Heaters

Section Code 1365 : Electric instantaneous, open outlet, mains fed.

Back To Directory Sections

#1907043

‘Aqualogic’ range of electric instantaneous heaters with stainless steel tanks. The flow is controlled via a solenoid valve (Model AQ4-1 Only). All other models operate using displacement. Maximum working pressure 1.5 bar. Maximum operating temperature 98˚C

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
1907043
Expiry date:
31/07/2024
Note:
R008 applies only to model AQ4-1
Size:
AQ4-1: 6mm push-fit. PRHWT1/3103253BL & KIT700: ⅜” BSP (
Marking:
Aqualogic on adhesive label on front cover of heater
Installation Requirements:
R001 R008 R009 R150
Model:
PRHWT1/3103253BL, KIT700 & AQ4-1
Factor:
Aqualogic NT Ltd
Company Name
Aqualogic NT Ltd
Address
Woodside House 20-23 Woodside Place Glasgow
Postcode
G3 7QF
Phone
+44(0)141 582 1399

View All Listings by this Company
Manufacturer:
Xiamen E-Tec Electric Shower Co. Ltd.
Company Name
Xiamen E-Tec Electric Shower Co. Ltd.
Address
No. 8 XinGuang Road, Haicang District, Xiamen Fujuan
Country
China,

View All Listings by this Company

Print This Approval


#1907311

Range of under counter electric instantaneous (near boiling) water heaters with stainless steel tank and either a stainless steel or titanium heating element with a 1.3kw or 2kw rating and silicone seals. Maximum working pressure 4.0 bar. Maximum operating temperature 98°C. Cold supply only

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
1907311
Expiry date:
31/07/2024
Size:
6mm push fit connection
Marking:
Intrix and Intrix logo, maximum pressure, serial number and model number on adhesive label on body
Installation Requirements:
R001 R007 R008 R040 R120
Model:
622TL8000 (IBWU 3 – 2.0T-L). 622TL8100 (IBWU 3 – 1.3T-L). 622TL8200 (IBWU 3 – 2.0S-L). 622TL8300 (IBWU 3 – 1.3S-L). Models added May 2021: 622TW9900 (IBWU E – 2.0T-W) 622TL9900 (IBWU E – 2.0T-L)
Manufacturer:
Thermo Integra Sdn Bhd
Company Name
Thermo Integra Sdn Bhd
Address
2A B JALAN TEKNOLOGI 3/5 SUNSURIA INDUSTRIAL PARK KOTA DAMANSARA PETALING JAYA SELANGOR

View All Listings by this Company

Print This Approval


#2104019

Range of unvented electric storage water heaters consisting of a mild steel, glass/enamel coated tank, heating element and pressure relief valve set at 6.0 bar. Maximum working pressure 5.5 bar. Maximum operating temperature 75°C.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2104019
Expiry date:
30/04/2026
Size:
½” BSP (M) inlets and outlets
Marking:
Hyco logo on front of appliance. Technical information on adhesive label on side of appliance.
Installation Requirements:
R001 R140
Model:
Unvented 2kW version: SF05K (5 litre), SF10K (10 litre) & SF15K (15 litre). Unvented 1.2kW version: SF10K12 (10 litre) & SF15K12 (15 litre).
Factor:
Hyco Manufacturing Ltd
Company Name
Hyco Manufacturing Ltd
Address
California Drive, Castleford, West Yorkshire
Postcode
WF10 5QH

View All Listings by this Company

Print This Approval


#1907084

Electric instantaneous heater with stainless steel tank. The flow is controlled via a solenoid valve. Maximum working pressure 1.5 bar. Maximum operating temperature 98˚C

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
1907084
Expiry date:
31/07/2024
Size:
6mm push-fit.
Marking:
Methven on adhesive label on front cover of heater
Installation Requirements:
R001 R008 R009 R150
Model:
RANGE OF ELECTRIC INSTANTANEOUS HEATER: 4N1 tank
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2203344

Electric instantaneous, vented mains water heater with plastic a housing and silicon rubber hose. Maximum operating temperature 98°C.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2203344
Expiry date:
31/03/2027
Note:
Open outlet use only.
Size:
½”BSP(M)
Marking:
Ellsi logo, model and product information on body.
Installation Requirements:
R001
Model:
PDT-000215
Factor:
Ellsi Ltd.
Company Name
Ellsi Ltd.
Postcode
DN15 8SL
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2204324

Under counter electric instantaneous water heater with a stainless steel tank. The flow is controlled via a solenoid valve. The product is supplied with a 3 way isolation valve (15mm compression x 15mm compression x ¾” BSP (M)), as well as a filter head and filter cartridge for installation prior to the under counter unit. LLDPE tubing and pushfit connections are provided for connecting between these items. The filter head inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet to the under counter unit incorporates a combined silicone washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.5 bar. Maximum operating temperature 98˚C. Cold water supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2204324
Expiry date:
30/04/2027
Note:
R120, R150 & R170 apply to the filter cartridge.
Size:
15mm compression (to 3 way inlet valve).
Marking:
Proboil.4E on front casing. Pressure, model, serial number and other technical information on adhesive label on rear of body.
Installation Requirements:
R001 R008 R120 R150 R170 R040
Model:
PROBOIL4E - model code: PT1030RMC.
Factor:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company

Print This Approval


#2207038

Range of electric instantaneous water heaters. The DEX and DCX models incorporate a spherical ball valve on the inlet. The CEX and DEX models incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet incorporates a strainer. Maximum working pressure 10 bar (DEX models only) All other models open outlet. Maximum operating temperature: ES3/4/5 and Zip Hydrotap G4/G5 ranges – 65ºC. CEX, DEX and DCX ranges - 70°C.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2207038
Expiry date:
31/07/2027
Size:
ES, Zip HydroTap and CEX models - ½” BSP male inlet and outlet. DEX and DCX models- 3/8” BSP captive nut inlet and outlet that connects to a valve with a ½” BSP male inlet.
Marking:
Zip inline and Clage on front cover. Zip inline, model, Maximum temperature and pressure and technical information on label on body.
Installation Requirements:
R001 R040
Model:
ES3 ES4 ES6 CEX CEX-U DEX12 NEXT DCX NEXT ZIP HydroTap G4 & G5 booster
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Clage GmbH
Company Name
Clage GmbH
Address
PIROLWEG 1 5 21337 LUENEBURG GERMANY

View All Listings by this Company

Print This Approval


#2210009

Electric, instantaneous, vented, mains water heaters with plastic housings and silicon gaskets. Model AQ5001353 incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum working pressure 1.5 bar.

Non-metallic materials and components comply with BS6920 at 98°C

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2210009
Expiry date:
31/10/2027
Size:
3/8" BSP male inlet x 3/8" BSP male outlet. Models added March 2023: ½” BSP male inlet x 3/8” BSP male outlet.
Marking:
Aqualogic NT on body. Pressure and model on adhesive label on rear of body.
Installation Requirements:
R001
Model:
AQ5001352 Models added Jan 2023: AQ5001353.
Factor:
Aqualogic NT Limited
Company Name
Aqualogic NT Limited
Address
20-23 Woodside Place, Glasgow
Postcode
G3 7QF
Country
United Kingdom
Phone
0141 582 1399

View All Listings by this Company

Print This Approval


#2210067

Electric, instantaneous, vented, mains water heaters with plastic housings and silicon gaskets. Incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum working pressure 1.5 bar.

Non-metallic materials and components comply with BS6920 at 98°C

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2210067
Expiry date:
31/10/2027
Size:
½” BSP male inlet x 3/8” BSP male outlet.
Marking:
PROBOIL.2X on body. Pressure and model on adhesive label on rear of body.
Installation Requirements:
R001
Model:
PROBOIL.2X
Factor:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company

Print This Approval


#2210068

Electric, instantaneous, vented, mains water heaters with plastic housings and silicon gaskets. Maximum working pressure 1.5 bar.

Non-metallic materials and components comply with BS6920 at 98°C

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2210068
Expiry date:
31/10/2027
Size:
3/8" BSP male inlet x 3/8" BSP male outlet.
Marking:
Reginox on body.
Installation Requirements:
R001
Model:
TRIBEZI / AMANZI TANK
Factor:
Reginox UK Ltd.
Company Name
Reginox UK Ltd.
Address
Units 1-4 Radnor Park Trading Estate, Back Lane, Congleton
Postcode
CW12 4XJ
Country
Cheshire

View All Listings by this Company

Print This Approval


#2306067

‘G5 BC’ range of command centres that provide instant near boiling and chilled water (both filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The products are supplied with a filter cartridge. The products can also be supplied with a hot water booster and/or a venturi system to provide mains cold water combined with water from the hot water tank (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 100˚C. Cold supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2306067
Expiry date:
30/06/2028
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection
Marking:
Zip and Hydrotap on body. ZIP, model and maximum pressure and technical information on adhesive label on inside of body.
Installation Requirements:
R001 R007 R008 R009 R040 R150 R170
Proviso:
The non ‘NS’ suffix models listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains models: H50084000UKNS: G5 BC Home M, H50002000UKNS: G5 BC20 M (with or without booster), H50004000UKNS: G5 BC60 M (with or without booster), H50084000UK: G5 BC Home M, H50002000UK: G5 BC20 M (with or without booster), H50004000UK: G5 BC60 M (with or without booster). Command Centre UK HydroTap Venturi models: H50092000UKNS: G5 BC Home H, H50021000UKNS: G5 BC20 H (with or without booster), H50023000UKNS G5 BC60 H (with or without booster), H50092000UK: G5 BC Home H, H50021000UK: G5 BC20 H (with or without booster), H50023000UK G5 BC60 H (with or without booster).
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200
Country
Australia

View All Listings by this Company

Print This Approval


#2306068

‘G5 BCS’ range of command centres that provide instant near boiling, sparkling and chilled water (all filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The products incorporate a pressure reducing valve (adjustable outlet pressure between 2.25 and 2.75 bar) on the supply to the carbonator unit. The carbonator inlet incorporates a non-return valve. The products are supplied with a filter cartridge. The products can also be supplied with a hot water booster and/or a venturi system to provide mains cold water combined with water from the hot water tank (see model). Maximum inlet supply pressure 5.0 bar. Maximum operating temperature 100˚C. Cold supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2306068
Expiry date:
30/06/2028
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and Hydrotap on body. Serial number containing date of manufacture (YYYY/MM/DD) and manufacturing code on adhesive label inside cover.
Installation Requirements:
R001 R007 R008 R009 R040 R160 R170
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains models: H50083000UK - G5 BCS Home M, H50060000UK - G5 BCS20 M (with or without booster), H50062000UK - G5 BCS60 M (with or without booster). Command Centre UK HydroTap Venturi models: H50090000UK - G5 BCS Home H, H50074000UK - G5 BCS20 H (with or without booster), H50075000UK - G5 BCS60 H (with or without booster).
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200
Country
Australia

View All Listings by this Company

Print This Approval


#2306069

‘G5 BCU60 UV’ Command centre that provides instant near boiling and chilled water (both filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combinations of solenoid valves and electronic pumps to the outlets. A UV unit is incorporated on the outlet from the chilled water tank. The products are supplied with a filter cartridge. The products can also be supplied with a hot water booster and/or a venturi system to provide mains cold water combined with water from the hot water tank (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 100˚C. Cold supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2306069
Expiry date:
30/06/2028
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and Hydrotap on front face of unit.
Installation Requirements:
R001 R007 R008 R008 R040 R0150 R170
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
H500U2000UK: G5 BCU60 UV Command Centre UK HydroTap
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200
Country
Australia

View All Listings by this Company

Print This Approval


#2309365

Range of under counter, vented, electric instantaneous (near boiling) water heaters with a stainless steel tank and silicone seals. Maximum operating temperature 98°C.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2309365
Expiry date:
30/09/2028
Note:
Open outlet use only.
Size:
8mm pushfit.
Marking:
E-Tec on adhesive label on rear of body.
Installation Requirements:
R001 R040
Model:
B132001 (Grey), B100-B-XXX (Black), B100-W-XXX (White).
Factor:
Xiamen E-Tec Electric Shower Co., LTD
Company Name
Xiamen E-Tec Electric Shower Co., LTD
Address
No.11, HaiJing East 2nd Road, Xiamen Area of China (Fujian) Pilot Free Trade Zone.

View All Listings by this Company

Print This Approval


#2310097

‘G5 B’ & ‘G5 BA’ ranges of command centres that provide instant near boiling (filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The products are supplied with a filter cartridge. The products can also be supplied with a venturi system to provide mains cold water combined with water from the hot water tank (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 100˚C. Cold supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2310097
Expiry date:
31/10/2028
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip logo on body. Serial number containing date of manufacture (YYYY/MM/DD) and manufacturing code on adhesive label inside cover.
Installation Requirements:
R001 R007 R008 R009 R040 R150 R170
Model:
Command Centre UK HydroTap Main Models: H50086000UK - G5 B Home M, H50006000UK - G5 B60 M (with or without booster) H50008000UK - G5 BA60 M (with or without booster). Command Centre UK HydroTap Venturi Models: H50091000UK - G5 B Home H H50056000UK - G5 B60 H (with or without booster).
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200
Country
Australia

View All Listings by this Company

Print This Approval


#2309373

Range of under counter, vented, electric instantaneous (near boiling) water heaters with a stainless steel tank and silicone seals. Maximum operating temperature 98°C.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2309373
Expiry date:
30/09/2028
Note:
Open outlet use only.
Size:
8mm pushfit.
Marking:
CARYSIL on body. Technical information on adhesive label on body.
Installation Requirements:
R001 R040
Model:
GCBHTTANK (Grey), CBHTTANK (Black), WCBHTTANK (White).
Factor:
CARYSIL BRASSWARE LTD
Company Name
CARYSIL BRASSWARE LTD
Address
20 WHITCLIFFE ROAD WEST YORKSHIRE
Postcode
BD19 3NU

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.