Section Code 0490 : Single hole, metal, double outlet, swivel.
Back To Directory SectionsSingle hole, double outlet (swivel) combination tap assembly (brass body in various finishes) incorporating a ceramic cartridge headwork with single lever operating member. Electronic controls allow the tap to dispense ambient, boiling, chilled or sparkling water from undercounter units which are not included as part of this approval. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C (manual control side - ceramic cartridge) & 100°C (electronic control side).
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The taps also incorporate a self-closing headwork with a single lever operating member which is intended to be supplied by an instantaneous water heater (not included on this approval) to dispense near boiling water. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 98°C
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headworks on the left-hand side controlling the hot water flow, and a manual diverter on the right-hand side controlling the cold water flow (forward) or filtered water (backward) all with single lever operating members. The near boiling water flow is activated via a magnetic key fob being placed on the rear of the tap body (boiler unit not supplied). The spout outlet incorporates a plastic aerator. The hot and cold inlet hoses incorporate an approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with optional ⅜” BSP (M) x ½” BSP (F) adaptors for the hot and cold inlet hoses. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C for mixed (ambient hot and cold + filtered water), 98°C for near boiling water outlet.
Range of single hole, metal double outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork and a single lever type operating member controlling the mixed supply. Electronic controls allow the tap to dispense ambient and hot from under counter units which are not included as part of this approval. Spout outlets incorporate a plastic aerator and inlets incorporate stainless steel strainers. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C. From April 2020 the taps have a maximum operating temperature of 99°C.
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the hot water volume and a half turn ceramic disc headwork both controlling and diverting the supply between a mains cold inlet and alternative third supply - all using single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members controlling the cold water. Tap also has a quarter turn ceramic disc headwork using a dome type operating member incorporating a manual override button that is intended to control the flow of a boiling water supply (unit not supplied). The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature cold water circuit 60°C Maximum operating temperature hot water circuit 90°C
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork controlling the hot supply and a half turn ceramic disc headwork that controls and diverts the cold supply and an alternative inlet supply, both using single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single hole, double outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.
Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating non-rising spindle heads with dome type operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) with a non-rising spindle headwork operated by either dome (M0113CP) or cross top (M0113F & M06130) operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating non rising spindle headworks with dome type operating members. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C.
Single hole double outlet (swivel) combination tap assembly (white coated brass) incorporating non-rising spindle headworks using dome type operating members. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C.
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) with a non-rising spindle headwork operated by dome operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating non rising spindle headworks with dome type operating members. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C.
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated or white painted brass), incorporating quarter turn ceramic disc headworks and single lever type operating members. Outlets incorporates a plastic flow straightener. Maximum operating pressure 10.0 bar. Maximum operating temperature 70°C.
Range of single hole, double outlet (swivel) combination tap assemblies with brass bodies (various finishes) incorporating a quarter turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operaring temperature 60°C.
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) with a non-rising spindle headwork operated by either dome operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The taps also incorporate a self-closing headwork with a single lever operating member which is intended to be supplied by an instantaneous water heater (not included on this approval) to dispense near boiling water. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 98°C
Range of single hole, double outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating a non-rising spindle headwork with a dome type operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass). All models can be specified with either a non rising spindle headwork or a quarter turn ceramic disc headwork with dome (Tevere), cross top (Monaco) or single lever (Miura) operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the hot water volume and a half turn ceramic disc headwork both controlling and diverting the supply between a mains cold inlet and alternative third supply - all using single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The cold water inlet hose Incorporates approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 85°C.
Single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The cold water inlet hose Incorporates approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 85°C.
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The taps also incorporate a self-closing headwork with a single lever operating member which is intended to be supplied by an instantaneous water heater (not included on this approval) to dispense near boiling water. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 98°C
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork controlling the hot supply and a half turn ceramic disc headwork that controls and diverts the cold supply and an alternative inlet supply, both using single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The cold water inlet hose Incorporates approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.
Single hole, double outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic disc headworks with a single lever operating members.The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The cold water inlet hose Incorporates approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.
Range of single hole, double outlet (swivel) combination tap assemblies with brass bodies (chrome plated), incorporating quarter turn ceramic disk headworks with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single hole double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks with single level operating members Maximum working pressure 6.0 bar. Maximum operating temperature 85°C
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass). incorporating quarter turn ceramic disc headworks with single lever operating members or non-rising spindle headworks and dome type or cross top operating members (see model). The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
