Expansion Vessels

Section Code 1000 :

Back To Directory Sections

#2109378

Expansion vessels incorporating a stainless steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100˚C.

Section:
1000 Expansion Vessels
WRAS Approval Number:
2109378
Expiry date:
30/09/2026
Size:
½” BSP (M)
Marking:
Aquasystem, model, serial No, date of manufacture (DD/MM/YYY) & other technical information on adhesive label on body.
Installation Requirements:
R001
Model:
XVES050005: 0.50L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP XVES050006: 1L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP XVES050007: 2L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company
Manufacturer:
Zilio Industries SPA
Company Name
Zilio Industries SPA
Address
Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
Country
Italy
Phone
[+39] 049 59 57 552

View All Listings by this Company

Print This Approval

#2110388

Range of expansion vessels with EPDM membrane and stainless steel flange connections. Maximum working pressure of 10.0 bar. Maximum operating temperature 100°C.

Section:
1000 Expansion Vessels
WRAS Approval Number:
2110388
Expiry date:
31/10/2026
Note:
Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum
Size:
½” BSP (M), ¾” BSP (M) & 1” BSP (M)
Marking:
Aquasystem & technical information on adhesive label on body.
Installation Requirements:
R001
Model:
XVES050020, 5L VERTICAL POT VESSEL WHITE PRE-SET 3.0 XVES050030, 8L VERTICAL POT VESSEL WHITE PRE-SET 3.0 XVES050031, 8L VERT POT VESSEL WHITE 3.5B XVES050036, 8L POT VESSEL INTER BRACKET PRE-SET 3.5 XVES050040, 12L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050041, 12L VERT POT VESSEL WHITE 3.5B XVES050042, 12L VERT POT VESSEL WHITE 2.2B XVES050045, 12L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050046, 12L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050047, 12L POTABLE VESSEL 4BAR W/ INT BRACKET XVES050050, 18L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050051, 18L VERT POT VESSEL WHITE 3.5B XVES050052, 18L VERT POT VESSEL WHITE 2.2B XVES050055, 18L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050056, 18L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050057, 18L POTABLE VESSEL 4.0BAR W/ BRACKET XVES050060, 24L VER POT VESSEL WHITE PRE-SET 3.0 XVES050061, 24L VERT POT VESSEL WHITE 3.5B XVES050062, 24L VERT POT VESSEL WHITE 2.2B XVES050065, 24L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050066, 24L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050067, 24L POTABLE VESSEL 4.0BAR W/ BRACKET XVES050075, 35L VERT POT VES WHITE PRE 3BAR C/W BRK XVES050080, 50L VERTICAL POT VESSEL BLUE PRE-SET 3.0
Manufacturer:
Zilio Industries SPA
Company Name
Zilio Industries SPA
Address
Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
Country
Italy
Phone
[+39] 049 59 57 552

View All Listings by this Company

Print This Approval

#2206051

Range of horizontal or vertical expansion vessels with an EPDM membrane. Maximum working pressure 10.0 or 16.0 bar (please refer to model). Maximum operating temperature 100°C.

Section:
1000 Expansion Vessels
WRAS Approval Number:
2206051
Expiry date:
30/06/2027
Size:
1” BSP (M), 1½” BSP (M) & 2” BSP (M).
Marking:
Zilio Industries Spa, AQUASYSTEM, model, max temp, max pressure CE and other technical information on label on body
Installation Requirements:
R001
Model:
Vertical models = maximum working pressure 10.0 bar: VA35 VAV50 VAV60 VAV80 VAV100 VAV150 VAV200 VAV300 VAV500 VAV750 VAV1000 AR35 Horizontal models = maximum working pressure 10.0 bar: VAO35 VAO50, VAO60, VAO80 VAO100, VAO150, VAO200 VAO300 Vertical models = maximum working pressure 16.0 bar: VB35 VBV50 VBV60 VBV80 VBV100 VBV150 VBV200 VBV300
Factor:
Zilio Industries SPA
Company Name
Zilio Industries SPA
Address
Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
Country
Italy
Phone
[+39] 049 59 57 552
General Email
info@zilioindustries.com

View All Listings by this Company

Print This Approval

#2207054

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

Section:
1000 Expansion Vessels
WRAS Approval Number:
2207054
Expiry date:
31/07/2027
Note:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
Please refer to model.
Marking:
CIMM, model, capacity, maximum operating pressure and other technical information on adhesive label on body.
Installation Requirements:
R001
Model:
AFE CE (35, 50, 60, 80, 100 & 150 Litres) Vertical: 10.0 Bar, 100°C, 1” BSP (M). AFE CE (200, 300, 450 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). AFESB CE (50, 60, 80, 100 & 150 Litres) Horizontal: 10.0 Bar, 100°C, 1” BSP (M). AFESB CE (200, 300 & 500 Litres) Horizontal: 10.0 Bar, 100°C, 1 ¼” BSP (M). SOLAR (8, 12, 16, 18 & 24 Litres): 10.0 Bar, 100°C, ¾” BSP (M). CAR 19 (162ml): 20.0 Bar, 100°C, ½” BSP (M). STYLE (0.5, 1, 2 & 3 Litres): 16.0 Bar, 100°C, ½” BSP (M). STYLE (4 & 5 Litres): 10.0 Bar, 100°C, ½” BSP (M). STYLE CE (6, 7 & 8 Litres): 10.0 Bar, 100°C, ½” BSP (M). STYLE CE (12, 15, & 18 Litres): 10.0 Bar, 100°C, ¾” BSP (M). AFE/CAR CE (35, 50, 60, 80, 100 & 150 Litres) Vertical: 16.0 Bar, 100°C, 1” BSP (M). AFE/CAR CE (200 & 300 Litres) Vertical: 16.0 Bar, 100°C, 1 ¼” BSP (M). ACS (1 & 2 Litres): 10.0 Bar, 100°C, ½” BSP (M). ACS (3, 4 & 5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). ACS CE (8, 12 & 16 Litres): 10.0 Bar, 100°C, ¾” BSP (M). ACS CE (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M). AFC (3 & 5 Litres): 8.0 Bar, 70°C, ¾” BSP (M). AFC CE (8, 12, 16, 18 & 24 Litres): 8.0 Bar, 70°C, ¾” BSP (M). AFC/CAR CE (8, 12, 18 & 24 Litres): 16.0 Bar, 100°C, ¾” BSP (M). AFOSB CE (20 & 24 Litres) Horizontal: 8.0 Bar, 100°C, 1” BSP (M). AF CE 24 (24 Litres): 8.0 Bar, 70°C, 1” BSP (M). AS CE 24 (24 Litres): 10.0 Bar, 100°C, 1” BSP (M). Models added September 2022: AFE CE (300, 450 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). AFESB CE (300 & 500 Litres) Horizontal: 10.0 Bar, 100°C, 1 ¼” BSP (M). AFE/CAR CE (200 & 300 Litres) Vertical: 16.0 Bar, 100°C, 1 ¼” BSP (M).
Manufacturer:
CIMM Spa
Company Name
CIMM Spa
Address
Via Caprera 13 31030 Castello di Godego (TV)
Country
Italy
Phone
+39 0423 760009 Fax: +39 0423 760041

View All Listings by this Company

Print This Approval

#2207308

Range of vertical expansion vessels with a butyl lining. Maximum working pressure 10 bar. Maximum operating temperature 70°C

Section:
1000 Expansion Vessels
WRAS Approval Number:
2207308
Expiry date:
31/07/2027
Size:
½” BSP(M)
Marking:
Reflex, Reflex Winkelmann GmbH, Type, Internal Volume, Pressure, Temp, Date of Manufacture (YYYY) and other technical information.
Installation Requirements:
R001
Model:
Refix DE 0.65 ltr. Refix DE 1 ltr.
Factor:
Reflex Winkelmann GmbH
Company Name
Reflex Winkelmann GmbH
Address
Gersteinstrasse 19, D-59227 Ahlen
Country
germany

View All Listings by this Company

Print This Approval

#2207063

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

Section:
1000 Expansion Vessels
WRAS Approval Number:
2207063
Expiry date:
31/07/2027
Note:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
Please refer to model.
Marking:
Flamco, Airfix, model, capacity, maximum operating pressure and other technical information on adhesive label on body.
Installation Requirements:
R001
Model:
AIRFIX P 35, AIRFIX P 50, AIRFIX P 60, AIRFIX P 80, AIRFIX P 100 & AIRFIX P 150 (35, 50, 60, 80, 100 & 150 Litres) Vertical: 10.0 Bar, 100°C, 1” BSP (M). AIRFIX P 200, AIRFIX P 300 & AIRFIX P 500 (200, 300, 450 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). AIRFIX P 50 HAIRFIX 60 H, AIRFIX P 80 HAIRFIX P 100 H & AIRFIX P 150 H (50, 60, 80, 100 & 150 Litres) Horizontal: 10.0 Bar, 100°C, 1” BSP (M). AIRFIX P 200 H, AIRFIX P 300 H & AIRFIX P 500 H (200, 300 & 500 Litres) Horizontal: 10.0 Bar, 100°C, 1 ¼” BSP (M). AIRFIX P 2 (2 Litres): 10.0 Bar, 100°C, ½” BSP (M). AIRFIX P 3 & AIRFIX P 5 (3 & 5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). AIRFIX P 8, AIRFIX P 12 & AIRFIX P 16 (8, 12 & 16 Litres): 10.0 Bar, 100°C, ¾” BSP (M). AIRFIX P 18 & AIRFIX P 24 (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M). AIRFIX P 24 H (24 Litres) Horizontal: 8.0 Bar, 100°C, 1” BSP (M).
Factor:
Flamco Limited
Company Name
Flamco Limited
Address
Washway Lane, St. Helens
Postcode
WA10 6PB
Phone
+44 (0) 1744 744 744
General Email
info@flamco.co.uk

View All Listings by this Company

Print This Approval

#2207064

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

Section:
1000 Expansion Vessels
WRAS Approval Number:
2207064
Expiry date:
31/07/2027
Note:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
Please refer to model.
Marking:
BOSS, WRAS, capacity, maximum operating pressure and other technical information on adhesive label on body.
Installation Requirements:
R001
Model:
BOSS 35, BOSS 50, BOSS 60, BOSS 80, BOSS 100 & BOSS 150 POTABLE EXPANSION VESSELS (35, 50, 60, 80, 100 & 150 Litres) Vertical: 10.0 Bar, 100°C, 1” BSP (M). BOSS 200, BOSS 300 & BOSS 500 POTABLE EXPANSION VESSELS (200, 300 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). BOSS 2 POTABLE EXPANSION VESSEL (2 Litres): 10.0 Bar, 100°C, ½” BSP (M). BOSS 5 POTABLE EXPANSION VESSEL (5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). BOSS 8 & BOSS 12 POTABLE EXPANSION VESSELS (8 & 12 Litres): 10.0 Bar, 100°C, ¾” BSP (M). BOSS 18 & BOSS 24 EXPANSION VESSELS (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M). BOSS 24 HORIZ POTABLE EXPANSION VESSEL (24 Litres) Horizontal: 8.0 Bar, 100°C, 1” BSP (M).
Factor:
BSS Industrial
Company Name
BSS Industrial
Address
BOSS Court 7 Barton Close
Postcode
LE19 1SJ
Country
Grove Park
Phone
01162 623232 Telex: 342761

View All Listings by this Company

Print This Approval

#2207065

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

Section:
1000 Expansion Vessels
WRAS Approval Number:
2207065
Expiry date:
31/07/2027
Note:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
Please refer to model.
Marking:
FLOMASTA, capacity, maximum operating pressure and other technical information on adhesive label on body.
Installation Requirements:
R001
Model:
FLOMASTA POTABLE EXPANSION VESSEL (2 Litres): 10.0 Bar, 100°C, ½” BSP (M). FLOMASTA POTABLE EXPANSION VESSEL (5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). FLOMASTA POTABLE EXPANSION VESSEL (8 & 12 Litres): 10.0 Bar, 100°C, ¾” BSP (M). FLOMASTA POTABLE EXPANSION VESSELS (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M).
Factor:
Kingfisher
Company Name
Kingfisher
Address
Castorama France Parc D'activite Rue de l'epinoy 59175 - Templemars
Country
France

View All Listings by this Company

Print This Approval

#2207066

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

Section:
1000 Expansion Vessels
WRAS Approval Number:
2207066
Expiry date:
31/07/2027
Note:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
Please refer to model.
Marking:
CENTER/ JET, WRAS, model, capacity, maximum operating pressure and other technical information on adhesive label on body.
Installation Requirements:
R001
Model:
597808 CENTER DOMESTIC POTABLE EXPANSION VESSEL (80 Litres) Vertical: S04912 *JET 50, S04913 *JET 60, S04914 *JET 80, S04915 *JET 100 & S04916 *JET 150 POTABLE EXPANSION VESSELS (50, 60, 80, 100, 150 Litres) Vertical 10.0 Bar, 100°C, 1” BSP (M). S04917 *JET 200, S04918 *JET 300 & S04919 *JET 500 POTABLE EXPANSION VESSELS (200, 300 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). 597801 CENTER SHOCK ARRESTOR(162ml): 20.0 Bar, 100°C, ½” BSP (M). . 597802 CENTER DOMESTIC POTABLE EXPANSION VESSEL (2 Litres): 10.0 Bar, 100°C, ½” BSP (M). 597803 CENTER DOMESTIC POTABLE EXPANSION VESSEL (5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). 597804 & 597805 CENTER DOMESTIC POTABLE EXPANSION VESSELS (8 & 12 Litres): 10.0 Bar, 100°C, ¾” BSP (M). 597806 & 597807 CENTER POTABLE EXPANSION VESSELS (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M).
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval

#2210343

Range of expansion vessels with galvanised or stainless-steel inlets, incorporating butyl rubber diaphragms. The inlet incorporates a plastic strainer (all models, except for WD model). For maximum working pressures please refer to model.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
1000 Expansion Vessels
WRAS Approval Number:
2210343
Expiry date:
31/10/2027
Note:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
Existing models and models added February 2023: ¾” BSP (M). Models added April 2023: 22mm compression.
Marking:
Existing models and models added February 2023: Reflex, address, pressure rating, volume, serial number and other technical information on an adhesive label on the body. Models added April 2023: Reflex, model, pressure rating, volume, year of manufacture (MM.YYYY) and other technical information on an adhesive label on the body.
Installation Requirements:
R001
Model:
The number in the model indicates capacity in litres: Refix DD 2: maximum working pressure 10 bar. Refix DD 4: 10 bar. Refix DD 7: 10 bar. Refix DD 8: 10 bar. Refix DD 12: 10 bar. Refix DD 18: 10 bar. Refix DD 8: 16 bar. Refix DD 12: 16 bar. Refix DD 8: 25 bar. Refix DT 2: 10 bar. Refix DE 2: 10 bar. Refix DE 4: 10 bar. Refix DE 8: 10 bar. Refix DE 12: 10 bar. Refix DE 18: 10 bar. Refix DE 8: 16 bar. Refix DE 12: 16 bar. Refix DE 8: 25 bar. Refix WD 0.165:10 bar. Models added February 2023: Refix DD Galv 2: 10 bar. Refix DD Galv 4: 10 bar. Refix DD Galv 7: 10 bar. Refix DD Galv 8: 10 bar. Refix DD Galv 12: 10 bar. Refix DE 18: 10 bar. Refix DE ‘E’ 2: 10 bar. Refix DE ‘E’ 4: 10 bar. Refix DE ‘E’ 8: 10 bar. Refix DE ‘E’ 12: 10 bar. Refix D DE ‘E’ 18: 10 bar. Models added April 2023: Refix DE 12 (M22C): 10 bar. Refix DE 18 (M22C): 10 bar.
Factor:
Reflex Winkelmann GmbH
Company Name
Reflex Winkelmann GmbH
Address
Gersteinstrasse 19, D-59227 Ahlen
Country
germany

View All Listings by this Company

Print This Approval

#2304338

Range of expansion vessels with a butyl membrane. Maximum working pressure 10 bar. Maximum operating temperature 99°C

Section:
1000 Expansion Vessels
WRAS Approval Number:
2304338
Expiry date:
30/04/2028
Size:
¾” male BSP
Marking:
Zilmet, model code, volume, serial no, date of manufacture (YY) and pressure rating on adhesive label.
Installation Requirements:
R001
Model:
11E0000800 - EASY-PRO 8 EXPANSION VESSEL – 8 litres 11E0001200 - EASY-PRO 12 EXPANSION VESSEL – 12 litres 11E0001800 - EASY-PRO 18 EXPANSION VESSEL – 18 litres 11E0002400 - EASY-PRO 24 EXPANSION VESSEL – 24 litres
Factor:
Zilmet UK Limited
Company Name
Zilmet UK Limited
Address
Airfield Industrial Estate, Hixon, Stafford
Postcode
ST18 0PF
Phone
01889 272 185
General Email
sales@zilmet.co.uk

View All Listings by this Company
Manufacturer:
Zilmet Spa
Company Name
Zilmet Spa
Address
35010 Limena (Padova) Via Del Santo 242 Italy
Phone
+ 49 8840662 Fax: + 49 767321 Telex: 430181
General Email

View All Listings by this Company

Print This Approval

#2206060

Range of horizontal or vertical expansion vessels with an EPDM membrane. Maximum working pressure 10.0 or 16.0 bar (please refer to model). Maximum operating temperature 100°C.

Section:
1000 Expansion Vessels
WRAS Approval Number:
2206060
Expiry date:
30/06/2027
Size:
1” BSP (M), 1½” BSP (M) & 2” BSP (M).
Marking:
Zilio Industries Spa, AQUASYSTEM, model, max temp, max pressure CE and other technical information on label on body
Installation Requirements:
R001
Model:
XVES050070 35L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050072 35L VERT POT VESSEL WHITE 2.2B XVES050075 35L VERT POT VES WHITE PRE 3BAR C/W BRK XVES050079 35L VERTICAL POT VESSEL 10BAR MAX 16. XVES050080 50L VERTICAL POT VESSEL BLUE PRE-SET 3.0 XVES050090 60L VERTICAL POT VESSEL BLUE PRE-SET 3.5 XVES050099 60L VERTICAL POT VESSEL 10BAR MAX 16 XVES050100 80L VERTICAL POT VESSEL BLUE PRE-SET 3.5 XVES050109 80L VERTICAL POT VESSEL 10BAR MAX 16 XVES050110 100L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050119 100L VERTICAL POT VESSEL 10BAR MAX 16 XVES050120 150L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050129 150L VERTICAL POT VESSEL 10BAR MAX 16 XVES050130 200L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050131 200L VERT POT VESSEL BLUE 2.1B XVES050139 200L VERTICAL POT VESSEL 10 BAR MAX 16 XVES050140 300L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050141 300L VERT POT VESSEL BLUE 2.1B XVES050149 300L VERTICAL POT VESSEL 10 BAR MAX 16 XVES050150 500L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050160 750L VERTICAL POT VESSEL RED PRE-SET 4.0 XVES050170 1000L VERTICAL POT VESSEL RED PRE-SET 4
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company
Manufacturer:
Zilio Industries SPA
Company Name
Zilio Industries SPA
Address
Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
Country
Italy
Phone
[+39] 049 59 57 552

View All Listings by this Company

Print This Approval

#2109069

Range of expansion vessels with stainless steel bodies incorporating a butyl rubber membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:
1000 Expansion Vessels
WRAS Approval Number:
2109069
Expiry date:
30/09/2026
Note:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
½” BSP (M).
Marking:
TFC Group, model number, max temperature, total volume and max pressure on body.
Installation Requirements:
R001
Model:
Stainless steel bodies: SA1/2
Factor:
TFC Group
Company Name
TFC Group
Address
Tower House, Vale Rise, Tonbridge
Postcode
TN9 1TB
Country
Kent

View All Listings by this Company

Print This Approval

#2310098

Range of expansion vessels with epoxy coated steel bodies and EPDM diaphragms. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Maximum operating temperature 70°C or 100°C (please refer to model).

Section:
1000 Expansion Vessels
WRAS Approval Number:
2310098
Expiry date:
31/10/2028
Note:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
2” or 2 ½” BSP (F)
Marking:
Cimm logo, model, pressure, capacity and other technical information on adhesive label on body.
Installation Requirements:
R001
Model:
Maximum working pressure 10.0 bar. Maximum operating temperature 100°C: AFE 750, AFE 1000 & AFE 1500. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C: AFE CE 750, AFE CE 1000 & AFE CE 1500. Maximum working pressure 8.0 bar. Maximum operating temperature 100°C: AFE CE 750 D.750.
Manufacturer:
CIMM Spa
Company Name
CIMM Spa
Address
Via Caprera 13 31030 Castello di Godego (TV)
Country
Italy
Phone
+39 0423 760009 Fax: +39 0423 760041

View All Listings by this Company

Print This Approval

#2310378

Range of shock arrestors with stainless steel bodies and EPDM diaphragm. Maximum working pressure 10 bar. Maximum operating temperature 70°C

Section:
1000 Expansion Vessels
WRAS Approval Number:
2310378
Expiry date:
31/10/2028
Size:
½” BSP(M).
Marking:
Flamco, Flexofit on body.
Installation Requirements:
R001
Model:
Flexofit. Flexofit without cap
Manufacturer:
Flamco Limited
Company Name
Flamco Limited
Address
Washway Lane, St. Helens
Postcode
WA10 6PB
Phone
+44 (0) 1744 744 744

View All Listings by this Company

Print This Approval

#2310115

Range of expansion vessels with epoxy coated steel bodies and EPDM diaphragms. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Maximum operating temperature 70°C or 100°C (please refer to model).

Section:
1000 Expansion Vessels
WRAS Approval Number:
2310115
Expiry date:
31/10/2028
Note:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
2” or 2 ½” BSP (F)
Marking:
Flamco, model, pressure, capacity and other technical information on adhesive label on body.
Installation Requirements:
R001
Model:
Maximum working pressure 10.0 bar. Maximum operating temperature 70°C: AIRFIX P 750, AIRFIX P 1000 & AIRFIX P 1500. Maximum working pressure 8.0 bar. Maximum operating temperature 100°C: AIRFIX P 750 (diam 750)
Factor:
Flamco Limited
Company Name
Flamco Limited
Address
Washway Lane, St. Helens
Postcode
WA10 6PB
Phone
+44 (0) 1744 744 744
General Email
info@flamco.co.uk

View All Listings by this Company

Print This Approval

#2310116

Range of expansion vessels with epoxy coated steel bodies and EPDM diaphragms. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Maximum operating temperature 70°C or 100°C (please refer to model).

Section:
1000 Expansion Vessels
WRAS Approval Number:
2310116
Expiry date:
31/10/2028
Note:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
2” or 2 ½” BSP (F)
Marking:
BOSS, model, pressure, capacity and other technical information on adhesive label on body.
Installation Requirements:
R001
Model:
Maximum working pressure 10.0 bar. Maximum operating temperature 70°C: BOSS 1000 Maximum working pressure 8.0 bar. Maximum operating temperature 100°C: BOSS.750.
Factor:
BSS Group Limited
Company Name
BSS Group Limited
Address
Ashcroft Way, Cross Point Business Park, Coventry
Postcode
CV2 2TU
Country
United Kingdom

View All Listings by this Company

Print This Approval

#2311071

Expansion vessel with stainless steel body and butyl membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C

Section:
1000 Expansion Vessels
WRAS Approval Number:
2311071
Expiry date:
30/11/2028
Size:
15mm compression
Marking:
Trappex logo and Centrashock on adhesive label on body.
Installation Requirements:
R001
Model:
Trappex Centrashock Trapshock12/DIA
Factor:
Trappex Ltd.
Company Name
Trappex Ltd.
Address
59 Springwood Hall Gardens, Huddersfield
Postcode
HD1 4HA
Country
United Kingdom
General Email
info@trappex.co.uk

View All Listings by this Company

Print This Approval

#2311913

Range of vertical expansion vessels with EPDM membranes and stainless-steel connections. Maximum working pressure: 15.0 bar (0,16 litre model), 10.0 bar (0,6 litre up to 2.0 litre models), 8.0 bar (5 litre up to 40 litre models).

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1000 Expansion Vessels
WRAS Approval Number:
2311913
Expiry date:
30/11/2028
Note:
(Note: Compression fittings not supplied with nut & olive)
Size:
1/2” BSP (M) for 0.16-2L M; 3/4”BSP (M) for 5-40L; 22mm for 0.16-40L)
Marking:
VAREM, year of production YYYY, model, PN, volume and further product information on adhesive label.
Installation Requirements:
R001 R530 R535
Model:
Extravarem LC: R1016 (0.16 litre) R1A06 (0.6 litre) R1001 (1 litre) R1002 (2 litres) R1005 (5 litres) R1008 (8 litres) R1012 (12 litres) R1018 (18 litres) R1025 (25 litres) R1035 (35 litres) R1040 (40 litres)
Manufacturer:
Varem S.p.a
Company Name
Varem S.p.a
Address
Via Sabbioni, 2 35024 Bovolenta (PD) Italy

View All Listings by this Company

Print This Approval

#1912999

TEST

Section:
1000 Expansion Vessels
WRAS Approval Number:
1912999
Expiry date:
31/12/2024
Note:
TEST
Size:
TEST
Marking:
TEST
Installation Requirements:
R001
Model:
TEST
Manufacturer:
WRAS TEST TEST TEST TEST
Company Name
WRAS TEST TEST TEST TEST
Address

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 2 of 3

© WRAS 2024 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.