Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250904707

Range of pre-assembled hydraulic blocks incorporating plate heat exchangers, pressure relief valves set at 3.0 bar, circulation pumps and flow regulators. Maximum working pressure: Primary 2.5bar & secondary 10 bar. Maximum operating temperature 80°C (CH) & 60°C (DHW).

Section:: 1350 Heat Exchangers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm & 22mm Compression.
Marking:: Bosch, model code and other technical information on adhesive label on assembly.
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: 8-718-684-683.

Approval Holder:: Bosch Thermotechnology Ltd.

Company Name
Bosch Thermotechnology Ltd.
Address
Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire
Postcode
S45 9BY

View All Listings by this Company
Manufacturer:: Bosch Thermotechnik GmbH

Company Name
Bosch Thermotechnik GmbH
Address
Sophienstrasse 30 - 32 D-35576 Wetzlar Germany

View All Listings by this Company

WRAS Approval Number: #250904711

Range of floor-standing gas combination boilers, supplied with isolation valves, expansion vessel and a pressure relief valve set at 3.0 bar. Maximum working pressure: Primary circuit 2.5 bar, secondary 10 bar. Maximum operating temperature: Primary 82°C / secondary circuit 60°C.

Section:: 1465 Heaters
Section Subtitle:: Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:: 250904711
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 22mm compression.
Marking:: Worcester on front cover. Worcester and product info on label inside cover.
Installation Requirements:: R001 R140 R360
Expiry date:: 30/09/2030
Model:: 7-731-600-297 Greenstar 8000F 35kW Combi NG, 7-731-600-298 Greenstar 8000F 35kW Combi LPG, 7-731-600-299 Greenstar 8000F 50kW Combi NG, 7-731-600-300 Greenstar 8000F 50kW Combi LPG.

Approval Holder:: Bosch Thermotechnology Ltd.

Company Name
Bosch Thermotechnology Ltd.
Address
Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire
Postcode
S45 9BY

View All Listings by this Company

WRAS Approval Number: #250902024

Range of water meters with brass bodies. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature is 50°C or 85°C, please refer to model.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (M) or 1” BSP (M)
Marking:: APATOR, date of manufacture (YYYY) and product information on face of water meter. Flow arrow on body.
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: Maximum operating temperature 50°C: JS 1,6-02 JS 1,6-04 JS 1,6-NK JS 1,6-NKP JS 4-02 JS 4-04 JS 4-NK JS 4-NKP JS 2,5-02 JS 2,5-04 JS 2,5-NK JS 2,5-NKP JS 2,5-G1-02 JS 2,5-G1-04 JS 2,5-G1-NK JS 2,5-G1-NKP Maximum operating temperature 85°C: JS90 1,6-02 JS90 1,6-04 JS90 1,6-NK JS901,6-NKP JS90 2,5-02 JS90 2,5-04 JS90 2,5-NK JS90 2,5-NKP JS90 2,5-G1-02 JS90 2,5-G1-04 JS90 2,5-G1-NK JS90 2,5-G1-NKP JS90 4-02 JS90 4-04 JS90 4-NK JS90 4-NKP

Approval Holder:: Pittway Sarl

Company Name
Pittway Sarl
Address
A3 - ZA La Pièce 6 1180 Rolle
Country
Switzerland

View All Listings by this Company
Manufacturer:: Apator Powogaz S.A.

Company Name
Apator Powogaz S.A.
Address
Jaryszki 1C, 62-023 Żerniki
Country
Poland
Phone
+48 789 454 593

View All Listings by this Company

WRAS Approval Number: #250902026

An in-line ultra-sonic water meter with brass (WM15) or plastic (SM15) bodies. Maximum working pressure: 16 Bar. Maximum operating temperature: 50°C (WM15) or 70°C (SM15).

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (M).
Marking:: Sagemcom, CE, DN, max temperature and other technical information on meter face. Flow arrow on body
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: WM15: available in 110mm, 115mm, 165mm lengths. SM15: available in 110mm length.

Approval Holder:: Sagemcom Energy & Telecom

Company Name
Sagemcom Energy & Telecom

View All Listings by this Company

WRAS Approval Number: #251102010

Range of water meters with plastic bodies and EPDM ‘O’-rings. The inlets incorporate a plastic strainer. Maximum working pressure 10.0 Bar Maximum operating temperature 50.0°C

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1¼” BSP M 1½” BSP M
Marking:: Arad on cover. Flow arrow and size on body. Arad and product info on dial face
Installation Requirements:: R001
Expiry date:: 30/11/2030
Model:: M DN25 1” WITH POLYMER BODY – Inlet thread 1’’ BSP 1¼" BSP Outlet thread 1’’ BSP or 1¼'' BSP M DN32 1¼''” WITH POLYMER BODY - Inlet thread 1¼'' "BSP 1½ " BSP Outlet thread 1¼'' BSP or 1½ " BSP

Manufacturer:: Arad GROUP Ltd.

Company Name
Arad GROUP Ltd.
Address
Kibbutz Dalia 1923900 Kibutzz Dalia
Country
Israel
Phone
+972-4-9897906

View All Listings by this Company

WRAS Approval Number: #250904009

Range of water meters with plastic bodies and plastic turbines. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: SJ-SDC plus.
Marking:: NWM, NWM logo, and tech info on dial face. Flow arrow and DN on valve body. NWM & NWM logo on cover.
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: ½” BSP (M) inlet / ½” BSP (M)outlet (DN15), ¾” BSP (M) inlet / ¾” BSP (M)outlet (DN20), ½” NPT (M) inlet / ½” NPT (M) outlet (DN15), ¾” NPT (M) inlet / ¾” NPT (M) outlet (DN20).

Approval Holder:: Ningbo Water Meter (Group) Co., Ltd

Company Name
Ningbo Water Meter (Group) Co., Ltd
Address
No 355 Hongxing Road Jiangbei District Ningbo
Country
China

View All Listings by this Company

WRAS Approval Number: #260102702

Wall outlet socket with brass body. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (F) x ¾” BSP (F)
Marking:: VOLA on body
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: Vola 200M

Manufacturer:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846

View All Listings by this Company

WRAS Approval Number: #250902704

Compact wall outlet elbow with brass body (various finishes). Maximum operating temperature 85.0°C Open outlet use only

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: Aqualisa on body
Installation Requirements:: R001 R040
Expiry date:: 30/09/2030
Model:: 1001359 ** ** Where ** ** denotes the finish and can be replaced with the following: AA = Chrome AD = Matt Black AH = Core Brushed Brass Post 24 (Xenia) AJ = Core Brushed Gunmetal Grey AQ = Aqualisa (Brand)

Approval Holder:: Aqualisa Products Ltd.

Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

WRAS Approval Number: #250904703

Range of flow sensors incorporating either brass, plastic or stainless steel bodies & EPDM ‘O’-rings. Maximum working pressure 10.0 bar for models VVXA, VVXC, VVXB. Maximum working pressure 16.0 bar for models VVXD & VVXE. Maximum operating temperature 90°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Sika logo, pressure, temperature, other tech info on body; flow arrow on body.
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: VVXA Vortex Flow Sensor Type VVX15 Vortex Flow Sensor nominal size 15. Body material PPS, G ¾ male or ½” NPT male VVXC Vortex Flow Sensor Type VVX20 Vortex Flow Sensor nominal size 20. Body material PPS G 1 male or ¾” NPT male or Quick-Fasten male/female VVXB Vortex Flow Sensor Type VVX25 Vortex Flow Sensor nominal size 25. Body material PPS G 1¼ male or 1” NPT male VVXD Vortex Flow Sensor Type VVX32 Vortex Flow Sensor nominal size 32. Body material brass or stainless steel G 1½ male or 1½” NPT male VVXE Vortex Flow Sensor Type VVX40 Vortex Flow Sensor nominal size 40. Body material brass or stainless steel G 2 male or 2” NPT male • digit 1,2,3: Designation of the series o VVX >>> VVX series • digit 4: nominal diameter o A >>> DN 15 for type VVX15 o C >>> DN 20 for type VVX20 o B >>> DN 25 for type VVX25 o D >>> DN 32 for type VVX32 o E >>> DN 40 for type VVX40 • digit 5,7,8,9,10,11,12,13,14,15: Device configuration • digit 6: Private label o S >>> SIKA (standard) o E >>> SIKA (standard) with ETL marking • digit 4 and 16: tube material / process connection o A and 4 >>> PPS – G 3/4 male thread o A and C >>> PPS – ½”NPT male thread o C and P >>> PPS – Quick-Fasten connection o C and 7 >>> PPS – G 1 male thread o C and 8 >>> PPS – 3/4" NPT male thread o B and 6 >>> PPS – G 1 1/4 male thread o B and E >>> PPS – 1” NPT male thread o D and U >>> Brass – G 1 1/2 male thread o D and 0 >>> Brass – 1½" NPT male thread o D and M >>> Stainless steel – G 1 1/2 male thread o D and Y >>> Stainless steel – 1½" NPT male thread o E and X >>> Brass – G 2 male thread o E and 9 >>> Brass – 2" NPT male thread o E and O >>> Stainless steel – G 2 male thread o E and Z >>> Stainless steel – 2" NPT male thread

Approval Holder:: SIKA Systemtechnik GmbH

Company Name
SIKA Systemtechnik GmbH
Address
Struthweg 7-9 Kaufungen
Postcode
34260
Country
Germany
Phone
+49 5605 803 652
General Email
grass@sika.net

View All Listings by this Company

WRAS Approval Number: #250915010

Range of EPDM expansion joints with flanged end conenctors. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: SHANGHAI LIANYANG METAL & RUBBER CO., LTD logo (‘MR-FLEX’) and size on body.
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: S-100: DN32 - DN300, S-101: DN25 - DN300, S-115: DN25 - DN300.

Approval Holder:: SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Company Name
SHANGHAI LIANYANG METAL & RUBBER CO., LTD
Address
No.2 Building, No.399 Zhongqu Road, Industrial estate Maogang Town, Songjiang, Shanghai
Country
China
General Email
sha.lyang@kenpogroup.com

View All Listings by this Company
Manufacturer:: SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Company Name
SHANGHAI LIANYANG METAL & RUBBER CO., LTD
Address
No.2 Building, No.399 Zhongqu Road, Industrial estate Maogang Town, Songjiang, Shanghai
Country
China
General Email
sha.lyang@kenpogroup.com

View All Listings by this Company