Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101334

Size:

see model

Marking:

Dunshan Press and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

DS2001‐15 Equal coupling 15mm DS2001‐18 Equal coupling 18mm DS2001‐22 Equal coupling 22mm DS2001‐28 Equal coupling 28mm DS2001‐35 Equal coupling 35mm DS2001‐42 Equal coupling 42mm DS2001‐54 Equal coupling 54mm DS2002‐15 Adjustable coupling 15mm DS2002‐18 Adjustable coupling 18mm DS2002‐22 Adjustable coupling 22mm DS2002‐28 Adjustable coupling 28mm DS2002‐35 Adjustable coupling 35mm DS2002‐42 Adjustable coupling 42mm DS2002‐54 Adjustable coupling 54mm DS2003‐15 90° equal elbow 15mm DS2003‐18 90° equal elbow 18mm DS2003‐22 90° equal elbow 22mm DS2003‐28 90° equal elbow 28mm DS2003‐35 90° equal elbow 35mm DS2003‐42 90° equal elbow 42mm DS2003‐54 90° equal elbow 54mm DS2004‐15 90° plain elbow‐B 15mm DS2004‐18 90° plain elbow‐B 18mm DS2004‐22 90° plain elbow‐B 22mm DS2004‐28 90° plain elbow‐B 28mm DS2004‐35 90° plain elbow‐B 35mm DS2004‐42 90° plain elbow‐B 42mm DS2004‐54 90° plain elbow‐B 54mm DS2005‐15 45° equal elbow 15mm DS2005‐18 45° equal elbow 18mm DS2005‐22 45° equal elbow 22mm DS2005‐28 45° equal elbow 28mm DS2005‐35 45° equal elbow 35mm DS2005‐42 45° equal elbow 42mm DS2005‐54 45° equal elbow 54mm DS2006‐15 45° plain elbow‐B 15mm DS2006‐18 45° plain elbow‐B 18mm DS2006‐22 45° plain elbow‐B 22mm DS2006‐28 45° plain elbow‐B 28mm DS2006‐35 45° plain elbow‐B 35mm DS2006‐42 45° plain elbow‐B 42mm DS2006‐54 45° plain elbow‐B 54mm DS2007‐15 Equal tee 15mm DS2007‐18 Equal tee 18mm DS2007‐22 Equal tee 22mm DS2007‐28 Equal tee 28mm DS2007‐35 Equal tee 35mm DS2007‐42 Equal tee 42mm DS2007‐54 Equal tee 54mm DS2008‐18*15 Reducing tee 18mm×15mm DS2008‐22*15 Reducing tee 22mm×15mm DS2008‐22*18 Reducing tee 22mm×18mm DS2008‐28*15 Reducing tee 28mm×15mm DS2008‐28*18 Reducing tee 28mm×18mm DS2008‐28*22 Reducing tee 28mm×22mm DS2008‐35*15 Reducing tee 35mm×15mm DS2008‐35*18 Reducing tee 35mm×18mm DS2008‐35*22 Reducing tee 35mm×22mm DS2008‐35*28 Reducing tee 35mm×28mm DS2008‐42*15 Reducing tee 42mm×15mm DS2008‐42*18 Reducing tee 42mm×18mm DS2008‐42*22 Reducing tee 42mm×22mm DS2008‐42*28 Reducing tee 42mm×28mm DS2008‐42*35 Reducing tee 42mm×35mm DS2008‐54*15 Reducing tee 54mm×15mm DS2008‐54*18 Reducing tee 54mm×18mm DS2008‐54*22 Reducing tee 54mm×22mm DS2008‐54*28 Reducing tee 54mm×28mm DS2008‐54*35 Reducing tee 54mm×35mm DS2008‐54*42 Reducing tee 54mm×42mm DS2009‐15*Rp1/2 Female coupling 15mm×Rp1/2’’ DS2009‐22*Rp3/4 Female coupling 22mm×Rp3/4” DS2009‐28*Rp1 Female coupling 28mm×Rp1” DS2009‐35*Rp1 1/4 Female coupling 35mm×Rp1‐“1/4” DS2009‐42*Rp1 1/2 Female coupling 42mm×Rp1‐1/2” DS2009‐54*Rp2 Female coupling 54mm×Rp2” DS2010‐15*G1/2 Rotatable coupling 15mm×G1/2” DS2010‐18*G1/2 Rotatable coupling 18mm×G1/2” DS2010‐22*G3/4 Rotatable coupling 22mm×G3/4” DS2010‐28*G1 Rotatable coupling 28mm×G1” DS2010‐35*G1 1/4 Rotatable coupling 35mm×G1‐1/4” DS2010‐42*G1 1/2 Rotatable coupling 42mm×G1‐1/2” DS2010‐54*G2 Rotatable coupling 54mm×G2” DS2011‐15*R1/2 Male coupling 15mm×R1/2” DS2011‐18*R1/2 Male coupling 18mm×R1/2” DS2011‐22*R3/4 Male coupling 22mm×R3/4” DS2011‐28*R1 Male coupling 28mm×R1” DS2011‐35*R1 1/4 Male coupling 35mm×R1‐1/4” DS2011‐42*R1 1/2 Male coupling 42mm×R1‐1/2” DS2011‐54*R2 Male coupling 54mm×R2” DS2012‐15*Rp1/2 Female elbow 15mm×Rp1/2” DS2012‐18*Rp1/2 Female elbow 18mm×Rp1/2” DS2012‐22*Rp3/4 Female elbow 22mm×Rp3/4” DS2012‐28*Rp1 Female elbow 28mm×Rp1” DS2012‐35*Rp1 1/4 Female elbow 35mm×Rp1‐1/4” DS2012‐42*Rp1 1/2 Female elbow 42mm×Rp1‐1/2” DS2012‐54*Rp2 Female elbow 54mm×Rp2” DS2013‐15*R1/2 Male elbow 15mm×R1/2” DS2013‐18*R1/2 Male elbow 18mm×R1/2” DS2013‐22*R1/2 Male elbow 22mm×R1/2” DS2013‐22*R3/4 Male elbow 22mm×R3/4” DS2013‐28*R1 Male elbow 28mm×R1” DS2013‐35*R1 1/4 Male elbow 35mm×R1‐1/4” DS2013‐42*R1 1/2 Male elbow 42mm×R1‐1/2” DS2013‐54*R2 Male elbow 54mm×R2” DS2014‐15*Rp1/2 Female tee 15mm×Rp1/2” DS2014‐18*Rp1/2 Female tee 18mm×Rp1/2” DS2014‐22*Rp3/4 Female tee 22mm×Rp3/4” DS2014‐28*Rp1/2 Female tee 28mm×Rp1/2 DS2014‐28*Rp1 Female tee 28mm×Rp1” DS2014‐35*Rp1 1/4 Female tee 35mm×Rp1‐1/4” DS2014‐42*Rp1 1/2 Female tee 42mm×Rp1‐1/2” DS2014‐54*Rp2 Female tee 54mm×Rp2” DS2015‐15*R1/2 Male tee 15mm×R1/2” DS2015‐18*R1/2 Male tee 18mm×R1/2” DS2015‐22*R3/4 Male tee 22mm×R3/4” DS2015‐28*R1/2 Male tee 28 mm×R1/2’’ DS2015‐28*R1 Male tee 28mm×R1” DS2015‐35*R1 1/4 Male tee 35mm×R1‐1/4” DS2015‐42*R1 1/2 Male tee 42mm×R1‐1/2” DS2015‐54*R2 Male tee 54mm×R2” DS2016‐18*15 Reducer‐A 18mm×15mm DS2016‐22*15 Reducer‐A 22mm×15mm DS2016‐22*18 Reducer‐A 22mm×18mm DS2016‐28*15 Reducer‐A 28mm×15mm DS2016‐28*18 Reducer‐A 28mm×18mm DS2016‐28*22 Reducer‐A 28mm×22mm DS2016‐35*15 Reducer‐A 35mm×15mm DS2016‐35*18 Reducer‐A 35mm×18mm DS2016‐35*22 Reducer‐A 35mm×22mm DS2016‐35*28 Reducer‐A 35mm×28mm DS2016‐42*15 Reducer‐A 42mm×15mm DS2016‐42*18 Reducer‐A 42mm×18mm DS2016‐42*22 Reducer‐A 42mm×22mm DS2016‐42*28 Reducer‐A 42mm×28mm DS2016‐42*35 Reducer‐A 42mm×35mm DS2016‐54*42 Reducer‐A 54mm×42mm DS20107‐18*15 Reducer Coupling‐B 18mm×15mm DS20107‐22*15 Reducer Coupling‐B 22mm×15mm DS20107‐22*18 Reducer Coupling‐B 22mm×18mm DS20107‐28*15 Reducer Coupling‐B 28mm×15mm DS20107‐28*18 Reducer Coupling‐B 28mm×18mm DS20107‐28*22 Reducer Coupling‐B 28mm×22mm DS20107‐35*15 Reducer Coupling‐B 35mm×15mm DS20107‐35*18 Reducer Coupling‐B 35mm×18mm DS20107‐35*22 Reducer Coupling‐B 35mm×22mm DS20107‐35*28 Reducer Coupling‐B 35mm×28mm DS20107‐42*15 Reducer Coupling‐B 42mm×15mm DS20107‐42*18 Reducer Coupling‐B 42mm×18mm DS20107‐42*22 Reducer Coupling‐B 42mm×22mm DS20107‐42*28 Reducer Coupling‐B 42mm×28mm DS20107‐42*35 Reducer Coupling‐B 42mm×35mm DS20107‐54*15 Reducer Coupling‐B 54mm×15mm DS20107‐54*18 Reducer Coupling‐B 54mm×18mm DS20107‐54*22 Reducer Coupling‐B 54mm×22mm DS20107‐54*28 Reducer Coupling‐B 54mm×28mm DS20107‐54*35 Reducer Coupling‐B 54mm×35mm DS20107‐54*42 Reducer Coupling‐B 54mm×42mm

Approval Holder:

Wenzhou Dunshan EPT Co.,Ltd.

Company Name

Wenzhou Dunshan EPT Co.,Ltd.

Address

Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Manufacturer:

Wenzhou Dunshan EPT Co.,Ltd.

Company Name

Wenzhou Dunshan EPT Co.,Ltd.

Address

Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Range of polypropylene push-fit fittings and inserts for use with MDPE pipe (manufactured to BS EN 12201). For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101004

Size:

20mm & 25mm

Marking:

PN, JG and size on body

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

UG101B - 20 x 1/2" BSP MALE ADAPTOR UG102B - 25 x 3/4" BSP MALE ADAPTOR UG201B - 20mm EQUAL TEE UG202B - 25mm EQUAL TEE UG222025B - 20 x 25mm STEM ELBOW UG222525B - 25 x 25mm STEM ELBOW UG301B - 20mm EQUAL ELBOW UG302B - 25mm EQUAL ELBOW UG401B - 20mm EQUAL STRAIGHT CONNECTOR UG402B - 25mm EQUAL STRAIGHT CONNECTOR UG4501B - 20 x 1/2" FEMALE ADAPTOR UG4502B - 25 X 3/4" FEMALE ADAPTOR UG4620B - 20mm STOP END UG4625B - 25mm STOP END UG501B - 25 x 20mm REDUCING STRAIGHT CONNECTOR UG801E - 20mm PLUG UG802E - 25mm PLUG UGPWB1514 - 15 x 1/2" WING BACK ELBOW UGPWB2014 - 20 x 1/2" BACK PLATE ELBOW UGPWB2514 - 25 x 1/2" BACK PLATE ELBOW UGPWB2516 - 25 x 3/4" BACK PLATE ELBOW UTS147-DB - 20MM PIPE INSERT UTS197-DB- 25MM PIPE INSERT

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of polypropylene push-fit fittings with inserts for use with MDPE Pipe (manufactured to BS EN 12201-2) on one side of the fitting and PB (BS 7291), PEX (BS 7291) or Copper (BS EN 1057) on the other. Models UTS147-DB, UTS197-DB & UTS251-DB are for above and below ground use. All other models are for above ground use only. Maximum working pressure when using 20mm pipe is 16.0 bar. Maximum working pressure when using 25mm & 32mm pipe is 12.5 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101045

Marking:

PN, JG & size on protective cap.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Above ground use only. UG601B - 20 x 15MM PE-COPPER COUPLER. UG602B - 25 x 22MM PE-COPPER COUPLER. UG603B - 25 x 15MM PE-COPPER COUPLER. UG604B - 32 x 28MM PE-COPPER COUPLER. UG063228B - 32 X 28MM REDUCER. Above and below ground use. UTS147-DB - 20MM PIPE INSERT UTS197-DB - 25MM PIPE INSERT UTS251-DB - 32MM PIPE INSERT

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of crimp fittings with a bronze body incorporating EPDM O-rings. For use with copper pipe manufactured to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106010

Size:

See model.

Marking:

Conex Universal Limited logo: >B<, WRAS and size on fitting body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

HZ Valve adaptor: HZC625101: 15mm crimp joint X ½” BSP (M). HZC625102: 22mm crimp joint X ¾” BSP (M). HZC625103: 28mm crimp joint X 1” BSP (M). HZC625104: 35mm crimp joint X 1 ¼” BSP (M). HZC625105: 42mm crimp joint X 1 ½” BSP (M). HZC625106: 54mm crimp joint X 2” BSP (M).

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

IBP Instalfittings sp ZOO

Company Name

IBP Instalfittings sp ZOO

Address

General Email

View All Listings by this Company

Range of SUS316L & SUS304 stainless steel press fittings for use with stainless steel pipe manufactured to EN 10312. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107090

Size:

15mm - 108mm press-fit connections. ½” BSP (F) to 2” BSP (F). ½” BSP (M) to 2” BSP (M).

Marking:

SUMWIN, EN10312 and DN on body

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

Straight coupling (press fit) 4111111O, 1111111O, 4111221O, 1111221O, 4111331O, 1111331O, 4111441O, 1111441O, 4111551O, 1111551O, 4111661O, 1111661O, 4111881O, 1111881O, 4111991O, 1111991O, 4111AA1O, 1111AA1O. Reducing coupling (press fit) 4111211O, 1111211O, 4111321O, 1111321O, 4111431O, 1111431O, 4111541O, 1111541O, 4111651O, 1111651O, 4111861O, 1111861O, 4111961O, 1111961O, 4111981O, 1111981O, 4111A81O, 1111A81O, 4111A91O, 1111A91O. Female thread straight coupling (Press fit x BSP (F)) 4113111O, 1113111O, 4113221O, 1113221O, 4113331O, 1113331O, 4113441O, 1113441O, 4113551O, 1113551O, 4113661O, 1113661O, 4113211O, 1113211O, 4113321O, 1113321O, 4113431O, 1113431O, 4113541O, 1113541O, 4113651O, 1113651O. Male thread straight coupling (Press fit x BSP (M)) 4112111O, 1112111O, 4112221O, 1112221O, 4112331O, 1112331O, 4112211O, 1112211O, 4112321O, 1112321O, 4112441O, 1112441O, 4112551O, 1112551O, 4112661O, 1112661O, 4112541O, 1112541O, 4112651O, 1112651O. Flange coupling (Press fit) 41I4111O, 11I4111O, 41I4221O, 11I4221O, 41I4331O, 11I4331O, 41I4441O, 11I4441O, 41I4551O, 11I4551O, 41I4661O, 11I4661O, 41I4881O, 11I4881O, 41I4991O, 11I4991O, 41I4AA1O, 11I4AA1O. 90° elbow (Press fit) 4121111O, 1121111O, 4121221O, 1121221O, 4121331O, 1121331O, 4121441O, 1121441O, 4121551O, 1121551O, 4121661O, 1121661O, 4121881O, 1121881O, 4121991O, 1121991O, 4121AA1O, 1121AA1O. 90° ER reducing elbow (Press fit) 4121211O, 1121211O, 4121321O, 1121321O, 4121431O, 1121431O, 4121541O, 1121541O, 4121651O, 1121651O. 90° ED one-way elbow (Press fit) 4120111O, 1120111O, 4120221O, 1120221O, 4120331O, 1120331O, 4120441O, 1120441O, 4120551O, 1120551O, 4120661O, 1120661O. 90° EFZ Female thread short Elbow (Press fit x BSP (F)) 4124111O, 1124111O, 4124221O, 1124221O, 4124331O, 1124331O, 4124211O, 1124211O, 4124321O, 1124321O. 90° EF Female thread Elbow (Press fit x BSP (F)) 4123111O, 1123111O, 4123221O, 1123221O, 4123331O, 1123331O, 4123441O, 1123441O, 4123551O, 1123551O, 4123661O, 1123661O, 4123211O, 1123211O, 4123321O, 1123321O, 4123431O, 1123431O, 4123541O, 1123541O, 4123651O, 1123651O. EM Male thread Elbow (Press fit x BSP (M)) 4122111O, 1122111O, 4122221O, 1122221O, 4122331O, 1122331O, 4122441O, 1122441O, 4122551O, 1122551O, 4122661O, 1122661O, 4122211O, 1122211O, 4122321O, 1122321O, 4122431O, 1122431O, 4122541O, 1122541O, 4122651O, 1122651O. 45° Elbow (Press fit) 4141111O, 1141111O, 4141221O, 1141221O, 4141331O, 1141331O, 4141441O, 1141441O, 4141551O, 1141551O, 4141661O, 1141661O, 4141881O, 1141881O, 4141991O, 1141991O, 4141AA1O, 1141AA1O. 45° ED one-way Elbow (Press fit) 4140111O, 1140111O, 4140221O, 1140221O, 4140331O, 1140331O, 4140441O, 1140441O, 4140551O, 1140551O, 4140661O, 1140661O. Equal tee (Press fit) 4131111O, 1131111O, 4131221O, 1131221O, 4131331O, 1131331O, 4131441O, 1131441O, 4131551O, 1131551O, 4131661O, 1131661O, 4131881O, 1131881O, 4131991O, 1131991O, 4131AA1O, 1131AA1O. Reducing tee (Press fit) 4131211O, 1131211O, 4131311O, 1131311O, 4131321O, 1131321O, 4131431O, 1131431O, 4131541O, 1131541O, 4131651O, 1131651O, 4131861O, 1131861O, 4131961O, 1131961O, 4131981O, 1131981O, 4131A81O, 1131A81O, 4131A91O, 1131A91O. Female thread Tee (Press fit x BSP (F)) 4133111O, 1133111O, 4133221O, 1133221O, 4133331O, 1133331O, 4133441O, 1133441O, 4133551O, 1133551O, 4133661O, 1133661O, 4133211O, 1133211O, 4133321O, 1133321O, 4133431O, 1133431O, 4133541O, 1133541O, 4133651O, 1133651O. Male thread Tee (Press fit x BSP (M)) 4132111O, 1132111O, 4132221O, 1132221O, 4132331O, 1132331O, 4132441O, 1132441O, 4132551O, 1132551O, 4132661O, 1132661O, 4132211O, 1132211O, 4132321O, 1132321O, 4132431O, 1132431O, 4132541O, 1132541O, 4132651O, 1132651O. Adjustable straight (Press fit) 4116111O, 1116111O, 4116221O, 1116221O, 4116331O, 1116331O, 4116441O, 1116441O, 4116551O, 1116551O, 4116661O, 1116661O, 4116881O, 1116881O, 4116991O, 1116991O, 4116AA1O, 1116AA1O. Hex adaptor (BSP (F) 411L111O, 111L111O, 411L221O, 111L221O, 411L331O, 111L331O, 411L441O, 111L441O, 411L551O, 111L551O, 411L661O, 111L661O. Bridge (Press fit) 411Q111O, 111Q111O, 411Q221O, 111Q221O, 411Q331O, 111Q331O. Cap (Press fit) 4115111O, 1115111O, 4115221O, 1115221O, 4115331O, 1115331O, 4115441O, 1115441O, 4115551O, 1115551O, 4115661O, 1115661O.

Approval Holder:

Guangdong Sumwin New Material Group Co., Ltd.

Company Name

Guangdong Sumwin New Material Group Co., Ltd.

Address

Duichuan Industrial Zone, Yanghe Town, Gaoming Region, Foshan City, Guangdong

Country

China

View All Listings by this Company

Manufacturer:

Guangdong Sumwin New Material Group Co., Ltd.

Company Name

Guangdong Sumwin New Material Group Co., Ltd.

Address

Duichuan Industrial Zone, Yanghe Town, Gaoming Region, Foshan City, Guangdong

Country

China

View All Listings by this Company

Range of press fit fittings incorporating copper (GP5 models) or bronze (GP4 models) bodies and EPDM `O`-rings, for use with copper tube to EN 1057. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106017

Marking:

Taizhou Double Winner logo (dbw in a box) and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

GP5002 Bend 90: 12 - 54mm. GP5001 Bend 90 i/a: 12 - 54mm. GP5041 Bend 45: 12 - 54mm. GP5040 Bend 45 i/a: 12 - 54mm. GP5270 Straight Coupling: 12 - 54mm. GP5271 Straight Coupling: 12 - 54mm. GP5270S Sleeve Coupling: 12 - 54mm. GP5240 Reducing Coupling: 12 - 54mm. GP5243 Fitting Reducer: 12 - 54mm. GP5130 Equal Tee: 12 - 54mm. GP5301 Cap End: 12 - 54mm. GP5130 Reducing Tee: 12 - 54mm. GP5085 Full Crossover: 15 - 22mm. GP5086 Part Crossover: 15 - 22mm. GP4090 Elbow 90 Female: 15mm x 1/2” BSP (F) - 54mm x 2” BSP (F). GP4471 Wallplate Elbow: 15mm x 1/2” BSP (M) - 22mm x 3/4” BSP (M) GP4092 Elbow 90 Male: 15mm x 1/2” BSP (M) - 54mm x 2” BSP (M). GP4355 Tap Connector: 15mm x 1/2” BSP Captive Nut - 28mm x 1 1/4” BSP Captive Nut. GP4270 Female Adaptor: 15mm x 1/2” BSP (F) - 54mm x 2” BSP (F). GP4243 Male Adaptor: 15mm x 1/2” BSP (M) - 54mm (Crimp Joint) x 2” BSP (M). GP4130 Threaded Tee: 15mm x 1/2” BSP (M) x 15mm - 54mm x 1/2” BSP (M) x 54mm. GP4331 Straight Union: 15mm x 1/2” BSP (M) - 28mm x 1” BSP (M). GP4281 Female Adaptor: 15mm x 1/2” BSP (F) - 22mm x 3/4” BSP (F).

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

Room 902, No.185-1 Wenxue Road, Jiazhi Street, Jiaojiang, Taizhou, Zhejiang

Postcode

31800

Country

China

General Email

info@double‐winners.com

View All Listings by this Company

Unidelta range of compression fittings with polypropylene bodies with EPDM ‘O’ rings for use with PE100 polyethylene pipe (manufactured to EN12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2111701

Note:

For above and below ground use

Size:

20mm, 25mm, 32mm, 40mm, 50mm, 63mm

Marking:

Unidelta, pressure rating & size on the compression nut

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

Straight coupler (1001) Reducing coupler (1002) Male adapter (1003) Female adapter (1004) 90° Tee (1005) 90° Elbow (1006) 90° Tee with female threaded take off (1007) 90° Elbow with threaded male take off (1008) 90° Elbow with threaded female take off (1009) 90° Tee with threaded male take off (1010) End plug (1012) 90° reducing tee (1013) Repair slip coupler (1014) Female tee with peg fitting (1012) 90° Elbow with lateral thread take off (1023) 90° Tee with increased take off (1029) Wall plate elbow (1034)

Approval Holder:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Manufacturer:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106009

Size:

12mm - 108mm.

Marking:

Taizhou Double Winner logo (dbw in a box) and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

6270 & 6270CP Copper Press Coupling: 12 - 108mm. 6271 & 6271CP Copper Press Coupling: 12 - 54mm. 6240 & 6240CP Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 & 6243CP Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001& 6001CP Bend 90° x press: 12-108mm. 6002 & 6002CP Bend 90° press x press: 12 - 108mm. 6130 & 6130CP Equal Tee 3 x press: 12 - 108mm. 6040 & 6040CP Bend 45° x press: 12 - 108mm. 6041& 6041CP Bend 45° press x press: 12 - 108mm. 6301 & 6301CP Endcap press: 12 - 108mm. 6131 & 6131CP Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 & 6085CP Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 & 6086CP Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 & 6510CP Flange PN16: 76.1mm. Chrome plated models added 02/06/2023

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

Room 902, No.185-1 Wenxue Road, Jiazhi Street, Jiaojiang, Taizhou, Zhejiang

Postcode

31800

Country

China

General Email

info@double‐winners.com

View All Listings by this Company

Range of M type press fittings with TP2 copper bodies and EPDM ‘O’-rings, for use with TP2 copper pipe to EN1057. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2110321

Size:

See model.

Marking:

Hailiang and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

EKYH0000, STRAIGHT COUPLING WITH GROOVE CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0002, SLIP COUPLING CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0003, REDUCING COUPLING CXC: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0004, FITTING REDUCER FXC: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0005, COPPER FEMALE ADAPTOR: S15*1/2FC‐G S22*3/4FC‐G S28*1FC‐G S35*1 1/4FC‐G S42*1 1/2FC‐G S54*2FC‐G Note: FC‐G is female BSPP EKYH0006, COPPER MALE ADAPTOR: S15*1/2MC‐ZG S15*3/4MC‐ZG S22*3/4MC‐ZG S22*1MC‐ZG S28*1MC‐ZG S35*1 1/4MC‐ZG S42*1 1/2MC‐ZG S54*2MC‐ZG Note: MC‐ZG is male BSPT EKYH0012, EXTENDED SLIP COUPLING CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0100, 90DEG ELBOW CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0101, 90DEG STREET ELBOW FTGXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0104, REDUCER ELBOW: 22mm*15mm 28mm*15mm 28mm*22mm EKYH0130, 45DEG ELBOW CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0131, 45DEG STREET ELBOW FTGXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0166, CROSSOVER CXC:15mm, 22mm, 28mm EKYH0167, PART CROSSOVER FTGXC: 15mm, 22mm, 28mm EKYH0201, EQUAL TEE CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0202, REDUCING TEE: 22mm*22mm*15mm 28mm*28mm*15mm 28mm*22mm*15mm 35mm*35mm*15mm 35mm*35mm*22mm 35mm*35mm*28mm 42mm*42mm*15mm 42mm*42mm*22mm 42mm*42mm*28mm 42mm*42mm*35mm 54mm*54mm*15mm 54mm*54mm*22mm 54mm*54mm*28mm 54mm*54mm*35mm 54mm*54mm*42mm 22mm*15mm*15mm 22mm*15mm*22mm 28mm*15mm*15mm 28mm*15mm*22mm 28mm*15mm*28mm 28mm*22mm*15mm 28mm*22mm*22mm 28mm*22mm*28mm 15mm*15mm*22mm 22mm*22mm*28mm EKYH0301, CAP CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Models added September 2023: EKYH0001 STRAIGHT COUPLING WITH DOT CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. EKYH0202 REDUCING TEE: 35mm*22mm*22mm, 35mm*22mm*35mm, 35mm*28mm*35mm, 35mm*28mm*22mm, 35mm*28mm*35mm, 42mm*35mm*35mm. EKYH0005 COPPER FEMALE ADAPTOR: 15mm*3/4", 22mm*1/2", 22mm*1", 28mm*3/4", 35mm*1". EKYH0006 COPPER MALE ADAPTOR: 22mm*1/2", 28mm*3/4", 35mm*1". Models added in July 2024: EKYH0001 STRAIGHT COUPLING WITH DOT CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0002 SLIP COUPLING CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0012 EXTENDED SLIP COUPLING CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0003 REDUCING COUPLING CXC 66.7mmX22mm 66.7mmX28mm 66.7mmX35mm 66.7mmX42mm 66.7mmX54mm 76.1mmX28mm 76.1mmX35mm 76.1mmX42mm 76.1mmX54mm 76.1mmX66.7mm 88.9mmX42mm 88.9mmX54mm 88.9mmX66.7mm 88.9mmX76.1mm 108mmX28mm 108mmX35mm 108mmX42mm 108mmX54mm 108mmX66.7mm 108mmX76.1mm 108mmX88.9mm EKYH0004 FITTING REDUCER FXC 66.7mmX28mm 66.7mmX35mm 66.7mmX42mm 66.7mmX54mm 76.1mmX28mm 76.1mmX35mm 76.1mmX42mm 76.1mmX54mm 76.1mmX66.7mm 88.9mmX42mm 88.9mmX54mm 88.9mmX66.7mm 88.9mmX76.1mm 108mmX28mm 108mmX35mm 108mmX42mm 108mmX54mm 108mmX66.7mm 108mmX76.1mm 108mmX88.9mm EKYH0100 90DEG ELBOW CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0101 90DEG STREET ELBOW FTGXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0130 45DEG ELBOW CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0131 45DEG STREET ELBOW FTGXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0301 CAP CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0201 EQUAL TEE CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0202 REDUCING TEE 66.7mmX66.7mmX22mm 66.7mmX66.7mmX28mm 66.7mmX66.7mmX35mm 66.7mmX66.7mmX42mm 66.7mmX66.7mmX54mm 76.1mmX76.1mmX22mm 76.1mmX76.1mmX28mm 76.1mmX76.1mmX35mm 76.1mmX76.1mmX42mm 76.1mmX76.1mmX54mm 76.1mmX76.1mmX66.7mm 88.9mmX88.9mmX22mm 88.9mmX88.9mmX28mm 88.9mmX88.9mmX35mm 88.9mmX88.9mmX42mm 88.9mmX88.9mmX54mm 88.9mmX88.9mmX66.7mm 88.9mmX88.9mmX76.1mm 108mmX108mmX22mm 108mmX108mmX28mm 108mmX108mmX35mm 108mmX108mmX42mm 108mmX108mmX54mm 108mmX108mmX66.7mm 108mmX108mmX76.1mm 108mmX108mmX88.9mm EKYH0005 COPPER FEMALE ADAPTOR 66.7mmX2 1/2" BSPP 76.1mmX2 1/2" BSPP 76.1mmX3" BSPP 88.9mmX3" BSPP 108mmX4" BSPP EKYH0006 COPPER MALE ADAPTOR 66.7mmX2 1/2" BSPT 76.1mmX2 1/2" BSPT 76.1mmX3" BSPT 88.9mmX3" BSPT 108mmX4" BSPT EKYH0501 FLANGE 28mm, 35mm, 42mm, 54mm, 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0705 STRAIGHT CYLINDER UNION 15mm*G 1/2 15mm*G 3/4 22mm*G 3/4 22mm*G 1 28mm*G 1 EKYH0704 BENT CYLINDER UNION 15mm*G 1/2 15mm*G 3/4 22mm*G 3/4 22mm*G 1 28mm*G 1 EKYH0703 STRAIGHT TAP CONNECTOR 15mm*G 1/2 15mm*G 3/4 22mm*G ¾ EKYH0702 BENT TAP CONNECTOR 15mm*G 1/2 15mm*G 3/4 22mm*G ¾ EKYH0000 STRAIGHT COUPLING WITH GROOVE CXC 66.7mm, 76.1mm, 88.9mm, 108mm

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of press-fit end connectors (gunmetal bodies) for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112039

Size:

15mm – 54mm compression.

Marking:

Pegler Yorkshire, size and xpress on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

‘X press’ range comprising of models: 04305131. 04305132. 04305133. 04305141. 04305146. 04305151. 04305161.

Approval Holder:

Pegler Yorkshire Ltd

Company Name

Pegler Yorkshire Ltd

Address

St Catherines Avenue, Balby Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+44 (0) 844 243 4400

View All Listings by this Company

Range of brass tee fittings for use with copper pipe to EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112337

Size:

See model

Marking:

Aquamatic Products Limited logo (APL) on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

B840-1 - 15mm compression x 15mm spigot x 15mm spigot. B841-1 - 22mm compression x 22mm spigot x 22mm spigot.

Approval Holder:

Aquamatic Products Limited

Company Name

Aquamatic Products Limited

Address

Hydestile Stud Hambeldon Road Godalming Surrey

Postcode

GU8 4DE

Country

United Kingdom

Phone

01483 861559

General Email

steve@aquamatic.co.uk

View All Listings by this Company

‘HE-705X & HE-715X’ ranges of brass crimp fit fittings incorporating EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057-2006). HE-7052/7053/7058/7059 & HE-7152/7153/7158/7159 models also incorporate a NBR gasket. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2109058

Size:

See model

Marking:

HONGEN, WRAS and size on crimp connection.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

M-type connection: HE-7050 - straight connector - pressfit x BSP (M): 15-54mm x ½”-2”. HE-7051 - straight connector - pressfit x BSP (F): 15-54mm x ½”-2”. HE-7052 - straight connector (with central captive nut and washer) - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7053 - straight connector (with central captive nut and washer) - pressfit x pressfit: 15x15-28x28mm. HE-7054 - 90° elbow - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7055 - 90° elbow - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7056 - 90° wall plate elbow - pressfit x BSP (F): 15-22mm x ½”-¾”. HE-7057 - tee - pressfit x BSP (F) x pressfit: 15-54mm x ½” & 22-28 x ¾”. HE-7058 - straight connector (with central captive nut and washer) - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7059 - straight connector - pressfit x captive nut and washer: 15-28mm x ¾”-1¼”. V-type connection: HE-7150 - straight connector - pressfit x BSP (M): 15-54mm x ½”-2”. HE-7151 - straight connector - pressfit x BSP (F): 15-54mm x ½”-2”. HE-7152 - straight connector (with central captive nut and washer) - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7153 - straight connector (with central captive nut and washer) - pressfit x pressfit: 15x15-28x28mm. HE-7154 - 90° elbow - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7155 - 90° elbow - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7156 - 90° wall plate elbow - pressfit x BSP (F): 15-22mm x ½”-¾”. HE-7157 - tee - pressfit x BSP (F) x pressfit: 15-54mm x ½” & 22-28 x ¾”. HE-7158 - straight connector (with central captive nut and washer) - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7159 - straight connector - pressfit x captive nut and washer: 15-28mm x ¾”-1¼”.

Approval Holder:

YUHUAN HONGEN VALVE CO., LTD

Company Name

YUHUAN HONGEN VALVE CO., LTD

Address

Sanliancun, 317605, Yuhuan, Zhejiang, China

View All Listings by this Company

Manufacturer:

YUHUAN HONGEN VALVE CO., LTD

Company Name

YUHUAN HONGEN VALVE CO., LTD

Address

Sanliancun, 317605, Yuhuan, Zhejiang, China

View All Listings by this Company

VSH XPRESS Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106049

Size:

12mm - 108mm.

Marking:

DVGW, XPRESS & SIZE ON BODY

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

7001 22, 7002 22, 7001 15, 7002 15, 7040 22, 7130 15 & 7130 22 PRESS FITTINGS 6270 Copper Press Coupling: 12 - 108mm. 6271 Copper Press Coupling: 12 - 54mm. 6240 Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001 Bend 90° x press: 12-108mm. 6002 Bend 90° press x press: 12 - 108mm. 6130 Equal Tee 3 x press: 12 - 108mm. 6040 Bend 45° x press: 12 - 108mm. 6041 Bend 45° press x press: 12 - 108mm. 6301 Endcap press: 12 - 108mm. 6131 Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 Flange PN16: 76.1mm.

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of PVC-u solvent weld and threaded union fittings incorporating an EPDM ‘O’-ring. For use with PVC-u pipe manufactured to ISO 1452 and DIN 8063. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201016

Note:

This approval does not include solvent cement.

Size:

See model.

Marking:

ERA® (registered trademark of Yonggao Co. Ltd.), size and PN on nut.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Union UU001: 20mm-110mm Male Union UU002: 20mm-63mm x ¼”-2” BSP (F)

Approval Holder:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

‘Xpress’ range of press fit fittings with copper or brass bodies and EPDM ‘O’-rings. For use with copper tube manufactured to EN1057. For above ground ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201304

Size:

see model

Marking:

Brass fittings: Xpress and size on body. Copper fittings: Xpress, size and Kitemark logo on body.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Code Sl/7270 Sl/72705 SlR/7240 56/7243 S12/7002A S12S/7001A S2/6270G S3/6243G S7/6246G S8/6280G Description Straight coupling Straight coupling slip pattern Straight reducing coupling Reducer Elbow Street elbow Straight female connector Straight male connector Female adaptor Male Adaptor Sizes 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -64mm 15mm -108mm 15mm -54mm 15mm-42mm Copper/ Copper Copper Copper Copper Copper Copper Gunmetal Gunmetal Gunmetal Gunmetal S11/6330 S13/6092G S14/6090G Union coupling Male elbow Female elbow 15mm -54mm 15mm -54mm 15mm -54mm Gunmetal Gunmetal Gunmetal S15/6472G Backplate elbow 15mm - 22mm Gunmetal SlFMF/7510 Composite female metric flange 67mm -108mm Copper SlFMM/7520 Composite female metric flange 67mm -108mm Copper S12R/7002A S15L/6472L Reducing Elbow Elbow 22mm x 15mm ½” and 3/4" Copper Gunmetal 519/7005 Bend 15mm-28mm Copper 521/7041 Obtuse Elbow 12mm-108mm Copper 5215/7040 Obtuse Street Elbow 12mm-108mm Copper 522/7086 Partial Crossover 15, 18 and 22mm Copper 5225/7087 Crossover 15, 18 and 22mm Copper 523/7085 Full Crossover 15, 18 and 22mm Copper 524/7130 Equal Tee 12mm-108mm Copper 525/7130 Tee Reducer Branch 15mm-108mm Copper 526/7130 Tee One End Reducer 15mm-35mm Copper 526/7130 Tee One End And Branch Reducer 15mm-54mm Copper 528/7130 S30/130G 560/7301 Tee Both Ends Reducer Female Branch Tee Stop End 12mm-28mm 12mm-108mm 35mm-54mm Copper Gunmetal Copper 561/7301 Stop End 12mm-108mm Copper S65F/6096G Elbow 12mm-54mm Gunmetal S68FF/6359 S69/6331G S69F/6330G Union Straight Male Union Connector Straight Female Union Connector 15mm-54mm 12mm-54mm 12mm-54mm Gunmetal Gunmetal Gunmetal

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Pexal range of brass press fittings with EPDM ‘O’-rings for use with copper pipe EN1057. Model VS0171373 incorporates 90° copper elbow (chrome plated) Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2203337

Size:

16mm, 20mm, 26mm

Marking:

Valsir on fitting body

Installation Requirements:

R001

Expiry date:

31/03/2027

Model:

VS0171311 VS0171312 VS0171313 VS0171107UK VS0171119UK VS0171111UK VS0171117UK VS0171005 VS0171021 VS0171025 VS0171051 VS0171373 VS0171205 VS0171105 VS0171115

Approval Holder:

Valsir Spa

Company Name

Valsir Spa

Address

MERLARO 2 STREET VESTONE

Postcode

25078

Country

Italy

Phone

+39 365 877011

General Email

valsir@valsir.it

View All Listings by this Company

>B< Press range of stainless-steel SUS316L fittings for use with 316L stainless steel tube manufactured to EN10312. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201312

Size:

Please refer to model.

Marking:

Conex logo (B) and size on body

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

PS4001G – Male Bend PS4001G0150400 – 15 x ½” PS4001G0180400 – 18 x ½” PS4001G0180600 – 18 x ¾” PS4001G0220600 – 22 x ¾” PS4001G0280800 – 28 x 1” PS4001G0351000 – 35 x 1-1/4” PS4001G0421200 – 42 x 1-1/2” PS4001G0541600 – 54 x 2” PS4002G – Female Bend PS4002G0150400 – 15 x ½” PS4002G0180400 – 18 x ½” PS4002G0180600 – 18 X ¾” PS4002G0220600 – 22 x ¾” PS4002G0280800 – 28 x 1” PS4002G0351000 – 35 x 1-1/4” PS4002G0421200 – 42 x 1-1/2” PS4002G0541600 – 54 x 2” PS4090G – Female Street Elbow PS4090G0150400 – 15 x ½” PS4090G0180400 – 18 x ½” PS4090G0220400 – 22 x ½” PS4090G0220600 – 22 x ¾” PS4090G0280800 – 28 x 1” PS4090G0351000 – 35 x 1-1/4” PS4092G – Male Elbow 90° PS4092G0150400 – 15 x ½” PS4092G0180400 – 18 x ½” PS4130G – Female Tee PS4130G0150415 – 15 x 15 x ½” PS4130G0180418 – 18 x 18 x ½” PS4130G0180618 – 18 x 18 x ¾” PS4130G0220422 – 22 x 22 x ½” PS4130G0220622 – 22 x 22 x ¾” PS4130G0280428 – 28 x 28 x ½” PS4130G0280628 – 28 x 28 x ¾” PS4130G0280828 – 28 x 28 x 1” PS4130G0350435 – 35 x 35 x ½” PS4130G0350635 – 35 x 35 x ¾” PS4130G0351035 – 35 x 35 x 1-1/4” PS4130G0420442 – 42 x 42 x ½” PS4130G0420642 – 42 x 42 x ¾” PS4130G0540454 – 54 x 54 x ½” PS4130G0540654 – 54 x 54 x ¾” PS4130G0541654 – 54 x 54 x 2” PS4130G0760676 – 76 x 76 x ¾” PS4130G0761676 – 76 x 76 x 2” PS4130G0890689 – 89 x 89 x ¾” PS4130G0891689 – 89 x 89 x 2” PS4130G10806108 – 108 x 108 x ¾” PS4130G10816108 – 108 x 108 x 2” PS4243G – Male Straight Connector PS4243G0150400 – 15 x ½” PS4243G0180400 – 18 x ½” PS4243G0180600 – 18 x ¾” PS4243G0220400 – 22 x ½” PS4243G0220600 – 22 x ¾” PS4243G0220800 – 22 x 1” PS4243G0280600 – 28 x ¾” PS4243G0280800 – 28 x 1” PS4243G0351000 – 35 x 1-1/4” PS4243G0421200 – 42 x 1-1/2” PS4243G0541600 – 54 x 2” PS4243G0762000 – 76 x 2-1/2” PS4243G0892400 – 89 x 3” PS4243G1083200 – 108 – 4” PS4270G – Female Straight Connector PS4270G0150400 – 15 x ½” PS4270G0180400 – 18 x ½” PS4270G0180600 – 18 x ¾” PS4270G0220400 – 22 x ½” PS4270G0220600 – 22 x ¾” PS4270G0220800 – 22 x 1” PS4270G0280600 – 28 x ¾” PS4270G0280800 – 28 x 1” PS4270G0351000 – 35 x 1-1/4” PS4270G0421200 – 42 x 1-1/2” PS4270G0541600 – 54 x 2” PS4270G0762000 – 76 x 2-1/2” PS4270G0892400 – 89 x 3” PS4275 – Slip Coupler PS4275 0150000 – 15MM PS4275 0180000 – 18MM PS4275 0220000 – 22MM PS4275 0280000 – 28MM PS4275 0350000 – 35MM PS4275 0420000 – 42MM PS4275 0540000 – 54MM PS4275 0760000 – 76MM PS4275 0890000 – 89MM PS4275 1080000 – 108MM PS4330G – Female Straight Adaptor PS4330G0150400 – 15 x ½” PS4330G0150600 – 15 x ¾” PS4330G0180400 – 18 x ½” PS4330G0180600 – 18 x ¾” PS4330G0220600 – 22 x ¾” PS4330G0220800 – 22 x 1” PS4330G0280800 – 28 x 1” PS4330G0351000 – 35 x 1-1/4” PS4330G0421200 – 42 x 1-1/2” PS4330G0541600 – 54 x 2” PS4331G – Male Straight Adaptor PS4331G0150400 – 15 x ½” PS4331G0180400 – 18 x ½” PS4331G0220600 – 22 x ¾” PS4331G0280800 – 28 x 1! PS4331G0351000 – 35 x 1-1/4” PS4331G0421200 – 42 x 1-1/2” PS4331G0541600 – 54 x 2” PS4355 – Flat Face Union PS4355 0150600 – 15 x ¾” PS4355 0180600 – 18 x ¾” PS4355 0220600 – 22 x ¾” PS4355 0220800 – 22 x 1” PS4355 0280800 – 28 x 1” PS4355 0281000 – 28 x 1-1/4” PS4355 0351200 – 35 x 1-1/2” PS4471G – Wallplate Elbow PS4471G0150400 – 15 x ½” PS4471G0180400 – 18 x ½” PS4471G0220600 – 22 x ¾” PS4471G0280800 – 28 x 1” PS5001 – Street Bend PS5001 0150000 – 15MM PS5001 0180000 – 18MM PS5001 0220000 – 22MM PS5001 0280000 – 28MM PS5001 0350000 – 35MM PS5001 0420000 – 42MM PS5001 0540000 – 54MM PS5001 0760000 – 76MM PS5001 0890000 – 89MM PS5002 – Bend PS5002 0150000 – 15MM PS5002 0180000 – 18MM PS5002 0220000 – 22MM PS5002 0280000 – 28MM PS5002 0350000 – 35MM PS5002 0420000 – 42MM PS5002 0540000 – 54MM PS5002 0760000 – 76MM PS5002 0890000 – 89MM PS5002 1080000 – 108MM PS5030 – 90 Street Bend PS5030 0150000 – 15MM PS5030 0180000 – 18MM PS5030 0220000 – 22MM PS5030 0280000 – 28MM PS5030 0350000 – 35MM PS5030 0420000 – 42MM PS5030 0540000 – 54MM PS5040 – 45 Street Bend PS5040 0150000 – 15MM PS5040 0180000 – 18MM PS5040 0220000 – 22MM PS5040 0280000 – 28MM PS5040 0350000 – 35MM PS5040 0420000 – 42MM PS5040 0540000 – 54MM PS5040 0760000 – 76MM PS5040 0890000 – 89MM PS5040 1080000 – 108MM PS5041 – Obtuse Bend PS5041 0150000 – 15MM PS5041 0180000 – 18MM PS5041 0220000 – 22MM PS5041 0280000 – 28MM PS5041 0350000 – 35MM PS5041 0420000 – 42MM PS5041 0540000 – 54MM PS5041 0760000 – 76MM PS5041 0890000 – 89MM PS5041 1080000 – 108MM PS5087 – Cross Short PS5087 0150000 – 15MM PS5087 0180000 – 18MM PS5087 0220000 – 22MM PS5087 0280000 – 28MM PS5130 – Equal Tee PS5130 0151515 – 15MM PS5130 0181818 – 18MM PS5130 0222222 – 22MM PS5130 0282828 – 28MM PS5130 0353535 – 35MM PS5130 0424242 – 42MM PS5130 0545454 – 54MM PS5130 0767676 – 76MM PS5130 0898989 – 89MM PS5130 10800EQ – 108MM PS5130 – Reduced Branch Tee PS5130 0181518 – 18 x 15 x 18 PS5130 0221522 – 22 x 15 x 22 PS5130 0221822 – 22 x 18 x 22 PS5130 0281528 – 28 x 15 x 28 PS5130 0281828 – 28 x 18 x 28 PS5130 0282228 – 28 x 22 x 28 PS5130 0351535 – 35 x 15 x 35 PS5130 0351835 – 35 x 18 x 35 PS5130 0352235 – 35 x 22 x 35 PS5130 0352835 – 35 x 28 x 35 PS5130 0422242 – 42 x 22 x 42 PS5130 0422842 – 42 x 28 x 42 PS5130 0423542 – 42 x 35 x 42 PS5130 0542254 – 54 x 22 x 54 PS5130 0542854 – 54 x 28 x 54 PS5130 0543554 – 54 x 35 x 54 PS5130 0544254 – 54 x 42 x 54 PS5130 0762276 – 76 x 22 x 76 PS5130 0762876 – 76 x 28 x 76 PS5130 0763576 – 76 x 35 x 76 PS5130 0764276 – 76 x 42 x 76 PS5130 0765476 – 76 x 54 x 76 PS5130 0892289 – 89 x 22 x 89 PS5130 0892889 – 89 x 28 x 89 PS5130 0893589 – 89 x 35 x 89 PS5130 0894289 – 89 x 42 x 89 PS5130 0895489 – 89 x 54 x 89 PS5130 0897689 – 89 x 76 x 89 PS5130 10822108 – 108 x 22 x 108 PS5130 10828108 – 108 x 28 x 108 PS5130 10835108 – 108 x 35 x 108 PS5130 10842108 – 108 x 42 x 108 PS5130 10854108 – 108 x 54 x 108 PS5130 10876108 – 108 x 76 x 108 PS5130 10889108 – 108 x 89 x 108 PS5230D – Flange Adapter PS5230D0760000 – 76MM PS5230D0890000 – 89MM PS5230D1080000 – 108MM PS5243 – Fitting Reducer PS5243 0181500 – 18 x 15 PS5243 0221500 – 22 x 15 PS5243 0221800 – 22 x 18 PS5243 0281500 – 28 x 15 PS5243 0281800 – 28 x 18 PS5243 0282200 – 28 x 22 PS5243 0351800 – 35 x 18 PS5243 0352200 – 35 x 22 PS5243 0352800 – 35 x 28 PS5243 0422800 – 42 x 28 PS5243 0423500 – 42 x 35 PS5243 0542800 – 54 x 28 PS5243 0543500 – 54 x 35 PS5243 0544200 – 54 x 42 PS5243 0764200 – 76 x 42 PS5243 0765400 – 76 x 54 PS5243 0894200 – 89 x 42 PS5243 0895400 – 89 x 54 PS5243 0897600 – 89 x 76 PS5243 1085400 – 108 x 54 PS5243 1087600 – 108 x 76 PS5243 1088900 – 108 x 89 PS5270 – Coupler PS5270 0150000 – 15MM PS5270 0180000 – 18MM PS5270 0220000 – 22MM PS5270 0280000 – 28MM PS5270 0350000 – 35MM PS5270 0420000 – 42MM PS5270 0540000 – 54MM PS5270 0760000 – 76MM PS5270 0890000 – 89MM PS5270 1080000 – 108MM PS5301 – Stop End PS5301 0150000 – 15MM PS5301 0180000 – 18MM PS5301 0220000 – 22MM PS5301 0280000 – 28MM PS5301 0350000 – 35MM PS5301 0420000 – 42MM PS5301 0540000 – 54MM PS5301 0760000 – 76MM PS5301 0890000 – 89MM PS5301 1080000 – 108MM

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

ZK International Group

Company Name

ZK International Group

Address

NO.678 Dingxiang Road, Binhai Garden,Economic and Technological Development Zone, Wenzhou, Zhejiang

Country

China

General Email

View All Listings by this Company

‘AF’ range of compression fittings with brass or chrome plated brass bodies for use with copper pipe (manufactured to EN1057). The AF14 and AF15 tap connector models incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum working temperature 85˚C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2204071

Size:

see model

Marking:

“DOZ” and Size on fitting body

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

AF01 couplings-cxc: 6 - 54mm compression. AF01B repair couplings-cxc: 6 - 54mm compression. AF01R reducing couplings cxc: 10 x 8mm compression, 12 x 8mm compression, 15 x 8mm compression, 12 x 10mm compression, 15 x 10mm compression, 15 x 12mm compression, 18 x 12mm compression, 16 x 15mm compression, 22 x 15mm compression, 28 x 15mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression. AF02P female adaptors-parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ⅜" BSP (F), 10mm compression, x ½" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x ¾” BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). AF03T male adaptors-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF03P male adaptors-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF03P extended male adaptors-CxMI: 10mm compression, x ⅜" BSP (M), 12mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M). AF04 tank connectors-lug style: 10 - 54mm compression. AF04N tank connectors-nut style: 10 - 54mm compression. AF05 elbows 90 degree-CxC: 6 - 54mm compression. 8 x 6mm compression, 10 x 8mm compression, 12 x 10mm compression, 15 x 12mm compression, 18 x 15mm compression, 22 x 15mm compression, 22 x 18mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression, AF06T male elbows-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1¼" BSP (M), 42mm compression, x 1½" BSP (M), 54mm compression, x 2" BSP (M). AF06P male elbows-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 28mm compression, x 1-¼" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF07 female elbows-CxFI parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 8mm compression, x ⅜" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ½" BSP (F), 10mm compression, x ⅜" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x ¾" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x 1-¼" BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). AF08 wallplate elbows-CxFI: 12mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x ½" BSP (F), 28mm compression, x 1" BSP (F). AF08 equal tees-CxCxC: 6 - 54mm compression. AF08R reducing tees-CxCxC: 15 x 15 x 10mm compression, 15 x 15 x 22mm compression, 22 x 15 x 15mm compression, 22 x 15 x 22mm compression, 22 x 22 x 15mm compression, 22 x 22 x 28mm compression, 28 x 15 x 28mm compression, 28 x 22 x 28mm compression, 28 x 22 x 22mm compression, 28 x 28 x 15mm compression, 28 x 28 x 22mm compression, 35 x 35 x 15mm compression, 35 x 35 x 22mm compression, AF09 threaded centre teesCxCxFI: 15mm compression, x 15mm compression, x ¼" BSP (F), 15mm compression, x 15mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x 1" BSP (F). AF10 threaded end tees CxFIxC: 15mm compression, x ½" BSP (F) x 15mm compression, 22mm compression, x ¾" BSP (F) x 22mm compression, AF12 stopends-C: 6 - 54mm compression. AF14 straight tap connectors: 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F). AF15 bent tap connectors: 15mm compression, x ½" BSP (F).

Approval Holder:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company

Manufacturer:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company

Range of tee fittings incorporating DZR brass bodies (chrome plated) and approved single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) for use with copper pipe to EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2204800

Size:

See model

Marking:

APL (Aquamatic Products Limited) & CR on body.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

B840-1 CV – 15mm compression x 15mm spigot B841-1 CV – 22mm compression x 22mm spigot

Approval Holder:

Aquamatic Products Limited

Company Name

Aquamatic Products Limited

Address

Hydestile Stud Hambeldon Road Godalming Surrey

Postcode

GU8 4DE

Country

United Kingdom

Phone

01483 861559

General Email

steve@aquamatic.co.uk

View All Listings by this Company

‘Tectite Sprint’ range of pushfit fittings with copper or DZR brass bodies. 10mm, 15mm, 22mm & 28mm pushfit fittings are for use with copper pipe (manufactured to BS EN 1057) and polybutylene barrier pipe and cross linked PEX barrier pipe (manufactured to BS 7291). 35mm, 42mm & 54mm pushfit fittings are for use with copper pipe (manufactured to BS EN 1057) only. When used with PB & PEX pipes operating parameter are: 12.0 bar@cold water. 3.0 bar@92°C. When used with copper pipes operating parameter are: 20.0 bar@cold water. 10.0 bar@100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201049

Size:

See model

Marking:

YF logo (abbreviation of Yorkshire Fittings, a brand of Aalberts Integrated Piping Systems Ltd) and size on body

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

‘Tectite Sprint’ range: Copper Models: 75500 TT1/TT270 10mm Coupling, 75660 TT1/TT270 12mm Coupling, 75661 TT1/TT270 14mm Coupling, 75501 TT1/TT270 15mm Coupling, 75662 TT1/TT270 16mm Coupling, 75663 TT1/TT270 18mm Coupling, 75502 TT1/TT270 22mm Coupling, 75503 TT1/TT270 28mm Coupling, 75900 TT1/TT270 35mm Coupling, 75901 TT1/TT270 42mm Coupling, 75902 TT1/TT270 54mm Coupling, 75530 TT12/TT090 10mm Elbow, 75689 TT12/TT090 12mm Elbow, 75690 TT12/TT090 14mm Elbow, 75531 TT12/TT090 15mm Elbow, 75691 TT12/TT090 16mm Elbow, 75692 TT12/TT090 18mm Elbow, 75532 TT12/TT090 22mm Elbow, 75533 TT12/TT090 28mm Elbow, 75921 TT12/TT090 35mm Elbow, 75922 TT12/TT090 42mm Elbow, 75923 TT12/TT090 54mm Elbow, 75852 TT12CP/TT090 12mm Elbow, 75853 TT12CP/TT090 15mm Elbow, 75854 TT12CP/TT090 22mm Elbow, 75535 TT12S/TT092 10mm Street Elbow, 75536 TT12S/TT092 10mm x 15mm Strt Red Elbow, 75693 TT12S/TT092 12mm Street Elbow, 75537 TT12S/TT092 15mm Street Elbow, 75695 TT12S/TT092 16mm Street Elbow, 75696 TT12S/TT092 18mm Street Elbow, 75538 TT12S/TT092 22mm Street Elbow, 75924 TT12S/TT092 35mm Street Elbow, 75925 TT12S/TT092 42mm Street Elbow, 75926 TT12S/TT092 54mm Street Elbow, 75838 TT1CP/TT270 15mm Coupling, 75839 TT1CP/TT270 22mm Coupling, 75551 TT21/TT041 15mm Obtuse Elbow, 75703 TT21/TT041 16mm Obtuse Elbow, 75704 TT21/TT041 18mm Obtuse Elbow, 75552 TT21/TT041 22mm Obtuse Elbow, 75553 TT21/TT041 28mm Obtuse Elbow, 75927 TT21/TT041 35mm Obtuse Elbow, 75928 TT21/TT041 42mm Obtuse Elbow, 75929 TT21/TT041 54mm Obtuse Elbow, 75705 TT21S/TT040 12mm Obtuse Street El, 75585 TT21S/TT040 15mm Obtuse Street El, 75708 TT21S/TT040 18mm Obtuse Street El, 75586 TT21S/TT040 22mm Obtuse Street El, 75587 TT21S/TT040 28mm Obtuse Street El, 75930 TT21S/TT040 35mm Obtuse Street Elbow, 75931 TT21S/TT040 42mm Obtuse Street Elbow, 75932 TT21S/TT040 54mm Obtuse Street Elbow, 75555 TT24/TT130 10mm Equal Tee, 75709 TT24/TT130 12mm Equal Tee, 75710 TT24/TT130 14mm Equal Tee, 75556 TT24/TT130 15mm Equal Tee, 75712 TT24/TT130 18mm Equal Tee, 75557 TT24/TT130 22mm Equal Tee, 75558 TT24/TT130 28mm Equal Tee, 75933 TT24/TT130 35mm Equal Tee, 75934 TT24/TT130 42mm Equal Tee, 75935 TT24/TT130 54mm Equal Tee, 75861 TT24CP/TT130 15mm Equal Tee, 75862 TT24CP/TT130 22mm Equal Tee, 75565 TT25/TT130 15mm x 15mm x 10mm/TT130 15mm x 10mm x 15mm Tee, 75714 TT25/TT130 15mm x 15mm x 12mm/TT130 15mm x 12mm x 15mm Tee, 75719 TT25/TT130 18mm x 18mm x 15mm/TT130 18mm x 15mm x 18mm Tee, 75566 TT25/TT130 22 mm x 22mm x 10mm/TT130 22mm x 10mm x 22mm Tee, 75567 TT25/TT130 22 mm x 22mm x 15mm/TT130 22mm x 15mm x 22mm Tee, 75722 TT25/TT130 22 mm x 22mm x 18mm/TT130 22mm x 18mm x 22mm Tee, 75568 TT25/TT130 28 mm x 28mm x 15mm /TT130 28mm x 15mm x 28mm Tee, 75569 TT25/TT130 28 mm x 28mm x 22mm /TT130 28mm x 22mm x 28mm Tee, 75937 TT25/TT130 35 mm x 35mm x 22mm Tee, 75940 TT25/TT130 42 mm x 42mm x 22mm Tee, 75944 TT25/TT130 54 mm x 54mm x 22mm Tee, 75865 TT25CP 22mm x 22mm x 15mm /TT130 22mm x 15mm x 22mm Tee, 75724 TT26 15mm x 12mm x 15mm/TT130 15mm x 15mm x 12mm Tee, 75573 TT26 22mm x 15mm x 22mm/TT130 22mm x 22mm x 15mm Tee, 75574 TT26 28mm x 15mm x 28mm/TT130 28mm x 28mm x 15mm Tee, 75575 TT26 28mm x 22mm x 28mm/TT130 28mm x 28mm x 22mm Tee, 75869 TT26CP 22mm x 15mm x 22mm/TT130 22mm x 22mm x 15mm Tee, 75582 TT27/TT130 22mm x 15mm x 15mm Tee RedEndBch, 75584 TT27/TT130 28mm x 22mm x 22mm Tee RedEndBch, 75870 TT27CP/TT130 22mm x 15mm x 15mm RedEndBch, 75520 TT5 15mm x 1/2” BSP (M) Tank Coupling, 75521 TT5 22mm x 3/4” BSP (M) Tank Coupling, 75523 TT6/TT243 15mm x 10mm Reducer, 75524 TT6/TT243 15mm x 12mm Reducer, 75525 TT6/TT243 22mm x 15mm Reducer, 75526 TT6/TT243 28mm x 15mm Reducer, 75527 TT6/TT243 28mm x 22mm Reducer, 75909 TT6/TT243 35mm x 15mm Reducer, 75910 TT6/TT243 35mm x 22mm Reducer, 75911 TT6/TT243 35mm x 28mm Reducer, 75913 TT6/TT243 42mm x 22mm Reducer, 75914 TT6/TT243 42mm x 28mm Reducer, 75915 TT6/TT243 42mm x 35mm Reducer, 75917 TT6/TT243 54mm x 22mm Reducer, 75918 TT6/TT243 54mm x 28mm Reducer, 75919 TT6/TT243 54mm x 35mm Reducer, 75920 TT6/TT243 54mm x 42mm Reducer, 75590 TT61/TT301 10mm Stop End, 75731 TT61/TT301 12mm Stop End, 75732 TT61/TT301 14mm Stop End, 75591 TT61/TT301 15mm Stop End, 75733 TT61/TT301 16mm Stop End, 75734 TT61/TT301 18mm Stop End, 75592 TT61/TT301 22mm Stop End, 75593 TT61/TT301 28mm Stop End, 75868 TT61CP/TT301 15mm Stop End, 75600 TT62/TT062 10mm x 1/2” BSP (M) Str Tap Conn, 75736 TT62/TT062 12mm x 3/8” BSP (M) Str Tap Conn, 75601 TT62/TT062 15mm x 1/2” BSP (M) Str Tap Conn, 75740 TT62/TT062 16mm x 3/4” BSP (M) Str Tap Conn, 75603 TT62/TT062 22mm x 3/4” BSP (M) Str Tap Conn, 75604 TT63/TT063 10mm x 1/2” BSP (M) Bent Tap Conn, 75605 TT63/TT063 15mm x ½” BSP (M) Bent Tap Conn, 75850 TT6CP/TT243 22mm x 15mm Reducer. Brass Models: 75540 TT13/TT092G 15mm x 1/2” BSP (M) Male Elbow, 75833 TT13/TT092G 22mm x 3/4” BSP (M) Male Elbow, 75697 TT14/TT090G 14mm x ½” BSP (F) Female Elbow, 75545 TT14/TT090G 15mm x 1/2” BSP (F) Female Elbow, 75698 TT14/TT090G 16m m x 1/2” BSP (F) Female Elbow, 75831 TT14/TT090G 22mm x 3/4” BSP (F) Female Elbow, 75548 TT15/TT471G 12mm x 1/2” BSP (F) Backplate ELB, 75550 TT15/TT471G 15mm x 1/2” BSP (F) Backplate ELB, 75664 TT1R/TT240 14mm x 12mm Red Coupling, 75504 TT1R/TT240 15mm x 10mm Red Coupling, 75665 TT1R/TT240 15mm x 12mm Red Coupling, 75667 TT1R/TT240 16mm x 14mm Red Coupling, 75668 TT1R/TT240 18mm x 15mm Red Coupling, 75505 TT1R/TT240 22mm x 15mm Red Coupling, 75671 TT1R/TT240 22mm x 18mm Red Coupling, 75840 TT1RCP/TT240 15mm x 10mm Red Coupling, 75673 TT2/TT270G 12mm x 1/2” BSP (F) Female Cplng, 75675 TT2/TT270G 14mm x 1/2” BSP (F) Female Cplng, 75674 TT2/TT270G 14mm x 3/8” BSP (F) Female Cplng, 75510 TT2/TT270G 15mm x 1/2” BSP (F) Female Cplng, 75676 TT2/TT270G 16mm x 1/2” BSP (F) Female Cplng, 75677 TT2/TT270G 18mm x 1/2” BSP (F) Female Cplng, 75835 TT2/TT270G 18mm x 3/4” BSP (F) Strt Female Con, 75511 TT2/TT270G 22mm x 3/4” BSP (F) Female Cplng, 75678 TT2/TT270G 28mm x 1” BSP (F) Female Cplng, 75903 TT2/TT270G 35mm x 1.1/4” BSP (F) Str Fem Con, 75904 TT2/TT270G 42mm x 1.1/2” BSP (F) Str Fem Con, 75905 TT2/TT270G 54mm x 2” BSP (F) Str Fem Con, 75843 TT2CP/TT270G 15mm x 1/2” BSP (F) Female Coup, 75680 TT3/TT243G 10mm x 1/2” BSP (M) Male Coupling, 75679 TT3/TT243G 10mm x 3/8” BSP (M) Male Coupling.

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company