Directory Search Results

Print List

#2006372

Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
1210 Fittings for use with Tube and Pipe
Section Subtitle:
End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2006372
Size:
6mm – 54mm.
Marking:
Endex & size on body.
Installation Requirements:
R001
Expiry date:
30/06/2025
Model:
N18S N18 N21S N21 N20 NS62 N63 N23 N22 N12 NS12 N24 N1R N6 N1 N61 N25/N26/N27/N28 N1S N12B N1IM NS12S

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#240904726

‘PREMIX’ range of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger. The pressurised central heating system incorporates an expansion vessel and pressure relief valve set at 3.0 bar. The supplies to both the domestic hot water and primary circuit are controlled via spherical valves. Maximum working pressures: Primary circuit: 2.5 bar, Secondary circuit 10.0 bar. Maximum operating temperature both circuits: 80°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
240904726
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm compression (Primary Circuit) 15mm compression (Secondary Circuit)
Marking:
E.C.A. on front cover. E.C.A, model and technical information including KW rating on adhesive label on body.
Installation Requirements:
R001 R360
Expiry date:
30/09/2029
Model:
8116350010 CALORA PREMIX 24 HM ERP UK 8116484110 CALORA PREMIX 14 HM ERP UK 8116487110 CALORA PREMIX 20 HM ERP UK 8116356010 CALORA PREMIX 28 HM ERP UK 8116389010 CITIUS PREMIX 14 HM ERP UK 8116392010 CITIUS PREMIX 20 HM ERP UK 8116353010 CITIUS PREMIX 24 HM ERP UK 8116380010 CITIUS PREMIX 28 HM ERP UK 8116576110 Proteus Premix 42 HM DG ERP UK 8116550010 Proteus Premix 45 HM DG ERP UK
Product Images

Approval Holder:
Emas Makina Sanayi A.S.
Company Name
Emas Makina Sanayi A.S.
Address
Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa
Postcode
45030
Country
Turkey
General Email
egecakmakci@emas.com.tr

View All Listings by this Company
Manufacturer:
Emas Makina Sanayi A.S.
Company Name
Emas Makina Sanayi A.S.
Address
Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa
Postcode
45030
Country
Turkey
General Email
egecakmakci@emas.com.tr

View All Listings by this Company

Print This Approval


#2103042

Range of rotating piston, volumetric in-line water meters with brass bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Size:
¾” BSP - 2” BSP (M) inlet and outlet.
Marking:
George Kent on lid.
Installation Requirements:
R001
Expiry date:
31/03/2026
Model:
GKMV30 - DN15, 20, 25, 30 & 40

Approval Holder:
George Kent (Malaysia) Berhad
Company Name
George Kent (Malaysia) Berhad
Address
1115 Blok A, Jalan Puchong, Taman Meranti Jaya, 47120 Puchong, Selangor Darul Ehsan
Country
Malaysia

View All Listings by this Company

Print This Approval


#240902072

Range of water meters with either cast iron (blue epoxy coated) or stainless-steel bodies, transducers and EPDM rubber O-rings. Maximum working pressure 25.0 Bar. Maximum operating temperature 50.0°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Flanged - DN40 to DN100.
Marking:
Helvatron, Model number and product information on data plate.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
HELVATRON H20 FLANGE

Approval Holder:
Helvatron AG
Company Name
Helvatron AG
Address
JOCHLERWEG 2 CH-6340 BAAR SWITZERLAND

View All Listings by this Company

Print This Approval


#241002010

Range of in-line water meters with brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) to 1½” BSP (M)
Marking:
ZENNER on cover. Flow arrow on body. Zenner and product info on meter face.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
176104 IUWS hydr. 2,5-110-1/2 D-cell 176105 IUWS hydr. 2,5-165-1/2 D-cell 176106 IUWS hydr. 2,5-170-1/2 D-cell 176672 IUWS hydr. 2,5-190-1/2 D-cell 176594 IUWS hydr. 4-105-3/4 D-cell 176107 IUWS hydr. 4-130-3/4 D-cell 176108 IUWS hydr. 4-165-3/4 D-cell 176139 IUWS hydr. 4-190-3/4 D-cell 183453 IUWS hydr. 4-220-3/4 D-cell 176140 IUWS hydr. 10-150-1 D-cell 181523 IUWS hydr. 10-160-1 D-cell 181525 IUWS hydr. 10-160-5/4 D-cell 176142 IUWS hydr. 10-260-5/4 D-cell 176519 IUWS hydr. 16-150-6/4 D-cell 176520 IUWS hydr. 16-200-6/4 D-cell 176521 IUWS hydr. 16-300-6/4 D-cell 176522 IUWS hydr. 25-300-2 D-cell
Product Images

Approval Holder:
Zenner International Gmbh & Co. KG
Company Name
Zenner International Gmbh & Co. KG
Address
Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany
Country
Germany

View All Listings by this Company
Manufacturer:
Zenner Meters (Shanghai) Ltd.
Company Name
Zenner Meters (Shanghai) Ltd.
Address
No 15 Dongxing Road Songjiang Ind Zone Shanghai
Country
China

View All Listings by this Company

Print This Approval


#240902075

Range of in-line water meters with plastic bodies. The inlet incorporates a plastic filter. Maximum working pressure; 16 Bar Maximum operating temperature 50°C

Section:
1505 Water Meters
WRAS Approval Number:
240902075
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1" BSP (M)
Marking:
Contazara, Model and technical information on faceplate. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
CZ4000- Q3=4

Approval Holder:
Contadores De Agua De Zaragoza S.A. (Contazara S.A.)
Company Name
Contadores De Agua De Zaragoza S.A. (Contazara S.A.)
Address
Carretera Castellon KM. 5 5 50720 Zaragoza Spain

View All Listings by this Company

Print This Approval


#241002014

Range of IUW ultrasonic water meters with blue epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature: 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models below, note all sizes listed in DN are flanged connections.
Marking:
Zenner, DN, Year of manufacture (YYYY) and technical information on dial face. Size & flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
160113 IUW Q3-25, DN50, Length 200mm 168288 IUW Q3-25, DN50, Length 270mm 173783 IUW Q3-25, DN50, Length 300mm 160115 IUW Q3-40, DN65, Length 200mm 168289 IUW Q3-40, DN65, Length 300mm 160117 IUW Q3-63, DN80, Length 225mm 168290 IUW Q3-63, DN80, Length 300mm 176100 IUW Q3-63, DN80, Length 225mm 184224 IUW Q3-63, DN80, Length 200mm 168291 IUW Q3-100, DN100, Length 360mm 173785 IUW Q3-100, DN100, Length 350mm 176101 IUW Q3-100, DN100, Length 250mm 169642 IUW Q3-160, DN125, Length 250mm 169643 IUW Q3-250, DN150, Length 300mm 171335 IUW Q3-250, DN150, Length 500mm 169645 IUW Q3-400, DN200, Length 350mm 169647 IUW Q3-630, DN250, Length 450mm 169648 IUW Q3-1000, DN300, Length 500mm
Product Images

Approval Holder:
Zenner International Gmbh & Co. KG
Company Name
Zenner International Gmbh & Co. KG
Address
Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany
Country
Germany

View All Listings by this Company

Print This Approval


#240904713

Range of leak detection devices incorporating a DZR brass body and non-return valve (not intended for and not suitable for backflow protection). Models Stopleak 1 & Stopleak 2 incorporate a spherical valve. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
240904713
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
RBM, flow arrow, PN & CR on body. RBM and product info on control unit.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
Stopleak 1: ¾” BSP (M) Stopleak 2: 1” BSP (M) Stopleak 3: 1” BSP (M) x ¾” BSP (M) reducer
Product Images

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#240704056

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
Company logo, Made in Italy, temperature and pressure cast on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
54DM15000 & 54DM15000XX Stopshock xx (Packaging variation)

Approval Holder:
Barberi Rubinetterie Industriali Srl
Company Name
Barberi Rubinetterie Industriali Srl
Address
Via Monte Fenera 7 13018 Valduggia Italy
Phone
+39 163 48 284
General Email
barberi@barberi.it

View All Listings by this Company

Print This Approval


#2310406

Hydraulic circuit used to control the water path within the heating and sanitary boiler, with plastic body incorporating filter, flow regulator, plate heat exchanger and EPDM O-rings. Maximum working pressure 7.0 bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
Size:
¾”BSP(M) x ½”BSP(M).
Marking:
Company logo on body (CHUNHUi)
Installation Requirements:
R001 R008
Expiry date:
31/10/2028
Model:
FUSION ASTRO- Engineering Plastics Hydraulic Circuit.

Approval Holder:
THE ELECTRIC HEATING COMPANY LTD
Company Name
THE ELECTRIC HEATING COMPANY LTD
Address
Block 5, Unit 40 Third Road Blantyre Ind Est GLASGOW
Postcode
G72 0UP
Country
United Kingdom
Phone
07986970466
General Email
chris@electric-heatingcompany.co.uk

View All Listings by this Company
Manufacturer:
Zhejiang Chunhui Intelligent Control Co Ltd
Company Name
Zhejiang Chunhui Intelligent Control Co Ltd
Address
No. 288 Chunhui Industrial Rd. Shangyu, Zhejiang
Country
China
General Email

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 940 of 1111

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.