Deck mounted, metal, single outlet (fixed) combination tap assemblies. Flow is controlled by a solenoid valve activated by via an infra-red sensor and temperature adjusted via a single lever operating member on model 36.452, models 36.451 &36.453 have a stainless-steel temperature mixing screw on the side of the body. The outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C
Grohe ‘GRT Special’ integrated trim set (chromium plated brass trim and face plate) which is intended for use with a concealed body (Rapido T 35.500) which incorporates a thermostatic for controlling the temperature and ceramic cartridge for controlling the flow. The trim set comprises of a rosette and dome type operating members. Both inlets incorporate an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (swivel) combination tap assemblies (in various finishes). Incorporating quarter turn ceramic disc headworks and cross top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C
Range of shower handsets with chrome plated plastic bodies. Some models incorporate a flow regulator. Maximum operating temperature 60°C
Range of wall or ceiling mounted shower outlets with chromium plated bodies and showers arms for installation with specific rough-in sets. The 26.484 model rough-in set incorporates a plastic flow regulator on the inlet. Maximum operating temperature 60°C.
Range of three-hole, single outlet (swivel) combination tap assemblies (in various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a pop-up waste. Maximum working pressure 10 bar. Maximum operating temperature 60°C.
Wall mounted, shower valve (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating member. The shower outlet incorporates an approved single check valve cartridge however the complete assembly has not been tested for backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with metal backnuts. Maximum working pressure 10 bar. Maximum operating temperature 60°C.
‘Eurocube E’ wall mounted, electronically operated combination tap assemblies (chromium plated brass) incorporating a solenoid valve controlling the flow which is actuated via in infrared sensor. The spout outlets incorporate a plastic aerator. Model 36.264.001 is an installation set intended for use with model 36.442. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Fully automatic electronic anti-leakage system. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of wall mounted, thermostatic blending valve shower set, incorporating a ceramic disc headwork with single lever operating member controlling and diverting the flow to either overhead shower outlet or shower handset. Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The overhead shower inlet incorporates a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic blending valve shower sets, incorporating a ceramic disc headwork with single lever operating member controlling and diverting the flow to either overhead shower outlet or shower handset (neither supplied). Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar Maximum operating temperature 60°C
Range of wall mounted, concealed thermostatic shower valves (chromium plated brass bodies). Flow is controlled to three separate outlets via a ‘detent’ (push on/push off) headwork that also incorporates a half turn ceramic disc (rotary control) to adjust the volume of water to either overhead shower, shower handset or both. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The hot and cold inlets within the valve body each incorporate a non-approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. This approval includes a shower hose, handset and overhead shower Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, two-hole, single outlet (fixed) combination tap assembly incorporating push button ‘detent’ headworks with one controlling flow to the bath outlet and the other controlling flow to the shower outlet. The temperature is controlled separately with a thermostatic cartridge with a manual override button. The spout outlet incorporates a plastic aerator. The shower outlet incorporates a single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, thermostatic blending valve (plastic body) with a trim set (chrome plated). Flow is controlled via ‘detent’ (push on/push off) headwork that also incorporates a ceramic disc (rotary control) to adjust the volume of water. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. Each inlet incorporates an approved single check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and shower handset. The inlet to the shower handset incorporates a plastic strainer and plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, two-hole, single outlet, fixed, combination tap assembly (chromium plated brass) incorporating ‘detent’ headworks (push on/push off) that incorporates a quarter turn ceramic disc (rotary control) to adjust flow. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The spout outlet incorporates a plastic aerator and the product is supplied with a shower hose and handset, as well as an overhead shower. Both shower outlets incorporate a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.
Range of wall mounted, concealed thermostatic shower valves, comprising of a concealed body and trim set (chrome plated brass), an overhead shower and a shower handset. The flow is controlled by a 3-position manual diverter with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, shower valve (chromium plated brass), incorporating a ceramic disc diverter with a dome type operating member controlling the flow between an overhead shower outlet and a shower hose and handset. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset incorporates a plastic strainer on the inlet. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork with A single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Grohe ‘RSH 310’ range of ceiling mounted or wall mounted shower outlets having brass arms. Shower heads incorporate a plastic filter and a plastic flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Page 1 of 8
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.