Range of double regulating valves incorporating bronze bodies with two test ports. Valves are adjusted using a handwheel. Maximum operating pressure: 25 bar. Maximum operating temperature: 85°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

240604010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½”, ¾”, 1”, 1 ¼”, 1 ½” & 2” BSP (F).

Marking:

BMAG, size, PN and a flow arrow on body. BMAG, OPEN, SHUT, WRAS on handwheel.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

BW-Q18 - DN15, DN20, DN25, DN32, DN40 & DN50.

Product Images

Approval Holder:

Ningbo Bestway M&E Co.,Ltd.

Company Name

Ningbo Bestway M&E Co.,Ltd.

Address

Zhenru Center, No.225, Northern Section of Huancheng West Road, Ningbo, Zhejiang

Country

China

View All Listings by this Company

'Ultraform® H4320 AT uncoloured'. Uncoloured (appears white), injection moulded C-POM material. For use with water up to 85°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240655036

Expiry date:

30/06/2029

Approval Holder:

BASF SE

Company Name

BASF SE

Address

Carl-Bosch-Str. 38, 67056 Ludwigshafen

Country

Germany

View All Listings by this Company

'Sikalastic® M689 AE (formerly known MasterSeal® M689AE)'. Factory applied, two-component, light grey coloured (once applied), polyurea coating. Mix parts A & B in a volume ratio of 1:1 and apply as per manufacturer's Product Data Sheet 'MBS_CC-UAE/Sl_M689_06_20/v9/07_23/v10/01_24/v11/03_24'. Cure for 7 days@25°C. For use with water up to 70°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240455060

Expiry date:

30/04/2029

Approval Holder:

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Company Name

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Address

Head Office: P.O. Box 37127, Dubai Investment Park, Phase 1 Expo Road, Dubai

Country

United Arab Emirates

View All Listings by this Company

'LMI.Hygienic HI-Build Epoxy'. Factory applied, two- component, blue coloured epoxy coating. Mix base and hardener in a weight ratio of 100:15 and apply as per manufacturer's instructions 'LMIEP1403032', dated '22/06/2024'. Cure for 2 hours@20°C. For use with water up to 23°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240555058

Expiry date:

31/05/2029

Approval Holder:

L.M.I. Ductile Iron Pipes & Fittings

Company Name

L.M.I. Ductile Iron Pipes & Fittings

Address

Alnasb, Bousher, Muscat Governorate

View All Listings by this Company

'Sikadur® ADH2200 (formerly known MasterBrace® ADH2200)'. Site applied, grey coloured (once applied), two component Epoxy bedding and mortar. Mix parts A and B in a weight ratio of 60:40 and apply as per manufacturer's Product Data Sheet 'MBS_CC-UAE/Br_2200_12_94/v4/07_19/v5/05_20/v6/01_24/v7/03_24'. Cure for 21 days@25°C. For use with water up to 40°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

240455061

Expiry date:

30/04/2029

Approval Holder:

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Company Name

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Address

Head Office: P.O. Box 37127, Dubai Investment Park, Phase 1 Expo Road, Dubai

Country

United Arab Emirates

View All Listings by this Company

'Ultradur® B4520 FC Aqua uncolored'. Uncoloured (appears white), injection moulded PBT materials. For use with water up to 23°C.

Section:

5205 Polybutylene Terephthalate

Expiry date:

30/06/2029

Approval Holder:

BASF SE

Company Name

BASF SE

Address

Carl-Bosch-Str. 38, 67056 Ludwigshafen

Country

Germany

View All Listings by this Company

'662016, 662014, 662062 & 662061'. White coloured, PTFE tape manufactured by calendering. For use with water up to 85°C.

Section:

5294 Polytetrafluoroethylene (PTFE)

Section Subtitle:

Components.

WRAS Approval Number:

2010584

Expiry date:

31/10/2025

Approval Holder:

Arctic Hayes Ltd.

Company Name

Arctic Hayes Ltd.

Address

9 Millshaw Park Avenue, Leeds

Postcode

LS11 0LR

View All Listings by this Company

'70EP505P'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240755014

Expiry date:

31/07/2029

Approval Holder:

Xiamen Baode Tech Rubber Co. Ltd.

Company Name

Xiamen Baode Tech Rubber Co. Ltd.

Address

5th Floor, No. 40, Huli Park, Tong'an Industrial Concentration Zone, Xiamen City, Fujian Province

Country

China

View All Listings by this Company

‘EPDM EV2’. Black coloured, injection moulded EPDM materials. Shore hardness 75A. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2212574

Expiry date:

31/12/2027

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

'70NB502S'. Black coloured, compression moulded NBR rubber. Shore hardness 71. Tested in-radius size 1.0mm. For use with water up to 23°C. From December 2023, the material is suitable for use with water up to 85°C.

Section:

5395 Rubbers

Section Subtitle:

Nitrile (Acrylonitrile Butadiene) material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2206554

Expiry date:

30/06/2027

Approval Holder:

Xiamen Baode Tech Rubber Co. Ltd.

Company Name

Xiamen Baode Tech Rubber Co. Ltd.

Address

5th Floor, No. 40, Huli Park, Tong'an Industrial Concentration Zone, Xiamen City, Fujian Province

Country

China

View All Listings by this Company