Directory Search Results

Print List

#2210300

Range of screw down valves with brass or DZR brass bodies, brass or DZR brass bonnets, EPDM washers and PTFE seats. Compression connection to be used with copper pipe manufactured to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2210300
Size:
15, 20, 22, & 28 mm compression
Marking:
V&G, date of manufacture (MM/YY), EN1213, WRAS, size and flow arrow stamped on body; for DZR body models, with CR mark on body
Installation Requirements:
R001
Expiry date:
31/10/2027
Model:
16.20142.015.CP5R-8510 15MM BRASS STOPCOCK CXC 16.20142.022.CP5R-8510 22MM BRASS STOPCOCK CXC 16.20102.028.CP5R-8510 28MM BRASS STOPCOCK CXC 16.20142.015.CP5R-8511 15MM BRASS STOPCOCK CXC DZR 16.20142.022.CP5R-8511 22MM BRASS STOPCOCK CXC DZR 16.20102.028.CP5R-8511 28MM BRASS STOPCOCK CXC DZR 16.20142.811.CP5R-8510 15MM X 20MM BRASS STOPCOCK CXC 16.20142.820.CP5R-8510 20MM X 20MM BRASS STOPCOCK CXC 16.20142.811.CP5R-8511 15MM X 20MM BRASS STOPCOCK CXC DZR 16.20142.820.CP5R-8511 20MM X 20MM BRASS STOPCOCK CXC DZR
Product Images

Approval Holder:
Zhejiang Valogin Technology Co. Ltd.
Company Name
Zhejiang Valogin Technology Co. Ltd.
Address
Qinggang Technological Ind. Zone, Yuhuan, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
Zhejiang Valogin Technology Co. Ltd.
Company Name
Zhejiang Valogin Technology Co. Ltd.
Address
Qinggang Technological Ind. Zone, Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2210333

Ultra violet disinfection units consisting of a stainless steel body and quartz sleeve. Model WS-10-1206/3030031 Alde Aquaclear has a maximum working pressure of 5.0 bar and a maximum operating temperature of 40°C. All other models have a maximum working pressure of 7.0 bar and a maximum operating temperature of 60°C.

Section:
2411 Disinfection Equipment
Size:
¼” BSP (F).
Marking:
Watersprint, model, flow arrow & other tech info on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
31/10/2027
Model:
WS-10-1206/3030031 Alde Aquaclear. WS-10-1210 Purify SOLO-10. WS-10-1220 Purify SOLO-20. WS-10-1230 Purify SOLO-30. WS-10-1240 Purify SOLO-40.
Product Images

Approval Holder:
Watersprint AB
Company Name
Watersprint AB
Address
Medicon Village, Scheeletorget 1 223 81 Lund
Country
Sweden

View All Listings by this Company

Print This Approval


#2209543

'SPL Gold Sulphate Resisting Portland Cement'. Factory applied, grey coloured Sulphate Resisting Portland Cement. Mix cement, sand and water in a 1.0:1.4:0.35 mass ratio and apply as per manufacturer's work instructions document code 'WI/SP/FINC&B/02', issue '06'. Cure for 24 hours at 27°C & 70% RH. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2209543
Expiry date:
30/09/2027

Approval Holder:
Electrosteel Castings Limited
Company Name
Electrosteel Castings Limited
Address
Rachagunneri Village, Srikalahsathi Mandal, Tirupati District, Andhra Pradesh - 517641
Country
India

View All Listings by this Company

Print This Approval


#2206539

'Endoprene 888.55'. Factory applied, two-component, beige coloured polyurethane coating. Mix and apply as per manufacturer's Data Sheet 'Doc. 089' dated '01/07/2011'. Cure for 8 days@20°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2206539
Expiry date:
30/06/2027

Approval Holder:
BS Coatings
Company Name
BS Coatings
Address
Allee Paul Sabatier, BP 88, 27940 Aubevoye
Country
France
Phone
+ 33 32773077

View All Listings by this Company

Print This Approval


#2210513

'Art-Coat'. Factory applied, colourless (transparent) PTFE based surface treatment coating. Apply as per manufacturer's instructions 'revision 3' dated 16-03-2020. Cure for 45 minutes@55-60°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2210513
Expiry date:
31/10/2027

Approval Holder:
Ar-tex SpA
Company Name
Ar-tex SpA
Address
Via Rasetti 12 24060 Viadanica Bergamo
Country
Italy
Phone
+39 035 939 711
General Email
info@ar-tex.it

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 849 of 2278

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.