Section Code 1535 : Tap accessories.
Back To Directory SectionsConcealed, floor mounting basic set with DZR brass body for use with floor standing bath mixers. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Wall mounted bracket hand shower inlet assemblies having a brass body (chromium plated brass) Maximum operating temperature 60°C
Click type pop-up wastes with chromium plated brass (W003 & W007 models) or zinc (W033 model) bodies and a silicone seal. Models (W003, W033) also have a matte black finish and model (W003) has a brushed nickel finish. Supplied with a metal or plastic backnut.
Combined bath filler and overflow waste assembly incorporating a manual operated pop-up waste using a dome type operating member. The inlet incorporates an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate It provides backflow protection. Maximum operating temperature 60°C.
Range of rim and tile mounted bath basic sets, comprising of plastic chambers incorporating either a pull-out corrugated TPSiV lined shower hose with black outer sheath (28 010 xxx, 28 012 xxx, 28 020 xxx, 28 022 xxx models) or an integral stainless steel braided, silicone lined flexible hose assembly (13560180 and 15490180 models). The 28 010 xxx, 28 012 xxx, 28 020 xxx, 28 022 xxx models are supplied with finish sets in various finishes. The 28 010 xxx, 28 012 xxx, 28 020 xxx, 28 022 xxx models incorporate an approved check valve cartridge on each inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 70°C
Surface mounting kit for a mono block sink mixer with stainless steel braided EPDM lined flexible hose assembly with ½” captive nut end connections.The product is supplied with a 15x15mm compression single check valve assembly (suitable for backflow protection against Fluid Category 2) which also incorporates an isolation valve, intended for installation at each inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Coin type wastes with chromium plated brass body and rubber seal. Supplied with a plastic backnut.
Wall mounted shower arm with brass body (various finishes). Maximum operating temperature 85°C.
Ceiling mounted shower arm with brass bodies (various finishes) and faceplate. Maximum operating temperature 85°C.
In-wall concealed, manually accessible and operated hose connector incorporating a brass body, quarter turn ceramic disc headwork and operated by removable key. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of bidet spray kits comprising of a hand set with self-closing trigger, wall bracket and EPDM lined, brass interlocked flexible hose assembly. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.
Range of isolation valves incorporating brass bodies and EPDM ‘O’-rings. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Tap outlet with a silicone body. Maximum operating temperature 100°C.
Chrome plated brass quick connector with EPDM washer. Maximum operating temperature 60°C.
Range of bidet spray kits comprising of a hand set with self-closing trigger, wall bracket, flexible hose assembly, thermostatic blending valve and isolation valve. Maximum working pressure 5 bar. Maximum working temperature 60°C
Angle bracket with brass body (various finishes). The inlet incorporates an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of spout outlets with brass bodies (various finishes) incorporating an aerator. Product is supplied with either a lever type pop up (HIRONDELLE models) or click type waste (ICON-X & CORVAIR models). Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.
Spout end flow control device (aerator with ‘switchable’ spray formation). Maximum operating temperature 65°C.
Range of brass (chrome plated) quick fit connectors. Maximum operating temperature 60°C
Range of click type pop-up wastes with brass bodies. Maximum operating temperature 60°C.
Page 1 of 2
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
