KEUCO GmbH & Co. KG Approvals


#1903317

Range of ceiling or wall mounted shower arms with brass bodies (various finishes - see model). Maximum working temperature 70°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1903317
Expiry date:
31/03/2024
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Keuco on faceplate
Installation Requirements:
R001 R040
Model:
51688 xxyyzz - shower arm for wall mounting, 53088 xxyyzz - shower arm for wall mounting. xx = 01 - chrome plated; 02 - polished bronze; 03 - brushed bronze; 04 - polished nickel; 05 - brushed nickel; 07 - stainless steel finish; 12 - polished black chrome; 13 - brushed black chrome & 17 - aluminium finish. yy = 03 - 300mm length; 04 - 450mm length. zz = 00 - rosette round; 02 - rosette square. 51689 xxyyzz - shower arm for ceiling mounting, 53089 xxyyzz - shower arm for ceiling mounting. xx = 01 - chrome plated; 02 - polished bronze; 03 - brushed bronze; 04 - polished nickel; 05 - brushed nickel; 07 - stainless steel finish; 12 - polished black chrome; 13 - brushed black chrome & 17 - aluminium finish. yy = 01 - 100mm length; 03 - 300mm length. zz = 00 - rosette round; 02 - rosette square.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#1907364

Wall mounted, concealed, thermostatic blending valve incorporating a thermostatic cartridge. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1907364
Expiry date:
31/07/2024
Note:
The 59553 000070 concealed thermostatic functional unit - rough part is not approved in its own right. This product does not incorporate a flow control device.
Size:
½” BSP (M)
Marking:
KEUCO on face plate. KEUCO P-IX28727/1C on operating member.
Installation Requirements:
R001 R010 R040
Model:
59553 000070 concealed thermostatic functional unit - rough part to be installed in conjunction with: 59553 xx00zz – IXMO (concealed thermostatic mixer - trim set) Model added November 2020: Edition 90 - 59053 xx0001 Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. ‘zz’ denotes rosette style and is replaced with either: 01 - rosette round or 02 - rosette squared.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#1911307

Wall mounted concealed three way diverter valve assembly (brass bodies with trim sets in various finishes). Using either a dome (00 handle) or single lever (10 handle) operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2050 Valves
Section Subtitle:
Diverter.
WRAS Approval Number:
1911307
Expiry date:
30/11/2024
Note:
The 59548 000070 concealed functional unit is not approved in its own right.
Size:
½” BSP (M)
Marking:
KEUCO on the rosette
Installation Requirements:
R001 R040
Model:
59548 xxyyzz Model added September 2020: Edition 90 - 59048 xx0001 Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. ‘yy’ denotes operating member and accessory. This can be replaced with: 00 - Handle IXMO Pure, 10 - Handle IXMO Comfort ‘zz’ denotes rosette style and is replaced with either: 01 - rosette round or 02 - rosette squared. To be installed in conjunction with the rough set: 59548 000070 - concealed functional unit.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#1911333

Wall mounted, concealed, shower control valve with a hose connection outlet and shower holder option, (brass bodies with trim sets in various finishes). Using either a dome (01 handle) or single lever (11 handle) operating member. The inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
1911333
Expiry date:
30/11/2024
Note:
This approval does not include a shower hose or shower handset. The 59541 000170 concealed functional unit is not approved in its own right.
Size:
½” BSP (M
Marking:
Keuco on rosette trim
Installation Requirements:
R001 R040
Model:
59541 xxyyzz – IXMO Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. ‘yy’ denotes operating member and accessory, this can be replaced with: 01 - Handle IXMO Pure 11 - Handle IXMO Comfort 02 - With integral shower handset holder and handle IXMO Pure 12 - With integral shower handset holder and handle IXMO Comfort ‘zz’ denotes rosette style and is replaced with either: 01 - rosette round or 02 - rosette squared. To be used in conjunction with the following concealed body: 59541 000170
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#1911334

Concealed brass bodied two way shower to shower diverter and stop valve (2 on, 1 off), with various trim set finishes and operating members. All products have a shower outlet connection, but only specific models incorporate a shower handset holder (see model). The shower outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
1911334
Expiry date:
30/11/2024
Note:
This approval does not include a shower hose and handset. The concealed body 59556 000170 is not approved in its own right.
Size:
½” BSP (M)
Marking:
Keuco on rosette
Installation Requirements:
R001 R040
Model:
59557 xxyyzz - IXMO 'xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. ‘yy’ denotes operating member and accessory, this can be replaced with: 01 - IXMO handle IXMO Pure, 02 - IXMO handle IXMO Pure with shower holder, 11 - handle IXMO Comfort or 12 - handle IXMO Comfort with shower holder. ‘zz’ denotes rosette style and is replaced with either: 01 - rosette round or 02 - rosette squared. To be used in conjunction with the following concealed body: 59556 000170
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#1911335

Concealed brass bodied two way shower to shower diverter and stop valve (2 on, 1 off), with various trim set finishes and operating members. Maximum working pressure 10.0 bar. Maximum working temperature 60°C

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
1911335
Expiry date:
30/11/2024
Note:
This approval does not include a shower hose and handset. The concealed body 59556 000070 is not approved in its own right.
Size:
½” BSP (M)
Marking:
Keuco on rosette trim
Installation Requirements:
R001 R040
Model:
59557 xxyyzz - IXMO. Model added September 2020: Edition 90 - 59057 xx0001 xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel finish, 17 - aluminium finish, 12 - polished black chrome, 13 - brushed black chrome. ‘yy’ denotes operating member and accessory, this can be replaced with: 00 - IXMO handle IXMO Pure, 10 - IXMO handle IXMO Comfort. ‘zz’ denotes rosette style and is replaced with either: 01 - rosette round, 02 - rosette squared. To be used in conjunction with the following concealed body: 59556 000070
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#1911343

Wall mounted, concealed, thermostatic shower valve, (brass bodies with trim sets in various finishes), incorporating a quarter turn ceramic disc headwork with a single lever operating member. Temperature is controlled independently by a thermostatic cartridge with a single lever operating member. The inlets each incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1911343
Expiry date:
30/11/2024
Note:
This approval does not include a shower hose and handset. The 59554 000170 - IXMO Solo thm - concealed thermostatic functional unit is not approved in its own right.
Size:
½” BSP (F)
Marking:
KEUCO on rosette
Installation Requirements:
R001 R010 R040
Model:
59554 xx00zz IXMO solo thm Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. ‘zz’ denotes rosette style and is replaced with either: 01 - rosette round, 02 - rosette squared, . 21 - as set with rosette round, 22 - as set with rosette squared. Models ending 01 & 02 must be installed in conjunction with the rough set, which is a separate item. Models ending 21 & 22 include this rough in set: 59554 000170 - IXMO Solo thm - concealed thermostatic functional unit.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2005306

Wall mounted concealed single lever basin mixer (brass body), having a ceramic cartridge headwork which control the flow and temperature with a lever type operating member. The spout outlet (chromium plated brass) incorporates an aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2005306
Expiry date:
31/05/2025
Note:
The concealed rough in part 59916 000070 is not approved in its own right.
Size:
½” BSP (F)
Marking:
Keuco on spout.
Installation Requirements:
R001 R010 R040
Model:
59016xxyyzz Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. ‘yy’ denotes trim plate: 02 – rosette round ‘zz’ denotes spout length: 00 - spout 219mm, 01 – spout 187mm, 02 spout 265mm
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2005307

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and single lever operating members, and the spout outlet incorporates a plastic aerator. The product can be supplied with or without a pop-up waste arrangement. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005307
Expiry date:
31/05/2025
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
Keuco on spout
Installation Requirements:
R001 R006 R009 R010
Model:
59002 xxyy00 – Edition 90 - 155 59002 xxyy03 – Edition 90 - 250 59004 xxyy00 – Edition 90 - 115 ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. yy denotes pop up waste: 00 - with pop up waste, 01 - without pop up waste
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2005335

Range of spout outlets with brass bodies (various finishes), EPDM ‘O’-rings and a plastic aerator. Maximum operating temperature 60°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
2005335
Expiry date:
31/05/2025
Note:
Open outlet use only.
Size:
½” BSP (M).
Marking:
Keuco on body.
Installation Requirements:
R001 R040
Model:
59045 XX 00 ZZ Edition 90 Where ‘XX’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. Where ‘ZZ’ denotes spout lengh, and is replaced with: 00 = 152mm, 01 = 202mm.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2005337

Range of ceiling mounted shower arms with brass bodies (various finishes) having a threaded connection at the outlet and incorporating EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2005337
Expiry date:
31/05/2025
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Keuco on shower arm
Installation Requirements:
R001 R040
Model:
59089 XXYY01 Edition 90 Where ‘XX’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. Where ‘XX’ denotes finish, and is replaced with: 01 - 100mm, 03 - 300mm.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2005336

Range of shower arms having brass bodies (various finishes) incorporating a threaded connection at the outlet and EPDM ‘O’-rings. Maximum operating temperature 70°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2005336
Expiry date:
31/05/2025
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Keuco on shower arm.
Installation Requirements:
R001 R040
Model:
59088 XXYY01 Edition 90 Where ‘XX’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. Where ‘YY’ denotes spout lengh, and is replaced with: 03 - 300mm, 04 - 450mm.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2012085

Range of shower handsets and shower heads with chrome plated bodies and built in flow restrictors. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2012085
Expiry date:
31/12/2025
Note:
Open outlet use only.
Size:
see model
Marking:
KEUCO ON HANDSET
Installation Requirements:
R001 R040
Model:
Shower handsets - ½” BSP (M): xx- finish 01 Chrome Plated 02 Polished Nickel 03 Brushed Bronze 04 Polished Nickel 05 Brushed Nickel 07 Stainless Steel Finish 12 Polished Black Chrome 13 Brushed Black Chrome 17 Aluminium Finish
Factor:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#2012305

Three-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating quarter turn ceramic disc headworks with dome (cube) type operating members. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic aerator. Product is supplied with stainless steel braided, PEX lined connection hoses and pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2012305
Expiry date:
31/12/2025
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections
Marking:
Keuco on spout.
Installation Requirements:
R001 R006 R009 R010
Model:
59015 xxyy00 Edition 90 – 3 hole basin mixer with pop-up waste. Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome 17 - aluminium finish. Where yy denotes: 00 supplied with pop-up waste 01 without pop-up waste
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2111313

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (brass body - various finishes, see model). Flow is controlled by a solenoid valve activated via an infra-red sensor. The product incorporates a manual temperature control operated by a single lever on the side of the body. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2111313
Expiry date:
30/11/2026
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
KEUCO on body
Installation Requirements:
R001 R006 R009 R010
Model:
51611xxyyzz - Elegenace Where: xx = finish: 01 - chrome plated. 02 - polished bronze. 03 - brushed bronze. 04 - polished nickel. 05 - brushed nickel. 07 - stainless steel finish. 12 - polished black chrome. 13 - brushed black chrome. 17 - aluminium finish. yy = pop-up waste: 00 - supplied with pop-up waste. 01 - without pop-up waste. zz = power supply: 00 - with battery 6V supply. 01 - with mains supply 230V (230V/6V).
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2201315

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a lever type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201315
Expiry date:
31/01/2027
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Keuco on body
Installation Requirements:
R001 R006 R009 R010
Model:
59509 xx1000 59509 xx2000 59509 xx3000 ‘xx’ denotes finish, and is replaced with: 01 - chrome plated 02 - polished bronze 03 - brushed bronze 04 - polished nickel 05 - brushed nickel 07 - stainless steel 12 - polished black chrome 13 - brushed black chrome 17 - aluminium finish 37 - black matt
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2201316

Range of wall mounted single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The external part is supplied with a concealed rough part for connection to water supplies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201316
Expiry date:
31/01/2027
Note:
Rough in set not approved in its own right.
Size:
½” BSP (F)
Marking:
Keuco on back plate
Installation Requirements:
R001 R010 R040
Model:
59516 xxy2zz 59516 xxy3zz 59916 000075 concealed rough part Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome 17 - aluminium finish. 37 - Black Matt Where ‘Y’ denotes spout projection, and is replaced with: 0 - 165mm 1 - 225mm Where “ZZ” denotes rosette and is replaced with: 01 - Round rosette 02 - Square roseete
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2201317

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and single lever operating members, and the spout outlet incorporates a plastic aerator. The product can be supplied with or without a pop-up waste arrangement. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201317
Expiry date:
31/01/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Keuco on body
Installation Requirements:
R001 R006 R009 R010
Model:
59502 xx1y00 59504 xx1y00 59510 xx1y00 59502 xx2y00 59504 xx2y00 59510 xx2y00 59502 xx3y00 59504 xx3y00 59510 xx3y00 ‘xx’ denotes finish, and is replaced with: 01 - chrome plated 02 - polished bronze 03 - brushed bronze 04 - polished nickel 05 - brushed nickel 07 - stainless steel 12 - polished black chrome 13 - brushed black chrome 17 - aluminium finish 37 - Black Matt y denotes pop up waste: 0 - with pop up waste 1 - without pop up waste
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2203351

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies with brass bodies (various finishes). Flow is controlled by a solenoid valve activated via an infra-red sensor either battery or power supply. The product incorporates a manual temperature control operated by a single lever on the side of the body. The inlet hoses incorporate an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2203351
Expiry date:
31/03/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Keuco on body
Installation Requirements:
R001 R006 R009 R010 R570
Model:
59511 xx1100 59512 xx1100 Where: xx = finish: 01 - chrome plated. 02 - polished bronze. 03 - brushed bronze. 04 - polished nickel. 05 - brushed nickel. 07 - stainless steel finish. 12 - polished black chrome. 13 - brushed black chrome. 17 - aluminium finish. 37 – black matt
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2210800

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product can be supplied with a pop-up waste (see model section) Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2210800
Expiry date:
31/10/2027
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Keuco on spout.
Installation Requirements:
R001 R006 R009 R010
Model:
Edition 11 single lever basin mixer with/without pop-up waste models: 51102 xxyyzz 51104 xxyyzz Where xx denotes finish and can be replaced by: 01 chrome plated 02 polished bronze 03 brushed bronze 04 polished nickel 05 brushed nickel 12 polished black chrome 13 brushed black chrome Where yy denotes with or withour pop-up waste: 00 with pop-up waste 01 without pop-up waste. Where zz denotes discharge height and can be replaced with: 00 discharge height is either 110mm (51104 model) or 150mm (51102 model) 03 discharge height is 250mm (51102 model only).
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.