Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2309080

Range of copper end feed solder fittings for use with copper tube (EN1057). For above and below ground use. Maximum working pressure for sizes 8mm to 54mm is 25.0 bar. Maximum working pressure for sizes above 54mm is 16.0 bar. Maximum operating temperature 99°C.

Section:: 1210 Fittings for use with Tube and Pipe
Section Subtitle:: End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2309080
Size:: See models
Marking:: Brymec logo & size on fitting body.
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: 15 30014 COUPLER 22 30015 COUPLER 28 30016 COUPLER 35 30017 COUPLER 42 30018 COUPLER 54 30019 COUPLER 67 30020 COUPLER 76 30021 COUPLER 108 30022 COUPLER 22 x 15 30122 REDUCING COUPLING 28 x 22 30123 REDUCING COUPLING 28 x 15 30116 REDUCING COUPLING 35 x 22 30118 REDUCING COUPLING 35 x 28 30124 REDUCING COUPLING 42 x 22 30125 REDUCING COUPLING 42 x 28 30126 REDUCING COUPLING 42 x 35 30127 REDUCING COUPLING 54 x 35 30128 REDUCING COUPLING 54 x 42 30132 REDUCING COUPLING 15 x 10 30095 FITTING REDUCER 22 x 15 30097 FITTING REDUCER 28 x 15 30098 FITTING REDUCER 28 x 22 30099 FITTING REDUCER 35 x 15 30100 FITTING REDUCER 35 x 22 30101 FITTING REDUCER 35 x 28 30102 FITTING REDUCER 42 x 15 30107 FITTING REDUCER 42 x 22 30108 FITTING REDUCER 42 x 28 30103 FITTING REDUCER 42 x 35 30104 FITTING REDUCER 54 x 15 30109 FITTING REDUCER 54 x 22 30110 FITTING REDUCER 54 x 28 30111 FITTING REDUCER 54 x 35 30105 FITTING REDUCER 54 x 42 30106 FITTING REDUCER 67 x 28 30023 FITTING REDUCER 67 x 35 30024 FITTING REDUCER 67 x 42 30025 FITTING REDUCER 67 x 54 30114 FITTING REDUCER 76 x 35 30026 FITTING REDUCER 76 x 42 30027 FITTING REDUCER 76 x 54 30088 FI TTING REDUCER 76 x 67 30089 FITTING REDUCER 108 x 54 30091 FITTING REDUCER 15 30030 90° ELBOW 22 30031 90° ELBOW 28 30032 90° ELBOW 35 30033 90° ELBOW 42 30034 90° ELBOW 54 30035 90° ELBOW 67 30036 90° ELBOW 76 30037 90° ELBOW 108 30038 90° ELBOW 15 30129 90° STREET ELBOW 22 30130 90° STREET ELBOW 28 30131 90° STREET ELBOW 35 30133 90° STREET ELBOW 42 30134 90° STREET ELBOW 54 30135 90° STREET ELBOW 15 30063 45° ELBOW 22 30064 45° ELBOW 28 30065 45° ELBOW 35 30066 45° ELBOW 42 30067 45° ELBOW 54 30068 45° ELBOW 67 30069 45° ELBOW 76 30070 45° ELBOW 108 30071 45° ELBOW 15 30144 45° STREET ELBOW 22 30145 45° STREET ELBOW 28 30146 45° STREET ELBOW 35 30147 45° STREET ELBOW 42 30148 45° STREET ELBOW 54 30149 45° STREET ELBOW 15 30275 SLIP COUPLING 22 30276 SLIP COUPLING 28 30277 SLIP COUPLING 35 30278 SLIP COUPLING 42 30279 SLIP COUPLING 54 30280 SLIP COUPLING 15 x ½” 30152 IMPERIAL TO METRIC COUPLER 22 x ¾” 30153 IMPERIAL TO METRIC COUPLER 28 x 1” 30154 IMPERIAL TO METRIC COUPLER 15 30047 EQUAL TEE 22 30048 EQUAL TEE 28 30049 EQUAL TEE 35 30050 EQUAL TEE 42 30051 EQUAL TEE 54 30052 EQUAL TEE 67 30053 EQUAL TEE 76 30054 EQUAL TEE 108 30055 EQUAL TEE 22 x 22 x 15 30207 REDUCING TEE 28 x 28 x 15 30211 REDUCING TEE 28 x 28 x 22 30212 REDUCING TEE 35 x 35 x 15 30223 REDUCING TEE 35 x 35 x 22 30213 REDUCING TEE 35 x 35 x 28 30229 REDUCING TEE 42 x 42 x 15 30242 REDUCING TEE 42 x 42 x 22 30214 REDUCING TEE 42 x 42 x 28 30243 REDUCING TEE 42 x 42 x 35 30215 REDUCING TEE 54 x 54 x 15 30253 REDUCING TEE 54 x 54 x 22 30254 REDUCING TEE 54 x 54 x 28 30246 REDUCING TEE 54 x 54 x 35 30216 REDUCING TEE 54 x 54 x 42 30217 REDUCING TEE 67 x 67 x 28 30248 REDUCING TEE 67 x 67 x 35 30255 REDUCING TEE 67 x 67 x 42 30256 REDUCING TEE 67 x 67 x 54 30218 REDUCING TEE 76 x 76 x 28 30257 REDUCING TEE 76 x 76 x 35 30262 REDUCING TEE 76 x 76 x 42 30263 REDUCING TEE 76 x 76 x 54 30264 REDUCING TEE 76 x 76 x 67 30265 REDUCING TEE 108 x 108 x 54 30271 REDUCING TEE 108 x 108 x 67 30272 REDUCING TEE 108 x 108 x 76 30273 REDUCING TEE 22 x 15 x 15 30205 REDUCING TEE 22 x 15 x 22 30206 REDUCING TEE 28 x 15 x 15 30198 REDUCING TEE 28 x 15 x 22 30219 REDUCING TEE 28 x 15 x 28 30209 REDUCING TEE 28 x 22 x 15 30220 REDUCING TEE 28 x 22 x 22 30208 REDUCING TEE 28 x 22 x 28 30210 REDUCING TEE 35 x 22 x 22 30225 REDUCING TEE 35 x 22 x 35 30228 REDUCING TEE 35 x 28 x 22 30226 REDUCING TEE 35 x 28 x 28 30227 REDUCING TEE 35 x 28 x 35 30232 REDUCING TEE 42 x 28 x 28 30235 REDUCING TEE 54 x 42 x 42 30247 REDUCING TEE 15 x 15 x 22 30204 REDUCING TEE 22 x 22 x 28 30197 REDUCING TEE 28 x 28 x 35 30221 REDUCING TEE 15 30079 STOP END 22 30080 STOP END 28 30081 STOP END 35 30082 STOP END 42 30083 STOP END 54 30084 STOP END 67 30085 STOP END 76 30086 STOP END 108 30087 STOP END 15 30230 FULL CROSS OVER 22 30231 FULL CROSS OVER 15 30237 PARTIAL CROSS OVER 22 30238 PARTIAL CROSS OVER

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Redlands , Coulsdon, Surrey
Postcode
CR5 2HT
Country
United Kingdom
General Email
Jeremy.douglas@brymec.com

View All Listings by this Company

WRAS Approval Number: #240402716

Range of dual flush syphonic WC flush valves. Cold water use only.

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 240402716
Size:: 1 1/2” BSP (M)
Marking:: Flomasta (Brand of Kingfisher) on top of cap WRAS on body
Installation Requirements:: R001 R571 R581
Expiry date:: 30/04/2029
Model:: C10100849 & C10100850

Approval Holder:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square Paddington, London
Postcode
W2 6PX

View All Listings by this Company

WRAS Approval Number: #240402717

Range of dual flush syphonic WC flush valves. Cold water use only.

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 240402717
Size:: 1 1/2” BSP (M)
Marking:: Flomasta (Brand of Kingfisher) on top of cap WRAS on body
Installation Requirements:: R001 R571 R581
Expiry date:: 30/04/2029
Model:: C10100849 & C10100850

Approval Holder:: Kingfisher International Products B.V

Company Name
Kingfisher International Products B.V
Address
Rapenburgerstraat 175E, 1011 VM Amsterdam
Country
Netherlands

View All Listings by this Company

WRAS Approval Number: #2011116

Dual flush, WC outlet valves. Model A2706 is operated via a push button assembly for either full or reduced flush. Maximum operating temperature. Cold water use only.

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 2011116
Size:: 2” BSP (M)
Marking:: Flomasta, WRAS logo on body.
Installation Requirements:: R001
Expiry date:: 30/11/2025
Model:: 5059340756790 5059340756479

Approval Holder:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square Paddington, London
Postcode
W2 6PX

View All Listings by this Company

WRAS Approval Number: #240504713

Range of direct fired water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:: 1400 Heaters
Section Subtitle:: Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:: 240504713
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: Company logo (AO Smith), model, and technical information on body.
Installation Requirements:: R001 R140
Expiry date:: 31/05/2029
Model:: IR 12-160,IR 12-200,IR 20-160,IR 20-200,IR 24-245,IR 24-285,IR 32-245,IR 32-285 & IR 32-380

Product Images

Approval Holder:: A.O.Smith Water Products Company B.V.

Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:: A.O.Smith Water Products Company B.V.

Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

WRAS Approval Number: #240504714

Range of direct gas fired condensing storage water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:: 1400 Heaters
Section Subtitle:: Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:: 240504714
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: Company logo (A.O. Smith), model and technical information on body
Installation Requirements:: R001 R140
Expiry date:: 31/05/2029
Model:: BFC 28, BFC 30, BFC 50, BFC 60, BFC 80, BFC 100, BFC 120, SGS 28, SGS 30,SGS 50, SGS 60, SGS 80, SGS 100 & SGS 120

Product Images

Approval Holder:: A.O.Smith Water Products Company B.V.

Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:: A.O.Smith Water Products Company B.V.

Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

WRAS Approval Number: #240504715

Range of solar assisted direct gas fired condensing storage water heaters with an enamel lining and a titanium anode incorporating a solar heat exchanger (max. working pressure 6,0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:: 1400 Heaters
Section Subtitle:: Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:: 240504715
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1½” BSP(M) inlet.
Marking:: Company logo (AO Smith), model and technical information on body.
Installation Requirements:: R001 R140
Expiry date:: 31/05/2029
Model:: SGE 40 & SGE 60

Product Images

Approval Holder:: A.O.Smith Water Products Company B.V.

Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:: A.O.Smith Water Products Company B.V.

Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

WRAS Approval Number: #240504716

Range of indirect water heaters with an enamel lining, a magnesium sacrificial anode and single wall spiral heat exchanger (maximum working pressure 6.0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 7.0 bar. Maximum operating temperature 80°C

Section:: 1400 Heaters
Section Subtitle:: Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:: 240504716
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (F)
Marking:: Company logo (AO Smith), model and technical information on body.
Installation Requirements:: R001 R140
Expiry date:: 31/05/2029
Model:: IT 1500, IT 2000, IT 2500, IT 3000, ST 1500, ST 2000, ST 2500 & ST 3000

Product Images

Approval Holder:: A.O.Smith Water Products Company B.V.

Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:: A.O.Smith Water Products Company B.V.

Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

WRAS Approval Number: #240504717

Range of direct gas fired condensing water heaters with a stainless steel body. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:: 1400 Heaters
Section Subtitle:: Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:: 240504717
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (F)
Marking:: Company logo (AO Smith), model and technical information on body.
Installation Requirements:: R001 R140
Expiry date:: 31/05/2029
Model:: TWI 35-200 & TWI 45-200

Product Images

Approval Holder:: A.O.Smith Water Products Company B.V.

Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:: A.O.Smith Water Products Company B.V.

Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

WRAS Approval Number: #240504718

Range of stainless steel lined direct water heaters fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:: 1400 Heaters
Section Subtitle:: Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:: 240504718
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1½” BSP (M)
Marking:: Company logo (AO Smith), model and technical information on body.
Installation Requirements:: R001 R140
Expiry date:: 31/05/2029
Model:: IT 300, IT 400, IT 500, IT 600, IT 750, IT 1000, ITE 400, ITE 500, ITE 600, ITE 750, ITE 1000, ITS 300, ITS 400, ITS 500, ITS 600, ITS 750, ITS 1000, ST 300, ST 400, ST 500, ST 600, ST 750 & ST 1000

Product Images

Approval Holder:: A.O.Smith Water Products Company B.V.

Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:: A.O.Smith Water Products Company B.V.

Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company