Zip Heaters UK Ltd T/A Zip Water UK Approvals


#2310097

‘G5 B’ & ‘G5 BA’ ranges of command centres that provide instant near boiling (filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The products are supplied with a filter cartridge. The products can also be supplied with a venturi system to provide mains cold water combined with water from the hot water tank (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 100˚C. Cold supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2310097
Expiry date:
31/10/2028
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip logo on body. Serial number containing date of manufacture (YYYY/MM/DD) and manufacturing code on adhesive label inside cover.
Installation Requirements:
R001 R007 R008 R009 R040 R150 R170
Model:
Command Centre UK HydroTap Main Models: H50086000UK - G5 B Home M, H50006000UK - G5 B60 M (with or without booster) H50008000UK - G5 BA60 M (with or without booster). Command Centre UK HydroTap Venturi Models: H50091000UK - G5 B Home H H50056000UK - G5 B60 H (with or without booster).
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200

View All Listings by this Company

Print This Approval


#2310101

Range of single hole, single outlet, swivel combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The vented models are supplied with a stainless steel braided PEX lined flexible hose assembly incorporating a ½" captive nut end connection, which provides main cold water to a venturi device which is part of a command centre (not supplied). The Arc vented models are supplied with a DZR brass tee piece, two DZR brass adaptors, two stainless-steel strainers (each combined with an EPDM washer) and a plastic flow restrictor, for installation prior to the cold inlet hose. The Arc and Cube mains models are supplied with two DZR brass adaptors and two stainless-steel strainers (each combined with an EPDM washer), for installation on each inlet hose. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2310101
Expiry date:
31/10/2028
Note:
IRN R010 applies to the Arc and Cube Mains models only.
Size:
Arc and Cube Mains models: Stainless steel braided PEX lined flexible hose assemblies incorporating ½" captive nut end connections, with ½” BSP (F) to ½” BSP (M) adaptors. Arc Vented models: ½” BSP (F) to tee piece (Cold in), prior to a stainless steel braided PEX lined flexible hose assembly incorporating a ½" captive nut end connection. Stainless steel braided TPSiV lined flexible hose assembly incorporating ½" captive nut end connection (Mixed in).
Marking:
Zip logo (‘Zip’) on operating member.
Installation Requirements:
R001 R006 R007 R009 R010
Model:
Arc Mixer Tap Mains: 93867UK (Bright Chrome), 93871UK (Brushed Chrome), 93879UK (Matt Black), 94278UK (Brushed Rose Gold), 94290UK (Brushed Gold), 94302UK (Gun Metal), 94314UK (Brushed Nickel). Arc Mixer Tap Vented: 93865UK (Bright Chrome), 93869UK (Brushed Chrome), 93877UK (Matt Black), 94276UK (Brushed Rose Gold), 94288UK (Brushed Gold), 94300UK (Gun Metal), 94312UK (Brushed Nickel). Cube Mixer Tap Mains: 93868UK (Bright Chrome), 93872UK (Brushed Chrome), 93880UK (Matt Black), 94279UK (Brushed Rose Gold), 94291UK (Brushed Gold), 94303UK (Gun Metal), 94315UK (Brushed Nickel).
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200

View All Listings by this Company

Print This Approval


#2101372

Range on inline filter cartridges incorporating plastic bodies. The filter media varies between models and includes active carbon, silver impregnated active carbon, silver carbon block & weak/strong cationic resin. Maximum working pressure 6.0 bar. Cold water use only.

Section:
1055 Filter Cartridges
WRAS Approval Number:
2101372
Expiry date:
31/01/2026
Size:
See model
Marking:
ZIP and other technical information on body. Flow arrow on head unit.
Installation Requirements:
R001 R008 R120 R170 R290
Model:
33.65mm OD: 95600 ZIP LIMESCALE FILTER FOR HOME LIGHT USE 95601 ZIP LIMESCALE FILTER FOR HOME 95602 ZIP LIMESCALE FILTER FOR WORK LIGHT USE 3/8” BSP (M): 95603 ZIP LIMESCALE FILTER FOR WORK 3.0, 95604 ZIP LIMESCALE FILTER FOR WORK HIGH USE4.5, 95605 ZIP LIMESCALE FILTER FOR WORK HEAVY USE 6.0.
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company

Print This Approval


#240102707

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes - see model). Electronic controls on the left-hand side of the body allow the tap to dispense one or more of the following (model specification dependent): ambient, near boiling, chilled or sparkling water. The spout incorporates a plastic aerator on the Sparkling/Ambient/Chilled outlet, and a separate outlet for the near boiling water. All models incorporate a vent outlet within the tap spout for the near-boiling water circuit. Near-boiling circuit has a maximum operating temperature of 98°C. All other circuits have a maximum operating temperature of 65°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
240102707
Expiry date:
31/01/2029
Note:
Open outlet use only. These taps are designed to only work with the Zip HydroTap Command Centres, (sold separately). R008 applies to the pushfit fittings and blue LLDPE tubing.
Size:
Sparkling/Ambient/Chilled inlet (model dependent): LLDPE pipe ¼”. Near boiling inlet: Silicone flexible pipe ID 7.7mm.
Marking:
Zip on operating member
Installation Requirements:
R001 R006 R008 R009 R160
Model:
95453xxx Arc Plus. 95454xxx Cube Plus. Where xxx denotes finish and can be replaced with: Z00 = CH Chrome, Z01 = BR Brushed Chrome, Z03 = FB Matt Black, Z05 = BRG Brushed Rose Gold, Z07 = BDG Brushed Gold, Z09 = BPT Gunmetal, Z11 = BNI Brushed Nickel. Each tap can be specified to dispense the following options: Near boiling and ambient. Near boiling, chilled and sparkling, Near boiling and chilled, Near boiling, Chilled and sparkling, Sparkling.
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200

View All Listings by this Company

Print This Approval


#240202711

‘G5 C’ command centre providing chilled (filtered) water via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The products are supplied with a filter cartridge. The inlet to the command centre incorporates two approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum inlet supply pressure 5.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
240202711
Expiry date:
28/02/2029
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and HydroTap logo on body.
Installation Requirements:
R001 R009 R040 R150 R170
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains models: H50011000UK - G5 C100 M.
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200

View All Listings by this Company

Print This Approval


#240202712

‘G5 CS’ command centre providing chilled or chilled sparkling water (both filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The product incorporates a pressure reducing valve (adjustable outlet pressure between 2.25 and 2.75 bar) on the supply to the carbonator unit. The carbonator inlet incorporates a non-return valve. The product is supplied with a filter cartridge. The inlet to the command centre incorporates two approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum inlet supply pressure 5.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
240202712
Expiry date:
28/02/2029
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and HydroTap logo on body.
Installation Requirements:
R001 R009 R040 R160 R170 R415
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains model: H50065000UK - G5 CS100 M.
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200

View All Listings by this Company

Print This Approval


#240402048

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes - see model). Electronic controls on the left-hand side of the body allow the tap to dispense one or more of the following (model specification dependent): boiling, chilled or sparkling water. Ambient (hot and cold) water is controlled via a ceramic cartridge headwork with a single lever operating member. The spout incorporates a plastic aerator on the Sparkling/Chilled and the Ambient outlet, and a separate outlet for the boiling water. Both model ranges incorporate a vent outlet within the tap spout for the boiling water circuit. Maximum working pressure 5.0 bar (Ambient (hot and cold) circuit only). 95458xxx models - Boiling circuit has a maximum operating temperature of 100°C. All other circuits have a maximum operating temperature of 65°C. 95459xxx models - Boiling circuit has a maximum operating temperature of 100°C. The ambient circuit has a maximum operating temperature of 65°C. The chilled/sparkling circuit has a maximum operating temperature of 60°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
240402048
Expiry date:
30/04/2029
Note:
Boiling, chilled or sparkling water circuits - Open outlet use only. These taps are designed to only work with the Zip HydroTap Command Centres, (sold separately). R008 applies to the pushfit fittings.
Size:
Ambient hot and cold inlets: Hot: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connection. Cold: ½” BSP (F) to tee piece installed prior to a stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connection. Boiling water: 8mm OD s/steel spigot (attached to tubing). Chilled or Chilled/sparkling water (model dependent): 8mm OD s/steel spigot (attached to tubing).
Marking:
ZIP on operating member
Installation Requirements:
R001 R006 R007 R008 R009
Model:
Celsius Plus All-in-one Boiling/Chilled: 95458xxx. Celsius Plus All-in-one Boiling/Chilled/Sparkling: 95459xxx. Where xxx denotes finish and can be replaced with: Z00 = Chrome, Z01 = Brushed Chrome, Z03 = Matt Black.
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.