7 53041- Pipe with 9mm excentric insulation 16x2,2 - 20x2,8 Fittings: 5311- Adapter with BSP (M): 16x½ - 16x¾ - 16x3/8 - 20x½ - 20x¾ - 25x½ - 25x¾ - 25x1 - 25x1¼ - 32x1 - 32x1¼ - 40x1¼ - 40x1½. 53118 - Adapter with BSP (F): 16x½. 5312 - Adapter with BSP (F): 16x½ - 16x¾ - 20x½ - 20x¾ - 25x½ - 25x¾ - 25x1 - 25x1¼ - 32x1 - 32x1¼ - 40x1¼ - 40x1½. 5313 - Plug-in piece: 16x15 - 16x18 - 20x18 - 20x22 - 25x22 - 32x28 - 40x35. 5313P - Plug-in piece: 16x15 - 16x18 - 20x15 - 20x18 - 20x22 - 25x22 - 32x28 - 40x28 - 40x35. 5314 - 90° elbow with BSP (M): 16x½ - 16x¾ - 16x3/8 - 20x½ - 20x¾ - 25x¾ - 25x1 - 32x1 - 40x1¼. 531411 - 90° elbow with BSP (M): 16x½ - 20x½ - 20x¾ - 25x¾ - 32x1. 5315 - Coupling: 16x16 - 20x20 - 20x16 - 25x25 - 25x16 - 25x20 - 32x32 - 32x16 - 32x20 - 32x25 - 40x40 - 40x16 - 40x32. 53153 - Coupling: 16x16 - 20x20 - 25x25 - 32x32 - 40x40. 5316 - 90° elbow: 16x16 - 20x20 - 25x25 - 32x32 - 40x40. 53168 - 90° elbow with BSP (F): 16x½. 5317 - T-piece with BSP (F): 16x½x16 - 20x½x20 - 25x½x25 - 25x¾x25 - 32x1x32 - 32x¾x32 - 40x¾x40. 5318 - T-piece: 16x16x16 - 16x20x16 - 20x20x20 - 20x16x16 - 20x16x20 - 20x20x16 - 25x25x25 - 25x16x16 - 25x16x20 - 25x16x25 - 25x20x20 - 25x20x25 - 25x25x16 - 25x25x20 - 32x32x32 - 32x16x25 - 32x16x32 - 32x20x20 - 32x20x32 - 32x25x25 - 32x25x32 - 40x40x40 - 40x16x40 - 40x20x40 - 40x25x32 - 40x25x40 - 40x32x32 - 40x32x40. 53188 - T-piece with BSP (F): 16x½x16 - 20x½x20. 53189 - manifold with BSP (M): ½x16. 532161 - mounting unit with BSP (F): 16x½x80/100/150. 532171 - mounting unit with BSP (F): 16x½x70/100/150. 532181 - mounting unit with BSP (F): 16x½x150. 53223 - Plug-in piece: 16 - 20. 5323 - mounting unit with BSP (F): 16x½. 53243 - wall plate T-piece with BSP (F): 16x½x16 - 20x½x20. 5325 - wall plate with BSP (F): 16x½x70 - 16x½x90. 53254 - wall plate with BSP (M): 16x½ - 20x½. 53255 - wall plate with BSP (F): 16x½ - 20x½ - 20x¾. 53256 - double wall plate with BSP (F): 16x½x16 - 20x½x20 - 25x½x25. 53257 - double wall plate with BSP (F): 16x½x16 - 20x½x16 - 20x½x20 - 25x½x20 - 25x½x25. 532578 - Y-double wall plate with BSP (F): 16x16x½ - 20x20x½ - 25x25x½. 53258 - T-piece with BSP (F): 16x½x16 - 20x½x20 - 20x¾x20. 5326 - 45° elbow: 25x25 - 32x32 - 40x40. 532605 - manifold with BSP (M): 16x¾x4. 532606 - manifold with BSP (M/F): 16x¾x2. 532607- manifold with BSP (M): 16x¾x3. 532608 - manifold with BSP (F): 16x¾x3. 532609 - manifold with BSP (F): 16x¾x5. 532631 - T-piece with BSP (M): ½x16. 532632 - T-piece with plug-in end: 15x16. 53264 - T-piece with BSP(M): ½x16x16 - ¾x16x16 - ¾x20x20. 5329 - screw fitting with viega cone: 16x¾ - 20x¾. 53321 - 90° wall lead-in with BSP (M/F): 16x½x¾x25 - 16x½x¾x35 - 16x½x¾x47 - 16x½x¾x55 - 20x½x¾x35 - 20x½x¾x47. 533211 - 90° wall lead-in with BSP (M/F): 16x½x¾x18 - 16x½x¾x25 - 16x½x¾x35 - 16x½x¾x55. 533231 - wall lead-in with BSP (M/F): 16x½x¾x30. 53324 - double T piece wall lead-in with BSP (M/F): 16x½x¾x25 - 16x½x¾x35 - 16x½x¾x47 - 20x½x¾x35x20 - 20x½x ¾ x47 533281 - double T piece wall lead-in with BSP (M/F): 16x½x¾x25. 5355 - 90° adapter with BSP (F): 16x½ - 16x¾. 5356 - Cap: 16 - 20 - 25 - 32 - 40. 5363 - Adapter with BSP (F): 16x½ - 16x¾ - 20x½ - 20x¾ - 25x¾ - 25x1 - 25x1¼ - 25x1½ - 32x1¼ - 32x1½ - 40x1¼ - 40x1½. 5381 - screw fitting with euro cone: 16x ¾ - 20x¾. Multilayer pipe (PE-RT/Al/PE-RT): 5301 - Pipe with protective pipe in grey: 16x2,2 - 20x2,8. 5302 - Pipe coil: 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2. 53023 - Pipe with 25mm concentric insulation: 16x2,2 - 20x2,8 - 25x2,7. 53024 - Pipe with 13mm concentric insulation: 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2. 53025 - Pipe with 9mm concentric insulation : 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2. 53026 - Pipe with 6mm concentric insulation : 16x2,2 - 20x2,8. 5303 - Pipe stick: 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 - 40x3,5. 5304 - Pipe with 25mm excentric insulation: 16x2,2 - 20x2,8 - 25x2,7. 53041- Pipe with 9mm excentric insulation: 16x2,2 - 20x2,8. Models added March 2022 Fittings: 5311 - Adapter with BSP (M): 50x1½ - 63x2. 5312 - Adapter with BSP (F): 50x1¼ - 50x1½ - 63x2. 5313 - Plug-in piece: 50x42. 5313P - Plug-in piece: 50x35 - 63x54. 5315 - Coupling: 50x50 - 50x40 - 63x63 - 63x50. 53153 - Coupling: 50x50 - 63x63. 5316 - 90° elbow: 50x50 - 63x63. 5317 - T-piece with BSP (F): 50x1x50 - 63x1x63. 5318 - T-piece: 50x50x50 - 50x16x50 - 50x25x50 - 50x32x50 - 50x40x50 - 63x63x63 - 63x25x63 - 63x32x63 - 63x40x63 - 63x50x63. 5326 - 45° elbow: 50x50 - 63x63. 5356 - Cap: 50. Multilayer pipe (PE-RT/Al/PE-RT): 5303 - Pipe stick: 50x4,0 - 63x4,5.

Product Images

Approval Holder:

Viega GmbH & Co KG

Company Name

Viega GmbH & Co KG

Address

Viega Platz 1, D-57439 Attendorn

Country

Germany

View All Listings by this Company

Manufacturer:

Viega GmbH & Co KG

Company Name

Viega GmbH & Co KG

Address

Viega Platz 1, D-57439 Attendorn

Country

Germany

View All Listings by this Company

‘Numepress’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings. For use with stainless steel tube. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011045

Size:

15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139, 168mm. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F). DN50 to DN150 Flanged.

Marking:

Numepress, logo & size on body

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

F1 Coupling from 15 to 168.3 F2 Slip Coupling from 15 to 168.3 F3 90Q Female-Female Elbow from 15 to 168.3 F4 90Q Male - Female Elbow from 15 to 168.3 F5 45Q Female-Female Elbow from 15 to 168.3 F6 45Q Female - Male Elbow from 15 to 168.3 F7 Female Angle Adapter from 15 1/2" to 54 2" F8 Male Angle Adapter from 15 1/2" to 54 2" F9 Female Elbow with Wallnut from 15 1/2" to 22 3/4" Fl0 90Q Elbow with Plane Ends from 15 to 54 F11 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" F12 Female tee threaded adaptor from 15 1/2" to 108 2" F14 Reducer from 18-15 to 168.3-139.7 F15 Reducing tee from 18-15 to 168.3-139.7 F16 Equal Tee from 15 to 168.3 F17 Female adaptor from 15 3/ 8" to 88.9 3" F18 M ale adaptor from 15 3/8" to 108 4" F19 Flanges adaptor from 15 DN15 to 108 DNlO0 F20 Pre-formed pipe bridge from 15 to 28 F21 Plug from 15 to 108 F22 Air tuve Pipe Bridge from 15 to 28 F23 Pipe Bridge from 15 to 28 F24 3 Pieces adaptor from 15 to 60.3 F25 Female -Female pipe bridge from 15 to 28 F26 Female connector from 15 1/2" to 54 2" F27 Male connector from 15 1/2" to 54 2" F28 Press flanged adaptor from 54 DN50 to 168.3 DN150 F30 Cross or reduced cross from 15-15-15-15 to 168.3-168.3-168.3-168 .3 F33 45Q Male angle adaptor from 15 1/ 2" to 28 1" F34 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" F35 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" F36 Male Tee threaded adaptor from 15 3/8" to 35 11/4" F37 Male threaded cross from 15 1/2" to 108-4" F38 Female threaded cross from 15 1/ 2" to 108 4" F39 90Q Male angle adaptor from 15 3/8" to 54 2" F41 Male union connector gas from 15 1/ 2" to 54 2" F42 Female Union connector gas from 15 1/2" to 54 2" F43 Grooved Transition from 3/4" to 2" F44 Van Stone flange from 1/2" to 2" F45 Union Gas Female threaded from 15 3/4" to 54 2" F46 Straight union with press fitting on both ends from 15 to 54 F47 Half coupling from 15 to 168.3 F48 30Q Female-Female elbow from 15 to 108 F49 30Q Elbow with plain ends from 15 to 54 F50 15Q Female-female elbow from 15 to 108 F51 60Q Female-female elbow from 15 to 108 F52 Flanges adaptor PN6 from 15 DN15 to 108 DN100 F53 Pipe penetration from 15 to 108 F54 Male plug from 16 to 168.3 F55 Weld Adaptor from 15 to 60.3 F56 75Q Female -Female elbow from 15 to 108 F57 l0Q Female-Female elbow from 15 to 108 F58 60Q Elbow with plain ends from 15 to 54 F59 lSQ Elbow with plain ends from 15 to 54 F60 Slip coupling with female thread from DN15 1/ 2" to DN54 F61 Transition for grooved coupling from DN28x33.7 to DN108x 11 4.3 F63 7SQ Elbow with plain ends from 15 to 54 F64 15Q Male -female elbow from 15 to 108 F65 Male-Female pipe penetration from 15 to 108 F66 30Q Male-female elbow from 15 to 108 F72 45Q Elbow with plain ends from 15 to 54 Pipe 15 x 0.6 mm Material 1.4401/1.4404 Pipe 18 x 0.7 mm Material 1.4401/1.4404 Pipe 22 x 0.7 mm Material 1.4401/1.4404 Pipe 28 x 0.8 mm Material 1.4401/1.4404 Pipe 35 x 1 mm Material 1.4401/1.4404 Pipe 42 x 1.1 mm Material 1.4401/1.4404 Pipe 54 x 1.2 mm Material 1.4401/1.4404 Pipe 76.1 x 1.5 mm Material 1.4 401/ 1.4404 Pipe 15 x 1 mm Material 1.4401/1.4404 Pipe 18 x 1 mm Material 1.4401/1.4404 Pipe 22 x 1.2 mm Material 1.4401/1.4404 Pipe 28 x 1.2 mm Material 1.4401/1.4404 Pipe 35 x 1.5 mm Material 1.4401/1.4404 Pipe 42 x 1.5 mm Material 1.4401/1.4404 Pipe 54 x 1.5 mm Material 1.4401/1.4404 Pipe 76.1 x 2 mm Material 1.4401/1.4404 Pipe 88.9 x 2 mm Material 1.4401/1.4404 Pipe 114.3 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2.6 mm Material 1.4401/1.4404 Pipe 168.3 x 2 mm Material 1.4401/1.4404 Pipe 168.3 x 2.6 mm Material 1.4401/1.4404 Pipe 15 x 0.6 mm Material 1.4301/1.4307 Pipe 18 x 0.7 mm Material 1.4301/1.4307 Pipe 22 x 0.7 mm Material 1.4301/1.4307 Pipe 28 x 0.8 mm Material 1.4301/1.4307 Pipe 35 x 1 mm Material 1.4301/1.4307 Pipe 42 x 1.1 mm Material 1.4301/1.4307 Pipe 54 x 1 .2 mm rv,Material 1.4301/1.4307 Pipe 76.1 x 1.5 mm Material 1.4301/1.4307 Pipe 15 x 1 mm Material 1.4301/1.4307 Pipe 18 x 1 mm Material 1.4301/1.4307 Pipe 22 x 1. 2 mm Material 1.4301/1.4307 Pipe 28 x 1.2 mm Material 1.4301/1.4307 Pipe 35 x 1.5 mm Material 1.4301/1.4307 Pipe 42 x 1.5 mm Material 1.4301/1.4307 Pipe 54 x 1.5 mm Material 1.4301/1.4307 Pipe 76.1 x 2 mm Material 1.4301/1.4307 Pipe 88.9 x 2 mm Material 1.4301/1.4307 Pipe 108 x 2 mm Material 1.4301/1.4307 Pipe 114.3 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2.6 mm Material 1.4301/1 .4307 Pipe 168.3 x 2 mm Material 1.4301/1.4307 Pipe 168.3 x 2.6 mm Material 1.4301/1.4307

Product Images

Approval Holder:

ISOTUBI SL

Company Name

ISOTUBI SL

Address

Mecànica 6 Castellbisbal

Postcode

08750

Country

Spain

General Email

xavi.armengou@isotubi.com

View All Listings by this Company

‘ISR’ range of copper, DZR brass or gunmetal capillary, lead free solder ring and threaded fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum working temperatures 99°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010800

Size:

See model

Marking:

BSI Kitemark, size and Pegler logo (brand of Aalberts) on body

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

YP1 - Straight Coupling: copper x copper - 6mm - 67mm YP1 IM - Slip Adaptor Coupling: imperial copper x metric copper - ½" x 15mm - 1½" x 42mm YP1R - Reducing Straight Coupling: copper x copper 8mm x 6mm - 54mm x 42mm YP1 Slip - Slip Straight Coupling: copper x copper - 15mm, 22mm, 28mm YP2 - Straight Female Connector: copper x BSP: [Parallel Female Thread] 8mm x ¼" - 54mm x 2" YP2LC - Female reducing connector: [reduced BSP female end] - 15mm x ¼", 15mm x ⅜", 22mm x ½" YP2LI - Female reducing connector: [reduced copper end] - ¾" x 15mm YP3 - Straight male connector: [copper x BSP taper male thread] - 8mm x ¼" - 67mm x 2½" YP3LC - Male reducing connector: [reduced BSP male end] - 15mm x ¼" - 28mm x ¾" YP3LI - Male reducing connector: [reduced copper end] - 3/4" x 15mm, 1" x 22mm YP5 - Tank connector: copper x BSP [parallel male thread] - 15mm x ½" - 54mm x 2" YP5FC - Tank connector: copper x BSP [parallel male thread] - 15mm x ½", 22mm x ¾", 28mm x 1" YP6 - Reducer: [Larger end for insertion into fitting] - 8mm x 6mm - 67mm x 54mm YP7 - Female adaptor:[male copper for insertion into fitting x BSP parallel female thread] 15mm x ½" - 54mm x 2" YP8 - Male adaptor: [male copper for insertion into fitting x BSP taper male thread] - 15mm x ½" - 54mm x 2" YP9 - Adaptor: [imperial female copper x metric male copper] - ½" x 15mm - 2" x 54mm YP9B - Non-standard adaptor - ½" 17G x 15mm YP99 - Adaptor: [Metric or imperial female copper x male copper] - 15mm x ½" - 42mm x 1½" YP11 - Union Coupling: [copper x copper] - 15mm - 67mm YP12 - Elbow: [copper x copper] - 6mm - 67mm YP12R - Reducing Elbow: [copper x copper] - 22mm x 15mm, 28mm x 22mm YP12S - Street Elbow: [Female copper x Male copper] - 8mm - 42mm YP13 - Male Elbow: [copper x BSP taper male thread] - 15mm x ½" - 42mm x 1½" YP14 - Female Elbow: [copper x BSP parallel female thread] - 15mm x ½", 22mm x ¾", 28mm x 1" YP14LC - Reducing Female Elbow: [Reduced female end] - 22mm x ½" YP15 - Backplate Elbow: [copper x BSP parallel female thread] - 15mm x ½", 22mm x ¾" YP15LN - Backplate Elbow: [Extended nose and circular backplate] - 15mm x ½" YP18 - Slow Bend: [copper x copper] - 15mm, 22mm, 28mm YP20 - Return Bend: [copper x copper] - 15mm, 22mm, 28mm YP21 - Obtuse Elbow: [copper x copper] - 15mm - 67mm YP22 - Partial Crossover: [female copper x male copper] - 15mm, 22mm YP23 - Full Crossover: [copper x copper] - 15mm, 22mm YP24 - Equal Tee: [All ends for copper] - 6mm - 67mm YP24 Slip - Equal Tee, Slip pattern: [All ends for copper] - 15mm YP25 - Tee, Reduced Branch: [All ends for copper] - 22mm x 22mm x 10mm - 67mm x 67mm x 28mm YP26 - Tee, One End Reduced: [All ends for copper] - 22mm x 15mm x 22mm - 54mm x 42mm x 54mm YP27 - Tee, One End and Branch Reduced: [All ends for copper] - 22mm x 15mm x 15mm - 54mm x 42mm x 42mm YP28 - Tee, Both Ends Reduced: [All ends for copper] - 15mm x 15mm x 22mm - 35mm x 35mm x 42mm YP29 - Female Tee: [Copper end and Copper branch x reduced BSP parallel female end] - 15 x ½" x 15mm, 22 x ¾" x 22mm YP29R - Female Tee: [Copper end and Copper branch x reduced BSP parallel female end] - 22mm x ½" x 22mm, 28mm x ½" x 28mm, 35mm x ½" x 35mm YP30 - Female Tee: [Copper ends x BSP parallel female branch] - 15mm x 15mm x ½", 22mm x 22mm x ¾", 28mm x 28mm x 1" YP30BP - Backplate Tee: [Copper ends x BSP parallel female branch. Circular backplate] - 15mm x 15mm x ½" YP30R - Female Tee: [Copper ends x reduced BSP parallel female branch] 15mm x 15mm x ¼" - 42mm x 42mm x 1/2" YP37 - Sweep Tee, 90°: [All ends for copper] - 15mm, 22mm, 28mm YP37R - Sweep Tee, 90°: [Reduced branch] - 22mm x 22mm x 15mm, 28mm x 28mm x 15mm YP50 - Cross: [All ends for copper] - 15mm, 22mm YP61 - Stop End: [For use on copper tube] - 8mm - 54mm YP35 - Air Vent Tee: [YP37 Sweep Tee plus Air-Release Valve RV35] - 15mm RV35 - Air-Release Valve: [Male copper end suitable for use in any capillary socket] - 15mm YP62 - Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" - 22mm x ¾" YP63 - Bent Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" - 22mm x ¾" YP63L - Long Bent Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" YP64 - Bent union adaptor: [copper x BSP union nut] - 22mm x 1", 28mm x 1¼" YP65 - Bent male union connector: [copper x BSP taper male thread] - 15mm x ½" - 42mm x 1½" YP65R - Bent Boiler union: [copper x BSP taper male thread] - 22mm x 1" YP68 - Union adaptor: [copper x BSP union nut] - 15mm x ¾", 22mm x 1", 28mm x 1¼" YP68CL - Union adaptor: [copper x BSP union nut. Spigot and fibre washer joint] - 15mm x ¾", 22mm x 1", 28mm x 1¼" YP68CLDZR - Union adaptor: [copper x BSP union nut. Spigot and fibre washer joint] with DZR nuts - 15mm x ¾" YP68FF - Flat Faced Union adaptor: [copper x BSP union nut] Suitable for use with water meters. - 15mm x ¾", 22mm x 1" YP68M - Meter union connector: [copper x BSP union nut] Suitable for use with water meters. - 22mm x ¾" YP69 - Straight male union connector: [copper x BSP taper male thread] - 15mm x ½" - 54mm x 2" YP69DP - Straight male union connector: with 104mm dip pipe. - 22mm x ¾" YP69F - Straight female union connector: [copper x BSP parallel female thread] - 15mm x ½" - 54mm x 2" YP69P - Straight male union connector: [copper x BSP parallel male thread] - 15mm x ½", 22mm x ¾", 28mm x 1", 67mm x 2½" YP70 - Male nipple: [union thread x BSP taper male thread] - ½" x ⅜", ¾" x ½", 1" x ¾", 1¼" x 1" YP70P - Male nipple: [union thread x BSP taper male thread] For use with YP64 and YP68 - ¾" x ½", 1" x ¾" YP71 - Male nipple: [union thread x BSP taper male thread] equal ends. - ½" , ¾", 1" YP72 - Female nipple: [union thread x BSP parallel female thread] - ¾" x ½" - 2½" x 2" YP115 - Extension nipple: [Used to give extra length to female ends on YP14, YP15, YP30] - ½" - ¾"

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

‘CB ISR’ range of capillary fittings with internal solder rings, DZR brass or gunmetal capillary, lead free solder ring and threaded fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum working temperatures 99°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010805

Size:

See model

Marking:

BSI Kitemark, size and company logo "w" on body

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

543901 * CB ISR STRAIGHT COUPLING 8MM 543902 * CB ISR STRAIGHT COUPLING 10MM 543903 * CB ISR STRAIGHT COUPLING 15MM 543904 * CB ISR STRAIGHT COUPLING 22MM 543905 * CB ISR STRAIGHT COUPLING 28MM 543906 * CB ISR STRAIGHT COUPLING 35MM 543907 * CB ISR STRAIGHT COUPLING 42MM 543908 * CB ISR STRAIGHT COUPLING 54MM 543913 * CB ISR SLIP STRAIGHT COUPLING 15MM 543914 * CB ISR SLIP STRAIGHT COUPLING 22MM 543923 * CB ISR ADAPTOR COUPLING 22MMX3/4 543924 * CB ISR REDUCING COUPLING 22MMX15MM 543925 * CB ISR REDUCING COUPLING 28MMX22MM 543933 * CB ISR FI STRAIGHT CONNECTOR 15MMX1/2 543943 * CB ISR MI STRAIGHT CONNECTOR 15MMX1/2 543944 * CB ISR MI STRAIGHT CONNECTOR 22MMX3/4 543945 * CB ISR MI STRAIGHT CONNECTOR 28MMX1 543952 * CB ISR REDUCER 10MMX8MM 543953 * CB ISR REDUCER 15MMX8MM 543954 * CB ISR REDUCER 15MMX10MM 543955 * CB ISR REDUCER 22MMX15MM 543956 * CB ISR REDUCER 28MMX15MM 543957 * CB ISR REDUCER 28MMX22MM 543963 * CB ISR 90D ELBOW 8MM 543964 * CB ISR 90D ELBOW 10MM 543965 * CB ISR 90D ELBOW 15MM 543966 * CB ISR 90D ELBOW 22MM 543967 * CB ISR 90D ELBOW 28MM 543968 * CB ISR 90D ELBOW 35MM 543969 * CB ISR 90D ELBOW 42MM 543970 * CB ISR 90D ELBOW 54MM 543973 * CB ISR 90D STREET ELBOW 15MM 543974 * CB ISR 90D STREET ELBOW 22MM 543975 * CB ISR 90D STREET ELBOW 28MM 543976 * CB ISR 90D STREET ELBOW 35MM 543977 * CB ISR 90D STREET ELBOW 42MM 543983 * CB ISR 45D ELBOW 15MM 543984 * CB ISR 45D ELBOW 22MM 543985 * CB ISR STOP END 28MM 543986 * CB ISR STOP END 35MM 543987 * CB ISR STOP END 42MM 543988 * CB ISR STOP END 54MM 543991 * CB ISR STOP END 8MM 543992 * CB ISR STOP END 10MM 543993 * CB ISR STOP END 15MM 543994 * CB ISR STOP END 22MM 543995 * CB ISR 45D ELBOW 28MM 543996 * CB ISR 45D ELBOW 35MM 543997 * CB ISR 45D ELBOW 42MM 543998 * CB ISR 45D ELBOW 54MM 544113 * CB ISR EQUAL TEE 15MM 544114 * CB ISR EQUAL TEE 22MM 544115 * CB ISR EQUAL TEE 28MM 544116 * CB ISR EQUAL TEE 35MM 544117 * CB ISR EQUAL TEE 42MM 544118 * CB ISR EQUAL TEE 54MM 544123 * CB ISR REDUCING TEE 22MMX22MMX15MM 544124 * CB ISR REDUCING TEE 28MMX28MMX15MM 544125 * CB ISR REDUCING TEE 28MMX28MMX22MM 544126 * CB ISR REDUCING TEE 22MMX15MMX22MM 544127 * CB ISR REDUCING TEE 28MMX22MMX28MM 544133 * CB ISR REDUCING TEE 15MMX15MMX22MM 544134 * CB ISR REDUCING TEE 22MMX15MMX15MM 544135 * CB ISR REDUCING TEE 35MMX35MMX15MM 544136 * CB ISR REDUCING TEE 35MMX35MMX22MM 544137 * CB ISR REDUCING TEE 35MMX35MMX28MM 544138 * CB ISR REDUCING TEE 42MMX42MMX15MM 544139 * CB ISR REDUCING TEE 42MMX42MMX22MM 544140 * CB ISR REDUCING TEE 42MMX42MMX28MM 544141 * CB ISR REDUCING TEE 42MMX42MMX35MM 544142 * CB ISR REDUCING TEE 54MMX54MMX15MM 544143 * CB ISR FI TEE 15MMX15MMX1/2 544144 * CB ISR REDUCING TEE 54MMX54MMX22MM 544145 * CB ISR REDUCING TEE 54MMX54MMX28MM 544146 * CB ISR REDUCING TEE 54MMX54MMX35MM 544147 * CB ISR REDUCING TEE 54MMX54MMX42MM 544148 * CB ISR REDUCER 35MMX15MM 544149 * CB ISR REDUCER 35MMX22MM 544150 * CB ISR REDUCER 35MMX28MM 544151 * CB ISR REDUCER 42MMX15MM 544152 * CB ISR REDUCER 42MMX22MM 544153 * CB ISR STR TAP CONNECTOR 15MMX1/2 544154 * CB ISR STR TAP CONNECTOR 15MMX3/4 544155 * CB ISR STR TAP CONNECTOR 22MMX3/4 544156 * CB ISR BENT TAP CONNECTOR 15MMX1/2 544157 * CB ISR REDUCER 42MMX28MM 544158 * CB ISR REDUCER 42MMX35MM 544159 * CB ISR REDUCER 54MMX15MM 544160 * CB ISR REDUCER 54MMX22MM 544161 * CB ISR REDUCER 54MMX28MM 544162 * CB ISR REDUCER 54MMX35MM 544163 * CB ISR REDUCER 54MMX42MM 544164 * CB ISR STR UNION ADAPTOR 22MMX1 544173 * CB ISR BACKPLATE ELBOW 15MMX1/2

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

2 Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of brass compression fittings for use with copper pipe to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011314

Size:

½”, ¾” or 1” compression

Marking:

HM Pro on body. Heatmerchants Pro, size and technical information on nut.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

U47171, U47172, U47174, U47173, U47175, U47176, U47177, U47179, U47178, U47180, U47181, U47182, U47185, U47183, U47184, U47186, U47187, U47188, U47189, U47190, U47191, U47192, U47193, U47194, U47195, U47197, U47196, U47198, U47199, U47200, U47205, U47204, U47201, U47202, U47203, U47211, U47206, U47208, U47209, U47207, U47210, U47212, U47214, U47218, U47219, U47220, U47221, U47222, U47223

Product Images

Approval Holder:

Heat Merchants Group.

Company Name

Heat Merchants Group.

Postcode

CO WESTMEATH

View All Listings by this Company

Range of compression fittings with polypropylene bodies, nuts, acetal grip rings, EPDM ‘O’-rings and plastic pipe liners for use with MDPE pipe manufactured to BS EN 12201. For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2009337

Size:

20-63mm compression. ½”-2” BSP (M) or (F)

Marking:

Manufacturers name, size and date of manufacture (clock format) on body.

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

Couplers: 20.41.2005.020: 20mm 20.41.2005.025: 25mm 20.41.2005.032: 32mm 20.41.2005.040: 40mm 20.41.2005.050: 50mm 20.41.2005.063: 63mm Reducing Couplers: 20 41 2007 005: 25mm x 20mm 20 41 2007 009: 32mm x 20mm 20 41 2007 010: 32mm x 25mm 20 41 2007 015: 40mm x 32mm 20 41 2007 019: 50mm x 32mm 20 41 2007 020: 50mm x 40mm 20 41 2007 023: 63mm x 32mm 20 41 2007 024: 63mm x 40mm 20 41 2007 025: 63mm x 50mm Male Adaptors - Male BSP Thread: 20 41 2037 005: 20mm x ½” 20 41 2037 010: 20mm x ¾” 20 41 2037 011: 20mm x 1” 20 41 2037 015: 25mm x ½” 20 41 2037 020: 25mm x ¾” 20 41 2037 025: 25mm x 1” 20 41 2037 030: 32mm x ¾” 20 41 2037 035: 32mm x 1” 20 41 2037 040: 32mm x 1¼ 20 41 2037 042: 40mm x 1” 20 41 2037 045: 40mm x 1¼” 20 41 2037 046: 40mm x 1½” 20 41 2037 049: 50mm x 1¼” 20 41 2037 050: 50mm x 1½” 20 41 2037 052: 50mm x 2” 20 41 2037 053: 63mm x 1½” 20 41 2037 055: 63mm x 2” Female Adaptors - Female BSP Thread: 20 41 2065 005: 20mm x ½” 20 41 2065 010: 20mm x ¾” 20 41 2065 019: 25mm x ½” 20 41 2065 020: 25mm x ¾” 20 41 2065 022: 25mm x 1” 20 41 2065 033: 32mm x ½” 20 41 2065 034: 32mm x ¾” 20 41 2065 035: 32mm x 1” 20 41 2065 036: 32mm x 1¼” 20 41 2065 044: 40mm x 1” 20 41 2065 045: 40mm x 1¼” 20 41 2065 046: 40mm x 1½” 20 41 2065 049: 50mm x 1¼” 20 41 2065 050: 50mm x 1½” 20 41 2065 051: 50mm x 2” 20 41 2065 054: 63mm x 1½” 20 41 2065 055: 63mm x 2” Elbow 90°: 20 41 2001 020: 20mm 20 41 2001 025: 25mm 20 41 2001 032: 32mm 20 41 2001 040: 40mm 20 41 2001 050: 50mm 20 41 2001 063: 63mm Elbow 90° Female BSP Thread: 20 41 2002 005: 20mm x ½’ 20 41 2002 006: 20mm x ¾” 20 41 2002 009: 25mm x ½” 20 41 2002 010: 25mm x ¾” 20 41 2002 011: 25mm x 1” 20 41 2002 013: 32mm x ¾” 20 41 2002 015: 32mm x 1” 20 41 2002 019: 40mm x 1” 20 41 2002 020: 40mm x 1¼” 20 41 2002 025: 50mm x 1½” 20 41 2002 026: 50mm x 2” 20 41 2002 030: 63mm x 2” Elbow 90° Male BSP Thread: 20 41 2085 005: 20mm x ½” 20 41 2085 006: 20mm x ¾” 20 41 2085 009: 25mm x ½” 20 41 2085 010: 25mm x ¾” 20 41 2085 011: 25mm x 1” 20 41 2085 014: 32mm x ¾” 20 41 2085 015: 32mm x 1” 20 41 2085 016: 32mm x 1¼” 20 41 2085 019: 40mm x 1” 20 41 2085 020: 40mm x 1¼” 20 41 2085 021: 40mm x 1½” 20 41 2085 022: 40mm x 2” 20 41 2085 022: 50mm x 1¼” 20 41 2085 025: 50mm x 1½” 20 41 2085 026: 50mm x 2” 20 41 2085 029: 63mm x 1½” 20 41 2085 030: 63mm x 2” Tee Male BSP Threaded: 20 41 2086 005: 20mm x ½” 20 41 2086 006: 20mm x ¾” 20 41 2086 009: 25mm x ½” 20 41 2086 010: 25mm x ¾” 20 41 2086 011: 25mm x 1” 20 41 2086 014: 32mm x ¾” 20 41 2086 015: 32mm x 1” 20 41 2086 019: 40mm x 1” 20 41 2086 020: 40mm x 1¼” 20 41 2086 021: 40mm x 1½” 20 41 2086 025: 50mm x 1½” 20 41 2086 026: 50mm x 2” 20 41 2086 030: 63mm x 2” Tee Female BSP Threaded: 20 41 2004 005: 20mm x ½” 20 41 2004 006: 20mm x ¾” 20 41 2004 009: 25mm x ½” 20 41 2004 010: 25mm x ¾” 20 41 2004 011: 25mm x 1” 20 41 2004 014: 32mm x ¾” 20 41 2004 015: 32mm x 1” 20 41 2004 019: 40mm x 1” 20 41 2004 020: 40mm x 1¼” 20 41 2004 021: 40mm x 1½” 20 41 2004 024: 50mm x 1¼” 20 41 2004 025: 50mm x 1½” 20 41 2004 026: 50mm x 2” 20 41 2004 030: 63mm x 2” Tee: 20 41 2003 020: 20mm 20 41 2003 025: 25mm 20 41 2003 032: 32mm 20 41 2003 040: 40mm 20 41 2003 050: 50mm 20 41 2003 063: 63mm Reducing Tee: 20 41 2004 104: 20 x 25 x 20mm 20 41 2004 105: 25 x 20 x 25mm 20 41 2004 110: 32 x 25 x 32mm 20 41 2004 115: 40 x 32 x 40mm 20 41 2004 118: 50 x 25 x 50mm 20 41 2004 119: 50 x 32 x 50mm 20 41 2004 120: 50 x 40 x 50mm 20 41 2004 122: 63 x 25 x 63mm 20 41 2004 123: 63 x 32 x 63mm 20 41 2004 124: 63 x 40 x 63mm 20 41 2004 125: 63 x 50 x 63mm End Cap: 20 41 2012 020: 20mm 20 41 2012 025: 25mm 20 41 2012 032: 32mm 20 41 2012 040: 40mm 20 41 2012 050: 50mm 20 41 2012 063: 63mm

Approval Holder:

Plimat (UK) Ltd

Company Name

Plimat (UK) Ltd

Address

Unit 7, Newmans Copse Road, Hounsdown Business Park, Totton, Southampton

Postcode

SO40 9LX

Phone

0845 055 9022

View All Listings by this Company

“Plimat ABS Fittings BS Inch and ABS Adaptor Fittings” range of ABS solvent cement or threaded fittings for use with “Plimat ABS pipe”. Maximum working pressure: 15.0 bar (fittings with ½” - 4” solvent cement connections), 9.0 bar (fittings with 5” or 6” solvent cement connections, with or without threaded connecitons), and 10.0 bar (fittings with threaded connections and ½” - 4” solvent cement connections). Cold water and above ground use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2009338

Size:

See model

Marking:

Plimat, size and material on shoulder of fitting. Plimate, size, ABS class, pressure rating, BS5391 and line no. on pipe.

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

Elbow 90° Plain Inch: ½” ABSGOP0200, ¾” ABSGOP0250, 1” ABSGOP0320, 1¼” ABSGOP0400, 1½” ABSGOP0500, 2” ABSGOP0630, 2½” ABSGOP0750, 3” ABSGOP0900, 4” ABSGOP1100, 5” ABSGOP1400, 6” ABSGOP1600. Elbow 45° Plain Inch: ½” ABSGYP0200, ¾” ABSGYP0250, 1” ABSGYP0320, 1¼” ABSGYP0400, 1½” ABSGYP0500, 2” ABSGYP0630, 2½” ABSGYP0750, 3” ABSGYP0900, 4” ABSGYP1100, 5” ABSGYP1400, 6” ABSGYP1600. Socket Plain Inch: ½” ABSMAP0200, ¾” ABSMAP0250, 1” ABSMAP0320, 1¼” ABSMAP0400, 1½” ABSMAP0500, 2” ABSMAP0630, 2½” ABSMAP0750, 3” ABSMAP0900, 4” ABSMAP1100, 5” ABSMAP1400, 6” ABSMAP1600. Tee Plain Inch: ½” ABSTIP0200, ¾” ABSTIP0250, 1” ABSTIP0320, 1¼” ABSTIP0400, 1½” ABSTIP0500, 2” ABSTIP0630, 2½” ABSTIP0750, 3” ABSTIP0900, 4” ABSTIP1100, 5” ABSTIP1400, 6” ABSTIP1600. Cap Plain Inch: ½” ABSCAP0200, ¾” ABSCAP0250, 1” ABSCAP0320, 1¼” ABSCAP0400, 1½” ABSCAP0500, 2” ABSCAP0630, 2½” ABSCAP0750, 3” ABSCAP0900, 4” ABSCAP1100, 6” ABSCAP1600. Bend 90° Plain Inch: ½” ABSCUP0200, ¾” ABSCUP0250, 1” ABSCUP0320, 1¼” ABSCUP0400, 1½” ABSCUP0500, 2” ABSCUP0630, 2½” ABSCUP0750, 3” ABSCUP0900, 4” ABSCUP1100. Union Plain Inch: ½” ABSBOP0200, ¾” ABSBOP0250, 1” ABSBOP0320, 1¼” ABSBOP0400, 1½” ABSBOP0500, 2” ABSBOP0630, 2½” ABSBOP0750, 3” ABSBOP0900, 4” ABSBOP1100. Reducer Plain Inch: ¾” x ½” ABSRCP025B, 1” x ½” ABSRCP032B, 1” x ¾” ABSRCP032C, 1¼” x 1” ABSRCP040D, 1½” x ¾” ABSRCP050C, 1½” x 1” ABSRCP050D, 1½” x 1¼” ABSRCP050E, 2” x 1” ABSRCP063D, 2” x 1¼” ABSRCP063E, 2” x 1½” ABSRCP063F, 2½” x 1½” ABSRCP075F, 2½” x 2” ABSRCP075G, 3” x 1½” ABSRCP090F, 3” x 2” ABSRCP090G, 3” x 2½” ABSRCP090H, 4” x 2” ABSRCP110G, 4” x 3” ABSRCP110I, 5” x 4” ABSRCP140L, 6” x 4” ABSRCP160L. Stub Flange Plain Inch: 1” ABSQRP0320, 1¼” ABSQRP0400, 1½” ABSQRP0500, 2” ABSQRP0630, 2½” ABSQRP0750, 3” ABSQRP0900, 4” ABSQRP1100, 5” ABSQRP1400, 6” ABSQRP1600. Full Faced Flange Plain Inch: ½” ABSFNP0200, ¾” ABSFNP0250, 1” ABSFNP0320, 1¼” ABSFNP0400, 1½” ABSFNP0500, 2” ABSFNP0630, 2½” ABSFNP0750, 3” ABSFNP0900, 4” ABSFNP1100. Blanking Flange Plain Inch: ½” ABSFCP0200, ¾” ABSFCP0250, 1” ABSFCP0320, 1¼” ABSFCP0400, 1½” ABSFCP0500, 2” ABSFCP0630, 2½” ABSFCP0750, 3” ABSFCP0900, 4” ABSFCP1100, 6” ABSFCP1600. Elbow 90° Plain - Female Threaded BSP: ½” ABSGOC0200, ¾” ABSGOC0250, 1” ABSGOC0320, 1¼” ABSGOC0400, 1½” ABSGOC0500, 2” ABSGOC0630, 3” ABSGOC0900. Tee Plain - Female Threaded BSP: ½” ABSTIC0200, ¾” ABSTIC0250, 1” ABSTIC0320, 1¼” ABSTIC0400, 1½” ABSTIC0500, 2” ABSTIC0630, 3” ABSTIC0900. Socket Plain - Female Threaded BSP: ½” ABSMAC0200, ¾” ABSMAC0250, 1” ABSMAC0320, 1¼” ABSMAC0400, 1½” ABSMAC0500, 2” ABSMAC0630, 3” ABSMAC0900, 4” ABSMAC1100. Socket Plain - Male Threaded BSP: ½” ABSAMC0200, ¾” ABSAMC0250, 1” ABSAMC0320, 1¼” ABSAMC0400, 1½” ABSAMC0500, 2” ABSAMC0630, 3” ABSAMC0900, 4” ABSAMC1100. Male Spigot Plain - Female Threaded BSP: ½” ABSAFC0200, ¾” ABSAFC0250, 1” ABSAFC0320, 1¼” ABSAFC0400, 1½” ABSAFC0500, 2” ABSAFC0630. Reducing Bush Plain Male - Female Threaded BSP: ½” x ⅜” ABSRCC020A, ¾” x ½” ABSRCC025B, 1” x ¾” ABSRCC032C. Composite Union Plain Female - Female Brass Threaded BSP: ½” ABSBFC0200, ¾” ABSBFC0250, 1” ABSBFC0320, 1¼” ABSBFC0400, 1½” ABSBFC0500, 2” ABSBFC0630, 2½” ABSBFC0750, 3” ABSBFC0900. Composite Union Plain Female - Male Brass Threaded BSP: ½” ABSBMC0200, ¾” ABSBMC0250, 1” ABSBMC0320, 1¼” ABSBMC0400, 1½” ABSBMC0500, 2” ABSBMC0630, 2½” ABSBMC0750, 3” ABSBMC0900. Tank Connector Plain - Male Threaded BSP: ½” ABSTCC0200, ¾” ABSTCC0250, 1” ABSTCC0320, 1¼” ABSTCC0400, 1½” ABSTCC0500, 2” ABSTCC0630, 2½” ABSTCC0750, 3” ABSTCC0900, 4” ABSTCC1100. Barrel Nipple Plain - Male Threaded BSP: ⅜” ABSBNC0160, ½” ABSBNC0200, ¾” ABSBNC0250, 1” ABSBNC0320, 1¼” ABSBNC0400, 1½” ABSBNC0500, 2” ABSBNC0630, 2½” ABSBNC0750, 3” ABSBNC0900, 4” ABSBNC1100. Barrel Nipple Threaded BSP: ½” ABSBAF0200, ¾” ABSBAF0250, 1” ABSBAF0320, 1¼” ABSBAF0400, 1½” ABSBAF0500, 2” ABSBAF0630, 2½” ABSBAF0750, 3” ABSBAF0900, 4” ABSBAF1100. Back Nuts Threaded BSP: ½” ABSNUF0200, ¾” ABSNUF0250, 1” ABSNUF0320, 1¼” ABSNUF0400, 1½” ABSNUF0500, 2” ABSNUF0630, 2½” ABSNUF0750, 3” ABSNUF0900, 4” ABSNUF1100. Pipe 9 bar: 1” ABSCLC0320, 1¼” ABSCLC0400, 1½” ABSCLC0500, 2” ABSCLC0630, 2½” ABSCLC0750, 3” ABSCLC0900, 4” ABSCLC1100, 6” ABSCLC1600. Pipe 15 Bar: ½” ABSCLE0200, ¾” ABSCLE0250, 1” ABSCLE0320, 1¼” ABSCLE0400, 1½” ABSCLE0500, 2” ABSCLE0630, 3” ABSCLE0900, 4” ABSCLE1100.

Approval Holder:

Plimat (UK) Ltd

Company Name

Plimat (UK) Ltd

Address

Unit 7, Newmans Copse Road, Hounsdown Business Park, Totton, Southampton

Postcode

SO40 9LX

Phone

0845 055 9022

View All Listings by this Company

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101334

Size:

see model

Marking:

Dunshan Press and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

DS2001‐15 Equal coupling 15mm DS2001‐18 Equal coupling 18mm DS2001‐22 Equal coupling 22mm DS2001‐28 Equal coupling 28mm DS2001‐35 Equal coupling 35mm DS2001‐42 Equal coupling 42mm DS2001‐54 Equal coupling 54mm DS2002‐15 Adjustable coupling 15mm DS2002‐18 Adjustable coupling 18mm DS2002‐22 Adjustable coupling 22mm DS2002‐28 Adjustable coupling 28mm DS2002‐35 Adjustable coupling 35mm DS2002‐42 Adjustable coupling 42mm DS2002‐54 Adjustable coupling 54mm DS2003‐15 90° equal elbow 15mm DS2003‐18 90° equal elbow 18mm DS2003‐22 90° equal elbow 22mm DS2003‐28 90° equal elbow 28mm DS2003‐35 90° equal elbow 35mm DS2003‐42 90° equal elbow 42mm DS2003‐54 90° equal elbow 54mm DS2004‐15 90° plain elbow‐B 15mm DS2004‐18 90° plain elbow‐B 18mm DS2004‐22 90° plain elbow‐B 22mm DS2004‐28 90° plain elbow‐B 28mm DS2004‐35 90° plain elbow‐B 35mm DS2004‐42 90° plain elbow‐B 42mm DS2004‐54 90° plain elbow‐B 54mm DS2005‐15 45° equal elbow 15mm DS2005‐18 45° equal elbow 18mm DS2005‐22 45° equal elbow 22mm DS2005‐28 45° equal elbow 28mm DS2005‐35 45° equal elbow 35mm DS2005‐42 45° equal elbow 42mm DS2005‐54 45° equal elbow 54mm DS2006‐15 45° plain elbow‐B 15mm DS2006‐18 45° plain elbow‐B 18mm DS2006‐22 45° plain elbow‐B 22mm DS2006‐28 45° plain elbow‐B 28mm DS2006‐35 45° plain elbow‐B 35mm DS2006‐42 45° plain elbow‐B 42mm DS2006‐54 45° plain elbow‐B 54mm DS2007‐15 Equal tee 15mm DS2007‐18 Equal tee 18mm DS2007‐22 Equal tee 22mm DS2007‐28 Equal tee 28mm DS2007‐35 Equal tee 35mm DS2007‐42 Equal tee 42mm DS2007‐54 Equal tee 54mm DS2008‐18*15 Reducing tee 18mm×15mm DS2008‐22*15 Reducing tee 22mm×15mm DS2008‐22*18 Reducing tee 22mm×18mm DS2008‐28*15 Reducing tee 28mm×15mm DS2008‐28*18 Reducing tee 28mm×18mm DS2008‐28*22 Reducing tee 28mm×22mm DS2008‐35*15 Reducing tee 35mm×15mm DS2008‐35*18 Reducing tee 35mm×18mm DS2008‐35*22 Reducing tee 35mm×22mm DS2008‐35*28 Reducing tee 35mm×28mm DS2008‐42*15 Reducing tee 42mm×15mm DS2008‐42*18 Reducing tee 42mm×18mm DS2008‐42*22 Reducing tee 42mm×22mm DS2008‐42*28 Reducing tee 42mm×28mm DS2008‐42*35 Reducing tee 42mm×35mm DS2008‐54*15 Reducing tee 54mm×15mm DS2008‐54*18 Reducing tee 54mm×18mm DS2008‐54*22 Reducing tee 54mm×22mm DS2008‐54*28 Reducing tee 54mm×28mm DS2008‐54*35 Reducing tee 54mm×35mm DS2008‐54*42 Reducing tee 54mm×42mm DS2009‐15*Rp1/2 Female coupling 15mm×Rp1/2’’ DS2009‐22*Rp3/4 Female coupling 22mm×Rp3/4” DS2009‐28*Rp1 Female coupling 28mm×Rp1” DS2009‐35*Rp1 1/4 Female coupling 35mm×Rp1‐“1/4” DS2009‐42*Rp1 1/2 Female coupling 42mm×Rp1‐1/2” DS2009‐54*Rp2 Female coupling 54mm×Rp2” DS2010‐15*G1/2 Rotatable coupling 15mm×G1/2” DS2010‐18*G1/2 Rotatable coupling 18mm×G1/2” DS2010‐22*G3/4 Rotatable coupling 22mm×G3/4” DS2010‐28*G1 Rotatable coupling 28mm×G1” DS2010‐35*G1 1/4 Rotatable coupling 35mm×G1‐1/4” DS2010‐42*G1 1/2 Rotatable coupling 42mm×G1‐1/2” DS2010‐54*G2 Rotatable coupling 54mm×G2” DS2011‐15*R1/2 Male coupling 15mm×R1/2” DS2011‐18*R1/2 Male coupling 18mm×R1/2” DS2011‐22*R3/4 Male coupling 22mm×R3/4” DS2011‐28*R1 Male coupling 28mm×R1” DS2011‐35*R1 1/4 Male coupling 35mm×R1‐1/4” DS2011‐42*R1 1/2 Male coupling 42mm×R1‐1/2” DS2011‐54*R2 Male coupling 54mm×R2” DS2012‐15*Rp1/2 Female elbow 15mm×Rp1/2” DS2012‐18*Rp1/2 Female elbow 18mm×Rp1/2” DS2012‐22*Rp3/4 Female elbow 22mm×Rp3/4” DS2012‐28*Rp1 Female elbow 28mm×Rp1” DS2012‐35*Rp1 1/4 Female elbow 35mm×Rp1‐1/4” DS2012‐42*Rp1 1/2 Female elbow 42mm×Rp1‐1/2” DS2012‐54*Rp2 Female elbow 54mm×Rp2” DS2013‐15*R1/2 Male elbow 15mm×R1/2” DS2013‐18*R1/2 Male elbow 18mm×R1/2” DS2013‐22*R1/2 Male elbow 22mm×R1/2” DS2013‐22*R3/4 Male elbow 22mm×R3/4” DS2013‐28*R1 Male elbow 28mm×R1” DS2013‐35*R1 1/4 Male elbow 35mm×R1‐1/4” DS2013‐42*R1 1/2 Male elbow 42mm×R1‐1/2” DS2013‐54*R2 Male elbow 54mm×R2” DS2014‐15*Rp1/2 Female tee 15mm×Rp1/2” DS2014‐18*Rp1/2 Female tee 18mm×Rp1/2” DS2014‐22*Rp3/4 Female tee 22mm×Rp3/4” DS2014‐28*Rp1/2 Female tee 28mm×Rp1/2 DS2014‐28*Rp1 Female tee 28mm×Rp1” DS2014‐35*Rp1 1/4 Female tee 35mm×Rp1‐1/4” DS2014‐42*Rp1 1/2 Female tee 42mm×Rp1‐1/2” DS2014‐54*Rp2 Female tee 54mm×Rp2” DS2015‐15*R1/2 Male tee 15mm×R1/2” DS2015‐18*R1/2 Male tee 18mm×R1/2” DS2015‐22*R3/4 Male tee 22mm×R3/4” DS2015‐28*R1/2 Male tee 28 mm×R1/2’’ DS2015‐28*R1 Male tee 28mm×R1” DS2015‐35*R1 1/4 Male tee 35mm×R1‐1/4” DS2015‐42*R1 1/2 Male tee 42mm×R1‐1/2” DS2015‐54*R2 Male tee 54mm×R2” DS2016‐18*15 Reducer‐A 18mm×15mm DS2016‐22*15 Reducer‐A 22mm×15mm DS2016‐22*18 Reducer‐A 22mm×18mm DS2016‐28*15 Reducer‐A 28mm×15mm DS2016‐28*18 Reducer‐A 28mm×18mm DS2016‐28*22 Reducer‐A 28mm×22mm DS2016‐35*15 Reducer‐A 35mm×15mm DS2016‐35*18 Reducer‐A 35mm×18mm DS2016‐35*22 Reducer‐A 35mm×22mm DS2016‐35*28 Reducer‐A 35mm×28mm DS2016‐42*15 Reducer‐A 42mm×15mm DS2016‐42*18 Reducer‐A 42mm×18mm DS2016‐42*22 Reducer‐A 42mm×22mm DS2016‐42*28 Reducer‐A 42mm×28mm DS2016‐42*35 Reducer‐A 42mm×35mm DS2016‐54*42 Reducer‐A 54mm×42mm DS20107‐18*15 Reducer Coupling‐B 18mm×15mm DS20107‐22*15 Reducer Coupling‐B 22mm×15mm DS20107‐22*18 Reducer Coupling‐B 22mm×18mm DS20107‐28*15 Reducer Coupling‐B 28mm×15mm DS20107‐28*18 Reducer Coupling‐B 28mm×18mm DS20107‐28*22 Reducer Coupling‐B 28mm×22mm DS20107‐35*15 Reducer Coupling‐B 35mm×15mm DS20107‐35*18 Reducer Coupling‐B 35mm×18mm DS20107‐35*22 Reducer Coupling‐B 35mm×22mm DS20107‐35*28 Reducer Coupling‐B 35mm×28mm DS20107‐42*15 Reducer Coupling‐B 42mm×15mm DS20107‐42*18 Reducer Coupling‐B 42mm×18mm DS20107‐42*22 Reducer Coupling‐B 42mm×22mm DS20107‐42*28 Reducer Coupling‐B 42mm×28mm DS20107‐42*35 Reducer Coupling‐B 42mm×35mm DS20107‐54*15 Reducer Coupling‐B 54mm×15mm DS20107‐54*18 Reducer Coupling‐B 54mm×18mm DS20107‐54*22 Reducer Coupling‐B 54mm×22mm DS20107‐54*28 Reducer Coupling‐B 54mm×28mm DS20107‐54*35 Reducer Coupling‐B 54mm×35mm DS20107‐54*42 Reducer Coupling‐B 54mm×42mm

Product Images

Approval Holder:

Wenzhou Dunshan EPT Co.,Ltd.

Company Name

Wenzhou Dunshan EPT Co.,Ltd.

Address

Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Manufacturer:

Wenzhou Dunshan EPT Co.,Ltd.

Company Name

Wenzhou Dunshan EPT Co.,Ltd.

Address

Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Range of copper brazed, stainless steel heat exchangers in various sizes (4-300 plates, see model). Models size X8T-SC-S Maximum working pressure primary circuit: 32.0 bar Maximum working pressure secondary circuit: 26.0 bar Maximum operating temperature: 99°C Models size 10T-SC-M Maximum working pressure primary circuit: 41.0 bar Maximum working pressure secondary circuit: 36.0 bar Maximum operating temperature: 99°C Models size 15T-SC-M Maximum working pressure primary circuit: 45.0 bar Maximum working pressure secondary circuit: 45 bar Maximum operating temperature: 99°C Models size 16DW-SC-S Maximum working pressure primary circuit: 16.0 bar Maximum working pressure secondary circuit: 16.0 bar Maximum operating temperature: 99°C Models size 16DW-SC-M Maximum working pressure primary circuit: 45.0 bar Maximum working pressure secondary circuit: 45.0 bar Maximum operating temperature: 99°C Models size 220-SC-S Maximum working pressure primary circuit: 25.0 bar Maximum working pressure secondary circuit: 25.0 bars Maximum operating temperature: 99°C Models size 320HT-SC-S Maximum working pressure primary circuit: 33.0 bar Maximum working pressure secondary circuit: 29.0 bar Maximum operating temperature: 99°C Models size 320LT-SC-S Maximum working pressure primary circuit: 33.0 bars Maximum working pressure secondary circuit: 29.0 bars Maximum operating temperature: 99°C

Section:

1350 Heat Exchangers

Size:

See model

Marking:

SWEP, year of manufacture and technical information on adhesive label on body

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

Models X8T-SC-S Connection types: ½”, ¾” " External threaded male Number of plates minimum: 4 Number of plates maximum: 60 Models 10T-SC-M Connection types: 3/8” to 1 1/4 " External threaded male Number of plates minimum: 4 Number of plates maximum: 140 Models 15T-SC-M Connection types: ½” to 1” External threaded male Number of plates minimum: 4 Number of plates maximum: 60 Models 16DW-SC-S Connection types: ½” to 1 1/4” External threaded male Number of plates minimum: 4 Number of plates maximum: 140 Models 16DW-SC-M Connection types: ½” to 1 1/4” External threaded male Number of plates minimum: 4 Number of plates maximum: 140 Models 220-SC-S Connection types: 1” to 2 1/2” External threaded male Number of plates minimum: 4 Number of plates maximum: 300 Models 320HT-SC-S Connection types: 1 ½” to 2 1/2” External threaded male Number of plates minimum: 4 Number of plates maximum: 300 Models 320LT-SC-S Connection types: 1 ½” to 3” External threaded male Number of plates minimum: 4 Number of plates maximum: 260

Product Images

Approval Holder:

SWEP International AB

Company Name

SWEP International AB

Address

Järvgatan 3B, Box 105, 26122 Landskrona

Country

Sweden

View All Listings by this Company

Manufacturer:

SWEP Slovakia s.r.o | SWEP Malaysia sdn Bhd

Company Name

SWEP Slovakia s.r.o | SWEP Malaysia sdn Bhd

Address

View All Listings by this Company

Range of gas fired water heaters incorporating stainless steel strainers on the inlets. Maximum working pressure 10.0 Bar Maximum working temperature 85˚C

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

2012003

Size:

1/2" BSP (M) inlet and outlets

Marking:

VANWARD on front of heater, VANWARD model and technical info on adhesive label on side of heater.

Installation Requirements:

R001 R140

Expiry date:

31/12/2025

Model:

JSQ*FT-X** JSQ: mechanical exhaust gas water heater; *: Capacity(L); X**: appearance style (X11, X12, X13, X14) JSQ10FT-X11 JSQ10FT-X12 JSQ10FT-X13 JSQ10FT-X14 JSQ11FT-X11 JSQ11FT-X12 JSQ11FT-X13 JSQ11FT-X14 JSQ12FT-X11 JSQ12FT-X12 JSQ12FT-X13 JSQ12FT-X14 JSQ14FT-X11 JSQ14FT-X12 JSQ14FT-X13 JSQ14FT-X14 JSQ16FT-X11 JSQ16FT-X12 JSQ16FT-X13 JSQ16FT-X14 JSQ17FT-X11 JSQ17FT-X12 JSQ17FT-X13 JSQ17FT-X14 JSG*FT-X** JSG: Balanced gas water heater; *: Capacity(L); X**: appearance style (X11, X12, X13, X14) JSG10FT-X11 JSG10FT-X12 JSG10FT-X13 JSG10FT-X14 JSG11FT-X11 JSG11FT-X12 JSG11FT-X13 JSG11FT-X14 JSG12FT-X11 JSG12FT-X12 JSG12FT-X13 JSG12FT-X14 JSG14FT-X11 JSG14FT-X12 JSG14FT-X13 JSG14FT-X14 JSG16FT-X11 JSG16FT-X12 JSG16FT-X13 JSG16FT-X14 JSG17FT-X11 JSG17FT-X12 JSG17FT-X13 JSG17FT-X14

Product Images

Approval Holder:

Guangdong Vanward New Electric Co. Ltd.

Company Name

Guangdong Vanward New Electric Co. Ltd.

Address

13 Jianye Mid- Road Shunde High Tech Industry Development Zone

Country

Ronggui Shunde

View All Listings by this Company

Manufacturer:

Guangdong Vanward New Electric Co. Ltd.

Company Name

Guangdong Vanward New Electric Co. Ltd.

Address

13 Jianye Mid- Road Shunde High Tech Industry Development Zone

Country

Ronggui Shunde

View All Listings by this Company

Immersion temperature sensors with DZR bodies and an EPDM ‘O’-ring (STDW14 model only). Maximum working pressure 15.0 bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Size:

STDW1410K00*** & STDW1410K01***: Ø 11.43mm. STDW1310K00*** & STDW1310K01***: Ø 9.66mm.

Marking:

ENPI, model and production code (YWW - see model for description) on body.

Installation Requirements:

R001

Expiry date:

31/07/2025

Model:

STDW1410K00*** & STDW1410K01***. STDW1310K00*** & STDW1310K01***. Where: 10K = resistance value at 25°C, (not verified or considered part of the approval listing). 00 or 01 = code number of NTC β value. *** denotes production year and week in the following format. 1st * = year, and is replaced with L = 2020, M = 2021, N = 2022, O = 2023, P = 2024, Q = 2025. 2nd & 3rd * = week, e.g. 15 = week 15.

Approval Holder:

ENPI Elektronic San, VE DIS TIC. AS

Company Name

ENPI Elektronic San, VE DIS TIC. AS

Address

Dudullu O.S.B. 1 Cad No 1 Ismet Tarman Is Merkezi

Country

K:1 D:13

View All Listings by this Company

Manufacturer:

ENPI Elektronic San, VE DIS TIC. AS

Company Name

ENPI Elektronic San, VE DIS TIC. AS

Address

Dudullu O.S.B. 1 Cad No 1 Ismet Tarman Is Merkezi

Country

K:1 D:13

View All Listings by this Company

Range of pump docking manifolds with plastic bodies and NBR, EPDM and FKM ‘O’-rings. Maximum working pressure 8.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Size:

See model

Marking:

DAB water technology on plate attached to body.

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

60147247 E.SYDOCK - GAS: 1¼” BSP (F). 60150514 E.SYDOCK - NPT: 1¼” NPT (F). 60160491 E.SYTWIN - GAS: 1¼” BSP (F). 60162081 E.SYTWIN - NPT: 1¼” NPT (F).

Product Images

Approval Holder:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company