Floguard range of in-line non-verifiable double check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a DZR brass body (FLOW230002 model is nickel plated). Compression models are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16.0 Bar Maximum operating temperature: 65°C

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

250302722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Reliance Worldwide Corporation ‘R’ logo, flow arrow, CR & size on body

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

440 00 04 Double Check Valve - 15mm compression inlet/outlet 440 00 08 Double Check Valve - 28mm compression inlet/outlet 440 01 04 Double Check Valve - ½” BSP (F) inlet/outlet 440 01 06 Double Check Valve - ¾” BSP (F) inlet/outlet 440 01 08 Double Check Valve - 1” BSP (F) inlet/outlet 440 01 10 Double Check Valve - 1¼” BSP (F) inlet/outlet 440 01 12 Double Check Valve - 1½” BSP (F) inlet/outlet 440 01 16 Double Check Valve - 2” BSP (F) inlet/outlet

Approval Holder:

Oventrop UK Limited

Company Name

Oventrop UK Limited

Address

Oventrop House Unit 11 Hatch Industrial Park Greywell Road Hatch Basingstoke

Postcode

RG24 7NG

Country

United Kingdom

Phone

+44 (0) 1256 330 441

General Email

mikewise@oventrop.co.uk

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of In-line plastic flow regulators housed within a brass bodies incorporating a plastic strainer and EPDM ‘O’-rings. Maximum working pressure 10.0 Bar Maximum operating temperature 65°C.

Section:

0435 Taps and shower valves - Components

Section Subtitle:

Aerators, Flow Straighteners, Flow Regulators and Restrictors.

WRAS Approval Number:

250688004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

HL2024, model and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

"HL2024 Control Flow 1P– ½” BSP (F) HL2024 Control Flow 1P– ½” BSP (M) HL2024 Control Flow 1P– 15mm HL2024 Control Flow 1P– ¾” BSP (M) HL2024 Control Flow 3P – 15mm HL2024 Thermastream – ¾” BSP (M) HL2024 Thermastream – S7.5 ½” BSP (M)

Approval Holder:

Cenergist Ltd

Company Name

Cenergist Ltd

Address

8 Bede House Tower Road, Glover Industrial Estate, Washington, England

Postcode

NE37 2SH

Country

United Kingdom

View All Listings by this Company

Range of ceramic cartridge headworks with plastic bodies for insertion into specifically dimensioned tap assemblies. Some models incorporate a stainless-steel strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

241015018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

92437: Ø 34.7mm, 38285: Ø 39.8mm.

Marking:

Chaoling and WRAS on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

35G1-HEADWORKS 92437 40G1-HEADWORKS 38285

Product Images

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Section:

0442 Thermostatic cartridges

Description:

A Range of Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/07/2030

Product Images

Approval Holder:

Taizhou Xingle Plumbing Equipment Co., Ltd

Company Name

Taizhou Xingle Plumbing Equipment Co., Ltd

Address

Southeast Industrial Agglomeration Point, Songmen Town, Wenling City

Postcode

317511

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Xingle Plumbing Equipment Co., Ltd.

Range of single hole, single outlet, (swivel), combination tap assemblies (chromium plated brass bodies), incorporating quarter turn ceramic disc headworks and single lever operating members. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

2311378

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. 15mm compression – (137040 models only)

Marking:

WIX on Body

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2028

Model:

173904 Loose Coil Tap Brushed 137040BN

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

2311379

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression connections.

Marking:

WIX on Body

Installation Requirements:

R001 R090

Expiry date:

30/11/2028

Model:

170100 Simeto Mono Mixer 311150 Simeto Monobloc Pull out Kitchen Mixer Chrome

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener or a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240988032

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

nabis on operating member

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2029

Model:

A05668 & A05669

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK3 Tap Gap IRN R160 only applies to SL-T10102

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010 R160

Expiry date:

31/07/2030

Notes & Further Information

Various finish: (1) Without suffix to current model number: Chrome plated (2) With suffix B: Black (3) With suffix BB: Brushed brass (4) Models SL-T40202 & SL-T40102W with suffix G: Champagne Gold

Product Images

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Stainless Steel braided EPDM lined inlet hoses Click-waste not verified by test. Capable of achieving AUK3 Tap gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Stainless Steel braided EPDM lined inlet hoses. Click type waste not verified by test. Capable of achieving AUK3 Tap gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company