Range of in-line `Y`-patterned strainers with brass bodies incorporating a stainless steel mesh strainer and a PTFE washer. Maximum working pressure 25.0 Bar. Maximum operating temperature 99.0°C

Section:

1715 Strainers

WRAS Approval Number:

2010112

Expiry date:

31/10/2025

Size:

See model.

Marking:

Brymec logo, PN, DN, flow arrow and size on body.

Installation Requirements:

R001 R120

Model:

Brass: 36233: ½” BSP (F). 36234: ¾” BSP (F). 36235: 1” BSP (F). 36236: 1¼” BSP (F). 36237: 1½” BSP (F). 36238: 2” BSP (F).

Factor:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

View All Listings by this Company

Range of single check valve assemblies with DZR brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

0030 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.

WRAS Approval Number:

2109066

Expiry date:

30/09/2026

Size:

30780 ∙ 15mm Brass Single Check Valve Compression 30781 ∙ 22mm Brass Single Check Valve Compression

Marking:

WRAS, BRYMEC, CR, size, PN and flow arrow on body.

Installation Requirements:

R001

Model:

30780 & 30781

Factor:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

View All Listings by this Company

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Maximum working pressure 16.0 bar Maximum operating temperature 85°C

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

2209064

Expiry date:

30/09/2027

Size:

see model

Marking:

Brymec logo, WRAS, size, flow arrow and CR on body

Installation Requirements:

R001

Model:

36366 ½” BSP (F) inlet/outlet 36367 ¾” BSP (F) inlet/outlet 36368 1” BSP (F) inlet/outlet 36369 1.1/4" BSP (F) inlet/outlet 36370 1½” BSP (F) inlet/outlet 36371 2” BSP (F) inlet/outlet

Factor:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

View All Listings by this Company

Range of solder ring copper fittings for use with copper tube to BS EN 1057. Maximum working pressure 16 bar. Maximum working temperature 99°C

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2210060

Expiry date:

31/10/2027

Size:

15MM, 22MM, 28MM, 35MM, 42MM, 54MM

Marking:

Brymec, EN1254 and size on body.

Installation Requirements:

R001

Model:

30289 Solder ring coupler 15mm 30290 Solder ring coupler 22mm 30291 Solder ring coupler 28mm 30292 Solder ring coupler 35mm 30293 Solder ring coupler 42mm 30294 Solder ring coupler 54mm 30390 Solder ring reducing coupler 22mm x 15mm 30374 Fitting reducer 22mm x 15mm 30375 Fitting reducer 28mm x 15mm 30376 Fitting reducer 28mm x 22mm 30377 Fitting reducer 35mm x 15mm 30378 Fitting reducer 35mm x 22mm 30379 Fitting reducer 35mm x 22mm 30380 Fitting reducer 42mm x 15mm 30381 Fitting reducer 42mm x 22mm 30382 Fitting reducer 42mm x 28mm 30383 Fitting reducer 42mm x 35mm 30384 Fitting reducer 54mm x 22mm 30385 Fitting reducer 54mm x 28mm 30386 Fitting reducer 54mm x 35mm 30387 Fitting reducer 54mm x 42mm 30393 90° Street elbow 15mm 30394 90° Street elbow 22mm 30395 90° Street elbow 28mm 30320 90° elbow 15mm 30321 90° elbow 22mm 30322 90° elbow 28mm 30323 90° elbow 35mm 30324 90° elbow 42mm 30325 90° elbow 54mm 30331 45° elbow 15mm 30332 45° elbow 22mm 30333 45° elbow 28mm 30334 45° elbow 35mm 30335 45° elbow 42mm 30336 45° elbow 54mm 30345 Equal tee 15mm 30346 Equal tee 22mm 30347 Equal tee 28mm 30348 Equal tee 35mm 30349 Equal tee 42mm 30350 Equal tee 54mm 30423 Reducing tee 15mm x 15mm x 22mm 30424 Reducing tee 22mm x 15mm x 15mm 30425 Reducing tee 22mm x 15mm x 22mm 30426 Reducing tee 22mm x 22mm x 15mm Model name/s of secondary products 30427 Reducing tee 22mm x 22mm x 28mm 30429 Reducing tee 28mm x 15mm x 15mm 30430 Reducing tee 28mm x 15mm x 28mm 30431 Reducing tee 28mm x 22mm x 15mm 30432 Reducing tee 28mm x 22mm x 22mm 30433 Reducing tee 28mm x 22mm x 28mm 30434 Reducing tee 28mm x 28mm x 15mm 30435 Reducing tee 28mm x 28mm x 22mm 30436 Reducing tee 35mm x 35mm x 15mm 30437 Reducing tee 35mm x 35mm x 22mm 30438 Reducing tee 35mm x 35mm x 28mm 30439 Reducing tee 42mm x 42mm x 15mm 30440 Reducing tee 42mm x 42mm x 22mm 30441 Reducing tee 42mm x 42mm x 28mm 30442 Reducing tee 42mm x 42mm x 35mm 30449 Reducing tee 54mm x 54mm x 15mm 30443 Reducing tee 54mm x 54mm x 22mm 30446 Reducing tee 54mm x 54mm x 28mm 30447 Reducing tee 54mm x 54mm x 35mm 30448 Reducing tee 54mm x 54mm x 42mm 30359 End caps 15mm 30360 End caps 22mm 30361 End caps 28mm 30362 End caps 35mm 30363 End caps 42mm 30364 End caps 54mm

Factor:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

View All Listings by this Company

Range of lever operated spherical valves with nickel plated brass (30726 & 30727 Models) or DZR brass (38838, 38839 & 38840) bodies, a chrome plated brass ball, PTFE seats and packing and EPDM ‘O’-rings. Maximum working pressure 16.0 Bar (30726 & 30727 Models) or 40.0 Bar (38838, 38839 & 38840 models). Maximum operating temperature 100°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2004081

Expiry date:

30/04/2025

Size:

See model

Marking:

Brymec Logo, DN, PN & Size on valve body Brymec on operating member Models 38838, 38839 & 38840 have CR mark on valve body

Installation Requirements:

R001

Model:

30726 - 3” BSP (F) 30727 - 4” BSP (F) Models Added October 2020: 38838 - size: 1 1/4” BSP (F) 38839 - 1 1/2” BSP (F) 38840 - size: 2” BSP (F)

Factor:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

View All Listings by this Company

Range of butterfly valves incorporating blue epoxy coated ductile iron bodies and discs, incorporating EPDM seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

2211352

Expiry date:

30/11/2027

Size:

DN 50, DN65, DN 80, DN100, DN 125, DN150, DN200, DN250, DN300, DN350, DN400.

Marking:

Brymec, PN, DN and technical info on data plate on body.

Installation Requirements:

R001

Model:

2" Ductile iron lugged & tapped butterfly valve 38942 CBF01-TL01 2 ½" Ductile iron lugged & tapped butterfly valve 38943 CBF01-TL01 3" Ductile iron lugged & tapped butterfly valve 38944 CBF01-TL01 4" Ductile iron lugged & tapped butterfly valve 38945 CBF01-TL01 5" Ductile iron lugged & tapped butterfly valve 38946 CBF01-TL01 6" Ductile iron lugged & tapped butterfly valve 38947 CBF01-TL01 8" Ductile iron lugged & tapped butterfly valve 38948 CBF01-TL01 10" Ductile iron lugged & tapped butterfly valve 38949 CBF01-TL01 12" Ductile iron lugged & tapped butterfly valve 38841 CBF01-TL01 2" Ductile iron wafer butterfly valve 38935 CBF01-TA01 2 ½" Ductile iron wafer butterfly valve 38936 CBF01-TA01 3" Ductile iron wafer butterfly valve 38937 CBF01-TA01 4" Ductile iron wafer butterfly valve 38938 CBF01-TA01 5" Ductile iron wafer butterfly valve 38939 CBF01-TA01 6" Ductile iron wafer butterfly valve 38940 CBF01-TA01 8" Ductile iron wafer butterfly valve 38941 CBF01-TA01 10" Ductile iron wafer butterfly valve 38820 CBF01-TA01 12" Ductile iron wafer butterfly valve 38827 CBF01-TA01

Factor:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

View All Listings by this Company

Range of pressfit connection spherical valves incorporating DZR brass bodies, PTFE seat and packing, NBR ‘O’-rings and various operating members: lever, lever lockable, T-handle and butterfly. For use with copper pipe (manufactured to BS EN 1057), stainless steel pipe (manufactured to BS EN 10312) and carbon steel pipe (ISO 4200 Groupe 1 Series 3). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2110137

Expiry date:

31/10/2026

Size:

See model.

Marking:

Brymec Logo, DN, PN, CR and size on valve body. Brymec on operating member.

Installation Requirements:

R001

Model:

38806 15mm x 15mm Press Fit DZR Brass Ball Valve 38807 22mm x 22mm Press Fit DZR Brass Ball Valve 38808 28mm x 28mm Press Fit DZR Brass Ball Valve 38809 35mm x 35mm Press Fit DZR Brass Ball Valve 38810 42mm x 42mm Press Fit DZR Brass Ball Valve 38811 54mm x 54mm Press Fit DZR Brass Ball Valve

Factor:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

View All Listings by this Company

Range of gate valves incorporating blue epoxy coated ductile iron body and EPDM gasket. Maximum working pressure 16 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

2301359

Expiry date:

31/01/2028

Size:

DN50, DN65, DN80, D100, DN125, DN150, DN200, DN250, DN300, DN350, DN400

Marking:

Brymec, Model, DN, PN on nameplate. DN, PN & DI on body.

Installation Requirements:

R001

Model:

Gate valves ductile iron 2" 38813 Gate valves ductile iron 2½" 38956 Gate valves ductile iron 3" 38957 Gate valves ductile iron 4" 38958 Gate valves ductile iron 5" 38959 Gate valves ductile iron 6" 38960 Gate valves ductile iron 8" 38961 Gate valves ductile iron 10" 38967 Gate valves ductile iron 12" 38834

Factor:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

View All Listings by this Company

Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1770 Taps

Section Subtitle:

Draining, metal or plastic - For above ground use only.

WRAS Approval Number:

2304090

Expiry date:

30/04/2028

Size:

See Models

Marking:

Brymec Logo, WRAS, Flow arrow and size on body.

Installation Requirements:

R001 R511

Model:

Brass Models (can be chrome plated or not): 30298: 15mm Drain off cock long spigot (15mm Spigot) 31150: 15mm Drain off cock (15mm Spigot) 31151: ½" Threaded drain off cock (15mm Spigot) 31149: ¾" Threaded drain off cock (3/4” BSP (M))

Factor:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

View All Listings by this Company

Range of pressure reducing valves (factory pre-set at 3.0 bar) but adjustable between 3.0-3.3 bar, with chromium plated DZR brass bodies incorporating an integral stainless-steel strainer. The products supplied with a gauge connection. Maximum inlet supply pressure 10.0 bar. Maximum operating temperature 85°C

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

1911085

Expiry date:

30/11/2024

Size:

see model

Marking:

Brymec Logo, CR, flow arrow, WRAS, PN and size on body.

Installation Requirements:

R001 R120

Model:

With gauge: 30973-15: 15mm Compression. 30973-22: 22mm Compression.

Factor:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

View All Listings by this Company