Range of wall mounted, manually operated shower valves (brass bodies – various finishes) Incorporating a ceramic cartridge headwork with a single lever operating member. The shower outlet incorporates a single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides suitable backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

250402054

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4" BSP (M) X 1/2" BSP (M) offset union

Marking:

Grohe logo on operating member

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

24.275.xx1 32.740.xx1 24.333.xx1 where xx1 denotes finish, can be replaced by: 001 – Chrome DC1 – Supersteel DA1 – Warm sunset AL1 – Brushed hard graphite GL1 – cool sunrise

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of wall and ceiling mounted overhead shower outlets, (plastic bodies – various finishes). Both models incorporate a built-in pressure regulator. Maximum operating temperature 85°C. Open outlet use only

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250402055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP M.

Marking:

GROHE logo on showerhead.

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

22121xxx - Grohe Rainshower Mono 310. Head shower set 422 mm, 1 spray. 22122xxx - Grohe Rainshower Mono 310. Head shower set ceiling 142 mm, 1 spray. Where xxx denotes finish, and can be replaced by the following: 000 – Chrome KF0 – phantom black

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of wall mounted shower valves (brass bodies – various finishes) incorporating a self-cancelling diverter with a ceramic cartridge headwork controlling flow and temperature and a single lever operating member. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

2003 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control, incorporating a self-cancelling diverter between outlets.

WRAS Approval Number:

250602018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP F

Marking:

Grohe logo on operating member

Installation Requirements:

R001 R030

Expiry date:

30/06/2030

Model:

24.336.xx1 32.747.xx1 29.079.xx1 001 – Chrome DC1 – Super steel DA1 – Warm sunset AL1 – Brushed hard graphite. GL1 – cool sunrise

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of wall or ceiling mounted shower outlets with chromium plated bodies (or black body for 22123KF0) consisting of showers arms and shower head for installation with specific rough-in sets. Shower head bodies incorporate approved single check valve cartridges, however, the complete assemblies have not been tested to demonstrate it provides backflow protection. The 26.484 model rough-in set incorporates a plastic flow regulator on the inlet. Maximum working pressure: Open Outlet. Maximum operating temperature: 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250602028

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Any flow rates claimed by the manufacturer have not been verified

Size:

½” BSP (F).

Marking:

Showerheads: Grohe on face. Concealed bodies: Grohe, Date of manufacture (YYMMDD), Made in Germany on adhesive label inside plastic shell, Grohe, DR and Flow arrows on brass body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

Grohe ‘RSH’ Cosmopolitan 310’ headshower sets 400mm: 26.475.xxx & 26.479.xxx. Grohe ‘RSH’ Smart Active 310’ headshower sets 400mm: 22123KF0 Concealed bodies (rough-in sets): 26.483 & 26.484 Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise LS0 – moon white A00 – hard graphite

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Phone

02372 930

View All Listings by this Company

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250702032

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP male.

Marking:

GROHE logo on top of spout

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2030

Model:

25.216.000

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of concealed stop-valve trim sets with (brass bodies - various finishes), incorporating a quarter turn ceramic disc headwork and single lever operating member. Maximum working pressure 10.0 Bar. Maximum operating temperature 23C.

Section:

2170 Valves

Section Subtitle:

Flow control, manually operated.

WRAS Approval Number:

250702047

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

For use with either concealed set 35.028.000 - ½” BSP (F) or 29.032.000 – ¾” BSP (F)

Marking:

Grohe, Germany and DOM (YYMM) on body

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

29.396.XXX, 29.397.XXX

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Phone

02372 930

View All Listings by this Company