“D-“ and “E-“ range of 304 and 316L stainless steel press fittings, in either ‘M’ press profile (D- prefix models) or ‘V’ press profile (E- prefix models) for use with stainless steel pipe (316L & 304 manufactured to EN10312). For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature: 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250912029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Company logo “WEGS”, size, material SUS304 or SUS316L on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

D-DN10 - 90° Equal Elbow: 15mm, D-DN15 - 90° Equal Elbow: 18mm, D-DN20 - 90° Equal Elbow: 22mm, D-DN25 - 90° Equal Elbow: 28mm, D-DN32 - 90° Equal Elbow: 35mm, D-DN40 - 90° Equal Elbow: 42mm, D-DN50 - 90° Equal Elbow: 54mm, D-DN10 - 90° B-type equal elbow: 15mm, D-DN15 - 91° B-type equal elbow: 18mm, D-DN20 - 92° B-type equal elbow: 22mm, D-DN25 - 93° B-type equal elbow: 28mm, D-DN32 - 94° B-type equal elbow: 35mm, D-DN40 - 95° B-type equal elbow: 42mm, D-DN50 - 96° B-type equal elbow: 54mm, D-DN15×10 - 90° Reducing Elbow: 15×18mm, D-DN20×15 - 91° Reducing Elbow: 22×18mm, D-DN25×15 - 92° Reducing Elbow: 28×18mm, D-DN25×20 - 93° Reducing Elbow: 28×22mm, D-DN10×½ - 90° Male Elbow: 15mm×½, D-DN10×¾ - 90° Male Elbow: 15mm×¾, D-DN15×½ - 90° Male Elbow: 18mm×½, D-DN15×¾ - 90° Male Elbow: 18mm×¾, D-DN20×¾ - 90° Male Elbow: 22mm×¾, D-DN25×1 - 90° Male Elbow: 28 mm×1, D-DN32×1¼ - 90° Male Elbow: 35mm×1¼, D-DN40×1½ - 90° Male Elbow: 42mm×1½, D-DN50×2 - 90° Male Elbow: 54mm×2, D-DN10×½ - 90° female elbow: 15mm×½, D-DN10×¾ - 90° female elbow: 15mm×¾, D-DN15×½ - 90° female elbow: 18mm×½, D-DN15×¾ - 90° female elbow: 18mm×¾, D-DN20×¾ - 90° female elbow: 22mm×¾, D-DN25×1 - 90° female elbow: 28 mm×1, D-DN32×1¼ - 90° female elbow: 35mm×1¼, D-DN40×1½ - 90° female elbow: 42mm×1½, D-DN50×2 - 90° female elbow: 54 mm×2, D-DN10 - 45° Equal Elbow: 15mm, D-DN15 - 45° Equal Elbow: 18mm, D-DN20 - 45° Equal Elbow: 22mm, D-DN25 - 45° Equal Elbow: 28mm, D-DN32 - 45° Equal Elbow: 35mm, D-DN40 - 45° Equal Elbow: 42mm, D-DN50 - 45° Equal Elbow: 54mm, D-DN10 - 45° B-type equal elbow: 15mm, D-DN15 - 45° B-type equal elbow: 18mm, D-DN20 - 45° B-type equal elbow: 22mm, D-DN25 - 45° B-type equal elbow: 28mm, D-DN32 - 45° B-type equal elbow: 35mm, D-DN40 - 45° B-type equal elbow: 42mm, D-DN50 - 45° B-type equal elbow: 54mm, D-DN10 - Equal tee: 15mm, D-DN15 - Equal tee: 18mm, D-DN20 - Equal tee: 22mm, D-DN25 - Equal tee: 28mm, D-DN32 - Equal tee: 35mm, D-DN40 - Equal tee: 42mm, D-DN50 - Equal tee: 54mm, D-DN15×10 - Reducing Tee: 18×15mm, D-DN20×10 - Reducing Tee: 22×15mm, D-DN20×15 - Reducing Tee: 22×18mm, D-DN25×10 - Reducing Tee: 28×15mm, D-DN25×15 - Reducing Tee: 28×18mm, D-DN25×20 - Reducing Tee: 28×22mm, D-DN32×10 - Reducing Tee: 35×15mm, D-DN32×15 - Reducing Tee: 35×18mm, D-DN32×20 - Reducing Tee: 35×22mm, D-DN32×25 - Reducing Tee: 35×28mm, D-DN40×15 - Reducing Tee: 42×18mm, D-DN40×20 - Reducing Tee: 42×22mm, D-DN40×25 - Reducing Tee: 42×28mm, D-DN40×32 - Reducing Tee: 42×35mm, D-DN50×20 - Reducing Tee: 54×22mm, D-DN50×25 - Reducing Tee: 54×28mm, D-DN50×32 - Reducing Tee: 54×35mm, D-DN50×40 - Reducing Tee: 54×42mm, D-DN10×½ - Short elbow with female: 15mm×½, D-DN10×¾ - Short elbow with female: 15mm×¾, D-DN15×½ - Short elbow with female: 18mm×½, D-DN15×¾ - Short elbow with female: 18mm×¾, D-DN20×¾ - Short elbow with female: 22mm×¾, D-DN25×½ - Short elbow with female: 28mm×½, D-DN25×¾ - Short elbow with female: 28mm×¾, D-DN25×1 - Short elbow with female: 28mm×1, D-DN10×½ - Female Tee: 15mm×½, D-DN10×¾ - Female Tee: 15mm×¾, D-DN15×½ - Female Tee: 18mm×½, D-DN15×¾ - Female Tee: 18mm×¾, D-DN20×½ - Female Tee: 22mm×½, D-DN20×¾ - Female Tee: 22mm×¾, D-DN25×½ - Female Tee: 28mm×½, D-DN25×¾ - Female Tee: 28mm×¾, D-DN25×1 - Female Tee: 28 mm×1, D-DN32×½ - Female Tee: 35mm×½, D-DN32×¾ - Female Tee: 35mm×¾, D-DN32×1¼ - Female Tee: 35mm×1¼, D-DN40×½ - Female Tee: 42mm×½, D-DN40×¾ - Female Tee: 42mm×¾, D-DN40×1¼ - Female Tee: 42mm×1¼, D-DN40×1½ - Female Tee: 42mm×1½, D-DN50×½ - Female Tee: 54mm×½, D-DN50×¾ - Female Tee: 54mm×¾, D-DN50×2 - Female Tee: 54mm×2, D-DN10×½ - Male Tee: 15mm×½, D-DN10×¾ - Male Tee: 15mm×¾, D-DN15×½ - Male Tee: 18mm×½, D-DN15×¾ - Male Tee: 18mm×¾, D-DN20×½ - Male Tee: 22mm×½, D-DN20×¾ - Male Tee: 22mm×¾, D-DN25×½ - Male Tee: 28mm×½, D-DN25×¾ - Male Tee: 28mm×¾, D-DN25×1 - Male Tee: 28 mm×1, D-DN32×½ - Male Tee: 35mm×½, D-DN32×¾ - Male Tee: 35mm×¾, D-DN32×1¼ - Male Tee: 35mm×1¼, D-DN40×½ - Male Tee: 42mm×½, D-DN40×¾ - Male Tee: 42mm×¾, D-DN40×1¼ - Male Tee: 42mm×1¼, D-DN40×1½ - Male Tee: 42mm×1½, D-DN50×½ - Male Tee: 54mm×½, D-DN50×¾ - Male Tee: 54mm×¾, D-DN50×2 - Male Tee: 54 mm×2, D-DN10×½ - Male Adapter: 15mm×½, D-DN10×¾ - Male Adapter: 15mm×¾, D-DN15×½ - Male Adapter: 18mm×½, D-DN15×¾ - Male Adapter: 18mm×¾, D-DN20×½ - Male Adapter: 22mm×½, D-DN20×¾ - Male Adapter: 22mm×¾, D-DN20×1 - Male Adapter: 22mm×1, D-DN25×¾ - Male Adapter: 28mm×¾, D-DN25×1 - Male Adapter: 28mm×1, D-DN32×1 - Male Adapter: 35 mm×1, D-DN32×1¼ - Male Adapter: 35mm×1¼, D-DN40×1½ - Male Adapter: 42mm×1½, D-DN50×2 - Male Adapter: 54 m×2, D-DN10 - Equal coupling: 15mm, D-DN15 - Equal coupling: 18mm, D-DN20 - Equal coupling: 22mm, D-DN25 - Equal coupling: 28mm, D-DN32 - Equal coupling: 35mm, D-DN40 - Equal coupling: 42mm, D-DN50 - Equal coupling: 54mm, D-DN15×10 - Reducing coupling: 18×15mm, D-DN20×10 - Reducing coupling: 22×15mm, D-DN20×15 - Reducing coupling: 22×18mm, D-DN25×10 - Reducing coupling: 28×15mm, D-DN25×15 - Reducing coupling: 28×18mm, D-DN25×20 - Reducing coupling: 28×22mm, D-DN32×15 - Reducing coupling: 35×18mm, D-DN32×20 - Reducing coupling: 35×22mm, D-DN32×25 - Reducing coupling: 35×28mm, D-DN40×15 - Reducing coupling: 42×18mm, D-DN40×20 - Reducing coupling: 42×22mm, D-DN40×25 - Reducing coupling: 42×28mm, D-DN40×32 - Reducing coupling: 42×35mm, D-DN50×15 - Reducing coupling: 54×18mm, D-DN50×20 - Reducing coupling: 54×22mm, D-DN50×25 - Reducing coupling: 54×28mm, D-DN50×32 - Reducing coupling: 54×35mm, D-DN50×40 - Reducing coupling: 54×42mm, D-DN10×½ - Female Adapter: 15mm×½, D-DN10×¾ - Female Adapter: 15mm×¾, D-DN15×½ - Female Adapter: 18mm×½, D-DN15×¾ - Female Adapter: 18mm×¾, D-DN20×½ - Female Adapter: 22mm×½, D-DN20×¾ - Female Adapter: 22mm×¾, D-DN25×½ - Female Adapter: 28mm×½, D-DN25×¾ - Female Adapter: 28mm×¾, D-DN25×1 - Female Adapter: 28mm×1, D-DN32×1¼ - Female Adapter: 35mm×1¼, D-DN40×1½ - Female Adapter: 42mm×1½, D-DN50×2 - Female Adapter: 54mm×2, D-DN10×½ - Moving Female Adapter: 15mm×½, D-DN10×¾ - Moving Female Adapter: 15mm×¾, D-DN15×½ - Moving Female Adapter: 18mm×½, D-DN15×¾ - Moving Female Adapter: 18mm×¾, D-DN20×½ - Moving Female Adapter: 22mm×½, D-DN20×¾ - Moving Female Adapter: 22mm×¾, D-DN25×1 - Moving Female Adapter: 28 mm×1, D-DN32×1¼ - Moving Female Adapter: 35mm×1¼, D-DN40×1½ - Moving Female Adapter: 42mm×1½, D-DN50×2 - Moving Female Adapter: 54 mm×2, D-DN10 - Slip coupling: 15mm, D-DN15 - Slip coupling: 18mm, D-DN20 - Slip coupling: 22mm, D-DN25 - Slip coupling: 28mm, D-DN32 - Slip coupling: 35mm, D-DN40 - Slip coupling: 42mm, D-DN50 - Slip coupling: 54mm, DN10×½ - Hexagonal male connector: 15mm×½, DN10×¾ - Hexagonal male connector: 15mm×¾, DN15×½ - Hexagonal male connector: 18 mm×½, DN20×¾ - Hexagonal male connector: 22 mm×¾, DN25×1 - Hexagonal male connector: 28mm×1, DN32×1¼ - Hexagonal male connector: 35 mm×1¼, DN40×1½ - Hexagonal male connector: 42mm×1½, DN50×2 - Hexagonal male connector: 54mm×2, D-DN10 - Caps: 15mm, D-DN15 - Caps: 18mm, D-DN20 - Caps: 22mm, D-DN25 - Caps: 28mm, D-DN32 - Caps: 35mm, D-DN40 - Caps: 42mm, D-DN50 - Caps: 54mm, DN15 - Straight Tube Fittings: 18mm, DN20 - Straight Tube Fittings: 22mm, DN25 - Straight Tube Fittings: 28mm, DN10 - Layflat bridge: 15mm, DN15 - Layflat bridge: 18mm, DN20 - Layflat bridge: 22mm, DN25 - Layflat bridge: 28mm, D-DN25 - Flange adapters: 28mm, D-DN32 - Flange adapters: 35mm, D-DN40 - Flange adapters: 42mm, D-DN50 - Flange adapters: 54mm.

E-DN10 - 90° Equal Elbow: 15mm, E-DN15 - 90° Equal Elbow: 18mm, E-DN20 - 90° Equal Elbow: 22mm, E-DN25 - 90° Equal Elbow: 28mm, E-DN32 - 90° Equal Elbow: 35mm, E-DN40 - 90° Equal Elbow: 42mm, E-DN50 - 90° Equal Elbow: 54mm, E-DN10 - 90° B-type equal elbow: 15mm, E-DN15 - 90° B-type equal elbow: 18mm, E-DN20 - 90° B-type equal elbow: 22mm, E-DN25 - 90° B-type equal elbow: 28mm, E-DN32 - 90° B-type equal elbow: 35mm, E-DN40 - 90° B-type equal elbow: 42mm, E-DN50 - 90° B-type equal elbow: 54mm, E-DN15×10 - 90° Reducing Elbow: 15×18mm, E-DN20×15 - 90° Reducing Elbow: 22×18mm, E-DN25×15 - 90° Reducing Elbow: 28×18mm, E-DN25×20 - 90° Reducing Elbow: 28×22mm, E-DN10×½ - 90° Male Elbow: 15mm×½, E-DN10×¾ - 90° Male Elbow: 15mm×¾, E-DN15×½ - 90° Male Elbow: 18mm×½, E-DN15×¾ - 90° Male Elbow: 18mm×¾, E-DN20×¾ - 90° Male Elbow: 22mm×¾, E-DN25×1 - 90° Male Elbow: 28 mm×1, E-DN32×1¼ - 90° Male Elbow: 35mm×1¼, E-DN40×1½ - 90° Male Elbow: 42mm×1½, E-DN50×2 - 90° Male Elbow: 54mm×2, E-DN10×½ - 90° female elbow: 15mm×½, E-DN10×¾ - 90° female elbow: 15mm×¾, E-DN15×½ - 90° female elbow: 18mm×½, E-DN15×¾ - 90° female elbow: 18mm×¾, E-DN20×¾ - 90° female elbow: 22mm×¾, E-DN25×1 - 90° female elbow: 28 mm×1, E-DN32×1¼ - 90° female elbow: 35mm×1¼, E-DN40×1½ - 90° female elbow: 42mm×1½, E-DN50×2 - 90° female elbow: 54 mm×2, E-DN10 - 45° Equal Elbow: 15mm, E-DN15 - 45° Equal Elbow: 18mm, E-DN20 - 45° Equal Elbow: 22mm, E-DN25 - 45° Equal Elbow: 28mm, E-DN32 - 45° Equal Elbow: 35mm, E-DN40 - 45° Equal Elbow: 42mm, E-DN50 - 45° Equal Elbow: 54mm, E-DN10 - 45° B-type equal elbow: 15mm, E-DN15 - 45° B-type equal elbow: 18mm, E-DN20 - 45° B-type equal elbow: 22mm, E-DN25 - 45° B-type equal elbow: 28mm, E-DN32 - 45° B-type equal elbow: 35mm, E-DN40 - 45° B-type equal elbow: 42mm, E-DN50 - 45° B-type equal elbow: 54mm, E-DN10 - Equal tee: 15mm, E-DN15 - Equal tee: 18mm, E-DN20 - Equal tee: 22mm, E-DN25 - Equal tee: 28mm, E-DN32 - Equal tee: 35mm, E-DN40 - Equal tee: 42mm, E-DN50 - Equal tee: 54mm, E-DN15×10 - Reducing Tee: 18×15mm, E-DN20×10 - Reducing Tee: 22×15mm, E-DN20×15 - Reducing Tee: 22×18mm, E-DN25×10 - Reducing Tee: 28×15mm, E-DN25×15 - Reducing Tee: 28×18mm, E-DN25×20 - Reducing Tee: 28×22mm, E-DN32×10 - Reducing Tee: 35×15mm, E-DN32×15 - Reducing Tee: 35×18mm, E-DN32×20 - Reducing Tee: 35×22mm, E-DN32×25 - Reducing Tee: 35×28mm, E-DN40×15 - Reducing Tee: 42×18mm, E-DN40×20 - Reducing Tee: 42×22mm, E-DN40×25 - Reducing Tee: 42×28mm, E-DN40×32 - Reducing Tee: 42×35mm, E-DN50×20 - Reducing Tee: 54×22mm, E-DN50×25 - Reducing Tee: 54×28mm, E-DN50×32 - Reducing Tee: 54×35mm, E-DN50×40 - Reducing Tee: 54×42mm, E-DN10×½ - Short elbow with female: 15mm×½, E-DN10×¾ - Short elbow with female: 15mm×¾, E-DN15×½ - Short elbow with female: 18mm×½, E-DN15×¾ - Short elbow with female: 18mm×¾, E-DN20×¾ - Short elbow with female: 22mm×¾, E-DN25×½ - Short elbow with female: 28mm×½, E-DN25×¾ - Short elbow with female: 28mm×¾, E-DN25×1 - Short elbow with female: 28mm×1, E-DN10×½ - Female Tee: 15mm×½, E-DN10×¾ - Female Tee: 15mm×¾, E-DN15×½ - Female Tee: 18mm×½, E-DN15×¾ - Female Tee: 18mm×¾, E-DN20×½ - Female Tee: 22mm×½, E-DN20×¾ - Female Tee: 22mm×¾, E-DN25×½ - Female Tee: 28mm×½, E-DN25×¾ - Female Tee: 28mm×¾, E-DN25×1 - Female Tee: 28 mm×1, E-DN32×½ - Female Tee: 35mm×½, E-DN32×¾ - Female Tee: 35mm×¾, E-DN32×1¼ - Female Tee: 35mm×1¼, E-DN40×½ - Female Tee: 42mm×½, E-DN40×¾ - Female Tee: 42mm×¾, E-DN40×1¼ - Female Tee: 42mm×1¼, E-DN40×1½ - Female Tee: 42mm×1½, E-DN50×½ - Female Tee: 54mm×½, E-DN50×¾ - Female Tee: 54mm×¾, E-DN50×2 - Female Tee: 54mm×2, E-DN10×½ - Male Tee: 15mm×½, E-DN10×¾ - Male Tee: 15mm×¾, E-DN15×½ - Male Tee: 18mm×½, E-DN15×¾ - Male Tee: 18mm×¾, E-DN20×½ - Male Tee: 22mm×½, E-DN20×¾ - Male Tee: 22mm×¾, E-DN25×½ - Male Tee: 28mm×½, E-DN25×¾ - Male Tee: 28mm×¾, E-DN25×1 - Male Tee: 28 mm×1, E-DN32×½ - Male Tee: 35mm×½, E-DN32×¾ - Male Tee: 35mm×¾, E-DN32×1¼ - Male Tee: 35mm×1¼, E-DN40×½ - Male Tee: 42mm×½, E-DN40×¾ - Male Tee: 42mm×¾, E-DN40×1¼ - Male Tee: 42mm×1¼, E-DN40×1½ - Male Tee: 42mm×1½, E-DN50×½ - Male Tee: 54mm×½, E-DN50×¾ - Male Tee: 54mm×¾, E-DN50×2 - Male Tee: 54 mm×2, E-DN10×½ - Male Adapter: 15mm×½, E-DN10×¾ - Male Adapter: 15mm×¾, E-DN15×½ - Male Adapter: 18mm×½, E-DN15×¾ - Male Adapter: 18mm×¾, E-DN20×½ - Male Adapter: 22mm×½, E-DN20×¾ - Male Adapter: 22mm×¾, E-DN20×1 - Male Adapter: 22mm×1, E-DN25×¾ - Male Adapter: 28mm×¾, E-DN25×1 - Male Adapter: 28mm×1, E-DN32×1 - Male Adapter: 35 mm×1, E-DN32×1¼ - Male Adapter: 35mm×1¼, E-DN40×1½ - Male Adapter: 42mm×1½, E-DN50×2 - Male Adapter: 54 m×2, E-DN10 - Equal coupling: 15mm, E-DN15 - Equal coupling: 18mm, E-DN20 - Equal coupling: 22mm, E-DN25 - Equal coupling: 28mm, E-DN32 - Equal coupling: 35mm, E-DN40 - Equal coupling: 42mm, E-DN50 - Equal coupling: 54mm, E-DN15×10 - Reducing coupling: 18×15mm, E-DN20×10 - Reducing coupling: 22×15mm, E-DN20×15 - Reducing coupling: 22×18mm, E-DN25×10 - Reducing coupling: 28×15mm, E-DN25×15 - Reducing coupling: 28×18mm, E-DN25×20 - Reducing coupling: 28×22mm, E-DN32×15 - Reducing coupling: 35×18mm, E-DN32×20 - Reducing coupling: 35×22mm, E-DN32×25 - Reducing coupling: 35×28mm, E-DN40×15 - Reducing coupling: 42×18mm, E-DN40×20 - Reducing coupling: 42×22mm, E-DN40×25 - Reducing coupling: 42×28mm, E-DN40×32 - Reducing coupling: 42×35mm, E-DN50×15 - Reducing coupling: 54×18mm, E-DN50×20 - Reducing coupling: 54×22mm, E-DN50×25 - Reducing coupling: 54×28mm, E-DN50×32 - Reducing coupling: 54×35mm, E-DN50×40 - Reducing coupling: 54×42mm, E-DN10×½ - Female Adapter: 15mm×½, E-DN10×¾ - Female Adapter: 15mm×¾, E-DN15×½ - Female Adapter: 18mm×½, E-DN15×¾ - Female Adapter: 18mm×¾, E-DN20×½ - Female Adapter: 22mm×½, E-DN20×¾ - Female Adapter: 22mm×¾, E-DN25×½ - Female Adapter: 28mm×½, E-DN25×¾ - Female Adapter: 28mm×¾, E-DN25×1 - Female Adapter: 28mm×1, E-DN32×1¼ - Female Adapter: 35mm×1¼, E-DN40×1½ - Female Adapter: 42mm×1½, E-DN50×2 - Female Adapter: 54mm×2, E-DN10×½ - Moving Female Adapter: 15mm×½, E-DN10×¾ - Moving Female Adapter: 15mm×¾, E-DN15×½ - Moving Female Adapter: 18mm×½, E-DN15×¾ - Moving Female Adapter: 18mm×¾, E-DN20×½ - Moving Female Adapter: 22mm×½, E-DN20×¾ - Moving Female Adapter: 22mm×¾, E-DN25×1 - Moving Female Adapter: 28 mm×1, E-DN32×1¼ - Moving Female Adapter: 35mm×1¼, E-DN40×1½ - Moving Female Adapter: 42mm×1½, E-DN50×2 - Moving Female Adapter: 54 mm×2, E-DN10 - Slip coupling: 15mm, E-DN15 - Slip coupling: 18mm, E-DN20 - Slip coupling: 22mm, E-DN25 - Slip coupling: 28mm, E-DN32 - Slip coupling: 35mm, E-DN40 - Slip coupling: 42mm, E-DN50 - Slip coupling: 54mm, E-DN10 - Caps: 15mm, E-DN15 - Caps: 18mm, E-DN20 - Caps: 22mm, E-DN25 - Caps: 28mm, E-DN32 - Caps: 35mm, E-DN40 - Caps: 42mm, E-DN50 - Caps: 54mm, E-DN25 - Flange adapters: 28mm, E-DN32 - Flange adapters: 35mm, E-DN40 - Flange adapters: 42mm, E-DN50 - Flange adapters: 54mm.

Product Images

Approval Holder:

Wegs Hubei Fluid Technology Co., Ltd

Company Name

Wegs Hubei Fluid Technology Co., Ltd

Address

Intersection of Xiyuan 7th Road and Xiyuan 10th Road, Phase III, Hitech Development Zone, Xianning City, Hubei Province

Country

China

View All Listings by this Company

Manufacturer:

Wegs Hubei Fluid Technology Co., Ltd

Company Name

Wegs Hubei Fluid Technology Co., Ltd

Address

Intersection of Xiyuan 7th Road and Xiyuan 10th Road, Phase III, Hitech Development Zone, Xianning City, Hubei Province

Country

China

View All Listings by this Company

Dual flush, WC outlet valves for either full or reduced flush. Incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250902702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M)

Marking:

R&T logo & model body.

Installation Requirements:

R001 R556 R571

Expiry date:

30/09/2030

Model:

A2415L, A2415M & A2706

Manufacturer:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

View All Listings by this Company

Range of pre-assembled hydraulic blocks incorporating plate heat exchangers, pressure relief valves set at 3.0 bar, circulation pumps and flow regulators. Maximum working pressure: Primary 2.5bar & secondary 10 bar. Maximum operating temperature 80°C (CH) & 60°C (DHW).

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm & 22mm Compression.

Marking:

Bosch, model code and other technical information on adhesive label on assembly.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

8-718-684-683.

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company

Manufacturer:

Bosch Thermotechnik GmbH

Company Name

Bosch Thermotechnik GmbH

Address

Sophienstrasse 30 - 32 D-35576 Wetzlar Germany

View All Listings by this Company

Range of floor-standing gas combination boilers, supplied with isolation valves, expansion vessel and a pressure relief valve set at 3.0 bar. Maximum working pressure: Primary circuit 2.5 bar, secondary 10 bar. Maximum operating temperature: Primary 82°C / secondary circuit 60°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

250904711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

22mm compression.

Marking:

Worcester on front cover. Worcester and product info on label inside cover.

Installation Requirements:

R001 R140 R360

Expiry date:

30/09/2030

Model:

7-731-600-297 Greenstar 8000F 35kW Combi NG, 7-731-600-298 Greenstar 8000F 35kW Combi LPG, 7-731-600-299 Greenstar 8000F 50kW Combi NG, 7-731-600-300 Greenstar 8000F 50kW Combi LPG.

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company

Range of water meters with brass bodies. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature is 50°C or 85°C, please refer to model.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) or 1” BSP (M)

Marking:

APATOR, date of manufacture (YYYY) and product information on face of water meter. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Maximum operating temperature 50°C: JS 1,6-02 JS 1,6-04 JS 1,6-NK JS 1,6-NKP JS 4-02 JS 4-04 JS 4-NK JS 4-NKP JS 2,5-02 JS 2,5-04 JS 2,5-NK JS 2,5-NKP JS 2,5-G1-02 JS 2,5-G1-04 JS 2,5-G1-NK JS 2,5-G1-NKP Maximum operating temperature 85°C: JS90 1,6-02 JS90 1,6-04 JS90 1,6-NK JS901,6-NKP JS90 2,5-02 JS90 2,5-04 JS90 2,5-NK JS90 2,5-NKP JS90 2,5-G1-02 JS90 2,5-G1-04 JS90 2,5-G1-NK JS90 2,5-G1-NKP JS90 4-02 JS90 4-04 JS90 4-NK JS90 4-NKP

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

View All Listings by this Company

An in-line ultra-sonic water meter with brass (WM15) or plastic (SM15) bodies. Maximum working pressure: 16 Bar. Maximum operating temperature: 50°C (WM15) or 70°C (SM15).

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

Sagemcom, CE, DN, max temperature and other technical information on meter face. Flow arrow on body

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

WM15: available in 110mm, 115mm, 165mm lengths. SM15: available in 110mm length.

Approval Holder:

Sagemcom Energy & Telecom

Company Name

Sagemcom Energy & Telecom

View All Listings by this Company

Range of water meters with plastic bodies and plastic turbines. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SJ-SDC plus.

Marking:

NWM, NWM logo, and tech info on dial face. Flow arrow and DN on valve body. NWM & NWM logo on cover.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

½” BSP (M) inlet / ½” BSP (M)outlet (DN15), ¾” BSP (M) inlet / ¾” BSP (M)outlet (DN20), ½” NPT (M) inlet / ½” NPT (M) outlet (DN15), ¾” NPT (M) inlet / ¾” NPT (M) outlet (DN20).

Approval Holder:

Ningbo Water Meter (Group) Co., Ltd

Company Name

Ningbo Water Meter (Group) Co., Ltd

Address

No 355 Hongxing Road Jiangbei District Ningbo

Country

China

View All Listings by this Company

Compact wall outlet elbow with brass body (various finishes). Maximum operating temperature 85.0°C Open outlet use only

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Aqualisa on body

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

1001359 ** ** Where ** ** denotes the finish and can be replaced with the following: AA = Chrome AD = Matt Black AH = Core Brushed Brass Post 24 (Xenia) AJ = Core Brushed Gunmetal Grey AQ = Aqualisa (Brand)

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of flow sensors incorporating either brass, plastic or stainless steel bodies & EPDM ‘O’-rings. Maximum working pressure 10.0 bar for models VVXA, VVXC, VVXB. Maximum working pressure 16.0 bar for models VVXD & VVXE. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Sika logo, pressure, temperature, other tech info on body; flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

VVXA Vortex Flow Sensor Type VVX15 Vortex Flow Sensor nominal size 15. Body material PPS, G ¾ male or ½” NPT male VVXC Vortex Flow Sensor Type VVX20 Vortex Flow Sensor nominal size 20. Body material PPS G 1 male or ¾” NPT male or Quick-Fasten male/female VVXB Vortex Flow Sensor Type VVX25 Vortex Flow Sensor nominal size 25. Body material PPS G 1¼ male or 1” NPT male VVXD Vortex Flow Sensor Type VVX32 Vortex Flow Sensor nominal size 32. Body material brass or stainless steel G 1½ male or 1½” NPT male VVXE Vortex Flow Sensor Type VVX40 Vortex Flow Sensor nominal size 40. Body material brass or stainless steel G 2 male or 2” NPT male • digit 1,2,3: Designation of the series o VVX >>> VVX series • digit 4: nominal diameter o A >>> DN 15 for type VVX15 o C >>> DN 20 for type VVX20 o B >>> DN 25 for type VVX25 o D >>> DN 32 for type VVX32 o E >>> DN 40 for type VVX40 • digit 5,7,8,9,10,11,12,13,14,15: Device configuration • digit 6: Private label o S >>> SIKA (standard) o E >>> SIKA (standard) with ETL marking • digit 4 and 16: tube material / process connection o A and 4 >>> PPS – G 3/4 male thread o A and C >>> PPS – ½”NPT male thread o C and P >>> PPS – Quick-Fasten connection o C and 7 >>> PPS – G 1 male thread o C and 8 >>> PPS – 3/4" NPT male thread o B and 6 >>> PPS – G 1 1/4 male thread o B and E >>> PPS – 1” NPT male thread o D and U >>> Brass – G 1 1/2 male thread o D and 0 >>> Brass – 1½" NPT male thread o D and M >>> Stainless steel – G 1 1/2 male thread o D and Y >>> Stainless steel – 1½" NPT male thread o E and X >>> Brass – G 2 male thread o E and 9 >>> Brass – 2" NPT male thread o E and O >>> Stainless steel – G 2 male thread o E and Z >>> Stainless steel – 2" NPT male thread

Approval Holder:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Range of EPDM expansion joints with flanged end conenctors. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

SHANGHAI LIANYANG METAL & RUBBER CO., LTD logo (‘MR-FLEX’) and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

S-100: DN32 - DN300, S-101: DN25 - DN300, S-115: DN25 - DN300.

Product Images

Approval Holder:

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Company Name

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Address

No.2 Building, No.399 Zhongqu Road, Industrial estate Maogang Town, Songjiang, Shanghai

Country

China

General Email

sha.lyang@kenpogroup.com

View All Listings by this Company

Manufacturer:

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Company Name

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Address

No.2 Building, No.399 Zhongqu Road, Industrial estate Maogang Town, Songjiang, Shanghai

Country

China

General Email

sha.lyang@kenpogroup.com

View All Listings by this Company