Range of in-line hex key operated spherical valves incorporating nickel plated or chromium plated brass bodies and chromium plated brass balls. The compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with stainless steel bodies, stainless steel ball and lever operating members. The press-fit connection is for use with stainless steel pipe (manufactured to EN10312). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves, with DZR brass bodies and chromium plated brass balls. The products can be supplied with various operating members (see model). Maximum working pressure 40.0 bar. Maximum operating temperature 85°C.
Range of in-line hex key operated spherical valves incorporating nickel plated or chromium plated brass bodies and chromium plated brass balls. The compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Quarter turn, butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of plastic bodies spherical valves (black, white and grey) incorporating either a screwdriver slot, lever or handwheel operating member (model specific). The pushfit connections are for use with DM LLDPE tubing (not supplied) and PEX barrier pipe (manufactured to BS7291-3). When used with DM LLDPE tubing (not supplied) the supplied black or grey pipe inserts must be installed. When used with PEX barrier pipe the supplied beige pipe inserts must be installed. Maximum working pressures and temperatures: When used with DM LLDPE tubing: Grey body valves, for sizes 6-15mm and ¼”-½” pushfit: 12.0 bar, cold water use only. Grey body valves, for sizes 6-12mm and ¼”-½” pushfit: 7.0 bar @ 65°C. Black and white body valves, for sizes 6-15mm and ¼”-½” pushfit: 12.0 bar, cold water use only and 7.0 bar @ 65°C. When used with PEX Barrier pipe (manufactured to BS7291-3): Grey body valves, for sizes 15-22mm, 5/8” and 7/8” pushfit: 12.0 bar, cold water use only. Black and white body valves, for sizes 15-22mm, 5/8” and 7/8” pushfit: 12.0 bar, cold water use only and 7.0 bar @ 65°C. All fittings which incorporate a barbed end connection are open outlet use only.
Range of screw down valves with brass or DZR brass bodies, brass or DZR brass bonnets, EPDM washers and PTFE seats. Compression connection to be used with copper pipe manufactured to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 85°C.
Flomasta Range of plastic, push-fit stop valves for use with MDPE pipe (manufactured to BS EN 12201). Maximum working pressure 16.0 bar. Cold water use only.
UV Home’ range of UV disinfection units with 304L or 316L stainless steel bodies (see models). Maximum working pressure for UV HOME 2 & 3 is 6 bar. Maximum working pressure for UV HOME 6 & 9 is 10 bar. Maximum operating temperature 35°C.
'TML Dalmia Sulphate Resisting cement'. Factory applied, grey coloured sulphate resisting cement. Mix cement, sand and water in a mass ratio of 1:1.50:0.50 and apply as per manufacturer's instructions 'TSL/TSMD/DI/QA/TPI/DC/004', dated '09/06/2025'. Cure for 4 hours@28°C. Then 4 hours@45°C. Then 6 hours@40°C (humidity greater than 85%). Then 666 hours@35°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
Page 905 of 1014
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
