KEUCO GmbH & Co. KG Approvals


#2005336

Range of shower arms having brass bodies (various finishes) incorporating a threaded connection at the outlet and EPDM ‘O’-rings. Maximum operating temperature 70°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2005336
Expiry date:
31/05/2025
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Keuco on shower arm.
Installation Requirements:
R001 R040
Model:
59088 XXYY01 Edition 90 Where ‘XX’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. Where ‘YY’ denotes spout lengh, and is replaced with: 03 - 300mm, 04 - 450mm.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2012085

Range of shower handsets and shower heads with chrome plated bodies and built in flow restrictors. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2012085
Expiry date:
31/12/2025
Note:
Open outlet use only.
Size:
see model
Marking:
KEUCO ON HANDSET
Installation Requirements:
R001 R040
Model:
Shower handsets - ½” BSP (M): xx- finish 01 Chrome Plated 02 Polished Nickel 03 Brushed Bronze 04 Polished Nickel 05 Brushed Nickel 07 Stainless Steel Finish 12 Polished Black Chrome 13 Brushed Black Chrome 17 Aluminium Finish
Factor:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#2012305

Three-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating quarter turn ceramic disc headworks with dome (cube) type operating members. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic aerator. Product is supplied with stainless steel braided, PEX lined connection hoses and pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2012305
Expiry date:
31/12/2025
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections
Marking:
Keuco on spout.
Installation Requirements:
R001 R006 R009 R010
Model:
59015 xxyy00 Edition 90 – 3 hole basin mixer with pop-up waste. Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome 17 - aluminium finish. Where yy denotes: 00 supplied with pop-up waste 01 without pop-up waste
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2111313

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (brass body - various finishes, see model). Flow is controlled by a solenoid valve activated via an infra-red sensor. The product incorporates a manual temperature control operated by a single lever on the side of the body. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2111313
Expiry date:
30/11/2026
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
KEUCO on body
Installation Requirements:
R001 R006 R009 R010
Model:
51611xxyyzz - Elegenace Where: xx = finish: 01 - chrome plated. 02 - polished bronze. 03 - brushed bronze. 04 - polished nickel. 05 - brushed nickel. 07 - stainless steel finish. 12 - polished black chrome. 13 - brushed black chrome. 17 - aluminium finish. yy = pop-up waste: 00 - supplied with pop-up waste. 01 - without pop-up waste. zz = power supply: 00 - with battery 6V supply. 01 - with mains supply 230V (230V/6V).
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2201315

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a lever type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201315
Expiry date:
31/01/2027
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Keuco on body
Installation Requirements:
R001 R006 R009 R010
Model:
59509 xx1000 59509 xx2000 59509 xx3000 ‘xx’ denotes finish, and is replaced with: 01 - chrome plated 02 - polished bronze 03 - brushed bronze 04 - polished nickel 05 - brushed nickel 07 - stainless steel 12 - polished black chrome 13 - brushed black chrome 17 - aluminium finish 37 - black matt
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2201316

Range of wall mounted single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The external part is supplied with a concealed rough part for connection to water supplies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201316
Expiry date:
31/01/2027
Note:
Rough in set not approved in its own right.
Size:
½” BSP (F)
Marking:
Keuco on back plate
Installation Requirements:
R001 R010 R040
Model:
59516 xxy2zz 59516 xxy3zz 59916 000075 concealed rough part Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome 17 - aluminium finish. 37 - Black Matt Where ‘Y’ denotes spout projection, and is replaced with: 0 - 165mm 1 - 225mm Where “ZZ” denotes rosette and is replaced with: 01 - Round rosette 02 - Square roseete
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2201317

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and single lever operating members, and the spout outlet incorporates a plastic aerator. The product can be supplied with or without a pop-up waste arrangement. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201317
Expiry date:
31/01/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Keuco on body
Installation Requirements:
R001 R006 R009 R010
Model:
59502 xx1y00 59504 xx1y00 59510 xx1y00 59502 xx2y00 59504 xx2y00 59510 xx2y00 59502 xx3y00 59504 xx3y00 59510 xx3y00 ‘xx’ denotes finish, and is replaced with: 01 - chrome plated 02 - polished bronze 03 - brushed bronze 04 - polished nickel 05 - brushed nickel 07 - stainless steel 12 - polished black chrome 13 - brushed black chrome 17 - aluminium finish 37 - Black Matt y denotes pop up waste: 0 - with pop up waste 1 - without pop up waste
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2203351

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies with brass bodies (various finishes). Flow is controlled by a solenoid valve activated via an infra-red sensor either battery or power supply. The product incorporates a manual temperature control operated by a single lever on the side of the body. The inlet hoses incorporate an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2203351
Expiry date:
31/03/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Keuco on body
Installation Requirements:
R001 R006 R009 R010 R570
Model:
59511 xx1100 59512 xx1100 Where: xx = finish: 01 - chrome plated. 02 - polished bronze. 03 - brushed bronze. 04 - polished nickel. 05 - brushed nickel. 07 - stainless steel finish. 12 - polished black chrome. 13 - brushed black chrome. 17 - aluminium finish. 37 – black matt
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2210800

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product can be supplied with a pop-up waste (see model section) Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2210800
Expiry date:
31/10/2027
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Keuco on spout.
Installation Requirements:
R001 R006 R009 R010
Model:
Edition 11 single lever basin mixer with/without pop-up waste models: 51102 xxyyzz 51104 xxyyzz Where xx denotes finish and can be replaced by: 01 chrome plated 02 polished bronze 03 brushed bronze 04 polished nickel 05 brushed nickel 12 polished black chrome 13 brushed black chrome Where yy denotes with or withour pop-up waste: 00 with pop-up waste 01 without pop-up waste. Where zz denotes discharge height and can be replaced with: 00 discharge height is either 110mm (51104 model) or 150mm (51102 model) 03 discharge height is 250mm (51102 model only).
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2211816

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (brass body, various finishes - see model), comprising of a concealed rough in set (brass) incorporating a ceramic cartridge headwork and a trim set consisting of a spout and a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2211816
Expiry date:
30/11/2027
Note:
The 59916 000070 rough in set is not approved in its own right.
Size:
½” BSP (F).
Marking:
Keuco on spout back plate.
Installation Requirements:
R001 R010 R040
Model:
51516 xxyyzz - Edition 400 trim set, which must be installed with the 59916 000070 rough in set. Where: xx = finish. 01 chrome plated, 02 polished bronze, 03 brushed bronze, 04 polished nickel, 05 brushed nickel, 12 polished black chrome, 13 brushed black chrome. yy = 02 rosette round. zz = spout projection. 00 - 219mm, 01 - 187mm, 02 - 265mm.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 4

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.