'1024 Titan Bladder'. Clear (translucent), extruded TPU bladder. Shore hardness 87. Tested in-radius size 0.48mm. For use with water up to 80°C.

Section:

5298 Polyurethane

Section Subtitle:

Components.

WRAS Approval Number:

241155003

Expiry date:

30/11/2029

Approval Holder:

Toldos Titan SA

Company Name

Toldos Titan SA

Address

Carretera Bilbao Galdako No.2 1ª PLTA Bilbao 48004 Bilbao

Country

Spain

View All Listings by this Company

'Pimtaş Plastik PVC-U Pipe'. Grey coloured, extruded PVC-U pipe. For use with water up to 50°C.

Section:

5300 Polyvinylchloride (PVC, PVC-U and CPVC)

Section Subtitle:

Components - only lead free PVC-U listed in this section.

WRAS Approval Number:

240755054

Expiry date:

31/07/2029

Approval Holder:

Pimtas Plastik Insaat Malz. San. Ve Tic A.S.

Company Name

Pimtas Plastik Insaat Malz. San. Ve Tic A.S.

Address

Pelitli Neighborhood 4443, Street No: 5, 41400 Gebze, Kocaeli

Country

Turkey

View All Listings by this Company

'+GF+ uPVC Pressure pipe'. Grey coloured, extruded uPVC pipe. For use with water up to 50°C.

Section:

5300 Polyvinylchloride (PVC, PVC-U and CPVC)

Section Subtitle:

Components - only lead free PVC-U listed in this section.

WRAS Approval Number:

240755066

Expiry date:

31/07/2029

Approval Holder:

GF Corys Piping Systems

Company Name

GF Corys Piping Systems

Address

Nizwa Industrial Estate, Plot No. 49 & 50, Tamsa, Nizwa

Country

Oman

View All Listings by this Company

'E 71 65 003'. Black coloured, injection moulded EPDM 'O' rings. Shore hardness 70. Tested in-radius size between 0.5mm & 3.5mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

240855019

Expiry date:

31/08/2029

Approval Holder:

Italian Gasket SpA

Company Name

Italian Gasket SpA

Address

Via Tengattini 9, 25030 Paratico (BS)

Country

Italy

View All Listings by this Company

'TRA-7073'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240655067

Expiry date:

30/06/2029

Approval Holder:

Talbros Sealing Material Pvt. Ltd.

Company Name

Talbros Sealing Material Pvt. Ltd.

Address

Plot No. 60, Sec-6, Faridabad Haryana, Pin Code 121006

Country

India

View All Listings by this Company

'EPDM70(E7-512K)'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240855017

Expiry date:

31/08/2029

Approval Holder:

Air Water Mach Rubber Products (Fujian) CO., LTD.

Company Name

Air Water Mach Rubber Products (Fujian) CO., LTD.

Address

Rongqiao Economy and Technology Development Zone, Fuqing City, Fujian Province

Country

China

View All Listings by this Company

'FDJ-75'. Black coloured, injection moulded FKM rubber material. Shore hardness 76. Tested in-radius size 1.03mm. For use with water up to 85°C.

Section:

5375 Rubbers

Section Subtitle:

Fluorocarbon - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240855018

Expiry date:

31/08/2029

Approval Holder:

AVK GUMMI A/S

Company Name

AVK GUMMI A/S

Address

Mosegaardsvej 1, DK 8670 Laasby

Country

Denmark

Phone

+45 8695 1311

General Email

avkgummi.dk

View All Listings by this Company

'Loctite 403'. Clear, liquid cyanoacrylate adhesive. Apply as per manufacturer's technical data sheet reference ‘2.6’, dated August 2012. Cure for 72 hours@22°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5440 Sealants - Flat Faced Joints

Section Subtitle:

General.

WRAS Approval Number:

240855020

Expiry date:

31/08/2029

Approval Holder:

Henkel Ltd.

Company Name

Henkel Ltd.

Address

Technologies House, Wood Lane End, Hemel Hempstead

Postcode

HP2 4RQ

Country

Herts

Phone

+44 1442 278 100

General Email

loctite.connect@henkel.com

View All Listings by this Company

‘JET Pipe Sealing Cord’. White coloured nylon cord coated with a silicone paste, intended for use as a thread sealant. The cord is to be applied and tightened in accordance with Data Sheet ‘P02415', updated 11/07/24 and this material is only approved for these conditions. For use with water up to 85°C.

Section:

5510 Sealants - Screwed Joints

Section Subtitle:

General.

WRAS Approval Number:

2312572

Expiry date:

31/12/2028

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

2 Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

'Datkafix DF-43'. Blue coloured pipe sealant. Apply as per manufacturer's TDS '01/02/2024 v1.1'. Cure for 24 hours@23°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5510 Sealants - Screwed Joints

Section Subtitle:

General.

WRAS Approval Number:

2305563

Expiry date:

31/05/2028

Approval Holder:

Datka Plastik Sanayi Limited Şirketi

Company Name

Datka Plastik Sanayi Limited Şirketi

Address

Kültür Mahallesi Mithatpaşa Caddesi No:45/1 Çankaya Ankara

Country

Turkey

View All Listings by this Company