Directory Search Results

Print List

#250855007

‘JCP PURE EPOXY RESIN JF375E'. Site applied, two-part (resin & hardener is automatically mixed in a 3:1 volume ratio through dispensing nozzle) anchor resins, available in light pink or grey colours. Apply and cure as per ’T Load’ cures set out in Table B3 of European Technical Assessment ‘ETA 17/0011’, dated ‘30/01/2023’. For use with water up to 65°C. If the cure conditions are varied from those specified in ’T Load’ cures set out in set out in Table B3 of European Technical Assessment ‘ETA 17/0011’ then the materials are not covered by the scope of the approval. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water.

Section:
5311 Resin Anchors
Expiry date:
31/08/2030

Approval Holder:
Hexstone Ltd.
Company Name
Hexstone Ltd.
Address
Opal Way, Stone Business Park, Stone, Staffordshire
Postcode
ST15 0SW

View All Listings by this Company

Print This Approval


#2307545

'EP 70110 HC'. Black coloured, compression moulded EPDM rubber. Shore hardness 70. Tested in-radius size 1.56mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307545
Expiry date:
31/07/2028

Approval Holder:
Zenith Industrial Rubber Products Pvt. Ltd.
Company Name
Zenith Industrial Rubber Products Pvt. Ltd.
Address
141/144, 14th Floor, Free Press House, Free Press Journal Marg, 215 Nariman Point, Mumbai - 400 021
Country
India

View All Listings by this Company

Print This Approval


#250702036

Range of floor standing, single hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to a shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 Bar Maximum operating temperature 65.0°C

Section:
0463 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.
WRAS Approval Number:
250702036
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.
Marking:
Roxor on body
Installation Requirements:
R001 R020
Expiry date:
31/07/2030
Model:
Binsey BIN321 BIN421 BIN721 BIN821 BIN1521 Cyprus BIN321F BIN421F BIN721F BIN821F BIN1521F
Product Images

Manufacturer:
Ultra Finishing Ltd.
Company Name
Ultra Finishing Ltd.
Address
Raikes Lane Ind Est. Lancashire, BL3 2NH
Phone
01282 436934

View All Listings by this Company

Print This Approval


#251202705

Range of bottom entry BS1212-4 (2016) delayed or non delayed action type float operated valves for WC flushing cisterns. Maximum working pressure 10.0 Bar, cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251202705
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
FLUME on float. BS1212-4 only body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/12/2030
Model:
AB769 Bottom entry inlet valve with G1/2” plastic thread AB769 Bottom entry inlet valve with G1/2” brass thread

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#251102003

Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251102003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Model can be supplied with either a brass or plastic ½” connection, a plastic 3/8” connection and either delayed or non-delayed action type float valve.
Size:
3/8” BSP (M) 1/2” BSP (M) (brass or plastic inlet connection)
Marking:
FLUME on float. BS1212-4 on body
Installation Requirements:
R001 R550
Expiry date:
30/11/2030
Model:
AB772

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#240602719

Wall hung concealed WC flushing cistern with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602719
Size:
½” BSP (M)
Marking:
Flume on body, 6 litre line inside cistern.
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
AB770

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#260102701

Range of WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
260102701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
WDI, ECO and model inside cistern, 6 litre line inside cistern. WDI on operation member
Installation Requirements:
R001 R556 R571
Expiry date:
31/01/2031
Model:
K301-A01-E01002 K301-A01-E01003 K301-B01-E01002 K301-B01-E01003 K301-D01-E01002 K301-D01-E01003

Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#250701701

Low Level WC suites incorporating a frame mounted ceramic pan that is fitted with a washing & drying arrangement which is fed via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The cistern incorporates a side entry BS1212/4 float operated inlet valve and provides a type `AB` air gap. The drop type flush valve provides a single flush of 6 litres and is operated by elbow push button levers that are designed into the front of the cistern cover. Maximum working pressure 10.0 bar. Cold water use only

Section:
2043 WC incorporates a bidet or washing function
Section Subtitle:
Incorporates a Type AB air gap backflow prevention arrangement upstream of washing and flushing function. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
250701701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Clos-O-Mat on underside of WC seat lid and on data plate. Water level is marked 6 Lit on the inner wall of cistern.
Installation Requirements:
R001 R280 R574
Expiry date:
31/07/2030
Model:
Clos-O-Mat Palma Vita Clos-O-Mat Lima Vita

Approval Holder:
Clos-o-Mat (Great Britain) Ltd.
Company Name
Clos-o-Mat (Great Britain) Ltd.
Address
Building 1 Brooklands Place, Brooklands Road, Sale
Postcode
M33 3SD
Country
Cheshire
Phone
+44 (0) 161 969 1199
General Email
info@clos-o-mat.com

View All Listings by this Company
Manufacturer:
Clos-o-Mat (Great Britain) Ltd.
Company Name
Clos-o-Mat (Great Britain) Ltd.
Address
Building 1 Brooklands Place, Brooklands Road, Sale
Postcode
M33 3SD
Country
Cheshire
Phone
+44 (0) 161 969 1199
General Email
info@clos-o-mat.com

View All Listings by this Company

Print This Approval


#250704010

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies (various finishes). Incorporating quarter turn brass headworks, single lever operating members and self-cancelling diverter to shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). The spout outlet incorporates a plastic flow straightener. The products are supplied with a shower hose, shower handset and brass back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0554 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a swivel spout, incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)
WRAS Approval Number:
250704010
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M).
Marking:
DTC32A, DEVA etched on body, operating member.
Installation Requirements:
R001 R005 R030
Expiry date:
31/07/2030
Model:
ADORE106 - Adore Bath Shower Mixer. ADORE106/501 - Adore Bath Shower Mixer – Gold. Model added February 2026 LACE106 - Lace Deck Mounted Bath Shower Mixer

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#250715311

Section:
0685 Combination Tap Assembly
Description:
A Tap(s) with a non-touch method of flow control incorporating temperature control.
Deck Mounted. Activated via an infra-red sensor. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2030

Product IdentificationSurface Finish / ColourDimensionMax Working Pressure (bar)Max Operating Temp (°C)MarkingMarking locationAll metals in the water pathway are on the 4msi positive listHeadwork for Flow ControlSpout OutletIncludes
OASISBMChrome1/2" BSP (F)865UtopiaBodyNoSolenoidAeratorInlet Hoses

Approval Holder:
Utopia Bath & Kitchen General Trading LLC
Company Name
Utopia Bath & Kitchen General Trading LLC
Address
Office 9-11, Mohd Abdulrahman Al Bahar, Building Salahuddin Street, PO Box 251735 Dubai
Country
United Arab Emirates

View All Listings by this Company
Manufacturers:
ZHEJIANG VOLONG SANITARY WARES CO,LTD.

Print This Approval



Back To Directory Sections

Page 884 of 1044

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.