Directory Search Results

Print List

#240904028

Range of R-154 stainless steel pressed collars incorporating stainless steel bodies (304L or 316L) and are only to be used with stainless steel pipe. Maximum working pressure for sizes up to DN150 (FCM models) or DN125 (FCI models) is 25.0 bar. Maximum working pressure for size DN200 (FCM models) or DN150 and DN200 (FCI models) is 16.0 bar. Maximum operating temperature 99°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
240904028
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN 40 to DN 200.
Marking:
Nords, batch ID, size and material grade inkjet on collar.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
FCM0604420DHS. FCM0404420DHS. FCM0605420DHS. FCM0405420DHS. FCM0606920DHS. FCM0406920DHS. FCM0608420DHS. FCM0408420DHS. FCM0610630SPE. FCM0410630SPE. FCM0613130DHS. FCM0413130DHS. FCM0615630SPE. FCM0415630SPE. FCI0604820DHS. FCI0404820DHS. FCI0606020DHS. FCI0406020DHS. FCI0607620DHS. FCI0407620DHS. FCI0608820DHS. FCI0408820DHS. FCI0611430SPE. FCI0411430SPE. FCI0613930DHS. FCI0413930DHS. FCM0620630DHS. FCM0420630DHS. FCI0616826DHS. FCI0416826DHS. FCI0621930DHS. FCI0421930DHS.
Product Images

Approval Holder:
Nords International AB
Company Name
Nords International AB
Address
Prostårdsvägen 2 Molkom
Postcode
SE-65560
Country
Sweden
General Email
ralph.abraham@nordsinternational.com

View All Listings by this Company
Manufacturer:
Nords International AB
Company Name
Nords International AB
Address
Prostårdsvägen 2 Molkom
Postcode
SE-65560
Country
Sweden
General Email
ralph.abraham@nordsinternational.com

View All Listings by this Company

Print This Approval


#240704704

Range of wall mounted gas fired condensing instantaneous water heaters. Maximum working pressure 10.0bar. Maximum operating temperature 85°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
240704704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP(M) for 10-12L & 14~17L/min (Flow rate) ¾” BSP(M) for 22~26L/min (Flow rate)
Marking:
Company Logo Vanward, model, pressure, tempeture and and other technical info on adhesive label on side panel.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
10~12L balance type & forces exhaust type gas water heater: JSG=balance type gas water heater, JSQ=forces exhaust type gas water, a= nominal heat input(kW) (fixed from 20, 22 to 24), b=volume (fixed from 10, 11 to 12), STc=Sd= the type of casing (c fixed from 27, 28 to 29, d fixed from 21, 25, 22, 21B, 23, 24, 25(A), 25(B), 26, 27, 28, 31, 32, 34 to 35) Casing 1: ST27, S21, Casing 2: ST28, S25, Casing 3: ST29, S22, Casing 4: S21B, Casing 5: S23, Casing 6: S24, Casing 7: S25(A), Casing 8: S25(B), Casing 9: S26, Casing 10: S27, Casing 11: S28, Casing 12: S31, Casing 13: S32, Casing 14: S34, Casing 15: S35. Where a typical code is: ①JSG28-14ST28、JSG14ST-S25: JSG=balance type gas water heater 28=nominal heat input(kW) 14=volume ST28=the type of casing, ST=structure platform S25=the type of casing 14~17L balance type & forces exhaust type gas water heater: JSG=balance type gas water heater, JSQ=forces exhaust type gas water, a= nominal heat input(kW) (fixed from 20, 22 to 24), b=volume (fixed from 10, 11 to 12), STc=Sd= the type of casing (c fixed from 27, 28 to 29, d fixed from 21, 25, 22, 21B, 23, 24, 25(A), 25(B), 27, 28, 31, 32, 34 to 35). Same casings as above but without casing 9. ②JSG14ST-S25(B) 、JSQ28-14ST28 JSG=balance type gas water heater JSQ=forces exhaust type gas water 14=volume 28=nominal heat input(kW) ST=structure platform S25(B)=the type of casing, ST28=the type of casing 22~26L outdoor type gas water heater: JSW=outdoor type gas water heater, a= nominal heat input(kW) (fixed from 44 to 52), b=volume (fixed from 22 to 26), ST58=Wd= the type of casing (d fixed from 81, 82, 83 to 84), Casing 1: ST58, W81, Casing 2: W82, Casing 3: W83, Casing 4: W84. ③JSW44-22ST58、 JSW22HT-W81: JSW=outdoor type gas water heater 44=nominal heat input(kW) 22=volume ST58=the type of casing, HT=structure platform W81=the type of casing
JSG20-10ST27, JSG10ST-S21, JSQ20-10ST27, JSQ10ST-S21, JSG22-11ST27, JSG11ST-S21, JSQ22-11ST27, JSQ11ST-S21, JSG24-12ST27, JSG12ST-S21, JSQ24-12ST27, JSQ12ST-S21, JSG20-10ST28, JSG10ST-S25, JSQ20-10ST28, JSQ10ST-S25, JSG22-11ST28, JSG11ST-S25, JSQ22-11ST28, JSQ11ST-S25, JSG24-12ST28, JSG12ST-S25, JSQ24-12ST28, JSQ12ST-S25, JSG20-10ST29, JSG10ST-S22, JSQ20-10ST29, JSQ10ST-S22, JSG22-11ST29, JSG11ST-S22, JSQ22-11ST29, JSQ11ST-S22, JSG24-12ST29, JSG12ST-S22, JSQ24-12ST29, JSQ12ST-S22, JSG10ST-S21B, JSQ10ST-S21B, JSG11ST-S21B, JSQ11ST-S21B, JSG12ST-S21B, JSQ12ST-S21B, JSG10ST-S23, JSQ10ST-S23, JSG11ST-S23, JSQ11ST-S23, JSG12ST-S23, JSQ12ST-S23, JSG10ST-S24, JSQ10ST-S24, JSG11ST-S24, JSQ11ST-S24, JSG12ST-S24, JSQ12ST-S24, JSG10ST-S25(A), JSQ10ST-S25(A), JSG11ST-S25(A), JSQ11ST-S25(A), JSG12ST-S25(A), JSQ12ST-S25(A), JSG10ST-S25(B), JSQ10ST-S25(B), JSG11ST-S25(B), JSQ11ST-S25(B), JSG12ST-S25(B), JSQ12ST-S25(B), JSG10ST-S26, JSQ10ST-S26, JSG12ST-S26, JSQ12ST-S26, JSG10ST-S27, JSQ10ST-S27, JSG12ST-S27, JSQ12ST-S27, JSG10ST-S28, JSQ10ST-S28, JSG12ST-S28, JSQ12ST-S28, JSG10ST-S31, JSQ10ST-S31, JSG12ST-S31, JSQ12ST-S31, JSG10ST-S32, JSQ10ST-S32, JSG12ST-S32, JSQ12ST-S32, JSG10ST-S34, JSQ10ST-S34, JSG12ST-S34, JSQ12ST-S34, JSG10ST-S35, JSQ10ST-S35, JSG11ST-S35, JSQ11ST-S35, JSG12ST-S35, JSQ12ST-S35. JSG28-14ST27, JSG14ST-S21, JSQ28-14ST27, JSQ14ST-S21, JSG30-16ST27, JSG16ST-S21, JSQ30-16ST27, JSQ16ST-S21, JSG31-17ST27, JSG17ST-S21, JSQ31-17ST27, JSQ17ST-S21, JSG28-14ST28, JSG14ST-S25, JSQ28-14ST28, JSQ14ST-S25, JSG30-16ST28, JSG16ST-S25, JSQ30-16ST28, JSQ16ST-S25, JSG31-17ST28, JSG17ST-S25, JSQ31-17ST28, JSQ17ST-S25, JSG28-14ST29, JSG14ST-S22, JSQ28-14ST29, JSQ14ST-S22, JSG30-16ST29, JSG16ST-S22, JSQ30-16ST29, JSQ16ST-S22, JSG31-17ST29, JSG17ST-S22, JSQ31-17ST29, JSQ17ST-S22, JSG14ST-S21B, JSQ14ST-S21B, JSG16ST-S21B, JSQ16ST-S21B, JSG17ST-S21B, JSQ17ST-S21B, JSG14ST-S23, JSQ14ST-S23, JSG16ST-S23, JSQ16ST-S23, JSG17ST-S23, JSQ17ST-S23, JSG14ST-S24, JSQ14ST-S24, JSG16ST-S24, JSQ16ST-S24, JSG17ST-S24, JSQ17ST-S24, JSG14ST-S25(A), JSQ14ST-S25(A), JSG16ST-S25(A), JSQ16ST-S25(A), JSG17ST-S25(A), JSQ17ST-S25(A), JSG14ST-S25(B), JSQ14ST-S25(B), JSG16ST-S25(B), JSQ16ST-S25(B), JSG17ST-S25(B), JSQ17ST-S25(B), JSG14ST-S27, JSQ14ST-S27, JSG16ST-S27, JSQ16ST-S27, JSG14ST-S28, JSQ14ST-S28, JSG16ST-S28, JSQ16ST-S28, JSG14ST-S31, JSQ14ST-S31, JSG16ST-S31, JSQ16ST-S31, JSG14ST-S32, JSQ14ST-S32, JSG16ST-S32, JSQ16ST-S32, JSG14ST-S34, JSQ14ST-S34, JSG16ST-S34, JSQ16ST-S34, JSG14ST-S35, JSQ14ST-S35,JSG16ST-S35, JSQ16ST-S35. JSW44-22ST58, JSW22HT-W81, JSW52-26ST58, JSW26HT-W81, JSW22HT-W82, JSW26HT-W82, JSW22HT-W83, JSW26HT-W83, JSW22HT-W84, JSW26HT-W84.
Product Images

Approval Holder:
Guangdong Vanward New Electric Co. Ltd.
Company Name
Guangdong Vanward New Electric Co. Ltd.
Address
13 Jianye Mid- Road Shunde High Tech Industry Development Zone
Country
Ronggui Shunde

View All Listings by this Company
Manufacturer:
Guangdong Vanward New Electric Co. Ltd.
Company Name
Guangdong Vanward New Electric Co. Ltd.
Address
13 Jianye Mid- Road Shunde High Tech Industry Development Zone
Country
Ronggui Shunde

View All Listings by this Company

Print This Approval


#240904726

‘PREMIX’ range of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger. The pressurised central heating system incorporates an expansion vessel and pressure relief valve set at 3.0 bar. The supplies to both the domestic hot water and primary circuit are controlled via spherical valves. Maximum working pressures: Primary circuit: 2.5 bar, Secondary circuit 10.0 bar. Maximum operating temperature both circuits: 80°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
240904726
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm compression (Primary Circuit) 15mm compression (Secondary Circuit)
Marking:
E.C.A. on front cover. E.C.A, model and technical information including KW rating on adhesive label on body.
Installation Requirements:
R001 R360
Expiry date:
30/09/2029
Model:
8116350010 CALORA PREMIX 24 HM ERP UK 8116484110 CALORA PREMIX 14 HM ERP UK 8116487110 CALORA PREMIX 20 HM ERP UK 8116356010 CALORA PREMIX 28 HM ERP UK 8116389010 CITIUS PREMIX 14 HM ERP UK 8116392010 CITIUS PREMIX 20 HM ERP UK 8116353010 CITIUS PREMIX 24 HM ERP UK 8116380010 CITIUS PREMIX 28 HM ERP UK 8116576110 Proteus Premix 42 HM DG ERP UK 8116550010 Proteus Premix 45 HM DG ERP UK
Product Images

Approval Holder:
Emas Makina Sanayi A.S.
Company Name
Emas Makina Sanayi A.S.
Address
Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa
Postcode
45030
Country
Turkey
General Email
egecakmakci@emas.com.tr

View All Listings by this Company
Manufacturer:
Emas Makina Sanayi A.S.
Company Name
Emas Makina Sanayi A.S.
Address
Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa
Postcode
45030
Country
Turkey
General Email
egecakmakci@emas.com.tr

View All Listings by this Company

Print This Approval


#240704026

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
Rubinetteria logo, Made in Italy, temperature and pressure cast on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
145.12 - Stopshock 145.
Product Images

Approval Holder:
Rubinetteria Malgorani Pietro Srl
Company Name
Rubinetteria Malgorani Pietro Srl
Address
Via per Invorio 24 28010 Colazza Italy
Phone
0039 322 218129
General Email
fabio@malgorani.it

View All Listings by this Company
Manufacturer:
Rubinetteria Malgorani Pietro Srl
Company Name
Rubinetteria Malgorani Pietro Srl
Address
Via per Invorio 24 28010 Colazza Italy
Phone
0039 322 218129
General Email
fabio@malgorani.it

View All Listings by this Company

Print This Approval


#240704057

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
CIM & Made in Italy on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
CIM 1450 – Water Hammer shock absorber

Approval Holder:
Cimberio S.p.A
Company Name
Cimberio S.p.A
Address
Via Torchio, 57 San Maurizio d’Opaglio
Postcode
28017
Country
Italy
Phone
+39.0322.923001
General Email
tguidetti@cimberio.it

View All Listings by this Company

Print This Approval


#240702708

Range of click type pop-up wastes (brass or plastic bodies - various finishes, see model).

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
240702708
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1¼” BSP (M).
Marking:
ISI on body
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
Plastic body: S8803XX, B952298XX Brass body: E1482XX, B953262XX Where XX denotes finish and can be replace by: All models: AA = Chrome. B953262XX model only: A2 = Brushed Gold, A5 = Magnetic Grey, GN = Silver Storm, XG = Silk Black.
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#240602708

Range of single or twin booster pumps with stainless steel bodies and stainless-steel impellers. Maximum working pressure 8.0 Bar Maximum operating temperature 90.0°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240602708
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” BSPT F 1 ¼” BSPT F 1 ½” BSPT F
Marking:
EBARA logo, model number with additional technical data on adhesive label on body
Installation Requirements:
R001 R415
Expiry date:
30/06/2029
Model:
1970056704I CDE/I 70/05 IE3 1970096604I CDE/I 70/07 IE3 1980096604I CDE/I 120/07 IE3 1980096614I CDE/I 120/106 220/380-460 IE3 1980206604I CDE/I 120/20 IE3 1970106604I CDE/I 90/10 IE3 1970106804I CDE/I 70/12 IE3 1980106604I CDE/I 120/12 IE3 1990106604I CDE/I 200/12 IE3 1990206604I CDE/I 200/20 IE3 1990256604I CDE/I 200/25 IE3 1970056600E CDME/E 70/05 IE2 1970096600E CDME/E 70/07 IE2 1970106600E CDME/E 70/12 IE2 1970106800E CDME/E 90/10 IE2 1980096600E CDME/E 120/07 IE2 1980106600E CDME/E 120/12 IE2 1980206600E CDME/E 120/20 IE2 1990106600E CDME/E 200/12 IE2 1990206600E CDME/E 200/20 IE2 1610036616I CDXE/I 70/076 220/380-460_60 IE3 1610036716I CDXE/I 70/076 220/380-460_60 SCAIE3 1610056616I CDXE/I 70/106 220/380-460_60 IE3 1610056716I CDXE/I 70/106 220/380-460_60 SCA IE3 1610075216I CDXE/I 70/156 220/380-460_60 1615056604I CDXE/I 70/05 IE3 1615056904I CDXE/I 70/05 SCA IE3 1615096504I CDXE/I 70/07 SCA IE3 1615096604I CDXE/I 70/07 IE3 1615106604I CDXE/I 90/10 IE3 1615109704I CDXE/I 90/10 SCA IE3 1620056616I CDXE/I 120/106 220/380-460_60 IE3 1620056716I CDXE/I 120/106 220/380-460_60 SCA IE3 1610075316I CDXE/I 70/156 220/380-460_60 SCA 1620076616I CDXE/I 120/156 220/380-460_60 1620076716I CDXE/I 120/156 220/380-460_60 SC 1620086516I CDXE/I120/206 220/380-460_60 SCA 1625096604I CDXE/I 120/07 IE3 1625096704I CDXE/I 120/07 SCA IE3 1625106304I CDXE/I 120/12 IE3 SCA 1625106604I CDXE/I 120/12 IE3 1625106904I CDXE/I 120/12 SCA IE3 1625206304I CDXE/I 120/20 IE3 SCA 1625206604I CDXE/I 120/20 IE3 1630076616I CDXE/I 200/156 220/380-460_60 1630086616I CDXE/I 200/206 220/380-460_60 1630086716I CDXE/I200/206 220/380-460_60SCA 1630106616I CDXE/I 200/306 220/380-460_60 1630106716I CDXE/I 200/306 220/380-460_60SCA 1635106604I CDXE/I 200/12 IE3 1635106704I CDXE/I 200/12 SCA IE3 1635206604I CDXE/I 200/20 IE3 1635206704I CDXE/I 200/20 SCA IE3 1635256604I CDXE/I 200/25 IE3 1635256704I CDXE/I 200/25 SCA IE3 1610036610E CDXME/E 70/076 220-230_60 IE2 1610056610E CDXME/E 70/106 220-230_60 IE2 1615057400E CDXME/E 70/05 IE2 1615096600E CDXME/E 70/07 IE2 1615106600E CDXME/E 90/10 IE2 1625096600E CDXME/E 120/07 IE2 1625106600E CDXME/E 120/12 IE2 1625206600E CDXME/E 120/20 IE2 1635106600E CDXME/E 200/12 IE2 1635206600E CDXME/E 200/20 IE2 1611106504I 2CDXE/I 70/10 SCA IE3 1611106510I 2CDXE/I 70/106 220/380-460_60 1611106600E 2CDXEM/E 70/10 IE2 1611106604I 2CDXE/I 70/10 IE3 1611106610I 2CDXE/I 70/106 220/380-460_60 SCA 1611126600E 2CDXEM/E 70/12 IE2 1611126604I 2CDXE/I 70/12 IE3 1611126704I 2CDXE/I 70/12 SCA 1611150200E 2CDXEM/E 70/15 IE2 1611156404I 2CDXE/I 70/15 SCA 1611156604I 2CDXE/I 70/15 IE3 1611206600E 2CDXEM/E 70/20 IE2 1611206604I 2CDXE/I 70/20 IE3 1611206804I 2CDXE/I 70/20 SCA IE3 1619206916I 2CDXE/I70/206 220/380-460_60 SCA 1619207516I 2CDXE/I 70/206 220/380-460_60 1619300214I 2CDXE/I 70/306 220/380-460_60 SCA 1619306614I 2CDXE/I 70/306 220/380-460_60 1621150200E 2CDXEM/E 120/15 IE2 1621156600E 2CDXEM/E 120/15 IE2 1621156604I 2CDXE/I 120/15 IE3 1621159604I 2CDXE/I 120/15 SCA 1621206600E 2CDXEM/E 120/20 IE2 1621206604I 2CDXE/I 120/20 IE3 1621206616I 2CDXE/I 120/206 220/380-460_60 1621206716I 2CDXE/I 120/206 220/380-460_60 SCA 1621209604I 2CDXE/I 120/20 SCA IE3 1989306316I 2CDXE/I 120/306 220/380-460_60 1989306404I 2CDXE/I 120/30 IE3 SCA 1989306604I 2CDXE/I 120/30 IE3 1989306816I 2CDXE/I120/306 220/380-460_60SCA 1989400206I 2CDXE/I 120/406 220/380-460_60 1989400216I 2CDXE/I 120/406 220/380-460_60 SCA 1989406604I 2CDXE/I 120/40 IE3 1989406704I 2CDXE/I 120/40 IE3 SCA 1999306604I 2CDXE/I 200/30 IE3 1999309604I 2CDXE/I 200/30 SCA IE3 1999400206I 2CDXE/I 200/406 220/380-460_60 1999406604I 2CDXE/I 200/40 IE3 1999409604I 2CDXE/I 200/40 SCA IE3 1999500206I 2CDXE/I 200/506 220/380-460_60 1999500216I 2CDXE/I 200/506 220/380-460_60 SCA 1999506604I 2CDXE/I 200/50 IE3 1999509604I 2CDXE/I 200/50 IE3 SCA 1999400216I 2CDXE/I 200/406 220/380_460_60SCA 1611100206E 2CDXME/E 70/106 220-230_60 IE2
Product Images

Approval Holder:
Ebara Pumps Europe S.p.A.
Company Name
Ebara Pumps Europe S.p.A.
Address
Via Campo Sportivo, 30 – 38023 Cles (TN)
Country
Italy
Phone
0039 444 706 811

View All Listings by this Company
Manufacturer:
Ebara Pumps Europe S.p.A.
Company Name
Ebara Pumps Europe S.p.A.
Address
Via Campo Sportivo, 30 – 38023 Cles (TN)
Country
Italy
Phone
0039 444 706 811

View All Listings by this Company

Print This Approval


#240704724

Range of single or twin shower pumps with brass bodies, brass impeller supplied with flexible connection hoses that incorporate servicing valves. Maximum Working pressure 6 Bar Maximum operating temperature 65°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240704724
Size:
ROI suffix models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 21mm push-fit end connections (inlet/outlet). EXP suffix models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections (inlet/outlet). OEM 44741: Monsoon U4.5 bar Single: ¾” BSP (M) (inlet/outlet) (No hose provided). All other models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 22mm push-fit end connections (inlet/outlet).
Marking:
Adhesive label on body stating Stuart Turner, model no, serial no, part no, pressure rating, Monsoon, Manufacturer address and other technical information Expansion vessel labelled with volume and pressure rating
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
46505: Monsoon U1.5 bar Twin, 46498: Monsoon U2.0 bar Single, 46480: Monsoon U2.0 bar Twin, 46414: Monsoon U4.5 bar Single, 46413: Monsoon U3.0 bar Single, 46412: Monsoon U4.5 bar Twin, 46411: Monsoon U4.0 bar Twin, 46410: Monsoon U3.0 bar Twin, OEM 44741: Monsoon U4.5 bar Single, 44427: Monsoon U3.0 bar Twin, 44426: Monsoon U2.0 bar Twin, 44425: Monsoon U2.0 bar Single, OEM 44340: Monsoon U2.0 bar Twin, 44753: Monsoon U1.5 bar Twin, 46505ROI: Monsoon U1.5 bar Twin, 46498ROI: Monsoon U2.0 bar Single, 46480ROI: Monsoon U2.0 bar Twin, 46414ROI: Monsoon U4.5 bar Single, 46413ROI: Monsoon U3.0 bar Single, 46412ROI: Monsoon U4.5 bar Twin, 46411ROI: Monsoon U4.0 bar Twin, 46410ROI: Monsoon U3.0 bar Twin, 46505EXP: Monsoon U1.5 bar Twin, 46498EXP: Monsoon U2.0 bar Single, 46480EXP: Monsoon U2.0 bar Twin, 46414EXP: Monsoon U4.5 bar Single, 46413EXP: Monsoon U3.0 bar Single, 46412EXP: Monsoon U4.5 bar Twin, 46411EXP: Monsoon U4.0 bar Twin, 46410EXP: Monsoon U3.0 bar Twin.
Product Images

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval


#240904711

Range of single stage booster pumps incorporating a flow switch. Model 46349 CH 12-14 B is supplied with a pressure vessel and incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with a strainer and stainless-steel braided EPDM lined flexible connection hoses. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240904711
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
Stuart Turner and technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
30/09/2029
Model:
46387 CH 9-14 FL CH Single Stage Automatic Flow Switch: 1” BSP (M). 46349 CH 12-14 B CH Single Stage Boostamatic: 1” BSP (F).
Product Images

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company
Manufacturer:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval


#241008001

Range of overhead shower outlets with (brass bodies – various finishes) incorporating stainless-steel filter washers at the inlet. Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
241008001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP (F)
Marking:
Moon Shower on connection.
Installation Requirements:
R001 R040
Expiry date:
31/10/2029
Model:
MS-TRB064CP, MS‐TRB002CP, MS‐TRB004CP, MS‐TRB010CP, MS-TRB010DYB (Matte Black), MS‐TRB012CP, MS‐TRB013CP, MS‐TRB077CP, MS‐TRB078CP, MS‐TRB079CP, MS‐TSB009CP, MS‐TSB012CP, MS‐TSB014CP, MS‐TSB015CP, MS‐TSB052CP, MS‐TSB053CP, MS‐TSB065CP, MS‐TSB066CP, MS‐TSB067CP, MS-TSB003CP, MS-TRB051XQ, MS-TRB052XQ, MS-TRB053XQ, MS-TRT003XQ, MS-TRT005XQ, MS-TRT012XQ, MS-TRT013XQ, MS-TRT014XQ, MS-TRT041XQ, MS‐TSB044XQ, MS‐TSB045XQ, MS‐TSB046XQ, MS‐TST013XQ, MS‐TST019XQ, MS‐TST035XQ, MS‐TST036XQ, MS‐TST037XQ, MS-TST032XQ, MS-TST053XQ, MS-TST080XQ.
Product Images

Approval Holder:
Jiangmen Moon Shower Sanitaryware Co., Ltd.
Company Name
Jiangmen Moon Shower Sanitaryware Co., Ltd.
Country
China

View All Listings by this Company
Manufacturer:
Jiangmen Moon Shower Sanitaryware Co., Ltd.
Company Name
Jiangmen Moon Shower Sanitaryware Co., Ltd.
Country
China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 95 of 116

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.