Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (brass body, various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a ceramic disk diverter with dome type operating member controlling the flow between the outlets. The spout outlet incorporates a plastic aerator. Maximum working pressure: 10.0 Bar Maximum operating temperature: 60°c

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

251202023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” x ½” BSP Offset unions.

Marking:

Villeroy Boch on operating member

Installation Requirements:

R001 R020 R040

Expiry date:

31/12/2030

Model:

TVS116003000XX XX at the end indicates the Finish of surfaces that are not in contact with water (61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel) E.g. Skyla Shower Tap with chrome finish (TVS11600400061).

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of two hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks and lever type operating members. The spout outlet incorporates a plastic aerator and supplied with metal back nuts. Maximum operating pressure 5.5 bar. Maximum operating temperature 60°C

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

251204015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

CAL’ On rear of body

Installation Requirements:

R001 R006 R010

Expiry date:

31/12/2030

Model:

ACT3070 ACT3071 ACT3072 ACT3099 ACT3100 ACT3101 ACT3102 ACT3119 Models ‘ACT3070 (Chrome), ‘ACT3071 (Brushed Nickel)’, ACT3072 (Brushed Brass) are the same and only differ in the tap finish. Models ‘ACT3099’ (Chrome), ACT3100 (Brushed Nickel), ACT3101 (Brushed Brass), ACT3102 (Aged Brass), ACT3119 (Matt Black)

Approval Holder:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road Barnsley

Postcode

S75 1HT

Country

United Kingdom

Phone

01226 283434

General Email

info@abode.eu

View All Listings by this Company

Section:

0570 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a double outlet and a swivel spout.

Deck Mounted Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006

Expiry date:

30/04/2031

Notes & Further Information

VAL2 BRDSM C 6 CD - has a 6 inch lever

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

‘HydroDOS’ chlorine dioxide dosing system with PVC-u pipework, water meter, strainer, isolation valves and a drain cock with hose spigot. Maximum working pressure 6.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

251202715

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

20mm PVC solvent weld connection

Marking:

HydroDOS, model, WRAS and technical data on adhesive label on body.

Installation Requirements:

R001 R120 R160 R170 R415 R511 R575

Expiry date:

31/12/2030

Model:

HydroDOS HD550G Chlorine dioxide generator (215 g/hr max). HydroDOS HD600G Chlorine dioxide generator (600 g/hr max).

Approval Holder:

Hydrotec International Water Treatment Limited

Company Name

Hydrotec International Water Treatment Limited

Address

38 Main Street Swords Country Dublin

Country

Ireland

View All Listings by this Company

Expansion vessel with a carbon steel body, polypropylene cover and a butyl membrane. Maximum working pressure: 10 Bar. Maximum operating temperature: 99°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Taizhou Tianyang Electrical Co Ltd, model, max pressure, max temp, product info on body

Installation Requirements:

R001 R530

Expiry date:

31/12/2030

Model:

TY-01-2L-P.

Approval Holder:

Taizhou Tianyang Electrical Co., Ltd.

Company Name

Taizhou Tianyang Electrical Co., Ltd.

Address

Shangma Industrial Zone, Wenling City, Taizhou

Country

Zhejiang,

Phone

86?576?89956882

View All Listings by this Company

Expansion vessels incorporating a stainless-steel body and SEFA membrane. Maximum working pressure: 10 bar, except A2C2R27 WR000 (DP 24/16X) 1” BSPP (M) which is 16 bar. Maximum operating temperature 85˚C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

ELBI, Model name, Serial, Production number, Nominal capacity, Max pressure and other technical information on lable on body.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

A2C2L11 WR000 (DP-5X) ¾” BSPP (M), A2C2L16 WR000 (DP-8X) ¾” BSPP (M), A2C2L19 WR000 (DP11X) ¾” BSPP (M), A2C2L24 WR000 (DP-18X) ¾” BSPP (M), A2C2L27 WR000 (DP-24X) 1” BSPP (M), A2C2L31 WR000 (DP-35X) 1” BSPP (M). A2C2L34 WR000 (DP-50X) 1” BSPP (M), A2C2L35 WR000 (DPV-60X) 1” BSPP (M), A2C2L37 WR000 (DPV-80X) 1” BSPP (M), A2C2L38 WR000 (DPV-100X) 1 ¼”” BSPP (M), A2C2L43 WR000 (DPV-150X) 1 ¼”” BSPP (M), A2C2L47 WR000 (DPV-200X) 1 ¼”” BSPP (M), A2C2L51 WR000 (DPV-300X) 1 ¼”” BSPP (M), A2C2L55 WR000 (DPV-500X) 1” BSPP (M). A2E2L25 WR000 (DPH-20X) 1” BSPP (M), A2E2L27 WR000 (DPH 24X) 1” BSPP (M), A2E2L35 WR000 (DPH 60X) 1” BSPP (M), A2F2L25 WR000 (DPH-20X G3/4”) 3/4” BSPP (M), A2F2L27 WR000 (DPH-24X G3/4”) 3/4” BSPP (M). A2C2R27 WR000 (DP 24/16X) 1” BSPP (M).

Approval Holder:

Elbi SPA

Company Name

Elbi SPA

Address

Via Buccia 9 35010 Limena PD Italy

View All Listings by this Company

Range of expansion vessels having stainless steel bodies. Maximum operating pressure 7 - 25 bar. Maximum operating temperature 85°C

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Global Water Solutions and technical info on label.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

MTRA-2-7 MTRA-3-7 MTRA-4-7 MTRA-6-7 MTRA-8-7 MTRA-12-7 MTRA-18-7 MTRA-21-7 MTRA-35-7 MTRA-60-7 MTRA-80-7 7 bar Available in the following sizes: 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), 22mm compression fitting MTRA-100-7 MTRA-150-7 7 Bar Available in the following sizes: 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M) STRA-8-7 STRA-18-7 7 bar Available in the following sizes: 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), 22mm compression fitting PTRA-12-7 PTRA-16-7 PTRA-18-7 7 bar Available in the following sizes: 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), 22mm compression fitting MTPA-2-10 MTPA-3-10 MTPA-4-10 MTPA-6-10 MTPA-8-10 MTPA-12-10 MTPA-18-10 MTPA-20-10 MTPA-24-10 MTPA-35-10 MTPA-40-10 10 bar Available in the following sizes: 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), 22mm compression fitting MTPA-22-10 10 bar Available in the following sizes: ¾” quick connect MTPA-60-10 MTPA-80-10 MTPA-100-10 MTPA-130-10 MTPA-150-10 10 bar Available in the following sizes: 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M) MTPB-2-10 MTPB-4-10 MTPB-8-10 MTPB-12-10 MTPB-18-10 MTPB-24-10 MTPB-35-10 10 bar Available in the following sizes: 1” BSP (M), 1” BSP (F), ¾” BSP (M), 1” NPT (M), 1” NPT (F), 22mm compression fitting STPA-18-10 STPA-24-10 10 bar Available in the following sizes 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), 22mm compression fitting STPA-22-10 10 bar Available in the folowoing sizes ¾” quick connect STPB-8-10 STPB-18-10 STPB-24-10 10 bar Available in the following sizes 1” BSP (M), 1” BSP (F), 1” NPT (M), 1” NPT (F), 22mm compression fitting PTPB-18-10 PTPB-24-10 10 bar Available in the following sizes 1” BSP (M), 1” BSP (F), ¾” BSP (M), 1” NPT (M), 1” NPT (F), 22mm compression fitting MTPE-18-10 MTPE-24-10 10 bar Available in the follwoiing sizes 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), 22mm compression fitting MTMA-2-16 16 bar Available in the following sizes 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), 22mm compression fitting MTMA-60-16 MTMA-80-16 MTMA-100-16 16 bar Available in thre following sizes 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M) MTMB-2-16 MTMB-4-16 MTMB-8-16 MTMB-12-16 MTMB-18-16 MTMB-24-16 MTMB-35-16 16 bar Available in the follow9ng sizes 1” BSP (M), 1” BSP (F), ¾” BSP (M), 1” NPT (M), 1” NPT (F), 22mm compression fitting STMB-8-16 STMB-18-16 STMB-24-16 16 bar Available in the following sizes 1” BSP (M), 1” BSP (F), 1” NPT (M), 1” NPT (F), 22mm compression fitting MTUB-8-25 MTUB-24-25 25 bar Available in the following sizes 1” BSP (M), 1” BSP (F), ¾” BSP (M), 1” NPT (M), 1” NPT (F), 22mm compression fitting MTUA-100-25 25 bar Available in the following sizes 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), HTSA-0.16-10 10 bar Available in the following sizes ¼” BSP (M), ½” BSP (M), ¼” NPT (M), ½” NPT (M), ½” PF (BSPP) (M). HTSC-0.3-10 HTSC-0.6-10 HTSD-0.3-10 HTSG-0.3-10 10 bar Available in the following sizes 1¼” BSP (M), 1” BSP (M), ½” BSP (M), ¼” BSP (M), HTSC-0.5-10 HTSD-0.5-10 10 bar Available in the following sizes ½” BSP (M), ¼” BSP (M) HTSH-0.6-10 10 bar Available in the following sizes 1¼” BSPP (M), HTSB-1-10 HTSP-1-10 10 bar Available in the following sizes 1/2” BSP (M) HTSC-1-10 10 bar Available in the following sizes 1” quick 1/2” BSP (M) HTTA-2-10 HTTD-2-10 10 bar Available in the following sizes ¾” quick connect HTTM-2-12 12 bar Available in the following sizes ¾” quick connect

Approval Holder:

Global Water Solutions Ltd.

Company Name

Global Water Solutions Ltd.

Address

5th Floor, 37 Esplanade, St. Helier Jersey The Channel Islands

Postcode

JE1 2TR

Country

United Kingdom

Phone

+886 4 2622 0078

General Email

adam@globalwatersolutions.com

View All Listings by this Company

Range of ZL brass compression fittings. Compression connection is to be used with copper pipe EN1057. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

251212020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to models

Marking:

Company name(zhongliang), Model, size on body.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

ZL-9822-15,15mm ZL-9822-22, 22mm ZL-9822-28, 28mm ZL-9801-15*1/2M-00,15mm ZL-9801-15*3/4M-00, 15mm ZL-9801-22*3/4M-00, 22mm ZL-9801-22*1M-00, 22mm ZL-9801-28*1M-00, 28mm ZL-9801-28*3/4M-00, 28mm ZL-9801-22*15-00, 22mm ZL-9801-28*22-00, 28mm ZL-9801-15*15-00, 15mm ZL-9801-22*22-00, 22mm ZL-9801-28*28-00, 28mm ZL-9802-15*1/2F-00, 15mm ZL-9802-15*3/4F-00, 15mm ZL-9802-22*3/4F-00, 22mm ZL-9802-22*1F-00, 22mm ZL-9802-28*1F-00, 28mm ZL-9802-28*3/4F-00, 28mm ZL-9811-15*1/2M-00, 15mm ZL-9811-15*3/4M-00, 15mm ZL-9811-22*3/4M-00, 22mm ZL-9811-22*1M-00, 22mm ZL-9811-28*1M-00, 28mm ZL-9811-28*3/4M-00, 28mm ZL-9811-15*16-00, 15mm ZL-9811-15*15-00, 15mm ZL-9811-22*22-00, 22mm ZL-9811-28*28-00, 28mm ZL-9811-15*1/2F-00, 15mm ZL-9811-15*3/4F-00, 15mm ZL-9811-22*3/4F-00, 22mm ZL-9811-22*1F-00, 22mm ZL-9811-28*1F-00, 28mm ZL-9811-28*3/4F-00, 28mm ZL-9814-1/2*15-00, 15mm ZL-9816-15-00, 15mm ZL-9817-15-00, 15mm ZL-9831-1/2*15-00, 15mm

Approval Holder:

Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.

Company Name

Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.

Address

122 Qiutao West Road, Qinggang Town, Yuhuan Country, Taizhou City

Country

China

View All Listings by this Company

Manufacturer:

Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.

Company Name

Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.

Address

122 Qiutao West Road, Qinggang Town, Yuhuan Country, Taizhou City

Country

China

View All Listings by this Company

Plastic bodied inline push fit reducer for use with Shin Won Tube Co., Ltd. SWPE™ (LLDPE) tube, (not covered by the scope of this approval). Maximum working pressure 10.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251202019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The SWPE™ (LLDPE) tube is not covered by the scope of this approval.

Size:

¼” push fit x ⅜” push fit.

Marking:

ST, size and Stormtec logo on body.

Installation Requirements:

R001 R008

Expiry date:

31/12/2030

Model:

1A1401W702

Approval Holder:

Stormtec Co., Ltd.

Company Name

Stormtec Co., Ltd.

Address

143, Hwagok-ro 68gil, Gangseo Seoul 07551

Country

Korea, Republic of

General Email

info@stormtec.co.kr

View All Listings by this Company

‘SLD’ range of copper press fittings with ‘V’ and ‘M’ press profiles and EPDM ‘O’ rings. Fittings to be used with copper pipe manufactured to EN1057. Maximum working pressure: 16 Bar. Maximum operating temperature: 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251202035

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Solerad & size on body

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

SLD Equal Coupler V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Reducing Coupler V Press profile 22×15 mm 28×15 mm 28×22 mm 35×15 mm 35×22 mm 35×28 mm 42×15 mm 42×22 mm 42×28 mm 42×35 mm 54×15 mm 54×22 mm 54×28 mm 54×35 mm 54×42 mm SLD Fitting Reducer V Press profile 22×15 mm 28×15 mm 28×22 mm 35×15 mm 35×22 mm 35×28 mm 42×15 mm 42×22 mm 42×28 mm 42×35 mm 54×15 mm 54×22 mm 54×28 mm 54×35 mm 54×42 mm SLD 90° Elbow V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 90° Street Elbow V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 45° Elbow V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 45° Street Elbow V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Equal Tee V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Reduced Tee(Middle) V Press profile 22×15×22 mm 28×15×28 mm 28×22×28 mm 35×15×35 mm 35×22×35 mm 35×28×35 mm 42×15×42 mm 42×22×42 mm 42×28×42 mm 42×35×42 mm 54×22×54 mm 54×28×54 mm 54×35×54 mm 54×42×54 mm SLD Reduced Tee(End) V Press profile 22 x 15 x 15 mm 28 x 22 x 22 mm 35 x 22 x 22 mm 22 x 22 x 15 mm 28 x 28 x 15 mm 28 x 28 x 22 mm 35 x 35 x 22 mm 35 x 35 x 28 mm 42 x 35 x 35 mm SLD End Stop V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Crossover V Press profile 15 mm 22 mm SLD Part Crossover V Press profile 15 mm 22 mm

SLD Equal Coupler M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Slip Long Coupler M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 SLD Reducing Coupler M press profile 22×15 mm 28×15 mm 28×22 mm 35×15 mm 35×22 mm 35×28 mm 42×15 mm 42×22 mm 42×28 mm 42×35 mm 54×15 mm 54×22 mm 54×28 mm 54×35 mm 54×42 mm SLD Fitting Reducer M press profile 22×15 mm 28×15 mm 28×22 mm 35×15 mm 35×22 mm 35×28 mm 42×15 mm 42×22 mm 42×28 mm 42×35 mm 54×15 mm 54×22 mm 54×28 mm 54×35 mm 54×42 mm SLD 90° Elbow M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 90° Street Elbow M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 45° Elbow M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 45° Street Elbow M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Equal Tee M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Reduced Tee(Middle) M press profile 22×15×22 mm 28×15×28 mm 28×22×28 mm 35×15×35 mm 35×22×35 mm 35×28×35 mm 42×15×42 mm 42×22×42 mm 42×28×42 mm 42×35×42 mm 54×22×54 mm 54×28×54 mm 54×35×54 mm 54×42×54 mm SLD Reduced Tee(End) M press profile 22 x 15 x 15 mm 28 x 22 x 22 mm 35 x 22 x 22 mm 22 x 22 x 15 mm 28 x 28 x 15 mm 28 x 28 x 22 mm 35 x 35 x 22 mm 35 x 35 x 28 mm 42 x 35 x 35 mm SLD End Stop M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Crossover M press profile 15 mm 22 mm SLD Part Crossover M press profile 15 mm 22 mm

Approval Holder:

Zhejiang Solerad Environment Technology Co., Ltd.

Company Name

Zhejiang Solerad Environment Technology Co., Ltd.

Address

Diankou Industry Zone, Zhuji City, Zhejiang Province

Country

China

View All Listings by this Company