Instantor range of brass compression fittings for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312342

Size:

8mm, 10mm, 12mm, 15mm, 22mm & 28mm

Marking:

Instantor, size & EN1254-2 on nut. ‘S’ cast on body of tee piece.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Instantor range comprising of models: Straight Coupler 410077 8mm C x C 410088 10mm C x C 410099 12mm C x C 410001 15mm C x C 410002 22mm C x C 410003 28mm C x C Straight Coupler Adaptor 410087 10 x 8mm C x C 410017 15 x 8mm C x C 410098 12 x 10mm C x C 410018 15 x 10mm C x C 410019 15 12mm C x C 410021 22 x 15mm C x C 410022 22mm x 3/4" C x C 410032 28 x 22mm C x C Straight Coupler 411077 8mm x 1/4" C x M.I 411079 8mm x 3/8" C x M.I 411071 8mm x 1/2" C x M.I 411087 10mm x 1/4" C x M.I 411089 10mm x 3/8" C x M.I 411081 10mm x 1/2" C x M.I Straight Coupler 411019 15mm x 3/8" C x M.I 411001 15mm x 1/2" C x M.I 411012 15mm x 3/4" C x M.I 411021 22mm x 1/2" C x M.I 411002 22mm x 3/4" C x M.I 411023 22mm x 1" C x M.I 411032 28mm x 3/4" C x M.I 411003 28mm x 1" C x M.I Straight Coupler 412079 8mm x 3/8" C x F.I. 412087 10mm 1/4" C x F.I. 412081 10mm x 1/2" C x F.I. 412089 10mm x 3/8" C x F.I. 412091 12mm x 1/2" C x F.I. 412019 15mm x 3/8" C x F.I. 412001 15mm x 1/2" C x F.I. 412012 15mm x 3/4" C x F.I. 412021 22mm x 1/2" C x F.I. 412002 22mm x 3/4" C x F.I. 412023 22mm x 1" C x F.I. 412032 28mm x 3/4" C x F.I. 412003 28mm x 1" C x F.I. Elbow 415077 8mm C x C 415088 10mm C x C 415001 15mm C x C 415002 22mm C x C 415003 28mm C x C 415021 22mm x 15mm C x C Elbow 416087 10mm x 1/4" C x M.I. 416089 10mm x 3/8" C x M.I. 416081 10mm x 1/2" C x M.I. 416001 15mm x 1/2" C x M.I. 416012 15mm x 3/4" C x M.I. 416021 22mm x 1/2" C x M.I. 416002 22mmx 3/4" C x M.I. 416023 22mm x 1" C x M.I. 416032 28mm x 3/4" C x M.I. 416003 28mm x 1" C x M.I. Elbow 417001 15mm x 1/2" C x F.I. 417021 22mm x 1/2" C x F.I. 417002 22mm x 3/4" C x F.I. 417023 22mm x 1" C x F.I. 417003 28mm x 1" C x F.I. 417012 3/4" x 15mm F.I. x C Equal Tee's 418777 8mm C x C x C 418888 10mm C x C x C 418001 15mm C x C x C 418002 22mm C x C x C 418003 28mm C x C x C Reducing Tee's 418211 22 x 15 x 15mm C x C x C 418212 22 x 15 x 22mm C x C x C 418221 22 x 22 x 15mm C x C x C 418313 28 x 15 x28mm C x C x C 418331 28 x 28 x 15mm C x C x C 418322 28 x 22 x 22mm C x C x C 418323 28 x 22 x 28mm C x C x C 418332 28 x 28 x 22mm C x C x C Wallplate Elbow 419001 15mm x 1/2" C x F.I. 421001 15mm x 1/2" C x F.I. HD 421002 22mm x 3/4" C x F.I. HD 430001 15mm x 15mm x 1/2" 430 Tee C x C x F.I 430002 22mm x 22mm x 3/4" 430 Tee C x C x F.I Stop End Compression 451007 8mm 451008 10mm 451001 15mm 451002 22mm 451003 28mm Compression Nut 478008 10mm 478A 478009 12mm 478A 478001 15mm 478A 478002 22mm 478A 478003 28mm 478A Compression Ring 479007 8mm 478B 479008 10mm 478B 479001 15mm 478B 479002 22mm 478B 479003 28mm 478B

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Conex Works, Santry Avenue, Dublin

Postcode

D09 K160

Country

Ireland

Phone

353 1 842 6255

General Email

sales@sanbra.ie

View All Listings by this Company

JG Speedfit range of push-fit fittings and manifolds for use with Polybutylene Barrier Pipe (manufactured to BS EN 7291-2:2010 ) and PEX Barrier Pipe (manufactured to BS EN 7291-3:2010) and Copper Pipe (manufactured to BS EN1057:). Operating parameters: 12.5 bar@20°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312020

Note:

R008 to applies to models 15PWB and CM551516W

Size:

10mm – 22mm push-fit. 5/8” push-fit & ¾” push-fit. ½” & ¾” BSP.

Marking:

John Guest logo and size on body

Installation Requirements:

R001 R008

Expiry date:

31/12/2028

Model:

FEMALE COUPLER TAP CONNECTOR BSP THREAD PSE3210W 10mm x 1/2" BSP FEMALE PSE3201W 15mm x 1/2" BSP FEMALE PSE3203W 15mm x 3/4" BSP FEMALE PSE3202W 22mm x 3/4" BSP FEMALE STOP END PSE4610W 10mm PSE4615W 15mm PSE4622W 22mm PSE4628W 28mm 4 WAY MANIFOLD SFM512210E 22 x 10mm 4 PORT RAIL MANIFOLD SFM522210E 22mm x 10mm SFM522215E 22mm x 15mm BACK PLATE ELBOW 15PWB: 15mm x 1/2" BSP BULKHEAD ELBOW CM551516W: 15mm x 3/4" BSP CONVERSION CONNECTOR: NC471: ½” ID (Imperial) x 15mm Push-fit NC2324: ¾” ID (Imperial) x 22mm Push-fit

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

‘AquaGas M range’ of copper and brass press fit fittings with NBR ‘O’-rings for use with copper tube (manufactured to BS EN 1057). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312074

Size:

15 - 54mm. ½” - 2” BSP (M)/(F).

Marking:

PCC GmbH logo (PC), DVGW, size and date of manufacture (YY-MM) on fitting body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Press-Copper AquaGas M range: Brass (15-28mm) or Copper (35-54mm) fittings: 79010: Straight Male Adapter, 79020: Straight Female Adapter. Copper fittings: 79000: Straight Coupling, 79030: Straight Reducer, 79040: Slip Coupler, 79100: Equal Tee, 79110: Reduced Tee, 79120: Female Tee, 79200: Bend 90° ff, 79210: Bend 90° mf, 79230: Bend 45° ff, 79240: Bend 45° mf, 79410: End Cap, 79430: Male Reducer.

Approval Holder:

PCC GmbH

Company Name

PCC GmbH

Address

Dusseldorfer Strasse 15, D-71332 Wailblingen

Country

Germany

View All Listings by this Company

Range of blue epoxy coated ductile iron flanged dismantling fittings with EPDM sealing rings. Maximum working pressure 16.0 Bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

2312021

Size:

DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1100, DN1200, DN1400, DN1500, DN1600 & DN1800 Flanged

Marking:

Vortex Qingdao logo and size on plate on body. Size and PN on body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

WD8616B

Approval Holder:

Vortex Qingdao Pipe Fitting Co., Ltd.

Company Name

Vortex Qingdao Pipe Fitting Co., Ltd.

Address

No.4, chongxiang Road, Lancun Town, Jimo District, Qingdao, Shandong Province

Country

China

View All Listings by this Company

Range of pipe repair clamps incorporating EPDM double seals. The products are intended for use with stainless steel pipe manufactured to EN1124. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

2312067

Size:

See models

Marking:

Dalian logo and size on clamp body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

CR-XXX Where XXX denotes the size and can be replaced with any of the following: 50 = DN50, 65 = DN65, 80 = DN80, 100 = DN100, 150 = DN150, 200 = DN200, 250 = DN250, 300 = DN300, 350 = DN350, 400 = DN400, 500 = DN500, 600 = DN600, 700 = DN700, 800 = DN800.

Approval Holder:

Dalian Zhuhong Mechanical Co. Ltd.

Company Name

Dalian Zhuhong Mechanical Co. Ltd.

Address

Floor 1-4,No.366,Xiaoyanjia Building, Hongta Village,Yongzheng Street, Jinzhou District,Dalian City,Liaoning Province, CHINA

Country

China

View All Listings by this Company

Manufacturer:

Dalian Zhuhong Mechanical Co. Ltd.

Company Name

Dalian Zhuhong Mechanical Co. Ltd.

Address

Floor 1-4,No.366,Xiaoyanjia Building, Hongta Village,Yongzheng Street, Jinzhou District,Dalian City,Liaoning Province, CHINA

Country

China

View All Listings by this Company