Directory Search Results

Print List

#241002032

Range of concealed wall mounted thermostatic shower valves, (brass bodies – various finishes & strim sets). Incorporating either a ceramic disc headwork, two-way diverter or both (see models). The temperature is controlled independently via a thermostatic cartridge. The valves incorporate approved single check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 44.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002032
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Products are not supplied with shower hoses, handsets, riser rails or overhead shower outlets.
Size:
¾” BSP (F)
Marking:
SLION logo on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Dual control thermostatic valve without diverter SL0316(50), SL0316(51), SL0316(02), SL0316(01), SL0310(09), SL0310(11), SL0317(31), SL0316(00), SL0310(10), SL0310(08), SL0316(58), SL0316(59), SL0314(05) Dual control thermostatic valve with diverter SL0316(52), SL0317(25), SL0317(22), SL0317(30), SL0316(33), SL0311(09), SL0311(08), SL0316(23), SL0311(07), SL0311(06), SL0317(38), SL0317(37), SL0315(12 Three-control thermostatic valve with diverter SL0106(18), SL0105(22), SL0105(33), SL0105(07), SL0106(24), SL0106(26), SL0106(27), SL0105(05), SL0111(07), SL0106(28), SL0106(29), SL0106(30), SL0111(05) Three-control thermostatic valve without diverter SL0106(17), SL0106(16), SL0106(04), SL0106(02), SL0106(03), SL0106(37), SL0106(31), SL0106(05), SL0106(32), SL0106(33), SL0106(34), SL0106(35), SL0106(36)
Product Images

Manufacturer:
ZHEJIANG SLION FLUID CONTROL CO., LTD
Company Name
ZHEJIANG SLION FLUID CONTROL CO., LTD
Address
18 Jinbo Road, Bingang Industrial Zone Shamen Town, Yuhuan City, Zhejiang

View All Listings by this Company

Print This Approval


#240702704

Range of ‘901’ float operated equilibrium inlet valves incorporating brass bodies and float arms. Maximum working pressure - See Models Maximum operating temperature – Cold water use only.

Section:
2100 Valves
Section Subtitle:
Float operated, equilibrium, metal.
WRAS Approval Number:
240702704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
No float supplied.
Size:
1/2" to 6"
Marking:
Pegler England 901 on body
Installation Requirements:
R001 R280
Expiry date:
31/07/2029
Model:
520007 - ½” (M) BSP - 14 bar 520008 - ¾” (M) BSP - 14 bar 520009 - 1” (M) BSP - 14 bar 520010 - 1.1/4” (M) BSP – 10 bar 520011 - 1.1/2” (M) BSP – 10 bar 520012 - 2” (M) BSP – 10 bar 520300 - 2.1/2” (M) BSP – 10 bar 520305 - 3” (M) BSP – 10 bar 520310 - 4” (M) BSP – 10 bar 520315 - 6” (M) BSP – 10 bar
Product Images

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#240988017

Range of pilot operated flow control valves with (blue or red/brown) epoxy coated stainless steel bodies and EPDM ‘O’-rings. Auxiliary components include stainless steel tube with fittings, a strainer, spherical valves, needle valve and restriction orifice. Maximum working pressure 16.0 Bar Maximum operating temperature 65 °C.

Section:
2165 Valves
Section Subtitle:
Flow control, pilot operated control.
WRAS Approval Number:
240988017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Pressure sustaining function not verified by test.
Size:
DN40 up to DN1400 flanged inlet and outlet
Marking:
Cla-Val, flow arrow, DN and PN on body. Cla-Val, flow arrow, DN, PN and model number on data plate on flange.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
NG1E-50-01 Reduced port valve 50mm – 600mm NG1E-50-701 Reduced port valve 600mm – 1400mm 50-G1E-01 Full port valve 40mm – 400mm
Product Images

Approval Holder:
Cla-Val UK Ltd.
Company Name
Cla-Val UK Ltd.
Address
Dainton House 107 Goods Station Road Tunbridge Wells
Postcode
TN1 2DR
Country
United Kingdom
Phone
01892 514400
General Email
liam.kent@cla-val.co.uk

View All Listings by this Company
Manufacturer:
Cla-Val UK Ltd.
Company Name
Cla-Val UK Ltd.
Address
Dainton House 107 Goods Station Road Tunbridge Wells
Postcode
TN1 2DR
Country
United Kingdom
Phone
01892 514400
General Email
liam.kent@cla-val.co.uk

View All Listings by this Company

Print This Approval


#240702712

Range of non-return, swing gate valves with bronze, DZR brass or brass bodies and DZR brass, bronze or brass discs. Maximum working pressure 20.0 bar or 16.0 bar (please refer to model) Maximum operating temperature 85°C.

Section:
2188 Valves
Section Subtitle:
Non-return, swing gate, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should be made to `Backflow Prevention Devices`.
WRAS Approval Number:
240702712
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” to 2” BSPT (F), NPT (F) or BSPP (F).
Marking:
MV30-117C - Maplef & WRAS on nameplate, CC491K, Size, PN & flow arrow on body. MV30-1402 - Maplef & WRAS on nameplate, size, PN, flow arrow & CR on body MV30-1401 - Maplef & WRAS on nameplate, size, PN & flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
MV30-117C (Bronze body, Bronze disc, 20.0 bar). MV30-1402 (DZR brass body, DZR brass disc, 20.0 bar). MV30-1401 (Brass body, brass disc, 16.0 bar).

Approval Holder:
Maplef valves and Fittings Ltd
Company Name
Maplef valves and Fittings Ltd
Address
Suite 1488 1130 West Pender St Vancouver, BC
Postcode
V6E 4A4
Country
Canada
General Email
saad@maplefvalves.ca

View All Listings by this Company

Print This Approval


#240504719

Range of pressure relief valves with DZR brass bodies incorporating EPDM diaphragms. The valves are pre-set as follows: 311560, 312469, 312461ITH, 311461CTS,531661 CST models: 6.0 bar, 312471 CST model: 7.0 bar, 312020 CST model: 10.0 bar. Maximum operating temperature 99°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
240504719
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
Caleffi logo, size, CR and flow arrow cast on body. Pressure rating and date of manufacture (WW/YY) printed on body. Pressure rating on cap.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
311560: ¾” BSP (F) x ¾” BSP (F). 312469: 19.8mm OD x ½” BSP (F). 312020 CST: ½” BSP (M) x ½” BSP (F). 312461 ITH: 19.8mm manifold x Ø14mm Purpose Made Connection. 311461 CST: ½” BSP (F) x 15mm (compression). 312471 CST: 19.8mm OD x ½” BSP (F). 531661 CST: 1” BSP (F) x 1¼” BSP (F).
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#250604703

Range of pre-set pressure relief valves incorporating DZR brass bodies and an EPDM diaphragms and PTFE washers. The valve is fitted with hand operated rotating easing gear. Maximum working – see model. Maximum operating temperature 85°C

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
250604703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
SYR, size, DR and flow arrow on body. Size, Reliance logo, PREL 102 and pressure rating on cap.
Installation Requirements:
R001
Expiry date:
1/06/2030
Model:
PREL102014 1/2” FBSP x 1/2” FBSP 3.5 Bar PREL102008 1/2” FBSP x 1/2” FBSP 5.0 Bar PREL102001 1/2” FBSP x 1/2” FBSP 6.0 Bar PREL102025 1/2” FBSP x 1/2” FBSP 7.0 Bar PREL102004 1/2” FBSP x 1/2” FBSP 8.0 Bar PREL102040 1/2” MBSP x 1/2” FBSP 3.5 Bar PREL102041 1/2” MBSP x 1/2” FBSP 5.0 Bar PREL102042 1/2” MBSP x 1/2” FBSP 6.0 Bar PREL102043 1/2” MBSP x 1/2” FBSP 8.0 Bar PREL102009 1/2” MBSP x 15mm 3.5 Bar PREL102003 1/2” MBSP x 15mm 5.0 Bar PREL102005 1/2” MBSP x 15mm 6.0 Bar PREL102044 1/2” MBSP x 15mm 8.0 Bar PREL102045 3/4” FBSP x 3/4” FBSP 3.5 Bar PREL102046 3/4” FBSP x 3/4” FBSP 5.0 Bar PREL102031 3/4” FBSP x 3/4” FBSP 6.0 Bar PREL102047 3/4” FBSP x 3/4” FBSP 8.0 Bar PREL102048 3/4” MBSP x 3/4” FBSP 3.5 Bar PREL102118 3/4” MBSP x 3/4” FBSP 5.0 Bar PREL102018 3/4” MBSP x 3/4” FBSP 6.0 Bar PREL102024 3/4” MBSP x 3/4” FBSP 8.0 Bar PREL102020 3/4” MBSP x 22mm 3.5 Bar PREL102049 3/4” MBSP x 22mm 5.0 Bar PREL102027 3/4” MBSP x 22mm 6.0 Bar PREL102050 3/4” MBSP x 22mm 8.0 Bar PREL102023 3/4” FBSP x 3/4” FBSP 4.0 Bar PREL102110 1/2” MBSP x 1/2” MBSP 4.0 Bar PREL102111 1/2” MBSP x 15mm 4.0 Bar PREL102105 1/2” MBSP x 15mm 6.0 Bar

Approval Holder:
Reliance Worldwide Corporation
Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#240704024

Series of brass valves with EPDM o-ring isolation valves with M profile press crimped connections to be used with copper pipe EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
240704024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
JMING, size, DN, PN and batch number for the mould casted on body, Lever models additionally marked JMING, WRAS, pressure, temperature and on/off on operating member JMYG-PF027 JMING, WRAS, size, batch number for the mould casted on body, Screwdriver operated models & handle operated models: JMING, WRAS, size, arrow and batch number for the mould casted on body,
Installation Requirements:
R001
Expiry date:
1/08/2029
Model:
With lever handle: JMYG-PF001: 15mm, JMYG-PF002: 22mm, JMYG-PF003: 28mm, JMYG-PF004: 35mm, JMYG-PF005: 42mm, JMYG-PF006: 54mm. With lever handle and chrome plated body: JMYG-PF007: 15mm, JMYG-PF008: 22mm, JMYG-PF009: 28mm, JMYG-PF010: 35mm, JMYG-PF011: 42mm, JMYG-PF012: 54mm. With butterfly handle: JMYG-PF013: 15mm, JMYG-PF014: 22mm, JMYG-PF015: 28mm. With butterfly handle and chrome plated body: JMYG-PF016: 15mm, JMYG-PF017: 22mm, JMYG-PF018: 28mm. With screwdriver operating mechanism: JMYG-PF019: 15mm, JMYG-PF021: 22mm, JMYG-PF023: 15mm, JMYG-PF025: 22mm, JMYG-PF028: 15mm x ½”BSP(M). Screwdriver operated and chrome plated body: JMYG-PF020: 15mm, JMYG-PF022: 22mm, JMYG-PF024: 15mm, JMYG-PF026: 22mm. Screwdriver operated angled valve: JMYG-PF027: 15mm, JMYG-PF029: 15mm x ½”BSP(M). Handle operated angled valve: JMYG-PF030: 15mm x3/4”BSP(F). Handle operated valve: JMYG-PF031: 15mm x3/4”BSP(F).
Product Images

Approval Holder:
Ningbo Jiaming Metal Products Co. Ltd.
Company Name
Ningbo Jiaming Metal Products Co. Ltd.
Address
No.158 JinCi Road Hangzhou Wan New Zone Cixi City
Country
Zhejiang
Phone
+86-574-63575000

View All Listings by this Company
Manufacturer:
Ningbo Jiaming Metal Products Co. Ltd.
Company Name
Ningbo Jiaming Metal Products Co. Ltd.
Address
No.158 JinCi Road Hangzhou Wan New Zone Cixi City
Country
Zhejiang
Phone
+86-574-63575000

View All Listings by this Company

Print This Approval


#240904030

Range of spherical valves with nickel plated brass bodies, incorporating a chrome plated brass ball, PTFE seats with either lever, butterfly or T operating members. Maximum working pressure 20.0 bar. Maximum operating temperature 85˚C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
240904030
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
Tesla logo, size, CE and DN cast on body.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
GB/BVL112B Lever Ball Valve Lever ball valve EN331 FxF 1.1/2" blue handle GB/BVL112R Lever Ball Valve Lever ball valve EN331 FxF 1.1/2" red handle GB/BVL114B Lever Ball Valve Lever ball valve EN331 FxF 1.1/4" blue handle GB/BVL114R Lever Ball Valve Lever ball valve EN331 FxF 1.1/4" red handle GB/BVL12B Lever Ball Valve Lever ball valve EN331 FxF 1/2" blue handle GB/BVL12R Lever Ball Valve Lever ball valve EN331 FxF 1/2" red handle GB/BVL14B Lever Ball Valve Lever ball valve EN331 FxF 1/4" blue handle GB/BVL14R Lever Ball Valve Lever ball valve EN331 FxF 1/4" red handle GB/BVL1B Lever Ball Valve Lever ball valve EN331 FxF 1" blue handle GB/BVL1R Lever Ball Valve Lever ball valve EN331 FxF 1" red handle GB/BVL2B Lever Ball Valve Lever ball valve EN331 FxF 2" blue handle GB/BVL2R Lever Ball Valve Lever ball valve EN331 FxF 2" red handle GB/BVL34B Lever Ball Valve Lever ball valve EN331 FxF 3/4" blue handle GB/BVL34R Lever Ball Valve Lever ball valve EN331 FxF 3/4" red handle GB/BVL38B Lever Ball Valve Lever ball valve EN331 FxF 3/8" blue handle GB/BVL38R Lever Ball Valve Lever ball valve EN331 FxF 3/8" red handle GB/BVT12B T-Handle Ball Valve T-handle ball valve EN331 FxF 1/2" Blue Handle GB/BVT14B T-Handle Ball Valve Butterfly handle lever ball valve EN331 FxF 1/4" blue handle GB/BVT14R T-Handle Ball Valve T-handle ball valve EN331 FxF 1/4" red handle GB/BVT15B T-Handle Ball Valve T-handle ball valve EN331 CxC 15mm blue handle GB/BVT15R T-Handle Ball Valve T-handle ball valve EN331 CxC 15mm red handle GB/BVT1R T-Handle Ball Valve Butterfly handle lever ball valve EN331 FxF 1" red GB/BVT34R T-Handle Ball Valve T-handle ball valve EN331 FxF 3/4" red handle GB/BVT38B T-Handle Ball Valve T-handle ball valve EN331 FxF 3/8" Blue Handle GB/BVT38R T-Handle Ball Valve T-handle ball valve EN331 FxF 3/8" Red Handle GB/BVL15B Lever Ball Valve Lever ball valve EN331 CxC 15mm blue handle GB/BVL15R Lever Ball Valve Lever ball valve EN331 CxC 15mm red handle
Product Images

Approval Holder:
Tesla UK Ltd.
Company Name
Tesla UK Ltd.
Address
Unit 3B First Avenue, Minworth, Sutton Coldfield
Postcode
B76 1BA

View All Listings by this Company

Print This Approval


#240908004

STAD range of balancing valves with brass bodies, PTFE sliding washer and EPDM O-rings. Models are available with or without a drain port. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:
2348 Valves
Section Subtitle:
Balancing.
WRAS Approval Number:
240908004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” BSP (F x F) (DN10) – 2” BSP (F x F) (DN50).
Marking:
IMI, TA, pressure rating, size and CE marking cast on body. IMA , TA, STAD*, DN and logo located on handwheel.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
Global without drain: DN10 - 52851010, DN15 - 52851015, DN20 - 52861020, DN25 - 52851025, DN32 - 52851032, DN40 - 52851040, DN50 - 52851050. Global with drain ¾”: DN10 - 52851610, DN15 - 52851615, DN20 - 52851620, DN25 - 2552851625, DN32 - 52851632, DN40 - 52851640, DN50 - 52851650. Nordic without drain: DN10 - 52851110, DN15 - 52851115, DN20 - 52851120, DN25 - 52851125, DN32 - 52851132, DN40 - 52851140, DN50 - 52851150. Nordic with drain ½”: DN10 - 52851210, DN15 - 52851215, DN20 - 52851220, DN25 - 52851225, DN32 - 52851232, DN40 - 52851240 DN50 - 52851250.
Product Images

Approval Holder:
IMI international Sp. z.o.o.
Company Name
IMI international Sp. z.o.o.
Address
Olewin 50A, 32-300 Olkusz, Poland

View All Listings by this Company

Print This Approval


#240902701

Range of ultraviolet disinfection units with stainless-steel bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:
2411 Disinfection Equipment
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M) to 3” BSP (M). DN100 to DN300 flanged.
Marking:
VAN REMMEN, model and other technical information on label on body
Installation Requirements:
R001 R150 R170
Expiry date:
30/09/2029
Model:
V90, V100, V110, V120, V130, V140, V150, V160, V170, V180 & V190 - ½” BSP (M) to 3” BSP (M). V200, V220, V250 & V290 - DN100 to DN300 flanged.
Product Images

Approval Holder:
Van Remmen UV Techniek B.V.
Company Name
Van Remmen UV Techniek B.V.
Address
Hooglandweg 3, 8131 TE, Wijhe
Country
The Netherlands

View All Listings by this Company
Manufacturer:
Wycombe Water Ltd.
Company Name
Wycombe Water Ltd.
Address
6 Premus Coldharbour Way, Aylesbury HP19 8AP Aylesbury Bucks
Postcode
HP19 8AP
Country
United Kingdom
Phone
01480355446

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 96 of 125

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.