Water Regulations Approval Scheme Ltd

Conex Universal Ltd Approvals

WRAS Approval Number: #1905363

>B< Sonic range of Brass & Copper push fit fittings incorporating EPDM rubber ‘O’-rings for use with copper pipe. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 1905363
Expiry date:: 31/05/2024
Size:: See model.
Marking:: >B< and size on fitting body.
Installation Requirements:: R001
Model:: 90° elbow (S090): 12 - 22mm. Equal tee (S130): 12x12x12mm - 22x22x22mm. Reducer branch tee (S130): 22x22x15mm. Straight coupler (S270): 12 - 22mm. Models added May 2019: Coupler 10mm - 28mm. Elbow 10mm - 28mm. Street Elbow 15mm. Equal Tee 10mm - 28mm. Tee - Reduced branch 22x22x15, 14x14x12, 16x16x12, 16x16x14 & 18x18x14. Tee - Reduced End & Branch 22x15x15. Tee - Reduced End 22x15x22. Tee - Reduced branch 28x28x22. Reduced Coupler 12x10mm, 14x12mm, 16x12mm & 16x14mm. Fitting Reducer 18x15mm, 22x18mm, 15x12mm, 15x10mm, 22x15mm & 28x22mm. Telescopic Connector - single leg 15mm, 18mm, 22mm & 28mm. Straight Connector – Male 15x1/2", 22x3/4", 28x1.1/4" & 28x1". Straight Connector – Female 15x1/2", 28x1.1/4", 22x3/4" & 28x1". Bent Tap Connector 15x1/2". Straight Tap Connector 15x1/2" Straight Tap Connector 22x3/4" Tee - With Female Branch 15x1/2"x15. Stop End 10mm, 15mm, 18mm & 22mm. Wall Plate Elbow 15x1/2". Models added November 2019: Straight Connector - Female 18x1/2 Straight Connector - Male 18x1/2 Street Elbow - 18mm, 22mm Male Elbow - 15x1/2 Female Elbow - 15x1/2 Reduced Coupler - 18x15, 22x15
Factor:: Conex Universal Ltd

Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company

WRAS Approval Number: #1907347

Range of Y pattern strainers having either brass or bronze bodies and PTFE seat washers. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1715 Strainers
WRAS Approval Number:: 1907347
Expiry date:: 31/07/2024
Size:: ½”, ¾”, 1”, 1 ½”, 2” BSP (F) x (F)
Marking:: Conex, size, PN rating and flow arrow on body. Conex Universal Ltd and size on data label
Installation Requirements:: R001 R120
Model:: IDC – 180210 (brass body) IDC – 180420 (bronze body)
Factor:: Conex Universal Ltd

Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company

WRAS Approval Number: #1909309

Range of vertical lift valves with bronze bodies and metal to metal seals Maximum working pressure 32 bar. Maximum operating temperature 85°C

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 1909309
Expiry date:: 30/09/2024
Size:: ½”, ¾”, 1”, 1¼”, 1½” & 2” female BSP inlet/outlet
Marking:: ‘Conex’, flow arrow, PN & Size, ‘GM’ on body
Installation Requirements:: R001
Model:: 1360 series 136020RR0320404 – ½” 136020RR0320606 – ¾” 136020RR0320808 – 1” 136020RR0321010 – 1 ¼” 136020RR0321212 – 1 ½” 136020RR0321616 – 2”
Factor:: Conex Universal Ltd

Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company
Manufacturer:: Zheijiang IDC Fluid Control

Company Name
Zheijiang IDC Fluid Control
Address
Mechanical & Electrical Industrial Zone Yuhuan
Postcode
China
General Email

View All Listings by this Company

WRAS Approval Number: #1911320

Range of spring loaded, resilient trim, non-return valves with brass bodies and EPDM seals. Maximum working pressure ½”, ¾”, 1” at 12 bar, 1 ¼”, 1 ½”, 2” at 10 bar. Maximum operating temperature: 85°C.

Section:: 2185 Valves
Section Subtitle:: Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.
WRAS Approval Number:: 1911320
Expiry date:: 30/11/2024
Size:: see model
Marking:: Conex, flow arrow, size and pressure rating on body
Installation Requirements:: R001
Model:: PN12: 145110FF0120404 – ½” BSP (F) 145110FF0120606 – ¾” BSP (F) 145110FF0120808 – 1” BSP (F) PN10: 145110FF0101010 – 1 ¼” BSP (F) 145110FF0101212 – 1 ½” BSP (F) 145110FF0101616 – 2” BSP (F)
Manufacturer:: Conex Universal Ltd

Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Phone
+44 121 5772831

View All Listings by this Company

WRAS Approval Number: #2003336

Range of brass bodied gate valve with PTFE gaskets. Valves can either have a lockshield or hand wheel operated mechanism. 112120 series have bronze taper threaded ends and 112210 series have brass female threaded ends. Maximum working pressure 20.0 bar. Maximum operating temperature 60°C.

Section:: 2290 Valves
Section Subtitle:: Stop, gate, metal.
WRAS Approval Number:: 2003336
Expiry date:: 31/03/2025
Size:: See model.
Marking:: Conex logo, size & pressure rating on body. Conex, pressure and other technical information on wheel.
Installation Requirements:: R001 R120
Model:: 112210RRW series operated by handwheel with female thread 112210RRW200404 1/2” 112210RRW200606 3/4” 112210RRW200808 1” 112210RRW201010 1 1/4” 112210RRW201212 1 1/2” 112210RRW201616 2” 112210RRK series operated by lockshield with female thread 112210RRK200404 1/2” 112210RRK200606 3/4” 112210RRK200808 1” 112210RRK201010 1 1/4” 112210RRK201212 1 1/2” 112210RRK201616 2” 112120RRW series operated by handwheel with taper thread 112120RRW200404 1/2” 112120RRW200606 3/4” 112120RRW200808 1” 112120RRW201010 1 1/4” 112120RRW201212 1 1/2” 112120RRW201616 2” 112120RRK series operated by lockshield with taper thread 112120RRK200404 1/2” 112120RRK200606 3/4” 112120RRK200808 1” 112120RRK201212 1 1/2” 112120RRK201616 2” 112120RRK203232 4”
Factor:: Conex Universal Ltd

Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company
Manufacturer:: Zheijang IDC Fluid Control.

Company Name
Zheijang IDC Fluid Control.
General Email

View All Listings by this Company

WRAS Approval Number: #2003348

Range of gate valves having brass bodies and a PTFE gasket. The valves either have a handwheel or lockshield operating mechanism. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:: 2290 Valves
Section Subtitle:: Stop, gate, metal.
WRAS Approval Number:: 2003348
Expiry date:: 31/03/2025
Size:: 2 ½” BSP (F)
Marking:: Conex, size and pressure on body.
Installation Requirements:: R001
Model:: 112210FFW202020 handwheel option 112210FFK202020 lockshield options
Factor:: Conex Universal Ltd

Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company
Manufacturer:: IDC FLUID CONTROL CO., LTD

Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou
General Email

View All Listings by this Company

WRAS Approval Number: #2006051

Range of DZR brass push fit fittings for use with copper pipe, PB pipe (manufactured to BS7291-2) & PEX pipe (manufactured to BS7291-3). When used with copper pipes the maximum working pressure is 16.0 bar. When used with plastic pipes the maximum working pressure is 6.0 bar. Maximum operating temperature 95°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2006051
Expiry date:: 30/06/2025
Size:: 15mm to 28mm pushfit. 15mm to 28mm shank. ½” to 1” BSP (M) or ½” to 1” BSP (F).
Marking:: Conex logo "B", size, DVGW and CR on socket collar.
Installation Requirements:: R001
Model:: BM8200G Bend Tap connector (pushfit x BSP (F); BM8002G 0150400 BM8002G 0150600 BM8002G 0160400 BM8002G 0200400 BM8002G 0220600 BM8002G 0250600 BM8002G 0260600 BM8090 Equal Elbow (pushfit x pushfit); BM8090 0150000 BM8090 0160000 BM8090 0180000 BM8090 0200000 BM8090 0220000 BM8090 0250000 BM8090 0260000 BM8090 0280000 BM8090G Female Elbow (pushfit x BSP (F)); BM8090G 0150400 BM8090G 0160400 BM8090G 0160600 BM8090G 0180400 BM8090G 0180600 BM8090G 0200600 BM8090G 0220400 BM8090G 0220600 BM8090G 0250600 BM8090G 0260600 BM8092G Male Elbow (pushfit x BSP (M)); BM8092G 0150400 BM8092G 0160400 BM8092G 0160600 BM8092G 0180400 BM8092G 0180600 BM8092G 0200600 BM8092G 0220600 BM8092G 0250600 BM8092G 0260600 BM8130 Equal Tee (pushfit x pushfit x pushfit); BM8130 0151515 BM8130 0161616 BM8130 0181818 BM8130 0201620 BM8130 0202020 BM8130 0221515 BM8130 0221522 BM8130 0221622 BM8130 0221818 BM8130 0221822 BM8130 0222215 BM8130 0222218 BM8130 0222222 BM8130 0252025 BM8130 0252525 BM8130 0262616 BM8130 0262626 BM8130 0281528 BM8130 0282228 BM8130 0282815 BM8130 0282822 BM8130 0282828 BM8130G Female Branch Tee (pushfit x BSP (F) x pushfit); BM8130G 0150415 BM8130G 0160416 BM8130G 0200420 BM8130G 0220422 BM8130G 0220622 BM8130G 0250625 BM8130G 0260626 BM8130G 0280828 BM8240 Reduced Coupling (pushfit x pushfit); BM8240 0161500 BM8240 0181500 BM8240 0201600 BM8240 0201800 BM8240 0221500 BM8240 0221800 BM8240 0252000 BM8240 0262000 BM8240 0282200 BM8240GTap Connector (pushfit x BSP (F); BM8240G 0150400 BM8240G 0150600 BM8240G 0160400 BM8240G 0200400 BM8240G 0220600 BM8240G 0250600 BM8240G 0260600 BM8240G 0260800 BM8243 range Fitting Reducer (pushfit x shank); BM8243 0181500 BM8243 0201600 BM8243 0221500 BM8243 0221800 BM8243G Straight Male Connector (pushfit x BSP (M)); BM8243G 0150400 BM8243G 0150600 BM8243G 0150800 BM8243G 0160400 BM8243G 0160600 BM8243G 0160800 BM8243G 0180400 BM8243G 0180600 BM8243G 0180800 BM8243G 0200400 BM8243G 0200600 BM8243G 0200800 BM8243G 0220600 BM8243G 0220800 BM8243G 0250400 BM8243G 0250600 BM8243G 0250800 BM8243G 0260600 BM8243G 0260800 BM8243G 0280800 BM8270 Equal Coupling (pushfit x pushfit); BM8270 0150000 BM8270 0160000 BM8270 0180000 BM8270 0200000 BM8270 0220000 BM8270 0250000 BM8270 0280000 BM8270G Straight Female Connector (BSP (F) x pushfit); BM8270G 0150400 BM8270G 0150600 BM8270G 0160400 BM8270G 0160600 BM8270G 0180400 BM8270G 0180600 BM8270G 0200400 BM8270G 0200600 BM8270G 0220400 BM8270G 0220600 BM8270G 0220800 BM8270G 0250400 BM8270G 0250600 BM8270G 0250800 BM8270G 0260600 BM8270G 0260800 BM8270G 0280800 BM8301 Stop End (pushfit x pushfit); BM8301 0150000 BM8301 0160000 BM8301 0180000 BM8301 0200000 BM8301 0220000 BM8301 0250000 BM8301 0260000 BM8301 0280000 BM8350 Tank Connector (pushfit x BSP (M)); BM8350 0150400 BM8350 0220400 BM8350 0280800 BM8472G Backplate Elbow (pushfit x BSP (F)); BM8472G 0150400 BM8472G 0160400 BM8472G 0180400 BM8472G 0180600 BM8472G 0200600 BM8472G 0220600
Factor:: Conex Universal Ltd

Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company
Manufacturer:: IDC Manufacturing Group

Company Name
IDC Manufacturing Group
Address
General Email

View All Listings by this Company

WRAS Approval Number: #2010316

Range of press fittings incorporating copper or copper alloy bodies and EPDM O’-rings for use with copper tube to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2010316
Expiry date:: 31/10/2025
Size:: See model.
Marking:: Conex logo >B< on body
Installation Requirements:: R001
Model:: Copper alloy: PIR4090G; - Threaded Elbow PIR4090G040400 – ½” x ½” BSP (M) PIR4090G060600 – ¾” x ¾” BSP (M) PIR4092G; - Press Elbow PIR4092G040400 – ½” x ½” BSP (M) PIR4092G060600 – ¾” x ¾” BSP (M) PIR4243G; - Male Adaptor PIR4243G040400 – ½” x ½” BSP (M) PIR4243G040600 – ½” x ¾” BSP (M) PIR4243G060400 – ¾” x ½” BSP (M) PIR4243G060600 – ¾” x ¾” BSP (M) PIR4243G080600 – 1” x ¾” BSP (M) PIR4243G080800 – 1” x 1” BSP (M) PIR4471G; - Female Wallplate Elbow PIR4471G040400 – ½” x ½” BSP (M) PIR4471G060600 – ¾” – ¾” BSP (M) PIR4473G; - Male Wall plate Elbow PIR4473G040400 – ½” BSP (M) PIR4270G; - Female Adaptor PIR4270G040400 – ½” x ½” BSP (M) PIR4270G060600 – ¾” x ¾” BSP (M) PIR4270G080800 – 1” x 1” BSP (M Copper: PIR5040; - 45° Street Elbow PIR5040 040000 – ½” BSP (M) PIR5040 060000 – ¾” BSP (M) PIR5040 080000 – 1” BSP (M) PIR5001; - 90° Street Bend PIR5001 040000 – ½” BSP (M) PIR5001 060000 – ¾” BSP (M) PIR5001 080000 – 1” BSP (M) PIR5240; - Reducing Coupler PIR5240 060400 – ¾” x ½” BSP (M) PIR5240 080400 – 1” x ½” BSP (M) PIR5240 080600 – 1” x ¾” BSP (M) PIR5130; - Tee Reduced PIR5130 060604 – ¾” x ¾” x ½” BSP (M) PIR5002; - 90° Bend PIR5002 040000 – ½” BSP (M) PIR5002 060000 – ¾” BSP (M) PIR5002 080000 – 1” V PIR5041; - 45° Elbow PIR5041 040000 – ½” BSP (M) PIR5041 060000 – ¾” BSP (M) PIR5041 080000 – 1” BSP (M) PIR5130; - Equal Tee PIR5130 040000 – ½” BSP (M) PIR5130 060000 – ¾” BSP (M) PIR5130 080000 – 1” BSP (M) PIR5270; - Coupler PIR5270 040000 – ½” BSP (M) PIR5270 060000 – ¾” BSP (M) PIR5270 080000 – 1” BSP (M) PIR5301; – Stop End PIR5301 040000 – ½” BSP (M) PIR5301 060000 – ¾” BSP (M) PIR5301 080000 – 1” BSP (M) PIR5130RB; - Tee Reduced Branch PIR5130 060406 – ¾” x ½” x ¾” BSP (M) PIR5130 080408 – 1” x ½” x 1” BSP (M) PIR5130 080608 – 1” x ¾” x 1” BSP (M) PIR5275; - Slip Coupler PIR5275 040000 – ½” BSP (M) PIR5275 060000 – ¾” BSP (M) PIR5275 080000 – 1” BSP (M) PIR5243; - Fitting Reducer PIR5243 060400 – ¾” x ½” BSP (M) PIR5243 080400 – 1” x ½” BSP (M) PIR5243 080600 – 1” x ¾” BSP (M) PIR5130REB - Tee Reduced End & Branch PIR5130 060404 – ¾” x ½” x ½” BSP (M) Models added February 2021: PIR5130 080806 – 1” X 1” X ¾” BSP (M) PIR5130 040604 – ½” X ¾” X ½” BSP (M) PIR5130 060806 – ¾“ X 1” X ¾” BSP (M) PIR5130 040804 – ½” X 1” X ½” BSP (M) PIR5130 080404 – 1” X ½” X ½” BSP (M) PIR5130 080604 – 1” X ¾” X ½” BSP (M) PIR5130 080406 – 1” X ½” X ¾” BSP (M)
Factor:: Conex Universal Ltd

Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company
Manufacturer:: IBP Atcosa SL

Company Name
IBP Atcosa SL
Address
General Email

View All Listings by this Company

WRAS Approval Number: #2010392

Range of gate valves incorporating bronze bodies and wedges with PTFE seals. The valves are operated via a non-rising spindle with a hand wheel operating member. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:: 2290 Valves
Section Subtitle:: Stop, gate, metal.
WRAS Approval Number:: 2010392
Expiry date:: 31/10/2025
Size:: ½” BSP (F) - 2” BSP (F).
Marking:: Size and PN20 on body. Conex Universal Ltd, PN20, MODEL, WRAS and other technical information on operating member.
Installation Requirements:: R001
Model:: 2121
Factor:: Conex Universal Ltd

Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company

WRAS Approval Number: #2008817

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:: 1715 Strainers
WRAS Approval Number:: 2008817
Expiry date:: 31/08/2025
Size:: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
Marking:: CONEX, size, pressure rating and flow arrow on body. WRAS, PRESSURE, PN ON DATAPLATE ON BODY
Installation Requirements:: R001
Model:: 1804 `Y`-PATTERNED STRAINERS
Factor:: Conex Universal Ltd

Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company