Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #241015013

Range of stainless steel braided hoses, incorporating a dual layered hose consisting of a clear PE liner and black coloured EPDM outer layer. The SOG1212XXX(GLF)CS model incorporates an isolation valve. The models with compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 241015013
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model
Marking:: Coastal, WRAS and date of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: SG(1)(2)XXX DN8 bore diameter hose. Where: (1) and (2) are: options for the fittings at two ends, and can be: 12 = ½” BSP (F) captive nut. 12M = ½” BSP (M). 38 = ⅜" BSP (F) captive nut. M10 = M10 thread. 34 = ¾” BSP (F) captive nut. 12CS = ½” BSP (F) CS. SOG1212XXXCS = ½” BSP (F) CS x 15mm compression. SOG1212XXX(GLF)CS = ½” BSP (F) CS x 15mm compression with isolation valve. XXX denotes the hose length range between 30cm (030) and 200cm (200).

Approval Holder:: Coastal (Ningbo) Hardware Mfg Co Ltd

Company Name
Coastal (Ningbo) Hardware Mfg Co Ltd
Address
28# Tianlongshan Road Ningbo Economic & Technology Development Zone Ningbo
Country
China
General Email
sales@coastalningbo.com

View All Listings by this Company
Manufacturer:: Coastal (Ningbo) Hardware Mfg Co Ltd

Company Name
Coastal (Ningbo) Hardware Mfg Co Ltd
Address
28# Tianlongshan Road Ningbo Economic & Technology Development Zone Ningbo
Country
China
General Email
sales@coastalningbo.com

View All Listings by this Company

WRAS Approval Number: #241015014

Range of stainless steel braided PEX lined flexible hose assemblies with EPDM washers and/or ‘O’-rings, and brass end connections. The 15mm compression connection incorporates an isolation valve. The models with compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum working temperature 85°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 241015014
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model
Marking:: RGRB, WRAS and date of manufacture (YYYY) on sleeves.
Installation Requirements:: R001 R008
Expiry date:: 31/10/2029
Model:: YB-PEX-01 series Bore diameters: DN6, DN7, DN8, DN9, DN10. End connections: G⅜(F), G½(F), G¾(F), M8x1, M10x1, M12x1, M15x1, G⅜(M), G½(M), G¾(M), 15mm compression with isolation valve.

Manufacturer:: Jiangmen Yubo Sanitary Ware Co., Ltd.

Company Name
Jiangmen Yubo Sanitary Ware Co., Ltd.
Address
102, 202, 302, Building 32 No 8 Longxiang Rd Guangdong Province
Postcode
529729
Country
China

View All Listings by this Company

WRAS Approval Number: #241012001

PVC flexible hose assembly. Maximum working pressure 10.0 Bar. Cold water use only.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 241012001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP captive nut.
Marking:: Jiangmen Qi Shi, WRAS and year of manufacture (YYYY).
Installation Requirements:: R001 R008
Expiry date:: 31/10/2029
Model:: QS-J01.

Approval Holder:: Jiangmen Qishi Electrical Applicance Co Ltd

Company Name
Jiangmen Qishi Electrical Applicance Co Ltd
Address
Lilewei, Xinsha Industrial Park, Muzhou Town, Xinhui District, Jiangmen City, Guangdong Province
Country
China

View All Listings by this Company

WRAS Approval Number: #241015012

Range of stainless steel or black nylon braided EPDM lined flexible hose assemblies with EPDM washers and/or ‘O’-rings, and brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241015012
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model
Marking:: Jinshou, WRAS and date of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: JS-EPDM-01 series Bore diameters: DN6, DN8. End connections: M8*1, M10*1, F½".

Approval Holder:: Taizhou Jinshou Plumbing Fittings Co. Ltd.

Company Name
Taizhou Jinshou Plumbing Fittings Co. Ltd.
Address
SHANGSHAN INDUSTRIAL ZONE QINGGANG TOWN YUHUAN COUNTY
Country
CHINA

View All Listings by this Company
Manufacturer:: Taizhou Jinshou Plumbing Fittings Co. Ltd.

Company Name
Taizhou Jinshou Plumbing Fittings Co. Ltd.
Address
SHANGSHAN INDUSTRIAL ZONE QINGGANG TOWN YUHUAN COUNTY
Country
CHINA

View All Listings by this Company

WRAS Approval Number: #241012002

Stainless steel braided or nylon braided PEX lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 Bar Maximum operating temperature 85 °C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241012002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model
Marking:: Haodi, WRAS & year (YYYY) of manufacture on ferrule.
Installation Requirements:: R001 R008
Expiry date:: 31/10/2029
Model:: PEX-A-B-C-B-C-D-XXX A Outer Braiding SS Stainless Steel Braided NP Nylon Braided B Connection Material BR Brass SS Stainless Steel C Connection Size M8 M10 M12 M13 M14 F14 M15 F15 M3/8 F3/8 M1/2 F1/2 M9/16 F9/16 M3/4 F3/4 D Hose Size 006 DN6 008 DN8 010 DN10 XXX Length (mm) 150-1500

Manufacturer:: Kaiping Haodi Sanitary Ware Technology Co., Ltd

Company Name
Kaiping Haodi Sanitary Ware Technology Co., Ltd
Address
Block 1, No. 25 Jiaxing North Road, Shuikou Town, Kaiping, Guangdong
Country
China

View All Listings by this Company

WRAS Approval Number: #241012003

Stainless steel braided or nylon braided PEX lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 Bar Maximum operating temperature 85 °C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241012003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model
Marking:: KITA, PEX, DATE OF MANUFACTURE YYYY & WRAS ON CRIMPED CONNECTION
Installation Requirements:: R001 R008
Expiry date:: 31/10/2029
Model:: KITA PEX-A-B-C-B-C-D-XXX A Outer Braiding SS Stainless Steel Braided NP Nylon Braided B Connection Material BR Brass SS Stainless Steel C Connection Size M8 M10 M12 M13 M14 F14 M15 F15 M3/8 F3/8 M1/2 F1/2 M9/16 F9/16 M3/4 F3/4 D Hose Size 006 DN6 008 DN8 010 DN10 XXX Length (mm) 150-1500

Approval Holder:: Ka Shing Enterprises (H.K) Ltd

Company Name
Ka Shing Enterprises (H.K) Ltd
Address
Flat A, 3/F Waylee Industry Center 30-38 Tsuen King Circuit Tsuen Wan
Country
Hong Kong

View All Listings by this Company

WRAS Approval Number: #2203069

Range of stainless steel braided, PEX lined flexible hose assemblies with a variety of end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2203069
Size:: see model
Marking:: PESEN, WRAS, manufacture date (YYYY) on the ferrule
Installation Requirements:: R001 R008
Expiry date:: 31/03/2027
Model:: DN8 1/2F*3/8F

Approval Holder:: PESEN TEL ORGU SAN. VE TIC. LTD. STI.

Company Name
PESEN TEL ORGU SAN. VE TIC. LTD. STI.
Address
IKITELLI OSB DERSAN SAN SIT TRIOS B-120 BASAKSEHIR-ISTANBUL
Country
Turkey

View All Listings by this Company

WRAS Approval Number: #240202094

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240202094
Size:: See Models
Marking:: Kingfisher, Size, PN, WRAS and Date of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 28/02/2029
Model:: DN8 5052931462728 - M10 short male x 15mm compression - M10 Long male x 15mm compression 5052931462834 - M12 short male x 15mm compression 5052931462834 - M12 Long male x 15mm compression DN10 5052931462827 - 15mm compression x 3/8"F captive nut 5052931462636 (Length 300mm) - 15mm compression x 1/2"F captive nut 5052931462803 (Length 500mm) - 15mm compression x 1/2"F captive nut 5052931462704 (Length 900mm) - 15mm compression x 1/2"F captive nut 5052931462810 (Length 300mm) - 15mm compression x 3/4"F captive nut 5052931462858 (Length 500mm) - 15mm compression x 3/4"F captive nut 5052931462865 (Length 900mm) - 15mm compression x 3/4"F captive nut DN13 5052931462711 (Length 300mm) - 15mm compression x 1/2"F captive nut 5052931462797 (Length 500mm) - 15mm compression x 1/2"F captive nut 5052931462698 (Length 900mm) - 15mm compression x 1/2"F captive nut 5052931462643 (Length 300mm) - 22mm compression x 3/4"F captive nut 5052931462674 (Length 500mm) - 22mm compression x 3/4"F captive nut 5052931462681 (Length 900mm) - 22mm compression x 3/4"F captive nut GAC1977 - DN19 22mm compression x 3/4"F captive nut DN10 50052931462650 (Length 300mm) - 15mm isolating valve x 1/2"F captive nut 5052931462735 (Length 500mm) - 15mm isolating valve x 1/2"F captive nut 552931462759 (Length 300mm) - 15mm isolating valve x 3/4"F captive nut 5052931462773 (Length 500mm) - 15mm isolating valve x 3/4"F captive nut DN13 5052931462667 (Length 300mm) - 22mm isolating valve x 3/4"F captive nut 5052931462742 (Length 500mm) - 22mm isolating valve x 3/4"F captive nut DN8 - 15mm compression x 15mm compression 5052931462629 (Length 300mm) 5052931462841 (Length 500mm) 5052931462629 (Length 300mm)

Approval Holder:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square Paddington, London
Postcode
W2 6PX

View All Listings by this Company

WRAS Approval Number: #2307367

Range of Nickel plated brass manifolds with two, three or four outlets, for use with copper pipe (manufactured to EN1057). The products incorporate a screw down isolation valve at each port. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

Section:: 1950 Manifolds
Section Subtitle:: Metal.
WRAS Approval Number:: 2307367
Size:: ¾” BSP (F) x ¾” BSP (M) or 1” BSP (M) x 1” BSP (F).
Marking:: General Fittings on body or cap indice.
Installation Requirements:: R001 R120
Expiry date:: 31/07/2028
Model:: 12-05052 3/4X3/4-T2 12-05053 3/4X3/4-T3 12-05054 3/4X3/4-T4 12-100521”X3/4-T2 12-10053 1”X3/4-T3 12-10054 1”X3/4-T4

Approval Holder:: Multipipe Ltd

Company Name
Multipipe Ltd
Address
Unit 12 Great Hayes Business Park Lower Burnham Road Stow Maries
Postcode
CM3 6SQ
Country
Chelmsford

View All Listings by this Company
Manufacturer:: General Fittings S.p.A

Company Name
General Fittings S.p.A
Address
Via Golgi 73/75 25064 Gussago Brescia
Country
Italy
Phone
+39 0303739017

View All Listings by this Company

WRAS Approval Number: #241188007

Range of wall mounted, concealed, manually operated blending valves (brass bodies) incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure: 10.0 bar. Maximum operating pressure: 60oC.

Section:: 2000 Shower Valves
Section Subtitle:: Shower valve(s) with manual temperature control.
WRAS Approval Number:: 241188007
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1/2" BSP (F).
Marking:: Villeroy & Boch on operating member
Installation Requirements:: R001 R010 R040
Expiry date:: 30/11/2029
Model:: TVS103352000xx – Architectura, TVS104352000xx - O.novo, TVS106352110xx – Dawn, TVS106352113xx - Loop & Friends, TVS127004000xx – Conum, TVS112002000xx - Subway 3.0, TVS125002000xx - Architectura Square, TVS107004000xx – Liberty, TVS111004000xx – Antao, TVS122001000xx - Empora 2.0. The above are to be used with: TVS00035100000 - Universal Taps & Fittings Vi-Box Vi-Box universal concealed installation unit for single-lever. Where xx denotes the surface finish (which is a non-water contact part): 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite

Product Images

Approval Holder:: Villeroy & Boch AG

Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company