Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #240855046

'Enviroline 2405'. Site applied, off-white coloured (once mixed and applied), two-component epoxy. Mix parts A (light grey, opaque liquid) and B (white, opaque liquid) in a volume ratio of 2:1 and apply as per manufacturer's TDS 'Ref:10139', 'Issue Date:8/21/2017'. Cure for 7 days@25°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5042 Coatings, Paints & Linings
Section Subtitle:: Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:: 240855046
Expiry date:: 31/08/2029

Approval Holder:: Akzo Nobel Saudi Arabia Ltd.

Company Name
Akzo Nobel Saudi Arabia Ltd.
Country
Saudi Arabia

View All Listings by this Company

WRAS Approval Number: #241055050

'novapress® 880'. Beige coloured fibre gasket material manufactured by calendaring. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Section:: 5075 Fibre
Section Subtitle:: These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.
WRAS Approval Number:: 241055050
Expiry date:: 31/10/2029

Approval Holder:: Frenzelit GmbH

Company Name
Frenzelit GmbH
Address
Frankenhammer, 95460 Bad Berneck, Germany
Phone
Tel: 0049 9273 720 Fax: 0049 9273-222

View All Listings by this Company

WRAS Approval Number: #241055054

'Ekomaxi Tank Panel'. Off-white coloured, compression moulded GRP panel. For use with water up to 50°C.

Section:: 5120 Glass Reinforced Plastics (GRP)
Section Subtitle:: Components.
WRAS Approval Number:: 241055054
Expiry date:: 31/10/2029

Approval Holder:: Yagiz Enerji Makine Insaat Taahhut Sanayi Tic. Ltd. Sti.

Company Name
Yagiz Enerji Makine Insaat Taahhut Sanayi Tic. Ltd. Sti.
Address
2 Organize Sanayi Bölgesi, 3 Cad.No:3, Malatya, 44100
Country
Turkey

View All Listings by this Company

WRAS Approval Number: #241055064

'ELS 108 & ELS 101'. Extruded, multi-layered hoses comprising of a black coloured PVC inner layer, white coloured polyester middle layer and grey coloured PVC outer layer. For use with water up to 23°C.

Section:: 5140 Hoses & Tubing
Expiry date:: 31/10/2029

Approval Holder:: EL-SE Kablo ve Plastik Sanayi A.S.

Company Name
EL-SE Kablo ve Plastik Sanayi A.S.
Address
Geposb 11. Cadde No. 13, PK. 41400 Gebze
Country
Turkey

View All Listings by this Company

WRAS Approval Number: #241055045

'T100M'. White coloured (translucent) grease. Apply as per manufacturer's instructions. For use with water up to 85°C.

Section:: 5160 Lubricants
Expiry date:: 31/10/2029

Approval Holder:: SHENZHEN EUBO NEW MATERIAL TECHNOLOGY CO.,LTD

Company Name
SHENZHEN EUBO NEW MATERIAL TECHNOLOGY CO.,LTD
Address
2/F, Building 1, Xinchen New Materials Pilot Industrialization Base, No. 300, Shutianpu Road, Shutianpu Community, Matian Street, Guangming District, Shenzhen, Guangdong
Country
China

View All Listings by this Company

WRAS Approval Number: #240955061

'HW Lubrex/009'. Amber coloured (translucent) lubricant. Apply as per manufacturer's instructions. For use with water up to 65°C.

Section:: 5160 Lubricants
Expiry date:: 30/09/2029

Approval Holder:: Holdwell Components Private Ltd.

Company Name
Holdwell Components Private Ltd.
Address
Plot No. 64-A, Sector-C, Urla Industrial Area, Raipur, Chhattisgarh
Postcode
492003
Country
India

View All Listings by this Company

WRAS Approval Number: #241155019

'TP-A25-PA12'. Dark grey coloured, injection moulded, PA12 bonded strontium ferrite magnet. For use with water up to 50°C.

Section:: 5165 Magnetic Material
Expiry date:: 30/11/2029

Approval Holder:: Aleph Electronics (Shenzhen) Co., Ltd.

Company Name
Aleph Electronics (Shenzhen) Co., Ltd.
Address
A20 Hengfeng Industrial City, He Zhou, Bao An Qu, Shenzhen
Country
China

View All Listings by this Company

WRAS Approval Number: #241055057

'ULTRAMID® A3EG7 AQUA BLACK 00564'. Black coloured, injection moulded PA material. For use with water up to 85°C.

Section:: 5180 Nylon
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 241055057
Expiry date:: 31/10/2029

Approval Holder:: BASF South East Asia Pte. Ltd.

Company Name
BASF South East Asia Pte. Ltd.
Address
128 Beach Road, Guoco Midtown #18-01, 189773
Country
Singapore

View All Listings by this Company

WRAS Approval Number: #241055058

'ULTRAMID® B3EG3 AQUA BLACK00564'. Black coloured, injection moulded PA material. For use with water up to 85°C.

Section:: 5180 Nylon
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 241055058
Expiry date:: 31/10/2029

WRAS Approval Number: #250155007

'DZT PANT I1000-NC; DZT PANT I10G05-NC; DZT PANT I10G10-NC; DZT PANT I10G15-NC; DZT PANT I10G20-NC; DZT PANT I10G25-NC; DZT PANT I10G30-NC; DZT PANT I10G35-NC; DZT PANT I10G40-NC; DZT PANT I10G45-NC; DZT PANT I10G50-NC; DZT PANT I10G55-NC; DZT PANT I10G60-NC; DZT PANT I10G65-NC (un-pigmented - appears beige)’. ‘DZT PANT I10G05-BK; DZT PANT I10G10-BK; DZT PANT I10G15-BK;DZT PANT I10G20-BK;DZT PANT I10G25-BK; DZT PANT I10G30-BK; DZT PANT I10G35-BK;DZT PANT I10G40-BK;DZT PANT I10G45-BK; DZT PANT I10G50-BK; DZT PANT I10G55-BK; DZT PANT I10G60-BK; DZT PANT I10G65-BK (black coloured)'. Injection moulded PA materials. For use with water up to 85°C.

Section:: 5180 Nylon
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 250155007
Expiry date:: 31/01/2030

Approval Holder:: Jiangmen De Zhong Tai Engineering Plastics Technology Co., Ltd.

Company Name
Jiangmen De Zhong Tai Engineering Plastics Technology Co., Ltd.
Address
3rd Building, East Gaoxin Road No. 33, Hi-Tech Zone, Jiangmen City, Guangdong Province
Country
China

View All Listings by this Company