Range of screw down valves with brass or DZR brass bodies, brass or DZR brass bonnets, EPDM washers and PTFE seats. Compression connection to be used with copper pipe manufactured to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

2210365

Size:

15, 20, 22, & 28 mm compression

Marking:

PFP, date of manufacture (MM/YY), EN1213, size and flow arrow stamped on body; for DZR body models, with CR mark on body

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

10145105 15MM BRASS STOPCOCK CXC 10145118 22MM BRASS STOPCOCK CXC 10145131 28MM BRASS STOPCOCK CXC 10145196 15MM BRASS STOPCOCK CXC DZR 10145209 22MM BRASS STOPCOCK CXC DZR 10145482 15MM X 20MM BRASS STOPCOCK CXC 10145521 20MM X 20MM BRASS STOPCOCK CXC

Approval Holder:

Primaflow F & P

Company Name

Primaflow F & P

Address

Votec House, Hambridge Lane, Newbury

Postcode

RG14 5TN

Country

United Kingdom

View All Listings by this Company

'EBONITA AL'. Factory applied, blue coloured hard rubber coating. Apply adhesives and coating in accordance with manufacturer's Technical Data Sheet dated 1st September 2022. Cure for 8 hours@140°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2210520

Expiry date:

31/10/2027

Approval Holder:

J.M. LUAN, S.L.

Company Name

J.M. LUAN, S.L.

Address

Barrio La Sota, s/n, 48190 SOPUERTA (VIZCAYA)

Country

Spain

View All Listings by this Company

‘R-4401, E-44131, E-4413, E-4414, E-4420, E440001, E441001, E440002, E441002, E-5402, E-5403, E-5404, E540001. E541001, E540002, E540003, E541003 & E440007’. Factory applied, grey-blue coloured enamel coatings. Apply as per manufacturer’s instructions ‘issue 02/2016’ dated 05.10.2016. Cure for 6 minutes@840°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2211529

Expiry date:

30/11/2027

Approval Holder:

EMO FRITE d.o.o

Company Name

EMO FRITE d.o.o

Address

Mariborska 86, 3000 Celje, Slovenia

View All Listings by this Company

'EBYK' Georgios Peftitselis S.A. Enamel Coating'. Factory applied, blue coloured enamel coating. Apply as per manufacturer's data sheet 'MS1555A' dated 12-10-18. Cure for 14 minutes@840°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2212522

Expiry date:

31/12/2027

Approval Holder:

'EBYK' Georgios Peftitselis S.A.

Company Name

'EBYK' Georgios Peftitselis S.A.

Address

Anghialos Thessaloniki, 57011 Gefyra Thessaloniki

Country

Greece

View All Listings by this Company

'Welmortar-III'. Factory applied, grey coloured cement mortar. Mix cement, sand and water in a mass ratio of 2:3:0.85. Apply as per manufacturer's Standard Operating Procedure 'WDIPL/QA/WI/14A', revision '0', dated '01.10.2021'. Cure for 21 days at 30°C & 70% humidity. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2212530

Expiry date:

31/12/2027

Approval Holder:

Welspun DI Pipes Limited

Company Name

Welspun DI Pipes Limited

Address

Survey No. 615-619, 632-634 & 650, Welspun City, Versamedi Village, Taluka Anjar, Kutch Anjar, Kachchh, Gujarat, 370110

Country

India

View All Listings by this Company