Range of single hole, single outlet (fixed) combination tap assembly (various finishes, see models), incorporating ceramic cartridge headworks with single lever operating members. The products incorporate self-cancelling diverters to shower outlets and plastic aerators in the spouts. Not supplied with hose and handset. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0465 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2212065

Expiry date:

31/12/2027

Size:

Stainless steel braided, thermoplastic silicone rubber (TPSiV) lined flexible hoses with 3/8" BSP captive nuts

Marking:

Hansgrohe on operating Member

Installation Requirements:

R001 R006 R030 R009

Model:

71 312 xxx 72 436 xxx 72 437 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of shower handsets with plastic bodies. The inlets incorporate a stainless-steel strainer and a built-in flow regulator. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2212066

Expiry date:

31/12/2027

Size:

½” BSP male inlet

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R040

Model:

28760210, 28787640, 28788570

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Model 32 020 000 is supplied with a pop-up waste. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2212067

Expiry date:

31/12/2027

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

32 020 xxx - Talis S (with Pop-up Waste). 32 031 xxx - Talis S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Single hole, metal, single outlet (swivel) combination tap assemblies (various finishes), incorporating a ceramic disc headwork controlling the temperature with a single lever operating member and a push on/off button cartridge controlling the flow. The spout outlet incorporates a plastic aerator. Supplied with a lever pop up waste. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2212071

Expiry date:

31/12/2027

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided, PEX lined hoses incorporating 3/8" BSP captive nuts

Marking:

AXOR on Body

Installation Requirements:

R001 R006 R010 R009

Model:

45 016 xxx Axor Uno Select basin mixer 220 with pop-up waste set available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of wall mounted, thermostatic shower valves with brass bodies (chrome plated finish), incorporating a ceramic disc headwork controlling the flow to an overhead or hand shower. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating a manual override button. The product also incorporates stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with a shower handset and hose. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2212072

Expiry date:

31/12/2027

Size:

¾” BSP (M) X ½” BSP (M) offset union.

Marking:

Hansgrohe on Body and on Hand shower Holder

Installation Requirements:

R001 R010 R040

Model:

27 247 400 Hansgrohe Croma Select S SemiPipe Multi with thermostat 27 248 400 Hansgrohe Croma Select E SemiPipe Multi with thermostat 27 249 400 Hansgrohe Croma Select S SemiPipe Multi EcoSmart with thermostat 27 259 400 Hansgrohe Croma Select E SemiPipe Multi EcoSmart with thermostat

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of exposed thermostatic shower valves with brass bodies (various finishes) incorporating a half turn ceramic disc headwork controlling the flow between 2 outlets, with the temperature being controlled independently via a thermostatic cartridge both with a single lever operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2212074

Expiry date:

31/12/2027

Size:

½” BSP (M)

Marking:

HANSGROHE on valve body, handset and overhead shower.

Installation Requirements:

R001 R010 R040

Model:

27 112 xxx Hansgrohe Raindance E Showerpipe 360 1jet with thermostat 27 112 400 Hansgrohe Raindance E Showerpipe 360 1jet with thermostat 27 134 xxx Hansgrohe Raindance E Showerpipe 360 1jet with thermostat Nordic 27 134 400 Hansgrohe Raindance E Showerpipe 360 1jet with thermostat Nordic Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of shower heads with plastic bodies (various finishes), incorporating plastic strainer or flow restrictor and EPDM o rings with stainless-steel strainers on the inlets. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2212078

Expiry date:

31/12/2027

Size:

½” BSP (M)

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R040

Model:

26 810 400 Hansgrohe Croma Select E Hand shower Multi 26 811 400 Hansgrohe Croma Select E Hand shower Multi EcoSmart 9 l/min 26 812 400 Hansgrohe Croma Select E Hand shower Vario 26 813 400 Hansgrohe Croma Select E Hand shower Vario EcoSmart 9 l/min 26 814 400 Hansgrohe Croma Select E Hand shower 1jet 26 815 400 Hansgrohe Croma Select E Hand shower 1jet EcoSmart 9 l/min 26 816 400 Hansgrohe Croma Select E Hand shower 1jet EcoSmart 7 l/min

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of two-hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes – see models) incorporating half turn manual diverter headworks with single lever operating members controlling the flow to an overhead shower and a bath spout with an off position and a self-cancelling diverter to shower outlet on the bath spout. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member with a manual override button. The spout outlet incorporates a plastic aerator, and the inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose, handset and an overhead shower. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0503 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, self cancelling diverter to shower.

WRAS Approval Number:

2212079

Expiry date:

31/12/2027

Size:

¾” BSP (M) to ½” BSP (M) Offset Unions

Marking:

Hansgrohe on body, shower head, and hand shower

Installation Requirements:

R001 R030

Model:

27 113 xxx 27 113 400 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Crometta 85 range of chrome plated plastic shower outlets, incorporating EPDM washers and flow regulator and stainless-steel strainer at the inlet.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2212080

Expiry date:

31/12/2027

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Hansgrohe on face.

Installation Requirements:

R001 R040

Model:

28 423 xxx 28 424 xxx 28 425 xxx xxx denotes the surface finish. It will always be 3 digits, which can be: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of overhead shower outlets with plastic bodies (various finishes), EPDM O-rings and a stainless-steel strainer. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2212081

Expiry date:

31/12/2027

Size:

For use with 01 800 180 basic set

Marking:

Hansgrohe on shower face.

Installation Requirements:

R001 R040

Model:

26 468 xxx Hansgrohe Raindance Select E Overhead shower 300 3jet with shower arm 26 468 400 Hansgrohe Raindance Select E Overhead shower 300 3jet with shower arm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe Wasselonne S.A.S

Company Name

Hansgrohe Wasselonne S.A.S

Address

Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company

Range of pillar taps (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating member. Spout oultlet incorporates a plastic aerator. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1800 Taps

Section Subtitle:

Pillar, metal.

WRAS Approval Number:

2212303

Expiry date:

31/12/2027

Size:

Stainless steel braided PEX lines flexible hose assembly incorporating 3/8 captive nut end connection.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006

Model:

72 503 xxx Hansgrohe Rebris S 72 506 xxx Hansgrohe Rebris E

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company

Range of shower outlets with brass bodies (various finishes). Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2212331

Expiry date:

31/12/2027

Size:

½” BSP (M)

Marking:

Axor on shower head

Installation Requirements:

R001 R040

Model:

AXOR once range: 48 790 xxx FixFit Showerpipe 48 791 xxx FixFit Showerset 48 792 xxx Fixfit Showerset (w/o handshower) 48 798 180 Basic Set FixFit Showerpipe

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company