Range of Hyddro press fittings incorporating EPDM ‘O’-rings. For use with Hyddro (S-1-0509/10/11/12/17/13) PEX-AL-PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304382

Size:

16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).

Marking:

Hyddro by GFS and WRAS on fitting. Hyddro by GFS, WRAS, size and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

Straight: HYD-ST-0101 U (S1216) - 16mm HYD-ST-0102 U (S1418) - 18mm HYD-ST-0103 U (S1620) - 20mm HYD-ST-0104 U (S2025) - 25mm HYD-ST-0109 U (S2026) - 26mm HYD-ST-0105 U (S2632) - 32mm Reduced straight: HYD-RS-0202U (S20*16) 20x16mm HYD-RS-0203 U (S20*18) 20x18mm HYD-RS-0204 U (S25*16) 25x16mm HYD-RS-0205 U (S25*18) 25x18mm HYD-RS-0206 U (S25*20) 25x20mm HYD-RS-0223 U (S26*16) 26x16mm HYD-RS-0224 U (S26*18) 26x18mm HYD-RS-0225 U (S26*20) 26x20mm HYD-RS-0222 U (S32*16) 32x16mm HYD-RS-0226 U (S32*18) 32x18mm HYD-RS-0207 U (S32*20) 32x20mm HYD-RS-0208 U (S32*25) 32x25mm HYD-RS-0227 U (S32*26) 32x26mm. Male straight: HYD-MS-0301 U (S16*1/2"M) 16mmx1/2"Mr HYD-MS-0302 U (S16*3/4"M) 16mmx3/4"Mr HYD-MS-0303 U (S18*1/2"M) 18mmx1/2"Mr HYD-MS-0304 U (S18*3/4"M) 18mmx3/4"Mr HYD-MS-0305 U (S20*1/2"M) 20mmx1/2"Mr HYD-MS-0306 U (S20*3/4"M) 20mmx3/4"Mr HYD-MS-0307 U (S20*1"M) 20mmx1"M HYD-MS-0308 U (S25*1/2"M) 25mmx1/2"Mr HYD-MS-0309 U (S25*3/4"M) 25mmx3/4"Mr HYD-MS-0310 U (S25*1"M) 25mmx1"M HYD-MS-0326 U (S26*1/2"M) 26mmx1/2"Mr HYD-MS-0327 U (S26*3/4"M) 26mmx3/4"Mr HYD-MS-0328 U (S26*1"M) 26mmx1"M HYD-MS-0311 U (S32*1/2"M) 32mmx1/2"M HYD-MS-0312 U (S32*3/4"M) 32mmx3/4"M HYD-MS-0313 U (S32*1"M) 32mmx1"M HYD-MS-0314 U (S32*11/4"M) 32mmx11/4"M HYD-MS-0315 U (S32*11/2"M) 32mmx11/2"M Female straight: HYD-FS-0401 U (S16*1/2"F) 16mmx1/2"F HYD-FS-0402 U (S16*3/4"F) 16mmx3/4"F HYD-FS-0403 U (S16*1"F) 16mmx1"F HYD-FS-0404 U (S18*1/2"F) 18mmx1/2"F HYD-FS-0405 U (S18*3/4"F) 18mmx3/4"F HYD-FS-0407 U (S20*1/2"F) 20mmx1/2"F HYD-FS-0408 U (S20*3/4"F) 20mmx3/4"F HYD-FS-0409 U (S20*1"F) 20mmx1"F HYD-FS-0410 U (S25*1/2"F) 25mmx1/2"F HYD-FS-0411 U (S25*3/4"F) 25mmx3/4"F HYD-FS-0412 U (S25*1"F) 25mmx1"F HYD-FS-0422 U (S26*1/2"F) 26mmx1/2"F HYD-FS-0423 U (S26*3/4"F) 26mmx3/4"F HYD-FS-0424 U (S26*1"F) 26mmx1"F HYD-FS-0413 U (S32*1/2"F) 32mmx1/2"F HYD-FS-0414 U (S32*3/4"F) 32mmx3/4"F HYD-FS-0415 U (S32*1"F) 32mmx1"F HYD-FS-0416 U (S32*11/4"F) 32mmx11/4"F HYD-FS-0417 U (S32*11/2"F) 32mmx11/2"F. Elbow: HYD-EL-0501 U (L1216) 16mm HYD-EL-0502 U (L1418) 18mm HYD-EL-0503 U (L1620) 20mm HYD-EL-0504 U (L2025) 25mm HYD-EL-0509 U (L2026) 26mm HYD-EL-0505 U (L2632) 32mm. Male elbow: HYD-ME-0801 U (L16*1/2"M) 16mmx1/2"M HYD-ME-0802 U (L16*3/4"M) 16mmx3/4"M HYD-ME-0803 U (L18*1/2"M) 18mmx1/2"M HYD-ME-0804 U (L18*3/4"M) 18mmx3/4"M HYD-ME-0805 U (L20*1/2"M) 20mmx1/2"M HYD-ME-0806 U (L20*3/4"M) 20mmx3/4"M HYD-ME-0813 U (L20*1"M) 20mmx1"M HYD-ME-0807 U (L25*1/2"M) 25mmx1/2"M HYD-ME-0808 U (L25*3/4"M) 25mmx3/4"M HYD-ME-0809 U (L25*1"M) 25mmx1"M HYD-ME-0815 U (L26*1/2"M) 26mmx1/2"M HYD-ME-0816 U (L26*3/4"M) 26mmx3/4"M HYD-ME-0817 U (L26*1"M) 26mmx1"M HYD-ME-0810 U (L32*1/2"M) 32mmx1/2"M HYD-ME-0811 U (L32*3/4"M) 32mmx3/4"M HYD-ME-0812 U (L32*1"M) 32mmx1"M HYD-ME-0814 U (L32*1 1/4"M) 32mmx11/4"M Female elbow: HYD-FE-0901 U (L16*1/2"F) 16mmx1/2"F HYD-FE-0902 U (L16*3/4"F) 16mmx3/4"F HYD-FE-0903 U (L18*1/2"F) 18mmx1/2"F HYD-FE-0904 U (L18*3/4"F) 18mmx3/4"F HYD-FE-0905 U (L20*1/2"F) 20mmx1/2"F HYD-FE-0906 U (L20*3/4"F) 20mmx3/4"F HYD-FE-0913 U (L20*1"F) 20mmx1"F HYD-FE-0907 U (L25*1/2"F) 25mmx1/2"F HYD-FE-0908 U (L25*3/4"F) 25mmx3/4"F HYD-FE-0909 U (L25*1"F) 25mmx1"F HYD-FE-0914 U (L26*1/2"F) 26mmx1/2"F HYD-FE-0915 U (L26*3/4"F) 26mmx3/4"F HYD-FE-0916 U (L26*1"F) 26mmx1"F HYD-FE-0910 U (L32*1/2"F) 32mmx1/2"F HYD-FE-0911 U (L32*3/4"F) 32mmx3/4"F HYD-FE-0912 U (L32*1"F) 32mmx1"F HYD-FE-0917 U (L32*1 1/4"F) 32mmx11/4"F Wall plated elbow: HYD-WE-1001 U (L16*1/2"F(A)) 16mmx1/2"F HYD-WE-1002 U (L16*3/4"F(A)) 16mmx3/4"F HYD-WE-1003 U (L18*1/2"F(A)) 18mmx1/2"F HYD-WE-1004 U (L20*1/2"F(A)) 20mmx1/2"F HYD-WE-1006 U (L20*3/4"F(A)) 20mmx3/4"F. Tee: HYD-TE-1101 U (T1216) 16mm HYD-TE-1102 U (T1418) 18mm HYD-TE-1103 U (T1620) 20mm HYD-TE-1104 U (T2025) 25mm HYD-TE-1109 U (T2026) 26mm HYD-TE-1105 U (T2632) 32mm. Reduced tee: HYD-RT-1202 U (T16*20*16) 16x20x16mm HYD-RT-1203 U (T16*25*16) 16x25x16 mm HYD-RT-1255 U (T16*26*16) 16x26x16mm HYD-RT-1204 U (T18*16*18) 18x16x18mm HYD-RT-1205 U (T18*20*18) 18x20x18mm HYD-RT-1206 U (T18*25*18) 18x25x18mm HYD-RT-1256 U (T18*26*18) 18x26x18mm HYD-RT-1207 U (T20*16*20) 20x16x20mm HYD-RT-1208 U (T20*18*20) 20x18x20mm HYD-RT-1209 U (T20*25*20) 20x25x20mm HYD-RT-1211 U (T25*16*25) 25x16x25mm HYD-RT-1259 U (T25*16*16) 25x16x16mm HYD-RT-1260 U (T26*16*16) 26x16x16mm HYD-RT-1212 U (T25*18*25) 25x18x25mm HYD-RT-1213 U (T25*20*25) 25x20x25mm HYD-RT-1214 U (T25*32*25) 25x32x25mm HYD-RT-1240 U (T20*26*20) 20x26x20mm HYD-RT-1241 U (T26*16*26) 26x16x26mm HYD-RT-1242 U (T26*18*26) 26x18x26mm HYD-RT-1243 U (T26*20*26) 26x20x26mm HYD-RT-1244 U (T26*32*26) 26x32x26mm HYD-RT-1215 U (T32*16*32) 32x16x32mm HYD-RT-1216 U (T32*18*32) 32x18x32mm HYD-RT-1217 U (T32*20*32) 32x20x32mm HYD-RT-1263 U (T32*25*32) 32x25x32mm HYD-RT-1225 U (T25*16*20) 25x16x20mm HYD-RT-1226 U (T32*20*25) 32x20x25mm HYD-RT-1246 U (T26*16*20) 26x16x20mm HYD-RT-1247 U (T32*20*25) 32x20x26mm HYD-RT-1218 U (T20*16*16) 20x16x16mm HYD-RT-1219 U (T20*20*16) 20x20x16mm HYD-RT-1220 U (T25*25*18) 25x25x18mm HYD-RT-1221 U (T25*25*20) 25x25x20mm HYD-RT-1222 U (T25*18*18) 25x18x18mm HYD-RT-1223 U (T25*20*20) 25x20x20mm HYD-RT-1224 U (T25*16*20) 25x16x20mm HYD-RT-1227 U (T32*20*25) 32x20x25mm HYD-RT-1261 U (T26*26*16) 26x26x16mm HYD-RT-1248 U (T26*26*18) 26x26x18mm HYD-RT-1249 U (T26*26*20) 26x26x20mm HYD-RT-1250 U (T26*18*18) 26x18x18mm HYD-RT-1251 U (T26*20*20) 26x20x20mm HYD-RT-1252 U (T26*20*16) 26x20x16mm HYD-RT-1253 U (T32*20*26) 32x20x26mm HYD-RT-1254 U (T32*32*16) 32x32x16mm HYD-RT-1264 U (T32*32*20) 32x32x20mm HYD-RT-1257 U (T32*32*26) 32x32x26mm HYD-RT-1262 U (T32*25*25) 32x25x25mm HYD-RT-1258 U (T32*26*26) 32x26x26mm HYD-RT-1245 U (T32*26*32) 32x26x32mm. Male tee: HYD-MT-2801 U (T16*1/2"M*16) 16mmx1/2"Mx16mm HYD-MT-2802 U (T16*3/4"M*16) 16mmx3/4"Mx16mm HYD-MT-2803 U (T20*1/2"M*20) 20mmx1/2"Mx20mm HYD-MT-2804 U (T20*3/4"M*20) 20mmx3/4"Mx20mm. Female tee: HYD-FT-1301 U (T16*1/2"F*16) 16mmx1/2"Fx16mm HYD-FT-1302 U (T16*3/4"F*16) 16mmx3/4"Fx16mm HYD-FT-1303 U (T18*1/2"F*18) 18mmx1/2"Fx18mm HYD-FT-1304 U (T18*3/4"F*18) 18mmx3/4"Fx18mm HYD-FT-1305 U (T20*1/2"F*20) 20mmx1/2"Fx20mm HYD-FT-1306 U (T20*3/4"F*20) 20mmx3/4"Fx20mm HYD-FT-1307 U (T20*1"F*20) 20mmx1"Fx20mm HYD-FT-1308 U (T25*1/2"F*25) 25mmx1/2"Fx25mm HYD-FT-1309 U (T25*3/4"F*25) 25mmx3/4"Fx25mm HYD-FT-1310 U (T25*1"F*25) 25mmx1"Fx25mm HYD-FT-1329 U (T26*1/2"F*26) 26mmx1/2"Fx26mm HYD-FT-1330 U (T26*3/4"F*26) 26mmx3/4"Fx26mm HYD-FT-1331 U (T26*1"F*26) 26mmx1"Fx26mm HYD-FT-1311 U (T32*1/2"F*32) 32mmx1/2"Fx32mm HYD-FT-1312 U (T32*3/4"F*32) 32mmx3/4"Fx32mm HYD-FT-1313 U (T32*1"F*32) 32mmx1"Fx32mm HYD-FT-1314 U (T32*11/4"F*32) 32mmx11/4"Fx32mm Cap: HYD-CP-2601 U (D1216) 16mm HYD-CP-2602 U (D1418) 18mm HYD-CP-2603 U (D1620) 20mm HYD-CP-2604 U (D2025) 25mm HYD-CP-2606 U (D2026) 26mm HYD-CP-2605 U (D2632) 32mm. Female union: YD-FU-2901 U (H16*1/2F) 16mmx1/2"F HYD-FU-2902 U (H16*3/4F) 16mmx3/4"F HYD-FU-2903 U (H20*1/2F) 20mmx1/2"F HYD-FU-2904 U (H20*3/4F) 20mmx3/4"F HYD-FU-2907 U (H25*1/2F) 25mmx1/2"F HYD-FU-2905 U (H25*3/4F) 25mmx3/4"F HYD-FU-2908 U (H25*1F) 25mmx1"F HYD-FU-2909 U (H26*1/2F) 26mmx1/2"F HYD-FU-2910 U (H26*3/4F) 26mmx3/4"F HYD-FU-2911 U (H26*1F) 26mmx1"F HYD-FU-2906 U (H32*1F) 32mmx1"F. Pipe: HYD-PXAX-1620 (PEXALPEX pipe) 16x2.0mm, HYD-PXAX-1820 (PEXALPEX pipe) 18x2.0mm, HYD-PXAX-2020 (PEXALPEX pipe) 20x2.0mm, HYD-PXAX-2525 (PEXALPEX pipe) 25x2.5mm, HYD-PXAX-2630 (PEXALPEX pipe) 26x3.0mm, HYD-PXAX-3230 (PEXALPEX pipe) 32x3.0mm.

Approval Holder:

Merchant Supplies Distribution Ltd

Company Name

Merchant Supplies Distribution Ltd

Address

Unit 2 Merlin Centre Acrewood Way St. Albans

Postcode

AL4 OJY

Phone

0203 915 2557

General Email

murat@gfsflex.com

View All Listings by this Company

Range of compression fittings with brass, chrome plated brass bodies. COM RANGE OF COM For use with copper pipe (EN 1057) Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

8MM – 54MM & ¼” – 2”

Marking:

Lawton & size on compression nut.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Bent Tap Connector Compression COMBTC0151/2 – 15mm x ½” Coupling Compression Chrome COMCP015CP – 15mm COMCP022CP – 22mm COMCP028CP – 28mm COMCP035CP – 35mm COMCP042CP – 42mm COMCP054CP – 54mm Coupling Compression COMCP008 – 08mm COMCP010 – 10mm COMCP015 – 15mm COMCP022 – 22mm COMCP028 – 28mm COMCP035 – 35mm COMCP042 – 42mm COMCP054 – 54mm Reducer Coupler COMCP01008 – 10mm x 08mm COMCP01508 – 15mm x 08mm COMCP01510 – 15mm x 10mm COMCP01512 – 15mm x 12mm COMCP02215 – 22mm x 15mm COMCP02815 – 28mm x 15mm COMCP02822 – 28mm x 22mm COMCP03522 – 35mm x 22mm COMCP03528 – 35mm x 28mm 90 Degree Elbow Compression COMEL008 – 08mm COMEL010 – 10mm COMEL015 – 15mm COMEL022 – 22mm COMEL028 – 28mm COMEL035 – 35mm COMEL042 – 42mm COMEL054 – 54mm 45 Degree Elbow Compression COMEL01545 – 15mm COMEL02245 – 22mm COMEL02845 – 28mm 90 Degree Elbow Compression Chrome COMEL015CP – 15mm COMEL022CP – 22mm COMEL028CP – 28mm COMEL035CP – 35mm COMEL042CP – 42mm COMEL054CP – 54mm Equal Tee Compression COMTE008 – 08mm COMTE010 – 10mm COMTE015 – 15mm COMTE022 – 22mm COMTE028 – 28mm COMTE035 – 35mm COMTE042 – 42mm COMTE054 – 54mm Equal Tee Compression Chrome COMTE015CP – 15mm COMTE022CP – 22mm COMTE028CP – 28mm COMTE035CP – 35mm COMTE042CP – 42mm COMTE054CP – 54mm Cross Tee Compression COMCR015 – 15mm COMCR022 – 22mm COMCR028 – 28mm Male Iron Coupling Compression COMCPMI0081/4 – 08mm x ¼” COMCPMI0101/4 – 10mm x ¼” COMCPMI0103/8 – 10mm x 3/8” COMCPMI0151/4 – 15mm x ¼” COMCPMI0153/8 – 15mm x 3/8” COMCPMI0151/2 – 15mm x ½” COMCPMI0153/4 – 15mm x ¾” COMCPMI0221/2 – 22mm x ½” COMCPMI0223/4 – 22mm x ¾” COMCPMI0221 – 22mm x 1 “ COMCPMI0283/4 – 28mm x ¾” COMCPMI0281 – 28mm x 1” COMCPMI03511/4 – 35mm x 1 ¼” COMCPMI04211/2 – 42mm x 1 ½” COMCPMI0542 – 54mm x 2” Male Iron Coupling Chrome Compression COMCPMI0151/2CP – 15mm x ½” COMCPMI0223/4CP – 22mm x ¾” Female Iron Coupling Compression COMCPFI0101/4 – 10mm x ¼” COMCPFI0151/4 – 15mm x ¼” COMCPFI051/2 – 15mm x ½” COMCPFI0153/4 – 15mm x ¾” COMCPFI0221/2 – 22mm x ½” COMCPFI0223/4 – 22mm x ¾” COMCPFI0221 – 22mm x 1 “ COMCPFI0281 – 28mm x 1” COMCPFI03511/4 – 35mm x 1 ¼” COMCPFI04211/2 – 42mm x 1 ½” COMCPFI0542 – 54mm x 2” Female Iron Coupling Chrome Compression COMCPFI0151/2CP – 15mm x ½” COMCPFI0223/4CP – 22mm x ¾” Female Iron Elbow Chrome Compression COMELFI0151/2CP – 15mm x ½” COMELFI0223/4CP – 22mm ¾” COMELFI0221CP – 22mm x 1” Male Iron Elbow Compression COMELMI0151/2 – 15mm x ½” COMELMI0153/4 – 15mm x ¾” COMELMI0223/4 – 22mm x ¾” COMELMI0281 – 28mm x 1” COMELMI03511/4 – 35mm x 1 ¼” Female Iron Elbow Compression COMELFI0151/2 – 15mm x ½” COMELFI0153/4 – 15mm x ¾” COMELFI0221/2 – 22mm x ½” COMELFI0223/4 – 22mm x ¾” COMELFI0221 – 22mm 1 “ COMELFI0281 – 28mm x 1” COMELFI03511/4 – 35mm x 1 ¼” COMELFI04211/2 – 42mm x 1 ½” COMELFI0542 – 54mm x 2” Male Iron Elbow Chrome Compression COMELMI0151/2CP – 15mm x ½” COMELMI0223/4CP – 22mm x ¾” Wallplate Elbow Compression COMELWL0151/2 – 15mm x ½” COMELWL0223/4 – 22mm x ¾” Wallplate Elbow Chrome Compression COMELWL0151/2CP – 15mm x ½” Male Iron Coupler Taper Thread COMTTCPMI0151/2 – 15mm x ½” COMTTCPMI0223/4 – 22mm x ¾” COMTTCPMI0281 – 28mm x 1” Male Coupler Ext Taper Thread COMETTCPMI0223/4 – 22mm x ¾” Crossover Compression COMC022 – 22mm End Cap Compression COMEC008 – 08mm COMEC010 – 10mm COMEC015 – 15mm COMEC022 – 22mm COMEC028 – 28mm COMEC035 – 35mm COMEC042 – 42mm COMEC054 – 54mm End Cap Compression Chrome Plated COMEC015CP – 15mm COMEC022CP – 22mm COMEC028CP – 28mm COMEC035CP – 35mm COMEC042CP – 42mm COMEC054CP – 54mm Red Tee Compression COMTE0151522 – 15mm x 15mm x 22mm COMTE0221515 – 22mm x 15mm x 15mm COMTE0221522 – 22mm x 15mm x 22mm COMTE0222215 – 22mm x 22mm x 15mm COMTE0281528 – 28mm x 15mm x 28mm COMTE0282228 – 28mm x 22mm x 28mm COMTE0282815 – 28mm x 28mm x 15mm COMTE0282822 – 28mm x 28mm x 22mm Female Tee Compression COMTEFI015151/2 – 15mm x 15mm x ½” COMTEFI022221/2 – 22mm x 22mm x ½” COMTEFI022223/4 – 22mm x 22mm x ¾” COMTEFI028281 – 28mm x 28mm x 1” Red Tee Chrome Compression COMTE0151522CP – 15mm x 15mm x 22mm COMTE0221515CP – 22mm x 15mm x 15mm COMTE0222215CP – 22mm x 22mm x 15mm COMTE0222228CP – 22mm x 22mm x 28mm Reducing Sets Compression COMRS0108 – 10mm x 08mm COMRS0158 – 15mm x 08mm COMRS01510 – 15mm x 10mm COMRS02215 – 22mm x 15mm COMRS02822 – 28mm x 22mm COMRS03515 – 35mm x 15mm COMRS03522 – 35mm x 22mm COMRS03528 – 35mm x 28mm COMRS04215 – 42mm x 15mm COMRS04222 – 42mm x 22mm COMRS04228 – 42mm x 28mm COMRS04235 – 42mm x 35mm COMRS05422 – 54mm x 22mm COMRS05428 – 54mm x 28mm COMRS05435 – 54mm x 35mm COMRS05442 – 54mm x 42mm Tank Connector Compression COMTC015 – 15mm COMTC022 – 22mm COMTC028 – 28mm COMTC035 – 35mm COMTC042 – 42mm COMTC054 – 54mm Repair Coupling Compression COMRCP015 – 15mm COMRCP022 – 22mm Straight Tap Connect Compression COMSTC0151/2 – 15mm x ½” COMSTC0153/4 – 15mm x ¾” Red Elbow Compression COMREL02215 – 22mm x 15mm

Approval Holder:

Lawton Tube Company Limited.

Company Name

Lawton Tube Company Limited.

Address

Torrington Avenue Tile Hill Coventry

Postcode

CV4 9AB

View All Listings by this Company

Range of brass press fittings for use with copper pipe (manufactured to EN1057:2006 and +A1:2010 Seamless round copper tube, R250 half hard). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250804708

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Flowflex logo and size on body.

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

Male Adaptor: 572210 - 15X1/2B 572211 - 22X3/4B 572212 - 28X1B 572213 - 35X1.1/4B 572214 - 42X1.1/2B 572215 - 54X2B Female Adaptor: 572216 - 15X1/2B 572217 - 22X3/4B 572218 - 28X1B 572219 - 35X1.1/4B 572220 - 42X1.1/2B 572221 - 54X2B Wallplate Elbow: 572222 - 15x½B.

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

‘AF’ range of compression fittings with brass or chrome plated brass bodies for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum working temperature 85˚C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2204110

Size:

see model

Marking:

Plumb Bliss logo (PB), Size & month/year of manufacture on fitting body

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

10.1272 Plumb Bliss Compression Coupler Male 15mm x 1/2" 10.1273 Plumb Bliss Compression Coupler Male 15mm x 3/4" 10.1274 Plumb Bliss Compression Coupler Male 22mm x 1/2" 10.1275 Plumb Bliss Compression Coupler Male 22mm x 3/4" 10.1276 Plumb Bliss Compression Coupler Female 15mm x 1/2" 10.1277 Plumb Bliss Compression Coupler Male 15mm x 3/4" 10.1278 Plumb Bliss Compression Coupler Male 22mm x 1/2" 10.1279 Plumb Bliss Compression Coupler Male 22mm x 3/4" 10.1280 Plumb Bliss Brass Compression Tee 15mm x 15mm x 1/2" 10.1281 Plumb Bliss Wall Plate Compression Elbow 15mm x 1/2"

Approval Holder:

Bliss UK Group Ltd

Company Name

Bliss UK Group Ltd

Address

Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire

Postcode

MK43 8TS

Country

United Kingdom

Phone

01234 860230

General Email

accounts@blissukgroup.co.uk

View All Listings by this Company

Range of WC dual flush drop valves with an ABS body and silicon seal. The valves are operated via a push button assembly for either full or reduced flush and incorporate an internal adjustable height overflow. Cold water use only. Open outlet use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250804704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1 ½” and 2” BSP (M) outlet.

Marking:

Macdee Wirquin and model on body.

Installation Requirements:

R001 R556 R571

Expiry date:

31/08/2030

Model:

Afv50200 Afv50100 Afv50400 Dva0100

Approval Holder:

Wirquin Ltd

Company Name

Wirquin Ltd

Address

Unit 3 Alpha Court Thorne Doncaster

Postcode

DN8 5TZ

Country

United Kingdom

Phone

01302 312252

General Email

mick.kirby@wirquin.co.uk

View All Listings by this Company

Range of WC dual flush drop valves with ABS bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2311107

Size:

2” BSP (M)

Marking:

Plumb Bliss, logo & company website on bottom. WRAS & technical data on side.

Installation Requirements:

R001 R571 R580 R581

Expiry date:

30/11/2028

Model:

10.1260

Approval Holder:

Bliss UK Group Ltd

Company Name

Bliss UK Group Ltd

Address

Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire

Postcode

MK43 8TS

Country

United Kingdom

Phone

01234 860230

General Email

accounts@blissukgroup.co.uk

View All Listings by this Company

Range of urinal autosyphons with plastic body and supplied with plastic backnuts.

Section:

1307 Flushing Mechanisms

Section Subtitle:

Urinals.

WRAS Approval Number:

250801701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

B.B.S Auto Syphon, BS 1876 tested & Masefield Beta Ltd. on outer body

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

BBS Auto Syphon range consisting of; Size 1 - 4.5 litre (1 Gallon): 5½’’ X 1” BSP outlet. 5½’’ X 1¼” BSP outlet. Size 2 - 9 litre (2 Gallon): 6¼’’ X 1” BSP outlet. 6¼’’ X 1¼” BSP outlet. Size 3 - 13.5 litre (3 Gallon): 7½’’ X 1” BSP outlet. 7½’’ X 1¼” BSP outlet. Size 4 - 18 litre (4 Gallon): 8¼’’ X 1” BSP outlet. 8¼’’ X 1¼” BSP outlet. Size 5 - 22.5 litre (5 gallon): 9¼’’ X 1” BSP outlet. 9¼’’ X 1¼” BSP outlet.

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Range of under counter electric instantaneous water heaters with stainless steel tank and heating element. Open outlet use only. Maximum operating temperature 98°C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

250604712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

DAOMENG logo printed on front panel. DAOMENG logo; Pressure, Capacity, Model No and product info on data label.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

DM001, 241450, S2, S5.

Approval Holder:

GUANGDONG DM INTELLIGENT TECHNOLOGY CO.LTD

Company Name

GUANGDONG DM INTELLIGENT TECHNOLOGY CO.LTD

Address

17, B Building He Sui Industrial Avenue Dongheping Village Dongfeng Town Zhongshan City. Guangdong Province.

Country

China

Phone

18676009191

General Email

18666151668@163.com

View All Listings by this Company

Qmpress Instaboil Range of under counter electric instantaneous water heaters with stainless steel tank and heating element. Open outlet use only. Maximum operating temperature 98°C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

250604718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

QMPRESS logo printed on front panel. logo; Pressure, Capacity, Model No, WRAS and product info on data label.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Qmpress Instaboil 4in1 Boiler Water Heater Tanks.

Approval Holder:

QMPRESS LTD

Company Name

QMPRESS LTD

Address

Qmpress Ltd Cools, Headford, Killarney

Country

Ireland

View All Listings by this Company

Range of SSM-AQUO ultrasonic water meters with brass bodies, the inlets incorporate a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4” BSP (M) 7/8” BSP (M) 1” BSP (M) 1-1/4” BSP (M) 1-1/2” BSP (M) 2” BSP (M)

Marking:

Pietro Fiorentini logo moulded on cap. Pietro Fiorentini logo, pressure, flow, year of manufacture (YYYY) and other technical information printed on meter face. Flow arrow and DN moulded on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

SSM-AQUO DN15 - DN40

Approval Holder:

Pietro Fiorentini S.p.A.

Company Name

Pietro Fiorentini S.p.A.

Address

Via E. Fermi, n. 8/10-36057 Arcugnano (VI).

Country

Italy

General Email

mario.petti@fiorentini.com

View All Listings by this Company