Directory Search Results

Print List

#2012076

Range of flow switches with brass bodies incorporating EPDM ‘O’-rings, acting as a leak detection system that actuates an integral spherical valve to shut off the water supply. The inlet incorporates a stainless steel strainer. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 30°C.

Section:
1719 Flow Activated Switches
WRAS Approval Number:
2012076
Size:
¾”, 1” & 1¼” BSP (M) inlet/outlet.
Marking:
‘SYR’ (Hans Sasserath GmbH & Co. KG logo) and SAFETECH on plastic cover.
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
SafeTech Connect 2422

Approval Holder:
Hans Sasserath GmbH
Company Name
Hans Sasserath GmbH
Address
Mühlenstrasse 62, D-41352 Korschenbroich
Country
Germany
Phone
+49 (0) 2161 - 6105 10
General Email
sasserath@syr.de

View All Listings by this Company
Manufacturer:
Hans Sasserath GmbH
Company Name
Hans Sasserath GmbH
Address
Mühlenstrasse 62, D-41352 Korschenbroich
Country
Germany
Phone
+49 (0) 2161 - 6105 10
General Email
sasserath@syr.de

View All Listings by this Company

Print This Approval


#2102701

Drain cock elbow incorporating a DZR brass body with EPDM ’O’-rings (ZELB250445 model) or NBR ‘O’-rings (ZELB250446 model added July 2022). Both models are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressures: ZELB250445 model - 10.0 Bar. ZELB250446 - 16.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, for above ground use only.
WRAS Approval Number:
2102701
Size:
See model.
Marking:
ZELB250445 model: RWC, CR and size on body. ZELB250446 model added July 2022: RWC, CR, size and BS2879 on body.
Installation Requirements:
R001 R511
Expiry date:
28/02/2026
Model:
ZELB250445: 22mm compression x ¾” BSP (M). Model added July 2022: ZELB250446 model: 28mm compression x 1” BSP (M).

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2101056

Range of pillar taps with brass bodies (chromium plated) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap(s).
WRAS Approval Number:
2101056
Size:
Stainless steel braided, PEX lined flexible hose assembly incorporating 3/8” BSP captive nut end connection.
Marking:
Hansgrohe on front of tap body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2026
Model:
Vernis 71583XXX Vernis 71592XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2012337

Range of pillar taps with brass bodies (various finishes) incorporating non-rising spindle headworks using either dome type or cross top operating members. Spout outlets incorporate plastic flow straighteners. The products are also supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap(s).
WRAS Approval Number:
2012337
Size:
See model
Marking:
PPI on rear of body.
Installation Requirements:
R001 R005
Expiry date:
31/12/2025
Model:
½” BSP (M) 902001H 902001F 902001F PVD ¾” BSP (M) 902002H 902002F 902002F PVD
Product Images

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#2106804

Self-closing basin tap assembly (chromium plated brass) incorporating spring loaded headwork and dome type operating members. The inlet incorporates a plastic flow restrictor and the spout outlet incorporates a plastic flow straightener. The product is supplied with a metal backnut. Maximum working pressure 10.0 bar. Maximum operating temperature 70ºC.

Section:
1820 Taps
Section Subtitle:
Self closing tap(s).
WRAS Approval Number:
2106804
Size:
½” BSP (M).
Marking:
PPI on rear of body
Installation Requirements:
R001 R006
Expiry date:
30/06/2026
Model:
M96123

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 98 of 802

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.