'3959 sellador de roscas alta resistencia'. Green coloured anaerobic adhesive. For use with water up to 85°C. This product is to be applied and cured in strict accordance with the manufacturer's instructions

Section:

5520 Sealants - Screwed Joints

Section Subtitle:

Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions

WRAS Approval Number:

250755013

Expiry date:

31/07/2030

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Country

Spain

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company

'Weld-On® 795™'. Clear solvent cement, intended to join PVC pipe and fittings. Apply as per manufacturer's data sheet '795-07-2025'. Cure for 4 hours at 5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5560 Solvent Cements

Expiry date:

31/05/2030

Approval Holder:

IPS Corporation

Company Name

IPS Corporation

Address

445 W. Victoria Street, Compton, California 90220

Country

USA

Phone

(310) 898-3300

General Email

info@ipscorp.com

View All Listings by this Company

Range of single hole, double outlet (fixed) combination tap assemblies (various finishes) with electronically controlled functions to allow the tap to dispense boiling water, chilled water or sparkling water from under counter units (not supplied). All models incorporate a separate vent outlet within the tap spout for the near-boiling water circuit. Near-boiling circuit has a maximum operating temperature 98°C. Hot-water circuit has a maximum operating temperature of 65°C.

Section:

0683 Combination Tap Assemblies

Section Subtitle:

Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.

WRAS Approval Number:

250602049

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only. No flow control device, ‘control centre’ or under-counter units are included as part of this approval. R160 applies to the sparkling water connection only.

Size:

6.35mm LLDPE pipe/ silicone flexible pipe ID 7.7mm x OD 10.95mm

Marking:

Zip logo on tap body.

Installation Requirements:

R001 R006 R009 R010 R160

Expiry date:

30/06/2030

Model:

Chilled water only: 91521 HydroTap Classic Chilled Bright Chrome, 91589 HydroTap Classic Chilled Brushed Chrome, 91591 HydroTap Classic Chilled Matt Black, 91611 HydroTap Wave Chilled Bright Chrome, 91623 HydroTap Classic Plus Chilled Bright Chrome, 91623Z01 HydroTap Classic Plus Chilled Brushed Chrome, 91623Z03 HydroTap Classic Plus Chilled Matt Black. Boiling water only: 91517 HydroTap Classic Boiling Bright Chrome, 91583 HydroTap Classic Boiling Brushed Chrome, 91585 HydroTap Classic Boiling Matt Black, 91607 HydroTap Wave Boiling Bright Chrome, 91619 HydroTap Classic Plus Boiling Bright Chrome, 91619Z01 HydroTap Classic Plus Boiling Brushed Chrome, 91619Z03 HydroTap Classic Plus Boiling Matt Black. Boiling & ambient water: 91518 HydroTap Classic Boiling Ambient Bright Chrome, 91586 HydroTap Classic Boiling Ambient Brushed Chrome, 91588 HydroTap Classic Boiling Ambient Matt Black, 91608 HydroTap Wave Boiling Ambient Bright Chrome, 91620 HydroTap Classic Plus Boiling Ambient Bright Chrome, 91620Z01 HydroTap Classic Plus Boiling Ambient Brushed Chrome, 91620Z03 HydroTap Classic Plus Boiling Ambient Matt Black. Boiling & chilled water: 95272 HydroTap Classic Boiling Chilled Bright Chrome, 91569 HydroTap Classic Boiling Chilled Brushed Chrome, 91582 HydroTap Classic Boiling Chilled Matt Black, 91609Z00 HydroTap Wave Boiling Chilled Bright Chrome, 91609Z03 HydroTap Wave Boiling Chilled Matt Black, 91621Z00 HydroTap Classic Plus Boiling Chilled Bright Chrome, 91621Z01 HydroTap Classic Plus Boiling Chilled Brushed Chrome, 91621Z03 HydroTap Classic Plus Boiling Chilled Matt Black, 91621Z05 HydroTap Classic Plus Boiling Chilled Brushed Rose Gold, 91621Z07 HydroTap Classic Plus Boiling Chilled Brushed Gold, 91621Z11 HydroTap Classic Plus Boiling Chilled Brushed Nickel. Boiling, chilled & sparkling water: 91520 HydroTap Classic Boiling Chilled Sparkling Bright Chrome, 91566 HydroTap Classic Boiling Chilled Sparkling Brushed Chrome, 91581 HydroTap Classic Boiling Chilled Sparkling Matt Black, 91610 HydroTap Wave Boiling Chilled Sparkling Bright Chrome, 91610Z03 HydroTap Wave Boiling Chilled Sparkling Matt Black, 91622 HydroTap Classic Plus Boiling Chilled Sparkling Bright Chrome, 91622Z01 HydroTap Classic Plus Boiling Chilled Sparkling Brushed Chrome, 91622Z03 HydroTap Classic Plus Boiling Chilled Sparkling Matt Black, 91622Z07 HydroTap Classic Plus Boiling Chilled Sparkling Brushed Gold, 91622Z09 HydroTap Classic Plus Boiling Chilled Sparkling Gunmetal, 91622Z11 HydroTap Classic Plus Boiling Chilled Sparkling Brushed Nickel. Chilled & sparkling water: 91522 HydroTap Classic Chilled Sparkling Bright Chrome, 91592 HydroTap Classic Chilled Sparkling Brushed Chrome, 91594 HydroTap Classic Chilled Sparkling Matt Black, 91612 HydroTap Wave Chilled Sparkling Bright Chrome, 91624Z00 HydroTap Classic Plus Chilled Sparkling Bright Chrome, 91624Z01 HydroTap Classic Plus Chilled Sparkling Brushed Chrome, 91624Z03 HydroTap Classic Plus Chilled Sparkling Matt Black. Models added October 2025: Boiling & chilled water: 90887 HydroTap Boiling Chilled 2 Button Top Touch Industrial Tap, 90835 HydroTap 3 Button Industrial Side Touch Tap Boiling Chilled with safety button.

Product Images

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Manufacturer:

Zip Industries (Aust) Pty Ltd.

Company Name

Zip Industries (Aust) Pty Ltd.

Address

67 Allingham Street Condell Park NSW 2200

Country

Australia

General Email

View All Listings by this Company

Range of hand showers and shower arm kits with (brass bodies - various finishes. The inlets of the hand showers and the inlet elbows incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Open outlet use only. Maximum operating temperature 65°C.

Section:

1670 Shower Outlets

Section Subtitle:

Shower kit(s)

WRAS Approval Number:

250602017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP female (with a ½” BSPP male adaptor for international use) for hand showers. 1/2" NPT male for shower arm.

Marking:

Waterworks logo on handset (BHS010, HNHS010 & CNHS10) Waterworks on escutcheon (BHS010 & BSH001CO)

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

Hand Showers: BHS010XZZ BHS010ZZ HNHS010ZZ CNHS10ZZ Shower Arm: BSH001XZZ Where XX denotes the finish and can be replaced by: AC = Antique Copper AB = Architectural Bronze AQB = Antique Brass BZ = Architectural Bronze C = Polished Chrome CO = Concordia DN = Dark Nickel G = Gold L = Lumin M = Matte Nickel MC = Matte Chrome MG = Matte Gold MS = Matte Silver N = Polished Nickel S = Silver SC = Shiny Copper SO = Sovereign UB = Unlacquered Brass Where XX denotes the handle components and can be replaced by: 0 = Less Handles 1 = Cross Handle 2 = Two‐Tone Cross Handle 3 = Coin Edge Cross Handle 10 = Solo Series Lever Handle 11 = Lever Handle 12 = Two‐Tone Lever Handle 13 = Coin Edge Lever Handle 14 = Walnut Lever Handle 15 = Leather Lever Handle 20 = Solo Series Straight Lever Handle 2A = Tandem Series Guilloche Lines Lever Handle 2B = Tandem Series Two‐Tone Lever Handle 2C = Union Series Guilloche Link Lever Handle 2D = Union Series Enamel Guilloche Lines Lever Handle 2E = Union Series Guilloche Pinstripe Lever Handle 2P = Solo Series Two‐Piece Straight Lever Handle 2S = Bond Rally Series Lever Handle 2T = Teak Lever Handle 30 = Solo Series Knob Handle 3S = Bond Rally Series Knob Handle 4A = Tandem Series Guilloche Lines Knob Handle 4B = Tandem Series Two‐Tone Guilloche Knob Handle 4D = Union Series Enamel Guilloche Lines Knob Handle 5C = Union Series Guilloche Link Knob Handle 7A = Tandem Series Guiloche Lines Lever handles with Gland Cover 7B = Tandem Series Two Tone Lever handles with Gland Cover 7C = Union Series Guiloche Link Lever handles with Gland Cover 7D = Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E = Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P = Solo Series Two Piece Straight Lever handle with Gland Cover 7S = Bond Rally Series Lever Handle With Gland Cover 7T = Tandem Series Teak lever with Gland Cover 8Z = Straight Lever Handle 90 = Solo Series Straight Lever handles with Gland Cover

Product Images

Approval Holder:

Waterworks

Company Name

Waterworks

Address

60 Backus Ave, Danbury, CT 06810

Country

USA

Phone

(203) 546 6140

View All Listings by this Company

Range of wall mounted shower valves (brass bodies – various finishes) incorporating a self-cancelling diverter with a ceramic cartridge headwork controlling flow and temperature and a single lever operating member. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

2003 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control, incorporating a self-cancelling diverter between outlets.

WRAS Approval Number:

250602018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP F

Marking:

Grohe logo on operating member

Installation Requirements:

R001 R030

Expiry date:

30/06/2030

Model:

24.336.xx1 32.747.xx1 29.079.xx1 001 – Chrome DC1 – Super steel DA1 – Warm sunset AL1 – Brushed hard graphite. GL1 – cool sunrise

Product Images

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company