PPI Xiamen Industry Co Ltd Approvals


#2004314

Range of pillar taps (chromium plated brass) incorporating rising spindle headwork with cross top operating members. Incorporating a plastic flow straightnener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2004314
Expiry date:
30/04/2025
Size:
¾” BSP (M)
Marking:
PPI on rear of body
Installation Requirements:
R001 R005
Model:
M0602 & M0602A
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2004043

Range of wall mounted, concealed, thermostatic shower blending valves (chromium plated brass), incorporating a single sequential headwork controlling both temperature and flow using a single lever operating member. Both inlets incorporate a stainless-steel strainer and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate plastic flow regulators. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2004043
Expiry date:
30/04/2025
Size:
15mm compression
Marking:
PPI on underside of body.
Installation Requirements:
R001 R010 R040
Model:
800204A. 800204B.
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2005301

Two hole metal single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts, hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0503 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self cancelling diverter to shower.
WRAS Approval Number:
2005301
Expiry date:
31/05/2025
Size:
¾” BSP (M)
Marking:
PPI on body
Installation Requirements:
R001 R006 R030
Model:
M33275 Model added November 2020: M33275D
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2007806

Single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007806
Expiry date:
31/07/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
PPI on rear of body
Installation Requirements:
R001 R090
Model:
907015
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2005346

Range of two hole single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a non-rising spindle headwork with cross top operating members and a manually operated diverter to shower outlet. Products are supplied with a hose and handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2005346
Expiry date:
31/05/2025
Size:
¾” BSP (M)
Marking:
PPI on rear of main body.
Installation Requirements:
R001 R006 R020
Model:
M0605 & M0605A
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2004059

Range of non-rising spindle headworks (cast brass body) with EPDM ‘O’-rings and seat washer. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
WRAS Approval Number:
2004059
Expiry date:
30/04/2025
Size:
½” BSP (M)
Marking:
PPI 20 or 24 on headwork.
Installation Requirements:
R001
Model:
VS11-BZ20. VS11-BZ24. Models added July 2020: VS5412-BZ20 VS5412-BZ24
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2005345

Two hole single outlet (swivel) combination tap assembly (chromium plated brass body) with non rising spindle headwork and cross top operating members. Outlet incorporates a plastic flow straightener and the fitting is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005345
Expiry date:
31/05/2025
Size:
½” BSP (M)
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Model:
907009
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2010803

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated or white painted brass), incorporating quarter turn ceramic disc headworks and single lever type operating members. Outlets incorporates a plastic flow straightener. Maximum operating pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, swivel.
WRAS Approval Number:
2010803
Expiry date:
30/06/2025
Size:
15mm copper tails or stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006
Model:
M5010A, M5010A WH (white)
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2007024

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007024
Expiry date:
31/07/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Model:
193938
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2007332

Range of wall mounted, thermostatic shower valves with chromium plated brass body. Flow is controlled by a quarter turn ceramic disc headwork with single lever operating members. Temperature is controlled by a thermostatic cartridge with a dome type operating member which incorporates a manual override button. The inlets incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2007332
Expiry date:
31/07/2025
Size:
15mm Compression.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R040
Model:
804203 & 803203
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2011801

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating non-rising spindle headworks with dome type or cross top operating members. Both models are supplied with a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011801
Expiry date:
30/11/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Model:
M0417 & 147013
Factor:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2010042

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass & matt black finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Products are supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010042
Expiry date:
31/10/2025
Size:
Stainless steel braided EPDM lined hose assemblies with 1/2" captive nuts.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R005 R010
Model:
193738 193728 143328 Models added February 2022: 193738 MBK1 & 193728 MBK1.
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2010045

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass & matt black finishes) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2010045
Expiry date:
31/10/2025
Size:
¾” BSP (M)
Marking:
PPI on rear of tap body.
Installation Requirements:
R001 R005 R010
Model:
193706 Model added February 2022: 193706 MBK1
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2010323

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass). Incorporation a ceramic disc headwork with dome type operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010323
Expiry date:
31/10/2025
Size:
Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Model:
207121
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2010324

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass), incorporation a non-rising spindleheadwork with crosstop type operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010324
Expiry date:
31/10/2025
Size:
Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Model:
197021
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2010325

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass), incorporation a ceramic disc headwork with lever type operating members.The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010325
Expiry date:
31/10/2025
Size:
Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Model:
207125
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2011018

Two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass & matt black finish) incorporating a quarter turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlets incorporate a plastic flow straightener and the products are supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2011018
Expiry date:
30/11/2025
Size:
¾” BSP (M)
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R020
Model:
193705. Model added February 2022: 193705 MBK1.
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2012306

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork, single lever operating members and self- cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener & the products are supplied with metal backnuts. The product includes a shower hose and handset. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2012306
Expiry date:
31/12/2025
Size:
¾” BSP (M).
Marking:
PPI on rear of body.
Installation Requirements:
R001 R030
Model:
M1005
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2012311

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Models M4305, M4305E incorporate a non-rising spindle headwork with dome type operating members. Models M4305G & M4305F incorporate a non-rising spindle headwork with cross top operating members. Model M33135 incorporate a quarter turn ceramic disc headwork with single lever operating members. The fitting incorporates a manual diverter to the shower outlet The spout outlet incorporates a plastic flow straightener and the products are supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2012311
Expiry date:
31/12/2025
Size:
¾” BSP (M)
Marking:
PPI on body.
Installation Requirements:
R001 R020
Model:
M4305 M4305E M4305F M4305G M33135
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2110802

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet can incorporate either a plastic flow straightener or a plastic aerator. When supplied with a plastic flow straightener there is a combined EPDM washer and stainless steel strainer behind it. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2110802
Expiry date:
31/10/2026
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Model:
M9604 Models added September 2022 M9604 MBK1 M9604 BGP
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2110800

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet can incorporate either a plastic flow straightener or a plastic aerator. When supplied with a plastic flow straightener there is a combined EPDM washer and stainless steel strainer behind it. The product is available either as a version with a pop-up waste or one with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2110800
Expiry date:
31/10/2026
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Model:
M0308
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2110801

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet can incorporate either a plastic flow straightener or a plastic aerator. When supplied with a plastic flow straightener there is a combined EPDM washer and stainless steel strainer behind it. The products are available either as a version with a pop-up waste or one with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2110801
Expiry date:
31/10/2026
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Model:
M4008. M4008B. 900508. M1008. M1008MINI. M33178. M33218. M33238. M33238A. M33218EX. M33238EX.
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2106804

Self-closing basin tap assembly (chromium plated brass) incorporating spring loaded headwork and dome type operating members. The inlet incorporates a plastic flow restrictor and the spout outlet incorporates a plastic flow straightener. The product is supplied with a metal backnut. Maximum working pressure 10.0 bar. Maximum operating temperature 70ºC.

Section:
1820 Taps
Section Subtitle:
Self closing, metal.
WRAS Approval Number:
2106804
Expiry date:
30/06/2026
Size:
½” BSP (M).
Marking:
PPI on rear of body
Installation Requirements:
R001 R006
Model:
M96123
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2105804

Range of pillar taps with brass bodies (chrome plated), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener or aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2105804
Expiry date:
31/05/2026
Size:
See model
Marking:
PPI on rear of body.
Installation Requirements:
R001 R005
Model:
½” BSP (M) M33131 ¾” BSP (M) M33132
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2108801

Range of pillar taps with brass bodies (various finishes) incorporating non-rising spindle headworks using either dome type or cross top operating members. Spout outlets incorporate plastic flow straighteners. The products are also supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2108801
Expiry date:
31/08/2026
Size:
See model
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006
Model:
½” BSP (M) M4301 M4301E M4301F M4301G ¾” BSP (M) M4302 M4302E M4302F M4302G
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2012337

Range of pillar taps with brass bodies (various finishes) incorporating non-rising spindle headworks using either dome type or cross top operating members. Spout outlets incorporate plastic flow straighteners. The products are also supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2012337
Expiry date:
31/12/2025
Size:
See model
Marking:
PPI on rear of body.
Installation Requirements:
R001 R005
Model:
½” BSP (M) 902001H 902001F 902001F PVD ¾” BSP (M) 902002H 902002F 902002F PVD
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2109800

Range of two hole, single outlet, (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2109800
Expiry date:
30/09/2026
Size:
¾” BSP (M)
Marking:
PPI on body.
Installation Requirements:
R001 R006 R010
Model:
M33176 M33236 900506
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2108802

Range of two hole, single outlet, (fixed) combination tap assemblies (chromium plated brass), Models M33136 & M1006 incorporate a quarter turn ceramic disc headwork with single lever operating members. Models M4306, M4306E & M4306F incorporate a non rising spindle headwork with dome type operating members. Model M4306G incorporate a non rising spindle headwork with cross top operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. . Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2108802
Expiry date:
31/08/2026
Size:
¾” BSP (M)
Marking:
PPI on body.
Installation Requirements:
R001 R009 R010
Model:
M4306 M4306E M4306F M4306G M33136 M1006
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2012325

Range of EPDM braided hoses (various options) and optional end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2012325
Expiry date:
31/12/2025
Size:
See model
Marking:
PPI, WRAS & date of manufacture (YYYY) on crimp connector.
Installation Requirements:
R001
Model:
DN8 bore diameter hose. BZG-A-B-C-XXXX Where A-B-C-XXXX can be replaced by the following options: BZG – Connection A - Connection B – Outer braided material – Length A-B Connection A and Connection B (from 01 to 13): 01=F1/2 02=F1/2 Conical Connection 03=F3/8 04=F3/4 05=15mm compression fitting (17-100) 06=F15 07= F10 08= M8*1 (L=12-100) 09= M10*1 (L=12-100) 10= M12*1 (L=12-100) 11= M12*1 (two O ring) 12= M14*1 13=T connection (L=2-110) C= Outer braided material: SS = stainless steel wire. NY= grey or black nylon wire. SR= stainless steel wire plus red nylon wire. SB= stainless steel wire plus blue nylon wire. NR= grey or black nylon wire plus red nylon wire. NB= grey or black nylon wire plus blue nylon wire. XXXX Length (15cm to 200cm): 0150=15cm 2000=200cm For example: BZG-01-09-SS-0450 would be for F1/2 x M10, stainless steel braided, 45cm long.
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2105805

Range of pillar taps with brass bodies (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener or aerator (expect models M5001 and M5002). The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2105805
Expiry date:
31/05/2026
Size:
See model
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006
Model:
½” BSP (M) M5001 M33211 M33211 MBK1 M33171 M33231 ¾” BSP (M) M5002 M33232 M33172 M33272 M33212 M33212 MBK1
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2104020

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2104020
Expiry date:
30/04/2026
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Model:
204628. 204728. 204738.
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2104304

Wall bracket with a brass body (chrome plated) and EPMD ‘O’-rings. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2104304
Expiry date:
30/04/2026
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
PPI on body.
Installation Requirements:
R001 R040
Model:
N116-S
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2104317

Range of wall mounted bar type thermostatic shower valves (chromium plated or matt black coated brass) incorporating a manual diverter and quarter turn ceramic disc headwork controlling the flow between an overhead shower outlet or a shower handset with dome or cube type operating members. The temperature is controlled independently via a thermostatic cartridge with dome type operating member that also incorporates a manual override button. Models 801540 FF and 801540 FF MBK1 are also supplied with Fast Fit connections Both inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2104317
Expiry date:
30/04/2026
Note:
This approval does not include a shower hose and handset.
Size:
See Model
Marking:
PPI on rear of body.
Installation Requirements:
R001
Model:
801540 - ¾” Captive nut x ½” BSP (M) reducer 801540 MBK1 - ¾” Captive nut x ½” BSP (M) reducer 801540 FF – ¾” Captive nut x 15mm reducer 801540 FF MBK1– ¾” Captive nut x 15mm reducer
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2104321

Range of diverter valves with a plastic body and ceramic discs.For insertion into specifically dimensioned bores. Maximum working pressure 10 bar. Maximum operating temperature 85°C

Section:
2050 Valves
Section Subtitle:
Diverter.
WRAS Approval Number:
2104321
Expiry date:
30/04/2026
Size:
38.68mm OD
Marking:
PPI, model number, date of manufacture on body.
Installation Requirements:
R001
Model:
D37-01 D37-02 (longer stem/spindle)
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2105300

Range of overhead shower outlets (chrome plated plastic bodies). Inlets incorporate a strainer. Maximum operating temperature 85°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2105300
Expiry date:
31/05/2026
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
.PPI on body
Installation Requirements:
R001 R040
Model:
HS233 HS220 HS209 HS206
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2105001

Two-hole, single outlet, (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2105001
Expiry date:
31/05/2026
Size:
¾” BSP (M)
Marking:
PPI on rear of body.
Installation Requirements:
R001 R005 R030
Model:
M4005SL
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2105004

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and pull out spray. The spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2105004
Expiry date:
31/05/2026
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R090
Model:
907023
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2104024

Two hole, single outlet (fixed) combination tap assembly (chrome plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2104024
Expiry date:
30/04/2026
Size:
¾” BSP (M)
Marking:
PPI on rear of body
Installation Requirements:
R001 R006 R010
Model:
204606
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2104033

Range of two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating member and a manual diverter to the shower outlet. The products are supplied with a shower hose and handset. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2104033
Expiry date:
30/04/2026
Size:
¾” BSP (M)
Marking:
PPI on rear of body. PPI on shower handset.
Installation Requirements:
R001 R006 R020
Model:
204605. 204705.
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2104054

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disk headworks with cross top operating members. The spout outlet incorporates either a plastic aerator or a flow straighter. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2104054
Expiry date:
30/04/2026
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Model:
207130
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2111314

Range of single hole, single outlet (swivel) combination tap assemblies incorporating a ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a flow straightener. Supplied with optional aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2111314
Expiry date:
30/11/2026
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½" captive nut end connections.
Marking:
PPI on body
Installation Requirements:
R001 R006 R010
Model:
217015 & 217015A Model 217015 MBK1 added december 2022
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2111315

Wall mounted, thermostatic shower valve (chromium plated brass). Flow is controlled by a quarter turn ceramic disc headwork with single lever operating member. Temperature is controlled independently by a thermostatic cartridge with a cross-top operating member that incorporates a manual override button. The product is supplied with a shower rail and overhead shower. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2111315
Expiry date:
30/11/2026
Size:
15mm compression
Marking:
PPI on rear of body PPI on overhead shower
Installation Requirements:
R001 R010 R040
Model:
803203BAR1
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2110382

Range of ceramic disc headworks with brass bodies to be inserted into specifically dimensioned bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
0440 Headworks
WRAS Approval Number:
2110382
Expiry date:
31/10/2026
Size:
see models
Marking:
PPI ON BODY
Installation Requirements:
R001
Model:
VS21 3/4 CD valve VS03-D20-L1 H 3/4 CD valve VS03-D20-L1 C 3/4 CD valve VS03-D20-L2 H 3/4 CD valve VS03-D20-L2 C 3/4 CD valve VS01-C20-L H 1/2 CD valve VS01-C20-L C 1/2 CD valve VS01-C20-L2 H 1/2 CD valve VS01-C20-L2 C 1/2 CD valve VS01-C20-L3 H 1/2 CD valve VS01-C20-L3 C 1/2 CD valve VS01-C20-L4 H 1/2 CD valve VS01-C20-L4 C 1/2 CD valve VS01-C20-L6 C 1/2 CD valve VS01-C20-L6 H 1/2 CD valve VS02-C20K H 1/2 CD valve VS02-C20K C 1/2 CD valve VS02-C20-L H 1/2 CD valve VS02-C20-L C 1/2 CD valve VS09 H 1/2 CD valve VS09 C 1/2 CD valve
Factor:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2203323

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge or quarter turn ceramic disc headworks (see model) with single lever operating members. The spout outlet incorporates a flow straightener or optional aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2203323
Expiry date:
31/03/2027
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½ captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Model:
Ceramic cartridge models: 217020 217020 BN 217020 MBK1 217021 217021 BN 217021 MBK1 217071A 217070A Model added January 2023 217020 BGP Ceramic disc models: 217022 217027 Models added October 2022: 217022 MBK1 BN – Brushed Nickel MBK – Matt Black
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2204323

Range of shower handsets with chrome plated ABS plastic bodies. Maximum operating temperature 65°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2204323
Expiry date:
30/04/2027
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
PPI on body
Installation Requirements:
R001 R040
Model:
HS333 HS334 HS335
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2206304

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating a quarter turn ceramic disc headworks with either single lever, dome or cross-top operating members. The spout outlets incorporate plastic aerators or flow straighteners with a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2206304
Expiry date:
30/06/2027
Note:
R009 only applies to models supplied with PEX hoses.
Size:
Stainless steel braided EPDM or PEX lined flexible hoses with ½” BSP (F) captive nut end connections.
Marking:
PPI body.
Installation Requirements:
R001 R006 R009 R010
Model:
Models supplied with both variations of hose. 167019 - (chrome) 167019 MBK1 - (matt black) 167020 - (chrome) 167020 WH - (white) 167020A - (chrome) 167020F - (chrome) 167022 - (chrome) Models only supplied with stainless steel braided EPDM lined flexible hoses with ½” BSP (F) captive nut end connections. 167031 167031F
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2206317

Range of two hole, single outlet (swivel) combination tap assembly with brass bodies (chrome plated), incorporating quarter turn ceramic disc headworks and single lever operating members (model 1607023) or non-rising spindle headworks with dome type operating member (model 167021). The spout outlet incorporates a plastic aerator or plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2206317
Expiry date:
30/06/2027
Size:
1/2” BSP (M)
Marking:
PPI on rear body.
Installation Requirements:
R001 R006 R010
Model:
167021 & 167023
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2207029

Floor mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members and a manually operated diverter to shower outlet. The product is supplied with a shower hose and handset. The shower handset inlet incorporates a plastic flow restrictor. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2207029
Expiry date:
31/07/2027
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½" captive nut end connections.
Marking:
PPI on rear of tap.
Installation Requirements:
R001 R010 R040
Model:
179625
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2207032

Wall mounted, manual blending shower valve, (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members and a manual diverter to two shower outlets. The product is supplied with a shower riser, overhead shower rose, shower hose and handset. Each inlet incorporates a combined NBR washer and stainless-steel strainer, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum working temperature 60°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2207032
Expiry date:
31/07/2027
Size:
½" x ¾" offset union
Marking:
PPI On Body
Installation Requirements:
R001 R010 R040
Model:
201917
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2207033

Wall mounted, thermostatic shower valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a cross top operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. The product is supplied with a shower riser, overhead shower rose, shower hose and handset. The product incorporates a self-cancelling diverter on the shower riser. Each inlet incorporates a stainless-steel strainer, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2207033
Expiry date:
31/07/2027
Size:
15mm compression.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R010 R040
Model:
803203BAR2
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 4

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.